siop_script.ss revision 1.4.148.1
1 ; $NetBSD: siop_script.ss,v 1.4.148.1 2010/03/11 15:02:01 yamt Exp $ 2 3 ; 4 ; Copyright (c) 1995 Michael L. Hitch 5 ; All rights reserved. 6 ; 7 ; Redistribution and use in source and binary forms, with or without 8 ; modification, are permitted provided that the following conditions 9 ; are met: 10 ; 1. Redistributions of source code must retain the above copyright 11 ; notice, this list of conditions and the following disclaimer. 12 ; 2. Redistributions in binary form must reproduce the above copyright 13 ; notice, this list of conditions and the following disclaimer in the 14 ; documentation and/or other materials provided with the distribution. 15 ; 16 ; THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 ; IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 ; OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 ; IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 ; INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 ; NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 ; DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 ; THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 ; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 ; THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 ; 27 28 ; NCR 53c710 script 29 ; 30 ARCH 710 31 ; 32 ABSOLUTE ds_Device = 0 33 ABSOLUTE ds_MsgOut = ds_Device + 4 34 ABSOLUTE ds_Cmd = ds_MsgOut + 8 35 ABSOLUTE ds_Status = ds_Cmd + 8 36 ABSOLUTE ds_Msg = ds_Status + 8 37 ABSOLUTE ds_MsgIn = ds_Msg + 8 38 ABSOLUTE ds_ExtMsg = ds_MsgIn + 8 39 ABSOLUTE ds_SyncMsg = ds_ExtMsg + 8 40 ABSOLUTE ds_Data1 = ds_SyncMsg + 8 41 ABSOLUTE ds_Data2 = ds_Data1 + 8 42 ABSOLUTE ds_Data3 = ds_Data2 + 8 43 ABSOLUTE ds_Data4 = ds_Data3 + 8 44 ABSOLUTE ds_Data5 = ds_Data4 + 8 45 ABSOLUTE ds_Data6 = ds_Data5 + 8 46 ABSOLUTE ds_Data7 = ds_Data6 + 8 47 ABSOLUTE ds_Data8 = ds_Data7 + 8 48 ABSOLUTE ds_Data9 = ds_Data8 + 8 49 50 ABSOLUTE ok = 0xff00 51 ABSOLUTE err1 = 0xff01 52 ABSOLUTE err2 = 0xff02 53 ABSOLUTE err3 = 0xff03 54 ABSOLUTE err4 = 0xff04 55 ABSOLUTE err5 = 0xff05 56 ABSOLUTE err6 = 0xff06 57 ABSOLUTE err7 = 0xff07 58 ABSOLUTE err8 = 0xff08 59 ABSOLUTE err9 = 0xff09 60 ABSOLUTE err10 = 0xff0a 61 ABSOLUTE err11 = 0xff0b 62 63 ENTRY scripts 64 ENTRY switch 65 ENTRY wait_reselect 66 ENTRY dataout 67 ENTRY datain 68 ENTRY clear_ack 69 70 PROC scripts: 71 72 scripts: 73 74 SELECT ATN FROM ds_Device, REL(reselect) 75 ; 76 switch: 77 JUMP REL(msgin), WHEN MSG_IN 78 JUMP REL(msgout), IF MSG_OUT 79 JUMP REL(command_phase), IF CMD 80 JUMP REL(dataout), IF DATA_OUT 81 JUMP REL(datain), IF DATA_IN 82 JUMP REL(end), IF STATUS 83 84 INT err5 ; Unrecognized phase 85 86 msgin: 87 MOVE FROM ds_MsgIn, WHEN MSG_IN 88 JUMP REL(ext_msg), IF 0x01 ; extended message 89 JUMP REL(disc), IF 0x04 ; disconnect message 90 JUMP REL(msg_sdp), IF 0x02 ; save data pointers 91 JUMP REL(msg_rej), IF 0x07 ; message reject 92 JUMP REL(msg_rdp), IF 0x03 ; restore data pointers 93 INT err6 ; unrecognized message 94 95 msg_rej: 96 ; Do we need to interrupt host here to let it handle the reject? 