xref: /src/sys/arch/amiga/dev/msc.c

/*	$NetBSD: msc.c,v 1.2 1995/10/07 18:18:26 chopps Exp $ */

/*
 * Copyright (c) 1993 Zik.
 * Copyright (c) 1995 Jukka Marin <jmarin (at) teeri.jmp.fi>.
 * Copyright (c) 1995 Timo Rossi <trossi (at) jyu.fi>.
 * Copyright (c) 1995 Rob Healey <rhealey (at) kas.helios.mn.org>.
 * Copyright (c) 1982, 1986, 1990 The Regents of the University of California.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *   - converted from NetBSD Amiga serial driver to A2232 serial driver
 *     by zik 931207
 *   - added ttyflags hooks rfh 940419
 *   - added new style config support rfh 940601
 *   - added code to halt board during memory load so board doesn't flip
 *     out. /dev/reload works now. Also created mschwiflow function so BSD can
 *     attempt to use board RTS flow control now. rfh 950108
 *   - Integrated work from Jukka Marin <jmarin (at) jmp.fi> and
 *     Timo Rossi <trossi (at) jyu.fi> The mscmint() code is Jukka's. 950916
 *     Integrated more bug fixes by Jukka Marin <jmarin (at) jmp.fi> 950918
 *     Also added Jukka's turbo board code. 950918
 *   - Reformatted to NetBSD style format.
 */

#include "msc.h"

#if NMSC > 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/tty.h>
#include <sys/proc.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/malloc.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/device.h>

#include <amiga/amiga/device.h>
#include <amiga/dev/zbusvar.h>
#include <amiga/dev/mscreg.h>
#include "machine/cpu.h"

#include <amiga/amiga/custom.h>
#include <amiga/amiga/cia.h>
#include <amiga/amiga/cc.h>

/* 6502 code for A2232 card */
#include "msc6502.h"

/*
 * Note: These are Zik's original comments:
 * There is a bit of a "gotcha" concerning the numbering
 * of msc devices and the specification of the number of serial
 * lines in the kernel.
 *
 * Each board has seven lines, but for programming convenience
 * and compatibility with Amiga UNIX the boards' minor device
 * numbers are allocated in groups of sixteen:
 *
 *                     minor device numbers
 * First board		0  2  4  6  8 10 12
 * Second board        16 18 20 22 24 26 28
 * Third board	       32 34 36 38 40 42 44
 *
 * The intermediate minor device numbers are dialin versions
 * of the same devices. ie. 10 is dialout line 6 and 11 is
 * the dialin version of line 6.
 *
 * On the other hand, I have made the NMSC config option refer
 * to the total number of a2232 cards, not the maximum
 * minor device number. So you might have NMSC=3, in which case
 * you have three boards with minor device numbers from 0 to 45.
 */

int	mscparam();
int	mscstart __P((struct tty *));
int	mschwiflow __P((struct tty *, int));
int	mscinitcard __P((struct zbus_args *));

int	mscdefaultrate = TTYDEF_SPEED;

struct	mscdevice mscdev[MSCSLOTS];	/* device structs for all lines */
struct	tty *msc_tty[MSCTTYS];		/* ttys for all lines */

struct	vbl_node msc_vbl_node[NMSC];	/* vbl interrupt node per board */

struct speedtab mscspeedtab_normal[] = {
	0,	0,
	50,	MSCPARAM_B50,
	75,	MSCPARAM_B75,
	110,	MSCPARAM_B110,
	134,	MSCPARAM_B134,
	150,	MSCPARAM_B150,
	300,	MSCPARAM_B300,
	600,	MSCPARAM_B600,
	1200,	MSCPARAM_B1200,
	1800,	MSCPARAM_B1800,
	2400,	MSCPARAM_B2400,
	3600,	MSCPARAM_B3600,
	4800,	MSCPARAM_B4800,
	7200,	MSCPARAM_B7200,
	9600,	MSCPARAM_B9600,
	19200,	MSCPARAM_B19200,
	115200,	MSCPARAM_B115200,
	-1,	-1
};

struct speedtab mscspeedtab_turbo[] = {
	0,	0,
	100,	MSCPARAM_B50,
	150,	MSCPARAM_B75,
	220,	MSCPARAM_B110,
	269,	MSCPARAM_B134,
	300,	MSCPARAM_B150,
	600,	MSCPARAM_B300,
	1200,	MSCPARAM_B600,
	2400,	MSCPARAM_B1200,
	3600,	MSCPARAM_B1800,
	4800,	MSCPARAM_B2400,
	7200,	MSCPARAM_B3600,
	9600,	MSCPARAM_B4800,
	14400,	MSCPARAM_B7200,
	19200,	MSCPARAM_B9600,
	38400,	MSCPARAM_B19200,
	230400,	MSCPARAM_B115200,
	-1,	-1
};

struct   speedtab *mscspeedtab;

int mscmctl __P((dev_t dev, int bits, int howto));
void mscmint __P((register void *data));

int mscmatch __P((struct device *, struct cfdata *, void *));
void mscattach __P((struct device *, struct device *, void *));

