Home | History | Annotate | Line # | Download | only in conf
GENERIC revision 1.22
      1 # $NetBSD: GENERIC,v 1.22 2014/08/23 20:26:56 dholland Exp $
      2 #
      3 # GENERIC machine description file
      4 # 
      5 # This machine description file is used to generate the default NetBSD
      6 # kernel.  The generic kernel does not include all options, subsystems
      7 # and device drivers, but should be useful for most applications.
      8 #
      9 # The machine description file can be customised for your specific
     10 # machine to reduce the kernel size and improve its performance.
     11 #
     12 # For further information on compiling NetBSD kernels, see the config(8)
     13 # man page.
     14 #
     15 # For further information on hardware support for this architecture, see
     16 # the intro(4) man page.  For further information about kernel options
     17 # for this architecture, see the options(4) man page.  For an explanation
     18 # of each device driver in this file see the section 4 man page for the
     19 # device.
     20 
     21 include "arch/amigappc/conf/std.amigappc"
     22 
     23 options 	INCLUDE_CONFIG_FILE     # embed config file in kernel binary
     24 
     25 #ident          "GENERIC-$Revision: 1.22 $"
     26 
     27 maxusers	8
     28 
     29 #
     30 # Mainboards to support (in addition to Amiga)
     31 #
     32 options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
     33 				# MC68060 with an OS ROM up to (at least)
     34 				# V40 (OS3.1) and want to boot with the
     35 				# bootblock.
     36 				# You do not need this if you have a DraCo,
     37 				# have no 68060 or NEVER use the bootblock
     38 options 	P5PPC68KBOARD	# Phase5 PPC/68K board support
     39 
     40 #
     41 # Standard system options
     42 #
     43 options 	INSECURE	# disable kernel security levels
     44 options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
     45 options 	NTP		# NTP phase/frequency locked loop
     46 
     47 options 	KTRACE		# system call tracing support
     48 options 	SCSIVERBOSE	# human readable SCSI error messages
     49 options 	USERCONF	# userconf(4) support
     50 #options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
     51 #options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
     52 
     53 # Support for System V IPC facilities.
     54 options 	SYSVSHM		# System V-like shared memory
     55 options 	SYSVMSG		# System V-like messages
     56 options 	SYSVSEM		# System V-like semaphores
     57 
     58 # Enable experimental buffer queue strategy for better responsiveness under 
     59 # high disk I/O load. Use it with caution - it's not proven to be stable yet.
     60 #options 	BUFQ_READPRIO
     61 #options 	BUFQ_PRIOCSCAN
     62 
     63 #
     64 # Diagnostic/debugging support options
     65 #
     66 #options 	DIAGNOSTIC	# Extra kernel sanity checks
     67 #options 	DEBUG		# Enable misc. kernel debugging code
     68 #options 	DEBUG_KERNEL_START
     69 #options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
     70 options 	DDB		# in-kernel debugger
     71 #options 	DDB_ONPANIC=1	# see also sysctl(7): `ddb.onpanic'
     72 options 	DDB_HISTORY_SIZE=512	# Enable history editing in DDB
     73 #options 	SCSIDEBUG	# Add SCSI debugging statements
     74 #options 	SERCONSOLE	# console via Amiga serial port
     75 #makeoptions	DEBUG="-g"	# compile full symbol table
     76 
     77 #
     78 # Compatibility option
     79 #
     80 options 	COMPAT_09	# NetBSD 0.9,
     81 options 	COMPAT_10	# NetBSD 1.0,
     82 options 	COMPAT_11	# NetBSD 1.1,
     83 options 	COMPAT_12	# NetBSD 1.2,
     84 options 	COMPAT_13	# NetBSD 1.3,
     85 options 	COMPAT_14	# NetBSD 1.4,
     86 options 	COMPAT_15	# NetBSD 1.5,
     87 options 	COMPAT_16	# NetBSD 1.6,
     88 options 	COMPAT_20	# NetBSD 2.0,
     89 options 	COMPAT_30	# NetBSD 3.0,
     90 options 	COMPAT_40	# NetBSD 4.0,
     91 options 	COMPAT_50	# NetBSD 5.0,
     92 options 	COMPAT_60	# NetBSD 6.0, and
     93 options 	COMPAT_70	# NetBSD 7.0 binary compatibility.
