xref: /src/sys/arch/amiga/dev/sbicvar.h

/*	$NetBSD: sbicvar.h,v 1.3 1994/10/26 02:04:42 cgd Exp $	*/

/*
 * Copyright (c) 1990 The Regents of the University of California.
 * All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * Van Jacobson of Lawrence Berkeley Laboratory.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)scsivar.h	7.1 (Berkeley) 5/8/90
 */
#ifndef _SBICVAR_H_
#define _SBICVAR_H_

/*
 * The largest single request will be MAXPHYS bytes which will require
 * at most MAXPHYS/NBPG+1 chain elements to describe, i.e. if none of
 * the buffer pages are physically contiguous (MAXPHYS/NBPG) and the
 * buffer is not page aligned (+1).
 */
#define	DMAMAXIO	(MAXPHYS/NBPG+1)

struct	dma_chain {
	int	dc_count;
	char	*dc_addr;
};

struct	sbic_pending {
	TAILQ_ENTRY(sbic_pending) link;
	struct scsi_xfer *xs;
};

struct	sbic_softc {
	struct	device sc_dev;
	struct	target_sync {
		u_char	state;
		u_char	period;
		u_char	offset;
	} sc_sync[8];
	struct	scsi_link sc_link;	/* proto for sub devices */
	sbic_regmap_p	sc_sbicp;	/* the SBIC */
	volatile void 	*sc_cregs;	/* driver specific regs */
	TAILQ_HEAD(,sbic_pending) sc_xslist;	/* LIFO */
	struct	sbic_pending sc_xsstore[8][8];	/* one for every unit */
	struct	scsi_xfer *sc_xs;	/* transfer from high level code */
	u_char	sc_flags;
	u_char	sc_scsiaddr;
	u_char	sc_stat[2];
	u_char	sc_msg[7];
	u_long	sc_clkfreq;
	u_long	sc_tcnt;		/* number of bytes transfered */
	u_char *sc_dmabuffer;
	u_char *sc_dmausrbuf;
	u_long  sc_dmausrlen;
	u_short sc_dmacmd;		/* used by dma drivers */
	u_short	sc_dmatimo;		/* dma timeout */
	u_long	sc_dmamask;		/* dma valid mem mask */
	struct	dma_chain sc_chain[DMAMAXIO];
	struct	dma_chain *sc_cur;
	struct	dma_chain *sc_last;
	int  (*sc_dmago)	__P((struct sbic_softc *, char *, int, int));
	int  (*sc_dmanext)	__P((struct sbic_softc *));
	void (*sc_dmafree)	__P((struct sbic_softc *));
	void (*sc_dmastop)	__P((struct sbic_softc *));
	u_short	gtsc_bankmask;		/* GVP specific bank selected */
};

/* sc_flags */
#define	SBICF_ALIVE	0x01	/* controller initialized */
#define SBICF_DCFLUSH	0x02	/* need flush for overlap after dma finishes */
#define SBICF_SELECTED	0x04	/* bus is in selected state. */
#define SBICF_BADDMA	0x10	/* controller can only DMA to ztwobus space */
#define SBICF_BBUF	0x20	/* DMA input needs to be copied from bounce */
#define	SBICF_INTR	0x40	/* SBICF interrupt expected */
#define	SBICF_INDMA	0x80	/* not used yet, DMA I/O in progress */

/* sync states */
#define SYNC_START	0	/* no sync handshake started */
#define SYNC_SENT	1	/* we sent sync request, no answer yet */
#define SYNC_DONE	2	/* target accepted our (or inferior) settings,
				   or it rejected the request and we stay async */
#ifdef DEBUG
#define	DDB_FOLLOW	0x04
#define DDB_IO		0x08
#endif
extern int sbic_inhibit_sync;
extern int sbic_no_dma;
extern int sbic_clock_override;

#define	PHASE		0x07		/* mask for psns/pctl phase */
#define	DATA_OUT_PHASE	0x00
#define	DATA_IN_PHASE	0x01
#define	CMD_PHASE	0x02
#define	STATUS_PHASE	0x03
#define	BUS_FREE_PHASE	0x04
#define	ARB_SEL_PHASE	0x05	/* Fuji chip combines arbitration with sel. */
#define	MESG_OUT_PHASE	0x06
#define	MESG_IN_PHASE	0x07

#define	MSG_CMD_COMPLETE	0x00
#define MSG_EXT_MESSAGE		0x01
#define	MSG_SAVE_DATA_PTR	0x02
#define	MSG_RESTORE_PTR		0x03
#define	MSG_DISCONNECT		0x04
#define	MSG_INIT_DETECT_ERROR	0x05
#define	MSG_ABORT		0x06
#define	MSG_REJECT		0x07
#define	MSG_NOOP		0x08
#define	MSG_PARITY_ERROR	0x09
#define	MSG_BUS_DEVICE_RESET	0x0C
#define	MSG_IDENTIFY		0x80
#define	MSG_IDENTIFY_DR		0xc0	/* (disconnect/reconnect allowed) */
#define	MSG_SYNC_REQ 		0x01


#define	STS_CHECKCOND	0x02	/* Check Condition (ie., read sense) */
#define	STS_CONDMET	0x04	/* Condition Met (ie., search worked) */
#define	STS_BUSY	0x08
#define	STS_INTERMED	0x10	/* Intermediate status sent */
#define	STS_EXT		0x80	/* Extended status valid */

/*
 * XXXX
 */
struct scsi_fmt_cdb {
	int len;		/* cdb length (in bytes) */
	u_char cdb[28];		/* cdb to use on next read/write */
};

struct buf;
struct scsi_xfer;

void sbic_minphys __P((struct buf *bp));
u_int sbic_adinfo __P((void));
int sbic_scsicmd __P((struct scsi_xfer *));

#endif /* _SBICVAR_H_ */