#define	SWFLAGS(dev)	(msc->openflags | (MSCDIALIN(dev) ? 0 : TIOCFLAG_SOFTCAR))
#define	DEBUG_MSC	0
#define	DEBUG_CD	0

struct cfdriver msccd = {
	NULL, "msc", (cfmatch_t) mscmatch, mscattach, DV_TTY,
	sizeof(struct device), NULL, 0
};

#if DEBUG_MSC
void
bugi(msc, string)
	struct mscdevice *msc;
	char *string;
{
	volatile struct mscstatus *ms;
	volatile struct mscmemory *mscmem;

	mscmem = msc->board;
	ms = &mscmem->Status[msc->port];

	printf("msc  %s u%d f%08lx F%08lx\n", string, msc->port, msc->flags,
		msc->openflags);
	printf("msc  h%d t%d H%d t%d p%02x c%02x CD%02x\n", ms->InHead,
		ms->InTail, ms->OutHead, ms->OutTail, ms->Param, ms->Command,
		ms->chCD);
	printf("msc  a%02x b%02x c%02x\n", ms->Pad_a, ms->Pad_b, ms->Padc);

	return
}

#endif

int
mscmatch(pdp, cdp, auxp)
	struct device *pdp;
	struct cfdata *cdp;
	void *auxp;
{
	struct zbus_args *zap;

	zap = auxp;
	if (zap->manid == 514 && (zap->prodid == 70 || zap->prodid == 69))
		return(1);

	return (0);
}

void
mscattach(pdp, dp, auxp)
	struct device *pdp, *dp;
	void *auxp;
{
  volatile struct mscmemory *mscmem;
  struct mscdevice *msc;
  struct zbus_args *zap;
  int unit;
  int Count;

  zap = (struct zbus_args *)auxp;
  unit = dp->dv_unit;

  if (mscinitcard(zap) != 0) {
    printf("\nmsc%d: Board initialize failed, bad download code.\n", unit);
    return;
  }

  printf("\nmsc%d: Board successfully initialized.\n", unit);

  mscmem = (struct mscmemory *) zap->va;

  if (mscmem->Common.Crystal == MSC_UNKNOWN) {
	printf("msc%d: Unable to detect crystal frequency.\n", unit);
	return;
  }

  if (mscmem->Common.Crystal == MSC_TURBO) {
	printf("msc%d: Turbo version detected (%02x%02x:%d)\n", unit,
		mscmem->Common.TimerH, mscmem->Common.TimerL,
		mscmem->Common.Pad_a);
	mscspeedtab = mscspeedtab_turbo;
  } else {
	printf("msc%d: Normal version detected (%02x%02x:%d)\n", unit,
		mscmem->Common.TimerH, mscmem->Common.TimerL,
		mscmem->Common.Pad_a);
	mscspeedtab = mscspeedtab_normal;
  }

  /* XXX 8 is a constant */
  for (Count = 0; Count < 8 && MSCSLOTUL(unit, Count) < MSCSLOTS; Count++) {
    msc = &mscdev[MSCSLOTUL(unit, Count)];
    msc->board = mscmem;
    msc->port = Count;
    msc->flags = 0;
    msc->openflags = 0;
    msc->active = 1;
    msc->closing = FALSE;
    msc_tty[MSCTTYSLOT(MSCSLOTUL(unit, Count))] = NULL;
    msc_tty[MSCTTYSLOT(MSCSLOTUL(unit, Count))+1] = NULL;

  }

  /* disable the non-existant eighth port */
  if (MSCSLOTUL(unit, NUMLINES) < MSCSLOTS)
    mscdev[MSCSLOTUL(unit, NUMLINES)].active = 0;

  msc_vbl_node[unit].function = (void (*) (void *)) mscmint;
  msc_vbl_node[unit].data = (void *) unit;

  add_vbl_function (&msc_vbl_node[unit], MSC_VBL_PRIORITY, (void *)unit);

  return;
}

/* ARGSUSED */
int
mscopen(dev, flag, mode, p)
	dev_t dev;
	int flag, mode;
	struct proc *p;
{
  register struct tty *tp;
  int error = 0;
  int s;
  int slot;
  int ttyn;
  struct mscdevice *msc;
  volatile struct mscstatus *ms;