     94 options 	COMPAT_43	# and 4.3BSD
     95 #options 	COMPAT_386BSD_MBRPART # recognize old partition ID
     96 #options 	COMPAT_LINUX	# Linux binary compatibility
     97 #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
     98 options 	COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
     99 
    100 #
    101 # File systems
    102 #
    103 file-system 	FFS		# UFS
    104 file-system 	EXT2FS		# second extended file system (linux)
    105 file-system 	LFS		# log-structured file system
    106 file-system 	MFS		# memory file system
    107 file-system 	NFS		# Network file System client
    108 file-system 	CD9660		# ISO 9660 + Rock Ridge file system
    109 file-system 	MSDOSFS		# MS-DOS file system
    110 file-system 	ADOSFS		# AmigaDOS file system
    111 file-system 	FDESC		# /dev/fd
    112 file-system 	KERNFS		# /kern
    113 file-system 	NULLFS		# loopback file system
    114 file-system 	OVERLAY		# overlay file system
    115 file-system 	PROCFS		# /proc
    116 file-system 	UMAPFS		# NULLFS + uid and gid remapping
    117 file-system 	UNION		# union file system
    118 file-system	SMBFS		# experimental - CIFS; also needs nsmb (below)
    119 file-system	PTYFS		# /dev/pts/N support
    120 file-system	TMPFS		# Efficient memory file-system
    121 #file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
    122 
    123 # File system options
    124 #options 	FFS_EI		# FFS Endian Independent support
    125 options 	WAPBL		# File system journaling support
    126 
    127 options 	QUOTA		# legacy UFS quotas
    128 options 	QUOTA2		# new, in-filesystem UFS quotas
    129 #options	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
    130 options 	NFSSERVER	# Network File System server side code
    131 #options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
    132 #options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
    133 				# immutable) behave as system flags.
    134 
    135 #
    136 # Networking options
    137 #
    138 #options 	GATEWAY		# Packet forwarding
    139 options 	INET		# IP networking support (Required)
    140 options 	INET6		# IPV6
    141 #options 	IPSEC		# IP security
    142 #options 	IPSEC_DEBUG	# debug for IP security
    143 #options 	MROUTING	# Multicast routing
    144 #options 	DIRECTED_BROADCAST	# Broadcast across subnets
    145 #options 	PIM		# Protocol Independent Multicast
    146 #options 	NETATALK	# AppleTalk networking protocols
    147 options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
    148 options 	PPP_DEFLATE	# Deflate compression support for PPP
    149 options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
    150 options 	IPFILTER_LOG	# ipmon(8) log support
    151 options 	IPFILTER_LOOKUP	# ippool(8) support
    152 options 	IPFILTER_COMPAT # Compat for IP-Filter
    153 #options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
    154 #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
    155 
    156 #options 	ALTQ		# Manipulate network interfaces' output queues
    157 #options 	ALTQ_BLUE	# Stochastic Fair Blue
    158 #options 	ALTQ_CBQ	# Class-Based Queueing
    159 #options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
    160 #options 	ALTQ_FIFOQ	# First-In First-Out Queue
    161 #options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
    162 #options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
    163 #options 	ALTQ_LOCALQ	# Local queueing discipline
    164 #options 	ALTQ_PRIQ	# Priority Queueing
    165 #options 	ALTQ_RED	# Random Early Detection
    166 #options 	ALTQ_RIO	# RED with IN/OUT
    167 #options 	ALTQ_WFQ	# Weighted Fair Queueing
    168 
    169 #
    170 # Amiga specific options
    171 #
    172 options 	RETINACONSOLE	# enable code to allow retina to be console
    173 options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
    174 options 	CL5426CONSOLE	# Cirrus console
    175 options 	CV64CONSOLE	# CyberVision console
    176 options 	TSENGCONSOLE	# Tseng console
    177 options 	CV3DCONSOLE	# CyberVision 64/3D console
    178 
    179 options 	GRF_ECS		# Enhanced Chip Set
    180 options 	GRF_NTSC	# NTSC
    181 options 	GRF_PAL		# PAL
    182 options 	GRF_A2024	# Support for the A2024
    183 options 	GRF_AGA		# AGA Chip Set
    184 options 	GRF_AGA_VGA	# AGA VGAONLY timing
    185 options 	GRF_SUPER72	# AGA Super-72
    186 #options 	KFONT_8X11	# 8x11 font
    187 
    188 # select a font for the console according to the character set and keymap
    189 # you want to use
    190 options        KFONT_CONS_ISO8859_1
    191 #options         KFONT_CONS_ISO8859_2
    192 
    193 # This is how you would tell the kernel the A2410 oscillator frequencies:
    194 # The used frequencies are the defaults, and do not need option setting
    195 #options 	ULOWELL_OSC1=36000000
    196 #options 	ULOWELL_OSC2=66667000
    197 
    198 # This is how you specify the blitting speed, higher values may speed up blits
    199 # a littel bit.  If you raise this value too much some trash may appear.
