GENERIC revision 1.6
1 # $NetBSD: GENERIC,v 1.6 2011/01/14 12:54:39 phx Exp $ 2 # 3 # GENERIC machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/amigappc/conf/std.amigappc" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "GENERIC-$Revision: 1.6 $" 26 27 maxusers 8 28 29 # 30 # Mainboards to support (in addition to Amiga) 31 # 32 options BB060STUPIDROM # You need this, if you have a non-DraCo 33 # MC68060 with an OS ROM up to (at least) 34 # V40 (OS3.1) and want to boot with the 35 # bootblock. 36 # You do not need this if you have a DraCo, 37 # have no 68060 or NEVER use the bootblock 38 options P5PPC68KBOARD # Phase5 PPC/68K board support 39 40 # 41 # Standard system options 42 # 43 options INSECURE # disable kernel security levels 44 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 45 options NTP # NTP phase/frequency locked loop 46 47 options KTRACE # system call tracing support 48 options SCSIVERBOSE # human readable SCSI error messages 49 options USERCONF # userconf(4) support 50 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 51 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 52 53 # Support for System V IPC facilities. 54 options SYSVSHM # System V-like shared memory 55 options SYSVMSG # System V-like messages 56 options SYSVSEM # System V-like semaphores 57 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 58 59 # Enable experimental buffer queue strategy for better responsiveness under 60 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 61 #options BUFQ_READPRIO 62 #options BUFQ_PRIOCSCAN 63 64 # 65 # Diagnostic/debugging support options 66 # 67 #options DIAGNOSTIC # Extra kernel sanity checks 68 #options DEBUG # Enable misc. kernel debugging code 69 #options DEBUG_KERNEL_START 70 #options KMEMSTATS # kernel memory statistics (vmstat -m) 71 options DDB # in-kernel debugger 72 #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 73 options DDB_HISTORY_SIZE=512 # Enable history editing in DDB 74 #options SCSIDEBUG # Add SCSI debugging statements 75 #options SERCONSOLE # console via Amiga serial port 76 #makeoptions DEBUG="-g" # compile full symbol table 77 78 # 79 # Compatibility option 80 # 81 options COMPAT_09 # NetBSD 0.9, 82 options COMPAT_10 # NetBSD 1.0, 83 options COMPAT_11 # NetBSD 1.1, 84 options COMPAT_12 # NetBSD 1.2, 85 options COMPAT_13 # NetBSD 1.3, 86 options COMPAT_14 # NetBSD 1.4, 87 options COMPAT_15 # NetBSD 1.5, 88 options COMPAT_16 # NetBSD 1.6, 89 options COMPAT_20 # NetBSD 2.0, 90 options COMPAT_30 # NetBSD 3.0 compatibility. 91 options COMPAT_40 # NetBSD 4.0 compatibility. 92 options COMPAT_50 # NetBSD 5.0 compatibility. 93 options COMPAT_43 # and 4.3BSD 94 #options COMPAT_386BSD_MBRPART # recognize old partition ID 95 #options COMPAT_LINUX # Linux binary compatibility 96 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 97 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 98 99 # 100 # File systems 101 # 102 file-system FFS # UFS 103 file-system EXT2FS # second extended file system (linux) 104 file-system LFS # log-structured file system 105 file-system MFS # memory file system 106 file-system NFS # Network file System client 107 file-system CD9660 # ISO 9660 + Rock Ridge file system 108 file-system MSDOSFS # MS-DOS file system 109 file-system ADOSFS # AmigaDOS file system 110 file-system FDESC # /dev/fd 111 file-system KERNFS # /kern 112 file-system NULLFS # loopback file system 113 file-system OVERLAY # overlay file system 114 file-system PROCFS # /proc 115 file-system UMAPFS # NULLFS + uid and gid remapping 116 file-system UNION # union file system 117 file-system SMBFS # experimental - CIFS; also needs nsmb (below) 118 file-system PTYFS # /dev/pts/N support 119 file-system TMPFS # Efficient memory file-system 120 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 121 122 # File system options 123 #options FFS_EI # FFS Endian Independant support 124 options WAPBL # File system journaling support - Experimental 125 126 options QUOTA # User and group quotas in FFS 127 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 128 options NFSSERVER # Network File System server side code 129 #options FFS_NO_SNAPSHOT # No FFS snapshot support 130 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 131 # immutable) behave as system flags. 