startit.s revision 1.3 1 1.3 chopps /* $NetBSD: startit.s,v 1.3 1998/05/08 19:08:18 chopps Exp $ */
2 1.1 is
3 1.1 is /*
4 1.1 is * Copyright (c) 1996 Ignatios Souvatzis
5 1.1 is * Copyright (c) 1994 Michael L. Hitch
6 1.1 is * All rights reserved.
7 1.1 is *
8 1.1 is * Redistribution and use in source and binary forms, with or without
9 1.1 is * modification, are permitted provided that the following conditions
10 1.1 is * are met:
11 1.1 is * 1. Redistributions of source code must retain the above copyright
12 1.1 is * notice, this list of conditions and the following disclaimer.
13 1.1 is * 2. Redistributions in binary form must reproduce the above copyright
14 1.1 is * notice, this list of conditions and the following disclaimer in the
15 1.1 is * documentation and/or other materials provided with the distribution.
16 1.1 is * 3. All advertising materials mentioning features or use of this software
17 1.1 is * must display the following acknowledgement:
18 1.1 is * This product includes software developed by Michael L. Hitch.
19 1.1 is * 4. The name of the author may not be used to endorse or promote products
20 1.1 is * derived from this software without specific prior written permission
21 1.1 is *
22 1.1 is * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
23 1.1 is * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
24 1.1 is * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
25 1.1 is * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
26 1.1 is * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 1.1 is * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 1.1 is * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 1.1 is * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 1.1 is * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 1.1 is * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 1.1 is *
33 1.1 is *
34 1.3 chopps * From: $NetBSD: startit.s,v 1.3 1998/05/08 19:08:18 chopps Exp $
35 1.1 is */
36 1.1 is
37 1.1 is .set ABSEXECBASE,4
38 1.1 is
39 1.1 is .text
40 1.1 is
41 1.1 is .globl _startit
42 1.1 is .globl _startit_end
43 1.1 is
44 1.1 is _startit:
45 1.1 is #if TESTONAMIGA
46 1.1 is movew #0x999,0xdff180 | gray
47 1.1 is #endif
48 1.1 is movel sp,a3
49 1.1 is movel 4:w,a6
50 1.1 is lea pc@(start_super:w),a5
51 1.1 is jmp a6@(-0x1e) | supervisor-call
52 1.1 is
53 1.1 is start_super:
54 1.1 is #if TESTONAMIGA
55 1.1 is movew #0x900,0xdff180 | dark red
56 1.1 is #endif
57 1.1 is movew #0x2700,sr
58 1.1 is
59 1.1 is | the BSD kernel wants values into the following registers:
60 1.1 is | a0: fastmem-start
61 1.1 is | d0: fastmem-size
62 1.1 is | d1: chipmem-size
63 1.1 is | d3: Amiga specific flags
64 1.1 is | d4: E clock frequency
65 1.1 is | d5: AttnFlags (cpuid)
66 1.2 mhitch | d6: boot partition offset
67 1.1 is | d7: boothowto
68 1.1 is | a4: esym location
69 1.1 is | a2: Inhibit sync flags
70 1.1 is | All other registers zeroed for possible future requirements.
71 1.1 is
72 1.1 is lea pc@(_startit:w),sp | make sure we have a good stack ***
73 1.1 is
74 1.1 is movel a3@(4),a1 | loaded kernel
75 1.1 is movel a3@(8),d2 | length of loaded kernel
76 1.1 is | movel a3@(12),sp | entry point in stack pointer
77 1.1 is movel a3@(12),a6 | entry point ***
78 1.1 is movel a3@(16),a0 | fastmem-start
79 1.1 is movel a3@(20),d0 | fastmem-size
80 1.1 is movel a3@(24),d1 | chipmem-size
81 1.1 is movel a3@(28),d7 | boothowto
82 1.1 is movel a3@(32),a4 | esym
83 1.1 is movel a3@(36),d5 | cpuid
84 1.1 is movel a3@(40),d4 | E clock frequency
85 1.1 is movel a3@(44),d3 | Amiga flags
86 1.1 is movel a3@(48),a2 | Inhibit sync flags
87 1.2 mhitch movel a3@(52),d6 | boot partition offset
88 1.1 is
89 1.1 is cmpb #0x7D,a3@(36) | is it DraCo?
90 1.2 mhitch movel a3@(56),a3 | Load to fastmem flag
91 1.2 mhitch jeq nott | yes, switch off MMU later
92 1.1 is
93 1.1 is | no, it is an Amiga:
94 1.1 is
95 1.1 is #if TESTONAMIGA
96 1.1 is movew #0xf00,0xdff180 |red
97 1.1 is #endif
98 1.1 is | moveb #0,0x200003c8
99 1.1 is | moveb #63,0x200003c9
100 1.1 is | moveb #0,0x200003c9
101 1.1 is | moveb #0,0x200003c9
102 1.1 is
103 1.1 is movew #(1<<9),0xdff096 | disable DMA on Amigas.