97 msg_rdp: 98 clear_ack: 99 CLEAR ACK 100 CLEAR ATN 101 JUMP REL(switch) 102 103 ext_msg: 104 CLEAR ACK 105 MOVE FROM ds_ExtMsg, WHEN MSG_IN 106 JUMP REL(sync_msg), IF 0x03 107 int err7 ; extended message not SDTR 108 109 sync_msg: 110 CLEAR ACK 111 MOVE FROM ds_SyncMsg, WHEN MSG_IN 112 int err11 ; Let host handle the message 113 ; If we continue from the interrupt, the host has set up a response 114 ; message to be sent. Set ATN, clear ACK, and continue. 115 SET ATN 116 CLEAR ACK 117 JUMP REL(switch) 118 119 disc: 120 CLEAR ACK 121 WAIT DISCONNECT 122 123 int err2 ; signal disconnect w/o save DP 124 125 msg_sdp: 126 CLEAR ACK ; acknowledge message 127 JUMP REL(switch), WHEN NOT MSG_IN 128 MOVE FROM ds_ExtMsg, WHEN MSG_IN 129 INT err8, IF NOT 0x04 ; interrupt if not disconnect 130 CLEAR ACK 131 WAIT DISCONNECT 132 133 INT err1 ; signal disconnect 134 135 reselect: 136 wait_reselect: 137 WAIT RESELECT REL(select_adr) 138 MOVE LCRC to SFBR ; Save reselect ID 139 MOVE SFBR to SCRATCH0 140 141 INT err9, WHEN NOT MSG_IN ; didn't get IDENTIFY 142 MOVE FROM ds_Msg, WHEN MSG_IN 143 INT err3 ; let host know about reconnect 144 CLEAR ACK ; acknowlege the message 145 JUMP REL(switch) 146 147 148 select_adr: 149 MOVE SCNTL1 & 0x10 to SFBR ; get connected status 150 INT err4, IF 0x00 ; tell host if not connected 151 MOVE CTEST2 & 0x40 to SFBR ; clear Sig_P 152 JUMP REL(wait_reselect) ; and try reselect again 153 154 msgout: 155 MOVE FROM ds_MsgOut, WHEN MSG_OUT 156 JUMP REL(switch) 157 158 command_phase: 159 CLEAR ATN 160 MOVE FROM ds_Cmd, WHEN CMD 161 JUMP REL(switch) 162 163 dataout: 164 MOVE FROM ds_Data1, WHEN DATA_OUT 165 CALL REL(switch), WHEN NOT DATA_OUT 166 MOVE FROM ds_Data2, WHEN DATA_OUT 167 CALL REL(switch), WHEN NOT DATA_OUT 168 MOVE FROM ds_Data3, WHEN DATA_OUT 169 CALL REL(switch), WHEN NOT DATA_OUT 170 MOVE FROM ds_Data4, WHEN DATA_OUT 171 CALL REL(switch), WHEN NOT DATA_OUT 172 MOVE FROM ds_Data5, WHEN DATA_OUT 173 CALL REL(switch), WHEN NOT DATA_OUT 174 MOVE FROM ds_Data6, WHEN DATA_OUT 175 CALL REL(switch), WHEN NOT DATA_OUT 176 MOVE FROM ds_Data7, WHEN DATA_OUT 177 CALL REL(switch), WHEN NOT DATA_OUT 178 MOVE FROM ds_Data8, WHEN DATA_OUT 179 CALL REL(switch), WHEN NOT DATA_OUT 180 MOVE FROM ds_Data9, WHEN DATA_OUT 181 CALL REL(switch) 182 183 datain: 184 MOVE FROM ds_Data1, WHEN DATA_IN 185 CALL REL(switch), WHEN NOT DATA_IN 186 MOVE FROM ds_Data2, WHEN DATA_IN 187 CALL REL(switch), WHEN NOT DATA_IN 188 MOVE FROM ds_Data3, WHEN DATA_IN 189 CALL REL(switch), WHEN NOT DATA_IN 190 MOVE FROM ds_Data4, WHEN DATA_IN 191 CALL REL(switch), WHEN NOT DATA_IN 192 MOVE FROM ds_Data5, WHEN DATA_IN 193 CALL REL(switch), WHEN NOT DATA_IN 194 MOVE FROM ds_Data6, WHEN DATA_IN 195 CALL REL(switch), WHEN NOT DATA_IN 196 MOVE FROM ds_Data7, WHEN DATA_IN 197 CALL REL(switch), WHEN NOT DATA_IN 198 MOVE FROM ds_Data8, WHEN DATA_IN 199 CALL REL(switch), WHEN NOT DATA_IN 200 MOVE FROM ds_Data9, WHEN DATA_IN 201 CALL REL(switch) 202 203 end: 204 MOVE FROM ds_Status, WHEN STATUS 205 int err10, WHEN NOT MSG_IN ; status not followed by msg 206 MOVE FROM ds_Msg, WHEN MSG_IN 207 CLEAR ACK 208 WAIT DISCONNECT 209 INT ok ; signal completion 210 JUMP REL(wait_reselect) 211
Indexes created Fri Oct 03 02:09:57 GMT 2025