132 133 # 134 # Networking options 135 # 136 #options GATEWAY # Packet forwarding 137 options INET # IP networking support (Required) 138 options INET6 # IPV6 139 #options IPSEC # IP security 140 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 141 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 142 #options IPSEC_DEBUG # debug for IP security 143 #options MROUTING # Multicast routing 144 #options DIRECTED_BROADCAST # Broadcast across subnets 145 #options PIM # Protocol Independent Multicast 146 #options ISO,TPIP # OSI 147 #options EON # OSI tunneling over IP 148 #options NETATALK # AppleTalk networking protocols 149 options PPP_BSDCOMP # BSD-Compress compression support for PPP 150 options PPP_DEFLATE # Deflate compression support for PPP 151 options PPP_FILTER # Active filter support for PPP (requires bpf) 152 options PFIL_HOOKS # pfil(9) packet filter hooks 153 options IPFILTER_LOG # ipmon(8) log support 154 options IPFILTER_LOOKUP # ippool(8) support 155 options IPFILTER_COMPAT # Compat for IP-Filter 156 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 157 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 158 159 #options ALTQ # Manipulate network interfaces' output queues 160 #options ALTQ_BLUE # Stochastic Fair Blue 161 #options ALTQ_CBQ # Class-Based Queueing 162 #options ALTQ_CDNR # Diffserv Traffic Conditioner 163 #options ALTQ_FIFOQ # First-In First-Out Queue 164 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 165 #options ALTQ_HFSC # Hierarchical Fair Service Curve 166 #options ALTQ_LOCALQ # Local queueing discipline 167 #options ALTQ_PRIQ # Priority Queueing 168 #options ALTQ_RED # Random Early Detection 169 #options ALTQ_RIO # RED with IN/OUT 170 #options ALTQ_WFQ # Weighted Fair Queueing 171 172 # 173 # Amiga specific options 174 # 175 options RETINACONSOLE # enable code to allow retina to be console 176 options ULOWELLCONSOLE # enable code to allow a2410 to be console 177 options CL5426CONSOLE # Cirrus console 178 options CV64CONSOLE # CyberVision console 179 options TSENGCONSOLE # Tseng console 180 options CV3DCONSOLE # CyberVision 64/3D console 181 182 options GRF_ECS # Enhanced Chip Set 183 options GRF_NTSC # NTSC 184 options GRF_PAL # PAL 185 options GRF_A2024 # Support for the A2024 186 options GRF_AGA # AGA Chip Set 187 options GRF_AGA_VGA # AGA VGAONLY timing 188 options GRF_SUPER72 # AGA Super-72 189 #options KFONT_8X11 # 8x11 font 190 191 # select a font for the console according to the character set and keymap 192 # you want to use 193 options KFONT_CONS_ISO8859_1 194 #options KFONT_CONS_ISO8859_2 195 196 # This is how you would tell the kernel the A2410 oscillator frequencies: 197 # The used frequencies are the defaults, and do not need option setting 198 #options ULOWELL_OSC1=36000000 199 #options ULOWELL_OSC2=66667000 200 201 # This is how you specify the blitting speed, higher values may speed up blits 202 # a littel bit. If you raise this value too much some trash may appear. 203 # the commented version is the default. 204 #options RH_MEMCLK=61000000 205 # this option enables the 64 bit sprite which does not work 206 # for quite a few people. E.g. The cursor sprite will turn to a block 207 # when moved to the top of the screen in X. 208 #options RH_64BIT_SPRITE 209 # enables fast scroll code appears to now work on 040 systems. 210 #options RETINA_SPEED_HACK 211 # enables the Hardwarecursor which does not work on some systems. 212 #options RH_HARDWARECURSOR 213 214 # 215 # Device configuration 216 # 217 mainbus0 at root 218 cpu0 at mainbus0 219 kbd0 at mainbus0 # Amiga keyboard 220 zbus0 at mainbus0 # ZorroII/III expansion bus 221 ser0 at mainbus0 # Amiga onboard serial 222 par0 at mainbus0 # Amiga onboard parallel 223 ms* at mainbus0 # Amiga mice 224 fdc0 at mainbus0 # Amiga FDC 225 fd* at fdc0 unit ? # floppy disks on the later 226 a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 227 aucc* at mainbus0 # Amiga CC audio 228 audio* at aucc? 229 230 # wscons aware interface to amiga custom chips. 231 # If you enable it enable also wskbd. 