OpenGrok

# $NetBSD: NULL,v 1.17 2005/01/24 15:49:29 is Exp $
#
# This file was automatically created. Changes will be
# lost when running make in this directory.
#
# Created from:
#$ NetBSD: GENERIC,v 1.129 1999/10/15 21:50:34 is Exp $

include "arch/amigappc/conf/std.amigappc"

maxusers	8
options 	RTC_OFFSET=0

#mainboards to support (in addition to Amiga)

#options 	BB060STUPIDROM	# You need this, if you have a non-DraCo
				# MC68060 with an OS ROM up to (at least)
				# V40 (OS3.1) and want to boot with the
				# bootblock.
				# You do not need this if you have a DraCo,
				# have no 68060 or NEVER use the bootblock
#options 	P5PPC68KBOARD	# Phase5 PPC/68K board support

#processors this kernel should support

#options		PPC_OEA this is in std.amigappc
options 	PPC604E
options 	PPC603E

#options 	M68060		# support for 060
#options 	M060SP		# MC68060 software support (Required for 060)

#options 	M68040		# support for 040
#options 	FPSP		# MC68040 floating point support
#options 	M68030		# support for 030
#options 	M68020		# support for 020/851
#options 	FPU_EMULATE	# FPU emulation

#Networking options

#options 	INET		# IP networking support (Required)
#options 	GATEWAY		# Packet forwarding
#options 	DIRECTED_BROADCAST	# Broadcast across subnets
#options 	MROUTING	# Multicast routing
#options 	PIM		# Protocol Independent Multicast
#options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
#options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25
#options 	NETATALK	# AppleTalk networking protocols
#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
#options 	PPP_DEFLATE	# Deflate compression support for PPP
#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
#options 	IPFILTER_LOG	# ipmon(8) log support
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

file-system 	FFS		# Berkeley fast file system
#file-system 	EXT2FS		# second extended file system (linux)
#file-system 	LFS		# log-structured filesystem (experimental)
#file-system 	MFS		# Memory based filesystem
#file-system 	NFS		# Network File System client side code
#file-system 	ADOSFS		# AmigaDOS file system
#file-system 	CD9660		# ISO 9660 + Rock Ridge filesystem
#file-system 	MSDOSFS		# MS-DOS filesystem
#file-system 	FDESC		# user file descriptor filesystem
#file-system 	KERNFS		# kernel data-structure filesystem
#file-system 	NULLFS		# loopback filesystem
#file-system 	PORTAL		# Portal filesystem
#file-system 	PROCFS		# /proc filesystem
#file-system 	UMAPFS		# NULLFS + uid and gid remapping
#file-system 	UNION		# union filesystem

#Filesystem options
#options 	QUOTA		# User and group quotas in FFS
#options 	FFS_EI		# FFS Endian Independant support
#options 	NFSSERVER	# Network File System server side code
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.

#Compatibility options for various existing systems

#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
#options 	COMPAT_43	# compatibility with 4.3BSD interfaces
#options 	COMPAT_09	# compatibility with NetBSD 0.9
#options 	COMPAT_10	# compatibility with NetBSD 1.0
#options 	COMPAT_12	# compatibility with NetBSD 1.2
#options 	COMPAT_13	# compatibility with NetBSD 1.3
#options 	COMPAT_14	# compatibility with NetBSD 1.4
#options 	COMPAT_SUNOS	# Support to run Sun (m68k) executables
#options 	COMPAT_SVR4	# Support to run SVR4 (m68k) executables
#options 	COMPAT_NOMID	# allow nonvalid machine id executables
#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.

#Support for System V IPC facilities.

#options 	SYSVSHM		# System V-like shared memory
#options 	SYSVMSG		# System V-like messages
#options 	SYSVSEM		# System V-like semaphores

#Support for various kernel options

#options 	KTRACE		# system call tracing support
#options 	LKM		# Loadable kernel modules
#options 	INSECURE	# disable kernel security levels
#options 	SCSIVERBOSE	# human readable SCSI error messages
#options 	NTP		# NTP phase/frequency locked loop
options 	USERCONF	# userconf(4) support
#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)

#Misc. debugging options

#options 	DDB		# Kernel debugger
#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
#options 	DIAGNOSTIC	# Extra kernel sanity checks
#options 	DEBUG		# Enable misc. kernel debugging code
#options 	SYSCALL_DEBUG	# debug all syscalls.
#options 	SCSIDEBUG	# Add SCSI debugging statements
#options 	PANICBUTTON	# Forced crash via keypress (?)