  /* get the device structure */
  slot = MSCSLOT(dev);
  ttyn = MSCTTY(dev);

  if (slot >= MSCSLOTS)
    return ENXIO;

  if (MSCLINE(dev) >= NUMLINES)
    return ENXIO;

  msc = &mscdev[slot];
  ms = &msc->board->Status[msc->port];

  if (!msc->active)
    return ENXIO;

  /*
   * RFH: WHY here? Put down by while like other serial drivers
   *      But if we do that it makes things bomb.
   */
  s = spltty();

  if (!msc_tty[ttyn]) {

      tp = ttymalloc();
      msc_tty[ttyn] = tp;
      msc_tty[ttyn+1] = (struct tty *)NULL;

#if 0
      /* default values are not optimal for this device, increase buffers. */
      clfree(&tp->t_rawq);
      clfree(&tp->t_canq);
      clfree(&tp->t_outq);
      clalloc(&tp->t_rawq, 8192, 1);
      clalloc(&tp->t_canq, 8192, 1);
      clalloc(&tp->t_outq, 8192, 0);
#endif

  }
  else
    tp = msc_tty[ttyn];

  tp->t_oproc = (void (*) (struct tty *)) mscstart;
  tp->t_param = mscparam;
  tp->t_dev = dev;
  tp->t_hwiflow = mschwiflow;

  /* if port is still closing, just bitbucket remaining characters */
  if (msc->closing) {

      ms->OutFlush = TRUE;
      msc->closing = FALSE;
  }

  /* initialize tty */
  if ((tp->t_state & TS_ISOPEN) == 0) {

      tp->t_state |= TS_WOPEN;
      ttychars(tp);
      if (tp->t_ispeed == 0) {

	  tp->t_iflag = TTYDEF_IFLAG;
	  tp->t_oflag = TTYDEF_OFLAG;
	  tp->t_cflag = TTYDEF_CFLAG;
	  tp->t_lflag = TTYDEF_LFLAG;
	  tp->t_ispeed = tp->t_ospeed = mscdefaultrate;
      }

      /* flags changed to be private to every unit by JM */
      if (msc->openflags & TIOCFLAG_CLOCAL)
		tp->t_cflag |= CLOCAL;
      if (msc->openflags & TIOCFLAG_CRTSCTS)
		tp->t_cflag |= CRTSCTS;
      if (msc->openflags & TIOCFLAG_MDMBUF)
		tp->t_cflag |= MDMBUF;

      mscparam(tp, &tp->t_termios);
      ttsetwater(tp);

      (void) mscmctl(dev, TIOCM_DTR | TIOCM_RTS, DMSET);

      if ((SWFLAGS(dev) & TIOCFLAG_SOFTCAR) ||
	  (mscmctl(dev, 0, DMGET) & TIOCM_CD))
            tp->t_state |= TS_CARR_ON;
      else
            tp->t_state &= ~TS_CARR_ON;

  }
  else {
        if (tp->t_state & TS_XCLUDE && p->p_ucred->cr_uid != 0) {
	    splx(s);
	    return (EBUSY);
       }
  }

  /*
   * if NONBLOCK requested, ignore carrier
   */
  if (flag & O_NONBLOCK)
    goto done;

  /*
   * s = spltty();
   *
   * This causes hangs when put here, like other TTY drivers do, rather than
   * above, WHY? RFH
   *
   */

  while ((tp->t_state & TS_CARR_ON) == 0 && (tp->t_cflag & CLOCAL) == 0) {

      tp->t_state |= TS_WOPEN;

#if DEBUG_CD
      printf("msc %ld waiting for CD\n", MSCLINE(dev));
#endif
      error = ttysleep(tp, (caddr_t)&tp->t_rawq, TTIPRI | PCATCH, ttopen, 0);

      if (error) {
               splx(s);
               return(error);
      }
  }

done:
#if DEBUG_CD
  printf("msc %ld waiting for CD\n", MSCLINE(dev));
#endif
  /* This is a way to handle lost XON characters */
  if ((flag & O_TRUNC) && (tp->t_state & TS_TTSTOP)) {
          tp->t_state &= ~TS_TTSTOP;
          ttstart (tp);
  }

  splx(s);

  /*
   * Reset the tty pointer, as there could have been a dialout
   * use of the tty with a dialin open waiting.
   */
  tp->t_dev = dev;

  return((*linesw[tp->t_line].l_open)(dev, tp));

}

int
mscclose(dev, flag, mode, p)
	dev_t dev;
	int flag, mode;
	struct proc *p;
{
  register struct tty *tp;
  int slot;
  volatile struct mscstatus *ms;
  struct mscdevice *msc;

