Home | History | Annotate | Line # | Download | only in dev
sbicvar.h revision 1.7
      1 /*	$NetBSD: sbicvar.h,v 1.7 1995/08/12 20:30:48 mycroft Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 1990 The Regents of the University of California.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to Berkeley by
      8  * Van Jacobson of Lawrence Berkeley Laboratory.
      9  *
     10  * Redistribution and use in source and binary forms, with or without
     11  * modification, are permitted provided that the following conditions
     12  * are met:
     13  * 1. Redistributions of source code must retain the above copyright
     14  *    notice, this list of conditions and the following disclaimer.
     15  * 2. Redistributions in binary form must reproduce the above copyright
     16  *    notice, this list of conditions and the following disclaimer in the
     17  *    documentation and/or other materials provided with the distribution.
     18  * 3. All advertising materials mentioning features or use of this software
     19  *    must display the following acknowledgement:
     20  *	This product includes software developed by the University of
     21  *	California, Berkeley and its contributors.
     22  * 4. Neither the name of the University nor the names of its contributors
     23  *    may be used to endorse or promote products derived from this software
     24  *    without specific prior written permission.
     25  *
     26  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     27  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     28  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     29  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     30  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     31  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     32  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     33  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     34  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     35  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     36  * SUCH DAMAGE.
     37  *
     38  *	@(#)scsivar.h	7.1 (Berkeley) 5/8/90
     39  */
     40 #ifndef _SBICVAR_H_
     41 #define _SBICVAR_H_
     42 
     43 /*
     44  * The largest single request will be MAXPHYS bytes which will require
     45  * at most MAXPHYS/NBPG+1 chain elements to describe, i.e. if none of
     46  * the buffer pages are physically contiguous (MAXPHYS/NBPG) and the
     47  * buffer is not page aligned (+1).
     48  */
     49 #define	DMAMAXIO	(MAXPHYS/NBPG+1)
     50 
     51 struct	dma_chain {
     52 	int	dc_count;
     53 	char	*dc_addr;
     54 };
     55 
     56 struct	sbic_pending {
     57 	TAILQ_ENTRY(sbic_pending) link;
     58 	struct scsi_xfer *xs;
     59 };
     60 
     61 struct	sbic_softc {
     62 	struct	device sc_dev;
     63 	struct	isr sc_isr;
     64 	struct	target_sync {
     65 		u_char	state;
     66 		u_char	period;
     67 		u_char	offset;
     68 	} sc_sync[8];
     69 	struct	scsi_link sc_link;	/* proto for sub devices */
     70 	sbic_regmap_p	sc_sbicp;	/* the SBIC */
     71 	volatile void 	*sc_cregs;	/* driver specific regs */
     72 	TAILQ_HEAD(,sbic_pending) sc_xslist;	/* LIFO */
     73 	struct	sbic_pending sc_xsstore[8][8];	/* one for every unit */
     74 	struct	scsi_xfer *sc_xs;	/* transfer from high level code */
     75 	u_char	sc_flags;
     76 	u_char	sc_scsiaddr;
     77 	u_char	sc_stat[2];
     78 	u_char	sc_msg[7];