104 1.1 is
105 1.1 is | ------ mmu off start -----
106 1.1 is
107 1.1 is btst #3,d5 | AFB_68040,SysBase->AttnFlags
108 1.2 mhitch jeq not040
109 1.1 is
110 1.1 is | Turn off 68040/060 MMU
111 1.1 is
112 1.2 mhitch subl a5,a5
113 1.2 mhitch .word 0x4e7b,0xd003 | movec a5,tc
114 1.2 mhitch .word 0x4e7b,0xd806 | movec a5,urp
115 1.2 mhitch .word 0x4e7b,0xd807 | movec a5,srp
116 1.2 mhitch .word 0x4e7b,0xd004 | movec a5,itt0
117 1.2 mhitch .word 0x4e7b,0xd005 | movec a5,itt1
118 1.2 mhitch .word 0x4e7b,0xd006 | movec a5,dtt0
119 1.2 mhitch .word 0x4e7b,0xd007 | movec a5,dtt1
120 1.2 mhitch jra nott
121 1.1 is
122 1.1 is not040:
123 1.2 mhitch lea pc@(zero:w),a5
124 1.2 mhitch pmove a5@,tc | Turn off MMU
125 1.2 mhitch lea pc@(nullrp:w),a5
126 1.2 mhitch pmove a5@,crp | Turn off MMU some more
127 1.2 mhitch pmove a5@,srp | Really, really, turn off MMU
128 1.1 is
129 1.1 is | Turn off 68030 TT registers
130 1.1 is
131 1.1 is btst #2,d5 | AFB_68030,SysBase->AttnFlags
132 1.2 mhitch jeq nott | Skip TT registers if not 68030
133 1.2 mhitch lea pc@(zero:w),a5
134 1.2 mhitch .word 0xf015,0x0800 | pmove a5@,tt0 (gas only knows about 68851 ops..)
135 1.2 mhitch .word 0xf015,0x0c00 | pmove a5@,tt1 (gas only knows about 68851 ops..)
136 1.1 is
137 1.1 is nott:
138 1.1 is | ---- mmu off end ----
139 1.1 is #if TESTONAMIGA
140 1.1 is movew #0xf60,0xdff180 | orange
141 1.1 is #endif
142 1.1 is | moveb #0,0x200003c8
143 1.1 is | moveb #63,0x200003c9
144 1.1 is | moveb #24,0x200003c9
145 1.1 is | moveb #0,0x200003c9
146 1.1 is
147 1.3 chopps | ---- switch off cache ----
148 1.3 chopps btst #3,d5
149 1.3 chopps jeq L3
150 1.3 chopps .word 0xf4f8
151 1.3 chopps L3: movl d2,sp@- | save d2
152 1.3 chopps movql #0,d2 | switch off cache to ensure we use
153 1.3 chopps movec d2,cacr | valid kernel data
154 1.3 chopps movl sp@+,d2 | restore d2
155 1.3 chopps
156 1.1 is | ---- copy kernel start ----
157 1.1 is
158 1.3 chopps | removed Z flag
159 1.3 chopps | tstl a3 | Can we load to fastmem?
160 1.3 chopps | jeq L0 | No, leave destination at 0
161 1.2 mhitch movl a0,a3 | Move to start of fastmem chunk
162 1.1 is addl a0,a6 | relocate kernel entry point
163 1.3 chopps
164 1.3 chopps addl #3,d2
165 1.3 chopps andl #0xfffffffc,d2 | round up.
166 1.3 chopps
167 1.3 chopps | determine if the kernel need be copied upwards or downwards
168 1.3 chopps
169 1.3 chopps cmpl a1,a3 | a3-a1
170 1.3 chopps bcs above | source is above
171 1.3 chopps
172 1.3 chopps movl a0,sp
173 1.3 chopps addl d0,sp | move the stack to the end of segment
174 1.3 chopps
175 1.3 chopps | copy from below upwards requires copying from end to start.