  /* get the device structure */
  slot = MSCSLOT(dev);

  if (slot >= MSCSLOTS)
    return ENXIO;

  msc = &mscdev[slot];

  if (!msc->active)
    return ENXIO;

  ms = &msc->board->Status[msc->port];

#if DEBUG_MSC
  bugi(msc, "close1");
#endif

  tp = msc_tty[MSCTTY(dev)];
  (*linesw[tp->t_line].l_close)(tp, flag);

  (void) mscmctl(dev, 0, DMSET);

  ttyclose(tp);

  if (msc->flags & TIOCM_DTR)
    msc->closing = TRUE; /* flush remaining characters before dropping DTR */
  else
    ms->OutFlush = TRUE; /* just bitbucket remaining characters */

#if DEBUG_MSC
  bugi(msc, "close2");
#endif

  return (0);

}

int
mscread(dev, uio, flag)
	dev_t dev;
	struct uio *uio;
	int flag;
{
	register struct tty *tp;

	tp = msc_tty[MSCTTY(dev)];

	if (! tp)
	 return ENXIO;

	return((*linesw[tp->t_line].l_read)(tp, uio, flag));
}

int
mscwrite(dev, uio, flag)
	dev_t dev;
	struct uio *uio;
	int flag;
{
  register struct tty *tp;

  tp = msc_tty[MSCTTY(dev)];

  if (! tp)
    return ENXIO;

  return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
}

/*
 * This interrupt is periodically invoked in the vertical blank
 * interrupt. It's used to keep track of the modem control lines
 * and (new with the fast_int code) to move accumulated data up in
 * to the tty layer.
 *
 * NOTE: MSCCDHACK is an invention of mine for dubious purposes. If you
 *	 want to activate it add
 *	 options MSCCDHACK
 *	 in the kernel conf file. Basically it forces CD->Low transitions
 *	 to ALWAYS send a signal to the process, even if the device is in
 *	 clocal mode or an outdial device. RFH
 */
void
mscmint (data)
	register void *data;
{
  int unit;
  register struct tty *tp;
  int slot;
  int maxslot;
  struct mscdevice *msc;
  volatile struct mscstatus *ms;
  volatile u_char *ibuf, *cbuf;
  unsigned char newhead; /* was int */
  unsigned char bufpos;  /* was int */
  int s;

  unit = (int) data;

  /* check each line on this board */
  maxslot = MSCSLOTUL(unit, NUMLINES);
  if (maxslot > MSCSLOTS)
    maxslot = MSCSLOTS;

  for (slot = MSCSLOTUL(unit, 0); slot < maxslot; slot++)
    {
      msc = &mscdev[slot];

      if (!msc->active)
        continue;

      tp = msc_tty[MSCTTYSLOT(slot)];
      ms = &msc->board->Status[msc->port];

      newhead = ms->InHead;		/* 65c02 write pointer */

      /* yoohoo, is the port open? */
      if (tp && (tp->t_state & (TS_ISOPEN|TS_WOPEN))) {
	/* port is open, handle all type of events */

	/* set interrupt priority level */
        s = spltty();

      /* check for input for this port */
      if (newhead != (bufpos = ms->InTail))
      {
#if DEBUG_MSC
	      printf("iop%d\n",slot);
#endif
	      /* buffer for input chars/events */
	      ibuf = &msc->board->InBuf[msc->port][0];

	      /* data types of bytes in ibuf */
	      cbuf = &msc->board->InCtl[msc->port][0];

	      /* do for all chars, if room */
	      while (bufpos != newhead)
	      {
		  /* which type of input data? */
		  switch (cbuf[bufpos])
		  {
		      /* input event (CD, BREAK, etc.) */
		      case MSCINCTL_EVENT:
			switch (ibuf[bufpos++])
			{
			    /* carrier detect change OFF -> ON */
			    case MSCEVENT_CarrierOn:
#if DEBUG_CD
			      printf("msc  CD ON %d\n", msc->port);
#endif
			      msc->flags |= TIOCM_CD;
			      if (MSCDIALIN(tp->t_dev))
				(*linesw[tp->t_line].l_modem)(tp, 1);
			      break;