    200 # the commented version is the default.
    201 #options 	RH_MEMCLK=61000000
    202 # this option enables the 64 bit sprite which does not work
    203 # for quite a few people.  E.g. The cursor sprite will turn to a block
    204 # when moved to the top of the screen in X.
    205 #options 	RH_64BIT_SPRITE
    206 # enables fast scroll code appears to now work on 040 systems.
    207 #options 	RETINA_SPEED_HACK
    208 # enables the Hardwarecursor which does not work on some systems.
    209 #options 	RH_HARDWARECURSOR
    210 
    211 #
    212 # Device configuration
    213 #
    214 mainbus0	at root
    215 cpu0		at mainbus0
    216 kbd0		at mainbus0		# Amiga keyboard
    217 zbus0		at mainbus0		# ZorroII/III expansion bus
    218 ser0		at mainbus0		# Amiga onboard serial
    219 par0		at mainbus0		# Amiga onboard parallel
    220 ms*		at mainbus0		# Amiga mice
    221 fdc0		at mainbus0		# Amiga FDC
    222 fd*		at fdc0 unit ?		# floppy disks on the later
    223 a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
    224 aucc*		at mainbus0		# Amiga CC audio
    225 audio*		at aucc?
    226 
    227 # wscons aware interface to amiga custom chips.
    228 # If you enable it enable also wskbd.
    229 #amidisplaycc0	at mainbus0		# wscons interface to custom chips
    230 #wsdisplay0	at amidisplaycc0 console ?
    231 #options 	WSEMUL_VT100
    232 #options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling
    233 #options 	FONT_VT220L8x10
    234 #options	FONT_VT220ISO8x16
    235 #
    236 # Keyboard device. Optionally can attach a wskbd.
    237 # wskbd works together with a wsdisplay so enable them both if you will.
    238 # Don't enable wskbd if you use ite.
    239 #
    240 # XXX in std.amiga: kbd0 at mainbus0
    241 #wskbd0		at kbd0 console ?
    242 #wsmouse*	at ms?
    243 
    244 #
    245 # Graphics devices
    246 #
    247 grfcc0		at mainbus0		# custom chips
    248 grfrt0		at zbus0		# retina II
    249 grfrh0		at zbus0		# retina III
    250 grfcl*		at zbus0		# Picasso II/Piccolo/Spectrum
    251 grful0		at zbus0		# A2410
    252 grfcv0		at zbus0		# CyberVision 64
    253 grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
    254 grfcv3d0	at zbus0		# CyberVision 64/3D
    255 
    256 grf0		at grfcc0
    257 grf1		at grfrt0
    258 grf2		at grfrh0
    259 grf3		at grfcl?
    260 grf4		at grful0
    261 grf5		at grfcv0
    262 grf6		at grfet?
    263 grf7		at grfcv3d0
    264 ite0		at grf0			# terminal emulators for grfs
    265 ite1		at grf1			# terminal emulators for grfs
    266 ite2		at grf2			# terminal emulators for grfs
    267 ite3		at grf3			# terminal emulators for grfs
    268 ite4		at grf4			# terminal emulators for grfs
    269 ite5		at grf5			# terminal emulators for grfs
    270 ite6		at grf6			# terminal emulators for grfs
    271 ite7		at grf7			# terminal emulators for grfs
    272 
    273 #
    274 # Zorro-II, Zorro-III devices (sans graphics)
    275 #
    276 repulse*	at zbus0		# ALiENDESiGN Repulse
    277 audio*		at repulse?
    278 
    279 toccata*	at zbus0		# MacroSystem GmbH Toccata
    280 audio*		at toccata?