     79 	u_long	sc_clkfreq;
     80 	u_long	sc_tcnt;		/* number of bytes transfered */
     81 	u_char *sc_dmabuffer;
     82 	u_char *sc_dmausrbuf;
     83 	u_long  sc_dmausrlen;
     84 	u_short sc_dmacmd;		/* used by dma drivers */
     85 	u_short	sc_dmatimo;		/* dma timeout */
     86 	u_long	sc_dmamask;		/* dma valid mem mask */
     87 	struct	dma_chain sc_chain[DMAMAXIO];
     88 	struct	dma_chain *sc_cur;
     89 	struct	dma_chain *sc_last;
     90 	int  (*sc_dmago)	__P((struct sbic_softc *, char *, int, int));
     91 	int  (*sc_dmanext)	__P((struct sbic_softc *));
     92 	void (*sc_dmafree)	__P((struct sbic_softc *));
     93 	void (*sc_dmastop)	__P((struct sbic_softc *));
     94 	u_short	gtsc_bankmask;		/* GVP specific bank selected */
     95 };
     96 
     97 /* sc_flags */
     98 #define	SBICF_ALIVE	0x01	/* controller initialized */
     99 #define SBICF_DCFLUSH	0x02	/* need flush for overlap after dma finishes */
    100 #define SBICF_SELECTED	0x04	/* bus is in selected state. */
    101 #define SBICF_BADDMA	0x10	/* controller can only DMA to ztwobus space */
    102 #define SBICF_BBUF	0x20	/* DMA input needs to be copied from bounce */
    103 #define	SBICF_INTR	0x40	/* SBICF interrupt expected */
    104 #define	SBICF_INDMA	0x80	/* not used yet, DMA I/O in progress */
    105 
    106 /* sync states */
    107 #define SYNC_START	0	/* no sync handshake started */
    108 #define SYNC_SENT	1	/* we sent sync request, no answer yet */
    109 #define SYNC_DONE	2	/* target accepted our (or inferior) settings,
    110 				   or it rejected the request and we stay async */
    111 #ifdef DEBUG
    112 #define	DDB_FOLLOW	0x04
    113 #define DDB_IO		0x08
    114 #endif
    115 extern int sbic_inhibit_sync;
    116 extern int sbic_no_dma;
    117 extern int sbic_clock_override;
    118 
    119 #define	PHASE		0x07		/* mask for psns/pctl phase */
    120 #define	DATA_OUT_PHASE	0x00
    121 #define	DATA_IN_PHASE	0x01
    122 #define	CMD_PHASE	0x02
    123 #define	STATUS_PHASE	0x03
    124 #define	BUS_FREE_PHASE	0x04
    125 #define	ARB_SEL_PHASE	0x05	/* Fuji chip combines arbitration with sel. */
    126 #define	MESG_OUT_PHASE	0x06
    127 #define	MESG_IN_PHASE	0x07
    128 
    129 #define	MSG_CMD_COMPLETE	0x00
    130 #define MSG_EXT_MESSAGE		0x01
    131 #define	MSG_SAVE_DATA_PTR	0x02
    132 #define	MSG_RESTORE_PTR		0x03
    133 #define	MSG_DISCONNECT		0x04
    134 #define	MSG_INIT_DETECT_ERROR	0x05
    135 #define	MSG_ABORT		0x06
    136 #define	MSG_REJECT		0x07
    137 #define	MSG_NOOP		0x08
    138 #define	MSG_PARITY_ERROR	0x09
    139 #define	MSG_BUS_DEVICE_RESET	0x0C
    140 #define	MSG_IDENTIFY		0x80
    141 #define	MSG_IDENTIFY_DR		0xc0	/* (disconnect/reconnect allowed) */
    142 #define	MSG_SYNC_REQ 		0x01
    143 
    144 
    145 #define	STS_CHECKCOND	0x02	/* Check Condition (ie., read sense) */
    146 #define	STS_CONDMET	0x04	/* Condition Met (ie., search worked) */
    147 #define	STS_BUSY	0x08
    148 #define	STS_INTERMED	0x10	/* Intermediate status sent */
    149 #define	STS_EXT		0x80	/* Extended status valid */
    150 
    151 /*
    152  * XXXX
    153  */
    154 struct scsi_fmt_cdb {
    155 	int len;		/* cdb length (in bytes) */
    156 	u_char cdb[28];		/* cdb to use on next read/write */
    157 };
    158 
    159 struct buf;
    160 struct scsi_xfer;
    161 
    162 void sbic_minphys __P((struct buf *bp));
    163 int sbic_scsicmd __P((struct scsi_xfer *));
    164 
    165 #endif /* _SBICVAR_H_ */
    166