			    /*  carrier detect change ON -> OFF */
			    case MSCEVENT_CarrierOff:
#if DEBUG_CD
			      printf("msc  CD OFF %d\n", msc->port);
#endif
			      msc->flags &= ~TIOCM_CD;
#ifndef MSCCDHACK
			      if (MSCDIALIN(tp->t_dev))
#endif			    /* Note to format police: Don't merge the { below
			       in to the line above! */
			      {
				  if ((*linesw[tp->t_line].l_modem)(tp, 0) == 0)
				  {
				      /* clear RTS and DTR, bitbucket output */
				      ms->Command = (ms->Command & ~MSCCMD_CMask) | MSCCMD_Close;
				      ms->Setup = TRUE;
				      msc->flags &= ~(TIOCM_DTR | TIOCM_RTS);
				      ms->OutFlush = TRUE;
				  }
			      }
			      break;

			    case MSCEVENT_Break:
#if DEBUG_MSC
			      printf("Break received on msc%d\n", slot);
#endif
			      (*linesw[tp->t_line].l_rint)(TTY_FE, tp);
			      break;

			    default:
			      printf("msc: unknown event type %d\n",
				      ibuf[(bufpos-1)&0xff]);

			} /* event type switch */
			break;

		      case MSCINCTL_CHAR:
			 if (tp->t_state & TS_TBLOCK) {
			   if (ms->chCD) {
			     /* Carrier detect ON -> OFF */
#if DEBUG_CD
			     printf("msc  CD OFF blocked %d msc->flags %08lx\n",
				    msc->port, msc->flags);
#endif
			     msc->flags &= ~TIOCM_CD;

#ifndef MSCCDHACK
			     if (MSCDIALIN(tp->t_dev))
#endif
			     {
			       if ((*linesw[tp->t_line].l_modem)(tp, 0) == 0) {
				 /* Clear RTS and DTR, bitbucket output */
				 ms->Command = (ms->Command & ~MSCCMD_CMask) |
					       MSCCMD_Close;
				 ms->Setup = TRUE;
				 msc->flags &= ~(TIOCM_DTR | TIOCM_RTS);
				 ms->OutFlush = TRUE;
			       }
			     }
			   }
			   goto NoRoomForYa;
			 }
#if DEBUG_MSC
			 printf("'%c' ",ibuf[bufpos]);
#endif
			 (*linesw[tp->t_line].l_rint)((int)ibuf[bufpos++], tp);
			break;

		      default:
			printf("msc: unknown data type %d\n", cbuf[bufpos]);
			bufpos++;

		   } /* switch on input data type */

		} /* while there's something in the buffer */
NoRoomForYa:
	      ms->InTail = bufpos;		/* tell 65C02 what we've read */

	    } /* if there was something in the buffer */

	  /* we get here only when the port is open */
	  /* send output */
	   if (tp->t_state & (TS_BUSY|TS_FLUSH))
	    {

	      bufpos = ms->OutHead - ms->OutTail;

	      /* busy and below low water mark? */
	      if (tp->t_state & TS_BUSY)
	        {
	          if (bufpos < IOBUFLOWWATER)
		    {
		      tp->t_state &= ~TS_BUSY;	/* not busy any more */
		      if (tp->t_line)
		        (*linesw[tp->t_line].l_start)(tp);
		      else
		        mscstart(tp);
		    }
		}

	      /* waiting for flush and buffer empty? */
	      if (tp->t_state & TS_FLUSH)
	        {
	          if (bufpos == 0)
	            tp->t_state &= ~TS_FLUSH;	/* finished flushing */
	        }
	    } /* BUSY or FLUSH */

	     splx(s);

      } else { /* End of port open */
	/* port is closed, don't pass on the chars from it */

      /* check for input for this port */
      if (newhead != (bufpos = ms->InTail))
      {
#if DEBUG_MSC
	      printf("icp%d\n",slot);
#endif
	      /* buffer for input chars/events */
	      ibuf = &msc->board->InBuf[msc->port][0];

	      /* data types of bytes in ibuf */
	      cbuf = &msc->board->InCtl[msc->port][0];

	      /* do for all chars, if room */
	      while (bufpos != newhead)
	      {
		  /* which type of input data? */
		  switch (cbuf[bufpos])
		  {
		      /* input event (CD, BREAK, etc.) */
		      case MSCINCTL_EVENT:
			switch (ibuf[bufpos++])
			{
			    /* carrier detect change OFF -> ON */
			    case MSCEVENT_CarrierOn:
#if DEBUG_CD
			      printf("msc  CD ON %d (closed)\n", msc->port);
#endif
			      msc->flags |= TIOCM_CD;
			      break;

			    /*  carrier detect change ON -> OFF */
			    case MSCEVENT_CarrierOff:
#if DEBUG_CD
			      printf("msc  CD OFF %d (closed)\n", msc->port);
#endif
			      msc->flags &= ~TIOCM_CD;
#ifndef MSCCDHACK
			      if (tp && MSCDIALIN(tp->t_dev))
#else
			      if (tp )
#endif
			      {
				  if ((*linesw[tp->t_line].l_modem)(tp, 0) == 0)
				  {
				      /* clear RTS and DTR, bitbucket output */
				      ms->Command = (ms->Command & ~MSCCMD_CMask) | MSCCMD_Close;
				      ms->Setup = TRUE;
				      msc->flags &= ~(TIOCM_DTR | TIOCM_RTS);
				      ms->OutFlush = TRUE;
				  }
			      }
			      break;

			    default:
			      printf("msc: unknown event type %d\n",
				     ibuf[(bufpos-1)&0xff]);