#Amiga specific options

#options 	LIMITMEM=24	# Do not use more than LIMITMEM MB of the
				# first bank of RAM. (default: unlimited)
#options 	NKPTADD=4	# set this for 4 additional KPT pages
#options 	NKPTADDSHIFT=24	# set this for 1 additional KPT page
				# per 16 MB (1<<24 bytes) of RAM
				# define and decrease this, or define and
				# increase NKPTADD if you get "out of PT pages"
				# panics.

#ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
#before the 10 secondinterval ends, or that KBDRESET does work at all.
#options 	KBDRESET	# sync on Ctrl-Amiga-Amiga

#These options improve performance with the built-in serial port
#on slower Amigas.  Try the larger buffers first then lev6_defer.
#options 	SERIBUF_SIZE=4096
#options 	SEROBUF_SIZE=32
#options 	LEV6_DEFER	# defers l6 to l4 (below serial l5)

#options 	RETINACONSOLE	# enable code to allow retina to be console

#options 	ULOWELLCONSOLE	# enable code to allow a2410 to be console
#options 	CL5426CONSOLE	# Cirrus console
#options 	CV64CONSOLE	# CyberVision console
#options 	TSENGCONSOLE	# Tseng console
#options 	CV3DCONSOLE	# CyberVision 64/3D console

#options 	GRF_ECS		# Enhanced Chip Set
options 	GRF_NTSC	# NTSC
options 	GRF_PAL		# PAL
#options 	GRF_A2024	# Support for the A2024
options 	GRF_AGA		# AGA Chip Set
options 	GRF_AGA_VGA	# AGA VGAONLY timing
#options 	GRF_SUPER72	# AGA Super-72

#options 	KFONT_8X11	# 8x11 font

#This is how you would tell the kernel the A2410 oscillator frequencies:
#The used frequencies are the defaults, and do not need option setting
#options 	ULOWELL_OSC1=36000000
#options 	ULOWELL_OSC2=66667000

#This is how you specify the blitting speed, higher values may speed up blits
#a littel bit.  If you raise this value too much some trash may appear.
#the commented version is the default.
#options 	RH_MEMCLK=61000000
#this option enables the 64 bit sprite which does not work
#for quite a few people.  E.g. The cursor sprite will turn to a block
#when moved to the top of the screen in X.
#options 	RH_64BIT_SPRITE
#enables fast scroll code appears to now work on 040 systems.
#options 	RETINA_SPEED_HACK
#enables the Hardwarecursor which does not work on some systems.
#options 	RH_HARDWARECURSOR

grfcc0		at mainbus0		# custom chips
#grfrt0		at zbus0		# retina II
#grfrh0		at zbus0		# retina III
#grfcl*		at zbus0		# Picasso II/Piccalo/Spectrum
#grful0		at zbus0		# A2410
#grfcv0		at zbus0		# CyberVision 64
#grfet*		at zbus0		# Tseng (oMniBus, Domino, Merlin)
#grfcv3d0	at zbus0		# CyberVision 64/3D

grf0		at grfcc0
#grf1		at grfrt0
#grf2		at grfrh0
#grf3		at grfcl?
#grf4		at grful0
#grf5		at grfcv0
#grf6		at grfet?
#grf7		at grfcv3d0

ite0		at grf0			# terminal emulators for grfs
#ite1		at grf1			# terminal emulators for grfs
#ite2		at grf2			# terminal emulators for grfs
#ite3		at grf3			# terminal emulators for grfs
#ite4		at grf4			# terminal emulators for grfs
#ite5		at grf5			# terminal emulators for grfs
#ite6		at grf6			# terminal emulators for grfs
#ite7		at grf7			# terminal emulators for grfs

#msc0		at zbus0		# A2232 MSC multiport serial.
#mfc0		at zbus0		# MultiFaceCard I/O board
#mfcs0		at mfc0 unit 0		# MFC serial
#mfcs1		at mfc0 unit 1		# MFC serial
#mfcp0		at mfc0 unit 0		# MFC parallel [not available yet]
#mfc1		at zbus0		# MultiFaceCard 2nd I/O board
#mfcs2		at mfc1 unit 0
#mfcs3		at mfc1 unit 1
#mfcp1		at mfc1 unit 0

#hyper*		at zbus?		# zbus HyperCom3/3+/4/4+
#hyper*		at mainbus0		# not yet: HyperCom1 + HyperCom3
#com*		at hyper? port ?	# Hypercom3/4 serial ports
#lpt*		at hyper? port ?	# Hypercom3+/4+ parallel port

#Amiga Mainboard devices (sans graphics and keyboard)

#ser0		at mainbus0		# Amiga onboard serial
#par0		at mainbus0		# Amiga onboard parallel
ms*		at mainbus0		# Amiga mice
#fdc0		at mainbus0		# Amiga FDC
#fd*		at fdc0 unit ?		# floppy disks on the later
a34kbbc0	at mainbus0		# A3000/A4000 battery backed clock
#a2kbbc0 	at mainbus0		# A2000 battery backed clock
#aucc*		at mainbus0		# Amiga CC audio
#audio*		at aucc?

#Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)

#Alas, Melody-Z2 dont configure in the DraCo bus.
#melody* 	at zbus0		# Melody MPEG audio decoder
#audio*		at melody?

#Ethernet cards:
#le*		at zbus0		# A2065, Ameristar, Ariadne
#ne*		at zbus0		# AriadneII
#ed*		at zbus0		# Hydra, ASDG LanRover
#es*		at zbus0		# CEI A4066 EthernetPLUS
#qn*		at zbus0		# Quicknet

#bah*		at zbus0		# C=/Ameristar A2060 / 560

#Greater Valley Product Bus
#gvpbus* 	at zbus0

#scsi stuff, all possible
#gtsc0		at gvpbus?		# GVP series II scsi
#scsibus*	at gtsc0
#ahsc0		at mainbus0		# A3000 scsi
#scsibus*	at ahsc0
#atzsc0		at zbus0		# A2091 scsi
#scsibus*	at atzsc0
#wstsc0		at zbus0		# Wordsync II scsi
#scsibus*	at wstsc0
#ivsc0		at zbus0		# IVS scsi
#scsibus*	at ivsc0
#mlhsc0		at zbus0		# Hacker scsi
#scsibus*	at mlhsc0
#otgsc0		at zbus0		# 12 gauge scsi
#scsibus*	at otgsc0
#zssc0		at zbus0		# Zeus scsi
#scsibus*	at zssc0
#mgnsc0		at zbus0		# Magnum scsi
#scsibus*	at mgnsc0
#wesc0		at zbus0		# Warp Engine scsi
#scsibus*	at wesc0
#afsc0		at zbus0		# A4091 scsi
#scsibus*	at afsc0
#aftsc0		at mainbus0		# A4000T scsi
#scsibus*	at aftsc0
#flsc0		at zbus0		# FastlaneZ3 scsi
#scsibus*	at flsc0
#bzsc0		at zbus0		# Blizzard 1230 I,II scsi
#scsibus*	at bzsc0
#bzivsc0 	at zbus0		# Blizzard 12x0 IV scsi
#scsibus*	at bzivsc0
#bztzsc0 	at zbus0		# Blizzard 2060 scsi
#scsibus*	at bztzsc0
#cbsc0		at zbus0		# CyberSCSI I
#scsibus*	at cbsc0
#cbiisc0 	at zbus0		# CyberSCSI II
#scsibus*	at cbiisc0
#cbiiisc0 	at zbus0		# Cyberstorm mk.III/Cyberstorm PPC SCSI
#scsibus*	at cbiiisc0
#empsc0		at zbus0		# Emplant scsi
#scsibus*	at empsc0
#idesc0		at mainbus0		# A4000 & A1200 IDE
#scsibus*	at idesc0

#each hard drive from low target to high
#will configure to the next available sd unit number
#sd*	at scsibus? target ? lun ?	# scsi disks
#st*	at scsibus? target ? lun ?	# scsi tapes
#cd*	at scsibus? target ? lun ?	# scsi cds
#ss*	at scsibus? target ? lun ?	# scsi scanner
#ch*	at scsibus? target ? lun ?	# scsi autochangers
#uk*	at scsibus? target ? lun ?	# scsi unknown

#pseudo-device	loop			# loopback network interface
#pseudo-device	sl		1	# SLIP network interfaces
#pseudo-device	ppp		1	# PPP network interfaces
#pseudo-device	tun		1	# network tunnel line discipline
#pseudo-device	gre		2	# generic L3 over IP tunnel
#pseudo-device	bpfilter	16	# Berkeley packet filter
#pseudo-device	ipfilter		# IP Filter package

pseudo-device	view		4	# views (needed for grfcc)
pseudo-device	pty			# pseudo-terminals

#pseudo-device	vnd		4	# vnode pseudo-disks
#pseudo-device	ccd		4	# concatenated disk devices
#pseudo-device	raid		4	# RAIDframe disk driver

#rnd is EXPERIMENTAL at this point.
#pseudo-device	rnd			# /dev/random and in-kernel generator
#options 	RND_COM			# use "com" randomness as well (BROKEN)

config	netbsd root on ? type ?