232 #amidisplaycc0 at mainbus0 # wscons interface to custom chips 233 #wsdisplay0 at amidisplaycc0 console ? 234 #options WSEMUL_VT100 235 #options FONT_VT220L8x10 236 #options FONT_VT220ISO8x16 237 # 238 # Keyboard device. Optionally can attach a wskbd. 239 # wskbd works together with a wsdisplay so enable them both if you will. 240 # Don't enable wskbd if you use ite. 241 # 242 # XXX in std.amiga: kbd0 at mainbus0 243 #wskbd0 at kbd0 console ? 244 #wsmouse* at ms? 245 246 # 247 # Graphics devices 248 # 249 grfcc0 at mainbus0 # custom chips 250 grfrt0 at zbus0 # retina II 251 grfrh0 at zbus0 # retina III 252 grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 253 grful0 at zbus0 # A2410 254 grfcv0 at zbus0 # CyberVision 64 255 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 256 grfcv3d0 at zbus0 # CyberVision 64/3D 257 258 grf0 at grfcc0 259 grf1 at grfrt0 260 grf2 at grfrh0 261 grf3 at grfcl? 262 grf4 at grful0 263 grf5 at grfcv0 264 grf6 at grfet? 265 grf7 at grfcv3d0 266 ite0 at grf0 # terminal emulators for grfs 267 ite1 at grf1 # terminal emulators for grfs 268 ite2 at grf2 # terminal emulators for grfs 269 ite3 at grf3 # terminal emulators for grfs 270 ite4 at grf4 # terminal emulators for grfs 271 ite5 at grf5 # terminal emulators for grfs 272 ite6 at grf6 # terminal emulators for grfs 273 ite7 at grf7 # terminal emulators for grfs 274 275 # 276 # Zorro-II, Zorro-III devices (sans graphics) 277 # 278 repulse* at zbus0 # ALiENDESiGN Repulse 279 audio* at repulse? 280 281 toccata* at zbus0 # MacroSystem GmbH Toccata 282 audio* at toccata? 283 284 # Ethernet cards: 285 le* at zbus0 # A2065, Ameristar, Ariadne 286 ne* at zbus0 # AriadneII, X-surf 287 ed* at zbus0 # Hydra, ASDG LanRover 288 es* at zbus0 # CEI A4066 EthernetPLUS 289 qn* at zbus0 # Quicknet 290 291 # Arcnet 292 bah* at zbus0 # C=/Ameristar A2060 / 560 293 294 # Greater Valley Product Bus 295 gvpbus* at zbus0 296 297 # scsi stuff, all possible 298 gtsc0 at gvpbus? # GVP series II scsi 299 scsibus* at gtsc0 300 ahsc0 at mainbus0 # A3000 scsi 301 scsibus* at ahsc0 302 atzsc0 at zbus0 # A2091 scsi 303 scsibus* at atzsc0 304 wstsc0 at zbus0 # Wordsync II scsi 305 scsibus* at wstsc0 306 ivsc0 at zbus0 # IVS scsi 307 scsibus* at ivsc0 308 mlhsc0 at zbus0 # Hacker scsi 309 scsibus* at mlhsc0 310 otgsc0 at zbus0 # 12 gauge scsi 311 scsibus* at otgsc0 312 zssc0 at zbus0 # Zeus scsi 313 scsibus* at zssc0 314 mgnsc0 at zbus0 # Magnum scsi 315 scsibus* at mgnsc0 316 wesc0 at zbus0 # Warp Engine scsi 317 scsibus* at wesc0 318 bppcsc0 at zbus0 # BlizzardPPC 603e+ scsi 319 scsibus* at bppcsc0 320 afsc0 at zbus0 # A4091 scsi 321 scsibus* at afsc0 322 aftsc0 at mainbus0 # A4000T scsi 323 scsibus* at aftsc0 324 flsc0 at zbus0 # FastlaneZ3 scsi 325 scsibus* at flsc0 326 bzsc0 at zbus0 # Blizzard 1230 I,II scsi 327 scsibus* at bzsc0 328 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 329 scsibus* at bzivsc0 330 bztzsc0 at zbus0 # Blizzard 2060 scsi 331 scsibus* at bztzsc0 332 cbsc0 at zbus0 # CyberSCSI I 333 scsibus* at cbsc0 334 cbiisc0 at zbus0 # CyberSCSI II 335 scsibus* at cbiisc0 336 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 337 scsibus* at cbiiisc0 338 empsc0 at zbus0 # Emplant scsi 339 scsibus* at empsc0 340 341 wdc0 at mainbus0 # A4000 & A1200 IDE bus 342 wdc* at zbus0 # Buddha / Catweasel 343 344 atabus* at wdc? channel ? # ATA bus 345 wd* at atabus? drive ? # + drives 346 atapibus* at atabus? # ATAPI bus 347 cd* at atapibus? drive ? # ATAPI CD-ROM drives 348 sd* at atapibus? drive ? # ATAPI disk drives 349 350 pccard0 at mainbus0 351 pcmcia* at pccard0 352 com* at pcmcia? function ? # Modems and serial cards 353 pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 354 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 355 wdc* at pcmcia? function ? 356 awi* at pcmcia? function ? # BayStack 650 (802.11FH) 357 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 358 mbe* at pcmcia? function ? # MB8696x based Ethernet 359 ne* at pcmcia? function ? # NE2000-compatible Ethernet 360 sm* at pcmcia? function ? # Megahertz Ethernet 361 mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 362 com* at mhzc? 363 sm* at mhzc? 364 365 # each hard drive from low target to high 366 # will configure to the next available sd unit number 367 sd* at scsibus? target ? lun ? # scsi disks 368 st* at scsibus? target ? lun ? # scsi tapes 369 cd* at scsibus? target ? lun ? # scsi cds 370 ch* at scsibus? target ? lun ? # scsi autochangers 371 ss* at scsibus? target ? lun ? # scsi scanner 372 uk* at scsibus? target ? lun ? # scsi unknown 373 374 msc0 at zbus0 # A2232 MSC multiport serial. 