			} /* event type switch */
			break;

		      default:
			bufpos++;

		   } /* switch on input data type */

		} /* while there's something in the buffer */

	        ms->InTail = bufpos;		/* tell 65C02 what we've read */

	    } /* if there was something in the buffer */
      } /* End of port open/close */

      /* is this port closing? */
      if (msc->closing)
        {
	  /* if DTR is off, just bitbucket remaining characters */
	  if ( (msc->flags & TIOCM_DTR) == 0)
	    {
	      ms->OutFlush = TRUE;
	      msc->closing = FALSE;
	    }
	  /* if output has drained, drop DTR */
          else if (ms->OutHead == ms->OutTail)
	    {
	      (void) mscmctl(tp->t_dev, 0, DMSET);
	      msc->closing = FALSE;
            }
        }
    }  /* For all ports */

}

int
mscioctl(dev, cmd, data, flag, p)
	dev_t dev;
	int cmd;
	caddr_t data;
	int flag;
	struct proc *p;
{
  register struct tty *tp;
  register int slot;
  register int error;
  struct mscdevice *msc;
  volatile struct mscstatus *ms;
  int s;

  /* get the device structure */
  slot = MSCSLOT(dev);

  if (slot >= MSCSLOTS)
    return ENXIO;

  msc = &mscdev[slot];

  if (!msc->active)
    return ENXIO;

  ms = &msc->board->Status[msc->port];
  if (!(tp = msc_tty[MSCTTY(dev)]))
    return ENXIO;

  error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);

  if (error >= 0)
    return (error);

  error = ttioctl(tp, cmd, data, flag, p);

  if (error >= 0)
    return (error);

  switch (cmd) {

      /* send break */
    case TIOCSBRK:
      s = spltty();
      ms->Command = (ms->Command & (~MSCCMD_RTSMask)) | MSCCMD_Break;
      ms->Setup = TRUE;
      splx(s);
      break;

      /* clear break */
    case TIOCCBRK:
      s = spltty();
      ms->Command = (ms->Command & (~MSCCMD_RTSMask)) | MSCCMD_RTSOn;
      ms->Setup = TRUE;
      splx(s);
      break;

    case TIOCSDTR:
      (void) mscmctl(dev, TIOCM_DTR | TIOCM_RTS, DMBIS);
      break;

    case TIOCCDTR:
      if (!MSCDIALIN(dev))	/* don't let dialins drop DTR */
        (void) mscmctl(dev, TIOCM_DTR | TIOCM_RTS, DMBIC);
      break;

    case TIOCMSET:
      (void) mscmctl(dev, *(int *)data, DMSET);
      break;

    case TIOCMBIS:
      (void) mscmctl(dev, *(int *)data, DMBIS);
      break;

    case TIOCMBIC:
      if (MSCDIALIN(dev))	/* don't let dialins drop DTR */
        (void) mscmctl(dev, *(int *)data & TIOCM_DTR, DMBIC);
      else
        (void) mscmctl(dev, *(int *)data, DMBIC);
      break;

    case TIOCMGET:
      *(int *)data = mscmctl(dev, 0, DMGET);
      break;

    case TIOCGFLAGS:
      *(int *)data = SWFLAGS(dev);
      break;

    case TIOCSFLAGS:
      error = suser(p->p_ucred, &p->p_acflag);
      if (error != 0)
              return(EPERM);

      msc->openflags = *(int *)data;

      /* only allow valid flags */
      msc->openflags &= (TIOCFLAG_SOFTCAR | TIOCFLAG_CLOCAL | TIOCFLAG_CRTSCTS);

      break;

    default:
      return (ENOTTY);
    }

  return (0);
}


int
mscparam(tp, t)
	register struct tty *tp;
	register struct termios *t;
{
  register int cfcr, cflag = t->c_cflag;
  int slot;
  struct mscdevice *msc;
  volatile struct mscstatus *ms;
  int s;
  int ospeed = ttspeedtab(t->c_ospeed, mscspeedtab);

  /* get the device structure */
  slot = MSCSLOT(tp->t_dev);

  if (slot >= MSCSLOTS)
    return ENXIO;

  msc = &mscdev[slot];

  if (!msc->active)
    return ENXIO;

  ms = &msc->board->Status[msc->port];