    281 
    282 # Ethernet cards:
    283 le*		at zbus0		# A2065, Ameristar, Ariadne
    284 ne*		at zbus0		# AriadneII, X-surf
    285 ed*		at zbus0		# Hydra, ASDG LanRover
    286 es*		at zbus0		# CEI A4066 EthernetPLUS
    287 qn*		at zbus0		# Quicknet
    288 
    289 # Arcnet
    290 bah*		at zbus0		# C=/Ameristar A2060 / 560
    291 
    292 # Greater Valley Product Bus
    293 gvpbus* 	at zbus0
    294 
    295 # scsi stuff, all possible
    296 gtsc0		at gvpbus?		# GVP series II scsi
    297 scsibus*	at gtsc0
    298 ahsc0		at mainbus0		# A3000 scsi
    299 scsibus*	at ahsc0
    300 atzsc0		at zbus0		# A2091 scsi
    301 scsibus*	at atzsc0
    302 wstsc0		at zbus0		# Wordsync II scsi
    303 scsibus*	at wstsc0
    304 ivsc0		at zbus0		# IVS scsi
    305 scsibus*	at ivsc0
    306 mlhsc0		at zbus0		# Hacker scsi
    307 scsibus*	at mlhsc0
    308 otgsc0		at zbus0		# 12 gauge scsi
    309 scsibus*	at otgsc0
    310 zssc0		at zbus0		# Zeus scsi
    311 scsibus*	at zssc0
    312 mgnsc0		at zbus0		# Magnum scsi
    313 scsibus*	at mgnsc0
    314 wesc0		at zbus0		# Warp Engine scsi
    315 scsibus*	at wesc0
    316 bppcsc0		at zbus0		# BlizzardPPC 603e+ scsi
    317 scsibus*	at bppcsc0
    318 afsc0		at zbus0		# A4091 scsi
    319 scsibus*	at afsc0
    320 aftsc0		at mainbus0		# A4000T scsi
    321 scsibus*	at aftsc0
    322 flsc0		at zbus0		# FastlaneZ3 scsi
    323 scsibus*	at flsc0
    324 bzsc0		at zbus0		# Blizzard 1230 I,II scsi
    325 scsibus*	at bzsc0
    326 bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
    327 scsibus*	at bzivsc0
    328 bztzsc0 	at zbus0		# Blizzard 2060 scsi
    329 scsibus*	at bztzsc0
    330 cbsc0		at zbus0		# CyberSCSI I
    331 scsibus*	at cbsc0
    332 cbiisc0 	at zbus0		# CyberSCSI II
    333 scsibus*	at cbiisc0
    334 cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
    335 scsibus*	at cbiiisc0
    336 empsc0		at zbus0		# Emplant scsi
    337 scsibus*	at empsc0
    338 
    339 wdc0		at mainbus0		# A4000 & A1200 IDE bus
    340 wdc*		at zbus0		# Buddha / Catweasel
    341 
    342 atabus* 	at wdc? channel ?	# ATA bus
    343 wd*		at atabus? drive ?	#  + drives
    344 atapibus*	at atabus?		# ATAPI bus
    345 cd*		at atapibus? drive ?	# ATAPI CD-ROM drives
    346 sd*		at atapibus? drive ?	# ATAPI disk drives
    347 
    348 pccard0 	at mainbus0
    349 pcmcia* 	at pccard0
    350 com*		at pcmcia? function ?	# Modems and serial cards
    351 pcmcom* 	at pcmcia? function ?	# PCMCIA multi-port serial cards
    352 aic*		at pcmcia? function ?	# Adaptec APA-1460 SCSI
    353 wdc*		at pcmcia? function ?
    354 awi*		at pcmcia? function ?	# BayStack 650 (802.11FH)
    355 ep*		at pcmcia? function ?	# 3Com 3c589 and 3c562 Ethernet
    356 mbe*		at pcmcia? function ?	# MB8696x based Ethernet
    357 ne*		at pcmcia? function ?	# NE2000-compatible Ethernet
    358 sm*		at pcmcia? function ?	# Megahertz Ethernet
    359 mhzc*		at pcmcia? function ?	# Megahertz Ethernet/Modem combo cards
    360 com*		at mhzc?
    361 sm*		at mhzc?
    362 
    363 # each hard drive from low target to high
    364 # will configure to the next available sd unit number
    365 sd*		at scsibus? target ? lun ?	# scsi disks
    366 st*		at scsibus? target ? lun ?	# scsi tapes
    367 cd*		at scsibus? target ? lun ?	# scsi cds
    368 ch*		at scsibus? target ? lun ?	# scsi autochangers
    369 ss*		at scsibus? target ? lun ?	# scsi scanner
    370 uk*		at scsibus? target ? lun ?	# scsi unknown
    371 
    372 msc0		at zbus0		# A2232 MSC multiport serial.