375 mfc0 at zbus0 # MultiFaceCard I/O board 376 mfcs0 at mfc0 unit 0 # MFC serial 377 mfcs1 at mfc0 unit 1 # MFC serial 378 #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 379 #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 380 #mfcs2 at mfc1 unit 0 381 #mfcs3 at mfc1 unit 1 382 #mfcp1 at mfc1 unit 0 383 384 hyper* at zbus? # zbus HyperCom3/3+/4/4+ 385 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 386 com* at hyper? port ? # Hypercom3/4 serial ports 387 lpt* at hyper? port ? # Hypercom3+/4+ parallel port 388 389 #options IOBZCLOCK=22118400 # default, uncomment the next line 390 #options IOBZCLOCK=24000000 # if needed. 391 392 iobl* at zbus? # zbus IOBlix 393 com* at iobl? port ? # IOBlix serial ports 394 lpt* at iobl? port ? # IOBlix parallel ports 395 396 397 # 398 # accept filters 399 pseudo-device accf_data # "dataready" accept filter 400 pseudo-device accf_http # "httpready" accept filter 401 402 pseudo-device loop # loopback network interface 403 pseudo-device sl # SLIP network interfaces 404 pseudo-device ppp # PPP network interfaces 405 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 406 pseudo-device tun # network tunnel line discipline 407 pseudo-device tap # virtual Ethernet 408 #pseudo-device gre # generic L3 over IP tunnel 409 pseudo-device bpfilter # Berkeley packet filter 410 #pseudo-device carp # Common Address Redundancy Protocol 411 pseudo-device ipfilter # IP Filter package 412 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 413 #pseudo-device faith # IPv[46] tcp relay translation i/f 414 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 415 pseudo-device vlan # IEEE 802.1q encapsulation 416 pseudo-device bridge # simple inter-network bridging 417 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 418 pseudo-device agr # IEEE 802.3ad link aggregation 419 #pseudo-device pf # PF packet filter 420 #pseudo-device pflog # PF log if 421 pseudo-device fss # file system snapshot device 422 423 pseudo-device view 4 # views (needed for grfcc) 424 pseudo-device pty # pseudo-terminals 425 pseudo-device clockctl # user control of clock subsystem 426 427 #pseudo-device wsfont # wsfont(4) dynamic font loading support 428 #pseudo-device wsmux # mouse & keyboard multiplexor 429 430 pseudo-device vnd # vnode pseudo-disks 431 #options VND_COMPRESSION # compressed vnd(4) 432 pseudo-device ccd 4 # concatenated disk devices 433 #pseudo-device cgd 4 # cryptographic disk devices 434 pseudo-device raid 8 # RAIDframe disk driver 435 options RAID_AUTOCONFIG # auto-configuration of RAID components 436 # Options to enable various other RAIDframe RAID types. 437 # options RF_INCLUDE_EVENODD=1 438 # options RF_INCLUDE_RAID5_RS=1 439 # options RF_INCLUDE_PARITYLOGGING=1 440 # options RF_INCLUDE_CHAINDECLUSTER=1 441 # options RF_INCLUDE_INTERDECLUSTER=1 442 # options RF_INCLUDE_PARITY_DECLUSTERING=1 443 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 444 445 pseudo-device rnd # /dev/random and in-kernel generator 446 #options RND_COM # use "com" randomness as well (BROKEN) 447 448 pseudo-device ksyms # /dev/ksyms (kernel symbols) 449 pseudo-device nsmb # experimental - SMB requester 450 451 # Veriexec 452 # 453 # a pseudo device needed for veriexec 454 #pseudo-device veriexec 1 455 # 456 # Uncomment the fingerprint methods below that are desired. Note that 457 # removing fingerprint methods will have almost no impact on the kernel 458 # code size. 459 # 460 #options VERIFIED_EXEC_FP_RMD160 461 #options VERIFIED_EXEC_FP_SHA256 462 #options VERIFIED_EXEC_FP_SHA384 463 #options VERIFIED_EXEC_FP_SHA512 464 #options VERIFIED_EXEC_FP_SHA1 465 #options VERIFIED_EXEC_FP_MD5 466 467 # Kernel root file system and dump configuration 468 config netbsd root on ? type ? 469
Indexes created Thu Oct 02 14:10:14 GMT 2025