#if DEBUG_MSC
  bugi(msc, "param1");
#endif
  /* check requested parameters */
  if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed))
    return (EINVAL);

  /* and copy to tty */
  tp->t_ispeed = t->c_ispeed;
  tp->t_ospeed = t->c_ospeed;
  tp->t_cflag = cflag;

  /* hang up if baud is zero */
  if (t->c_ospeed == 0) {

      if (!MSCDIALIN(tp->t_dev))  /* don't let dialins drop DTR */
        (void) mscmctl(tp->t_dev, 0, DMSET);
  }
  else {

      /* set the baud rate */
      s = spltty();
      ms->Param = (ms->Param & ~MSCPARAM_BaudMask) | ospeed | MSCPARAM_RcvBaud;

      /* make sure any previous hangup is undone, ie.  reenable DTR.
       * also mscmctl will cause the speed to be set
       */
      (void) mscmctl (tp->t_dev, TIOCM_DTR | TIOCM_RTS, DMSET);

      splx(s);
  }

#if DEBUG_MSC
  bugi(msc, "param2");
#endif
  return (0);

}


/*
 *	Jukka's code initializes alot of stuff that other drivers don't
 *	I'm including it here so that this code is a common set of work
 *	done by both of us. rfh
 */
int
mschwiflow(tp, flag)
	struct tty *tp;
	int flag;
{

/* Rob's version */
#if 1
#if DEBUG_MSC
	printf("mschwiflow %d\n", flag);
#endif

	if (flag)
	   mscmctl( tp->t_dev, TIOCM_RTS, DMBIC); /* Clear/Lower RTS */
	else
	   mscmctl( tp->t_dev, TIOCM_RTS, DMBIS); /* Set/Raise RTS */

#endif

/* Jukka's version */
#if 0
  int slot;
  struct mscdevice *msc;
  volatile struct mscstatus *ms;
  int s;

  /* get the device structure */
  slot = MSCSLOT(tp->t_dev);
  if (slot >= MSCSLOTS)
    return ENXIO;
  msc = &mscdev[slot];
  if (!msc->active)
    return ENXIO;
  ms = &msc->board->Status[msc->port];

#if DEBUG_MSC
  bugi(msc, "hwiflow");
#endif
  /* Well, we should really _do_ something here, but the 65c02 code
   * manages the RTS signal on its own now, so...  This will probably
   * change in the future.
   */

#endif
	return 1;

}

int
mscstart(tp)
	register struct tty *tp;
{
  register int cc;
  register char *cp;
  register int mhead;
  int s;
  int slot;
  struct mscdevice *msc;
  volatile struct mscstatus *ms;
  volatile char *mob;
  int hiwat = 0;
  int maxout;

  if (! (tp->t_state & TS_ISOPEN))
    return;

  slot = MSCSLOT(tp->t_dev);

#if 0
  printf("starting msc%d\n", slot);
#endif

  s = spltty();

  /* don't start if explicitly stopped */
  if (tp->t_state & (TS_TIMEOUT|TS_TTSTOP))
    goto out;

  /* wake up if below low water */
  cc = tp->t_outq.c_cc;

  if (cc <= tp->t_lowat) {
      if (tp->t_state & TS_ASLEEP) {

	  tp->t_state &= ~TS_ASLEEP;
	  wakeup((caddr_t)&tp->t_outq);
	}

      selwakeup(&tp->t_wsel);
  }

  /* don't bother if no characters or busy */
  if (cc == 0 || (tp->t_state & TS_BUSY))
    goto out;

  /*
   * Limit the amount of output we do in one burst
   */
  msc = &mscdev[slot];
  ms = &msc->board->Status[msc->port];
  mhead = ms->OutHead;
  maxout = mhead - ms->OutTail;

  if (maxout < 0)
      maxout += IOBUFLEN;

  maxout = IOBUFLEN - 1 - maxout;

  if (cc >= maxout) {
      hiwat++;
      cc = maxout;
  }

  cc = q_to_b (&tp->t_outq, msc->tmpbuf, cc);

  if (cc > 0) {
      tp->t_state |= TS_BUSY;

      mob = &msc->board->OutBuf[msc->port][0];
      cp = &msc->tmpbuf[0];

      /* enable output */
      ms->OutDisable = FALSE;

#if 0
      msc->tmpbuf[cc] = 0;
      printf("sending '%s'\n", msctmpbuf);
#endif

      /* send the first char across to reduce latency */
      mob[mhead++] = *cp++;
      mhead &= IOBUFLENMASK;
      ms->OutHead = mhead;
      cc--;

      /* copy the rest of the chars across quickly */
      while (cc > 0) {
	  mob[mhead++] = *cp++;
	  mhead &= IOBUFLENMASK;
	  cc--;
      }
      ms->OutHead = mhead;