176 1.3 chopps
177 1.3 chopps addl d2,a3 | one long word past
178 1.3 chopps addl d2,a1 | one long word past
179 1.3 chopps
180 1.3 chopps subl #4,sp | alloc space
181 1.3 chopps movl a1,sp@- | save source
182 1.3 chopps movl a3,sp@- | save destination
183 1.3 chopps
184 1.3 chopps | copy copier to end of segment
185 1.3 chopps
186 1.3 chopps movl sp,a3
187 1.3 chopps subl #256,a3 | end of segment save our stack
188 1.3 chopps
189 1.3 chopps lea pc@(_startit_end:w),a1
190 1.3 chopps movl a0,sp@- | save segment start
191 1.3 chopps lea pc@(below:w),a0
192 1.3 chopps
193 1.3 chopps L0: movw a1@-,a3@-
194 1.3 chopps cmpl a0,a1
195 1.3 chopps bne L0
196 1.3 chopps movl sp@,a0 | restore segment start
197 1.3 chopps movl a3,sp@ | address of relocated below
198 1.3 chopps addl #(ckend - below),a3
199 1.3 chopps movl a3,sp@(12) | address of ckend for later
200 1.3 chopps rts
201 1.3 chopps
202 1.3 chopps below: movl sp@+,a3 | recover destination
203 1.3 chopps movl sp@+,a1 | recover source
204 1.3 chopps
205 1.3 chopps L1: movl a1@-,a3@- | copy kernel
206 1.3 chopps subl #4,d2
207 1.3 chopps bne L1
208 1.3 chopps
209 1.3 chopps rts | jmps to relocated ckend
210 1.3 chopps
211 1.3 chopps above: movl a1@+,a3@+
212 1.1 is subl #4,d2
213 1.3 chopps bne above
214 1.1 is
215 1.1 is lea pc@(ckend:w),a1
216 1.2 mhitch movl a3,sp@-
217 1.1 is pea pc@(_startit_end:w)
218 1.3 chopps L2:
219 1.2 mhitch movl a1@+,a3@+
220 1.1 is cmpl sp@,a1
221 1.3 chopps bcs L2
222 1.1 is addql #4,sp
223 1.1 is
224 1.1 is #if TESTONAMIGA
225 1.1 is movew #0xFF0,0xdff180 | yellow
226 1.1 is #endif
227 1.1 is | moveb #0,0x200003c8
228 1.1 is | moveb #63,0x200003c9
229 1.1 is | moveb #0,0x200003c9
230 1.1 is | moveb #0,0x200003c9
231 1.1 is
232 1.1 is rts
233 1.1 is
234 1.1 is | ---- copy kernel end ----
235 1.1 is
236 1.1 is ckend:
237 1.1 is #if TESTONAMIGA
238 1.1 is movew #0x0ff,0xdff180 | petrol
239 1.1 is #endif
240 1.1 is | moveb #0,0x200003c8
241 1.1 is | moveb #0,0x200003c9
242 1.1 is | moveb #63,0x200003c9
243 1.1 is | moveb #63,0x200003c9
244 1.1 is
245 1.1 is movl d5,d2
246 1.1 is roll #8,d2
247 1.1 is cmpb #0x7D,d2
248 1.1 is jne noDraCo
249 1.1 is
250 1.1 is | DraCo: switch off MMU now:
251 1.1 is
252 1.2 mhitch subl a5,a5
253 1.2 mhitch .word 0x4e7b,0xd003 | movec a5,tc
254 1.2 mhitch .word 0x4e7b,0xd806 | movec a5,urp
255 1.2 mhitch .word 0x4e7b,0xd807 | movec a5,srp
256 1.2 mhitch .word 0x4e7b,0xd004 | movec a5,itt0
257 1.2 mhitch .word 0x4e7b,0xd005 | movec a5,itt1
258 1.2 mhitch .word 0x4e7b,0xd006 | movec a5,dtt0
259 1.2 mhitch .word 0x4e7b,0xd007 | movec a5,dtt1
260 1.1 is
261 1.1 is noDraCo:
262 1.1 is moveq #0,d2 | zero out unused registers
263 1.2 mhitch movel d2,a1 | (might make future compatibility
264 1.2 mhitch movel d2,a3 | would have known contents)
265 1.2 mhitch movel d2,a5
266 1.1 is movel a6,sp | entry point into stack pointer
267 1.2 mhitch movel d2,a6
268 1.1 is
269 1.1 is #if TESTONAMIGA
270 1.1 is movew #0x0F0,0xdff180 | green
271 1.1 is #endif
272 1.1 is | moveb #0,0x200003c8
273 1.1 is | moveb #0,0x200003c9
274 1.1 is | moveb #63,0x200003c9
275 1.1 is | moveb #0,0x200003c9
276 1.1 is
277 1.1 is jmp sp@ | jump to kernel entry point
278 1.1 is
279 1.1 is
280 1.1 is | A do-nothing MMU root pointer (includes the following long as well)
281 1.1 is
282 1.1 is nullrp: .long 0x7fff0001
283 1.1 is zero: .long 0
284 1.1 is
285 1.1 is _startit_end:
286