    373 mfc0		at zbus0		# MultiFaceCard I/O board
    374 mfcs0		at mfc0 unit 0		# MFC serial
    375 mfcs1		at mfc0 unit 1		# MFC serial
    376 #mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
    377 #mfc1		at zbus0		# MultiFaceCard 2nd I/O board
    378 #mfcs2		at mfc1 unit 0
    379 #mfcs3		at mfc1 unit 1
    380 #mfcp1		at mfc1 unit 0
    381 
    382 hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
    383 #hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
    384 com*		at hyper? port ?	# Hypercom3/4 serial ports
    385 lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port
    386 
    387 #options 	IOBZCLOCK=22118400 	# default, uncomment the next line
    388 #options 	IOBZCLOCK=24000000	# if needed.
    389 
    390 iobl*		at zbus?		# zbus IOBlix
    391 com*		at iobl? port ?		# IOBlix serial ports
    392 lpt*		at iobl? port ?		# IOBlix parallel ports
    393 
    394 
    395 #
    396 # accept filters
    397 pseudo-device	accf_data		# "dataready" accept filter
    398 pseudo-device	accf_http		# "httpready" accept filter
    399 
    400 pseudo-device	loop			# loopback network interface
    401 pseudo-device	sl			# SLIP network interfaces
    402 pseudo-device	ppp			# PPP network interfaces
    403 pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    404 pseudo-device	tun			# network tunnel line discipline
    405 pseudo-device	tap			# virtual Ethernet
    406 #pseudo-device	gre			# generic L3 over IP tunnel
    407 pseudo-device	bpfilter		# Berkeley packet filter
    408 #pseudo-device	carp			# Common Address Redundancy Protocol
    409 pseudo-device	ipfilter		# IP Filter package
    410 pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
    411 #pseudo-device	faith			# IPv[46] tcp relay translation i/f
    412 pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
    413 pseudo-device	vlan			# IEEE 802.1q encapsulation
    414 pseudo-device	bridge			# simple inter-network bridging
    415 #options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
    416 pseudo-device	agr			# IEEE 802.3ad link aggregation
    417 #pseudo-device	pf			# PF packet filter
    418 #pseudo-device	pflog			# PF log if
    419 pseudo-device	fss			# file system snapshot device
    420 
    421 pseudo-device	view		4	# views (needed for grfcc)
    422 pseudo-device	pty			# pseudo-terminals
    423 pseudo-device	clockctl		# user control of clock subsystem
    424 
    425 #pseudo-device	wsfont			# wsfont(4) dynamic font loading support
    426 #pseudo-device	wsmux			# mouse & keyboard multiplexor
    427 
    428 pseudo-device	vnd			# vnode pseudo-disks
    429 #options 	VND_COMPRESSION		# compressed vnd(4)
    430 pseudo-device	ccd			# concatenated disk devices
    431 #pseudo-device	cgd			# cryptographic disk devices
    432 pseudo-device	raid			# RAIDframe disk driver
    433 options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    434 # Options to enable various other RAIDframe RAID types.
    435 # options 	RF_INCLUDE_EVENODD=1
    436 # options 	RF_INCLUDE_RAID5_RS=1
    437 # options 	RF_INCLUDE_PARITYLOGGING=1
    438 # options 	RF_INCLUDE_CHAINDECLUSTER=1
    439 # options 	RF_INCLUDE_INTERDECLUSTER=1
    440 # options 	RF_INCLUDE_PARITY_DECLUSTERING=1
    441 # options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
    442 
    443 #options 	RND_COM			# use "com" randomness as well (BROKEN)
    444 
    445 pseudo-device	ksyms			# /dev/ksyms (kernel symbols)
    446 pseudo-device	nsmb			# experimental - SMB requester
    447 
    448 # Veriexec
    449 #
    450 # a pseudo device needed for veriexec
    451 #pseudo-device	veriexec
    452 #
    453 # Uncomment the fingerprint methods below that are desired. Note that
    454 # removing fingerprint methods will have almost no impact on the kernel
    455 # code size.
    456 #
    457 #options VERIFIED_EXEC_FP_RMD160
    458 #options VERIFIED_EXEC_FP_SHA256
    459 #options VERIFIED_EXEC_FP_SHA384
    460 #options VERIFIED_EXEC_FP_SHA512
    461 #options VERIFIED_EXEC_FP_SHA1
    462 #options VERIFIED_EXEC_FP_MD5
    463 
    464 # Kernel root file system and dump configuration
    465 config		netbsd	root on ? type ?
    466