      /* leave the device busy if we've filled the buffer */
      if (!hiwat)
        tp->t_state &= ~TS_BUSY;
    }

out:
  splx(s);

}

/* XXX */
/*
 * Stop output on a line.
 */
/*ARGSUSED*/
int
mscstop(tp, flag)
	register struct tty *tp;
	int flag;			/* defaulted to int anyway */
{
	register int s;
	struct mscdevice *msc;
	volatile struct mscstatus *ms;

	s = spltty();
	if (tp->t_state & TS_BUSY) {
		if (tp->t_state & TS_TTSTOP == 0) {
			tp->t_state |= TS_FLUSH;
#if 0
			msc = &mscdev[MSCSLOT(tp->t_dev)];
			ms = &msc->board->Status[msc->port];
			printf("stopped output on msc%d\n", MSCSLOT(tp->t_dev));
			ms->OutDisable = TRUE;
#endif
		}
	}
	splx(s);
}

/*
 * bits can be: TIOCM_DTR, TIOCM_RTS, TIOCM_CTS, TIOCM_CD, TIOCM_RI, TIOCM_DSR
 */
int
mscmctl(dev, bits, how)
	dev_t dev;
	int bits, how;
{
  struct mscdevice *msc;
  volatile struct mscstatus *ms;
  int slot;
  int s;
  u_char newcmd;
  int OldFlags;

  /* get the device structure */
  slot = MSCSLOT(dev);

  if (slot >= MSCSLOTS)
    return ENXIO;

  msc = &mscdev[slot];

  if (!msc->active)
    return ENXIO;

#if DEBUG_MSC
  bugi(msc, "mctl1");
#endif

  s = spltty();		/* Jukka wants spl6() here, WHY?!! RFH */

  if (how != DMGET) {
      OldFlags = msc->flags;
      bits &= TIOCM_DTR | TIOCM_RTS; /* can only modify DTR and RTS */

      switch (how) {
        case DMSET:
	  msc->flags = (bits | (msc->flags & ~(TIOCM_DTR | TIOCM_RTS)));
          break;

        case DMBIC:
          msc->flags &= ~bits;
          break;

        case DMBIS:
          msc->flags |= bits;
          break;
      }

#if DEBUG_MSC
    bugi(msc, "mctl2");
#endif

      /* modify modem control state */
      ms = &msc->board->Status[msc->port];

      if (msc->flags & TIOCM_RTS)	/* was bits & */
	newcmd = MSCCMD_RTSOn;
      else			/* this doesn't actually work now */
	newcmd = MSCCMD_RTSOff;

      if (msc->flags & TIOCM_DTR)	/* was bits & */
	newcmd |= MSCCMD_Enable;

      ms->Command = (ms->Command & (~MSCCMD_RTSMask & ~MSCCMD_Enable)) | newcmd;
      ms->Setup = TRUE;

      /* if we've dropped DTR, bitbucket any pending output */
      if ( (OldFlags & TIOCM_DTR) && ((bits & TIOCM_DTR) == 0))
        ms->OutFlush = TRUE;
  }

  bits = msc->flags;

  (void) splx(s);

#if DEBUG_MSC
    bugi(msc, "mctl3");
#endif

  return(bits);

}

struct tty *
msctty(dev)
	dev_t dev;
{
	return(msc_tty[MSCTTY(dev)]);
}

/*
 * Load JM's freely redistributable A2232 6502c code. Let turbo detector
 * run for a while too.
 */

int
mscinitcard(zap)
	struct zbus_args *zap;
{
  int bcount;
  short start;
  u_char *from;
  volatile u_char *to;
  volatile struct mscmemory *mlm;

  mlm = (volatile struct mscmemory *)zap->va;
  (void)mlm->Enable6502Reset;

  /* copy the code across to the board */
  to = (u_char *)mlm;
  from = msc6502code; bcount = sizeof(msc6502code) - 2;
  start = *(short *)from; from += sizeof(start);
  to += start;

#if DEBUG_MSC
  printf("\n** copying %ld bytes from %08lx to %08lx (start=%04lx)\n",
	  (unsigned long)bcount, (unsigned long)from, to, start);
  printf("First byte to copy is %02lx\n", *from);
#endif

  while(bcount--) *to++ = *from++;

  mlm->Common.Crystal = MSC_UNKNOWN;	/* use automatic speed check */

  /* start 6502 running */
  (void)mlm->ResetBoard;

  /* wait until speed detector has finished */
  for (bcount = 0; bcount < 200; bcount++) {
	delay(10000);
	if (mlm->Common.Crystal) break;
  }

  return(0);

}

#endif  /* NMSC > 0 */