ARCTIC revision 1.65
1# $NetBSD: ARCTIC,v 1.65 2013/06/30 21:38:55 rmind Exp $ 2# $OpenBSD: ARCTIC,v 1.12 1999/08/29 12:14:03 niklas Exp $ 3# 4# configuration file for DeskStation 5# 6 7include "arch/arc/conf/std.arc" 8 9#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11maxusers 32 # estimated number of users 12 13# Platform support 14options PLATFORM_DESKTECH_ARCSTATION_I # DeskStation rPC44 15options PLATFORM_DESKTECH_TYNE # DeskStation Tyne 16 17# Misc. arc-specific options 18options PCCONS_FORCE_WORD # Max out at 16bit accesses to the 19 # VGA memory 20 21# Standard system options 22 23options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 24options NTP # NTP phase/frequency locked loop 25 26options KTRACE # system call tracing via ktrace(1) 27 28options SYSVMSG # System V-like message queues 29options SYSVSEM # System V-like semaphores 30options SYSVSHM # System V-like memory sharing 31 32options USERCONF # userconf(4) support 33#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 34#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 35 36# Diagnostic/debugging support options 37options DIAGNOSTIC # cheap kernel consistency checks 38#options DEBUG # expensive debugging checks/support 39#options KMEMSTATS # kernel memory statistics (vmstat -m) 40options DDB # in-kernel debugger 41#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 42#options KGDB # remote gdb 43#options KGDB_DEVRATE=19200 # kernel gdb port rate (default 9600) 44#options KGDB_DEV="17*256+0" # device for kernel gdb 45#makeoptions DEBUG="-g" # compile full symbol table 46 47# Compatibility options 48#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 49options COMPAT_10 # NetBSD 1.0, 50options COMPAT_11 # NetBSD 1.1, 51options COMPAT_12 # NetBSD 1.2, 52options COMPAT_13 # NetBSD 1.3, 53options COMPAT_14 # NetBSD 1.4, 54options COMPAT_15 # NetBSD 1.5, 55options COMPAT_16 # NetBSD 1.6, 56options COMPAT_20 # NetBSD 2.0, 57options COMPAT_30 # NetBSD 3.0, 58options COMPAT_40 # NetBSD 4.0 compatibility. 59options COMPAT_43 # and 4.3BSD 60options COMPAT_386BSD_MBRPART # recognize old partition ID 61 62# mipsel specific 63options COMPAT_ULTRIX # Ultrix binary compatibility 64options EXEC_ECOFF # Ultrix RISC binaries are ECOFF format 65options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 66 67# File systems 68file-system FFS # fast filesystem 69#file-system EXT2FS # second extended file system (linux) 70#file-system LFS # log-structured file system 71file-system MFS # memory file system 72file-system NTFS # Windows/NT file system (experimental) 73file-system CD9660 # ISO 9660 + Rock Ridge file system 74file-system MSDOSFS # MS-DOS file system 75file-system NFS # Network File System client 76file-system FDESC # /dev/fd 77file-system KERNFS # /kern 78#file-system NULLFS # loopback file system 79#file-system OVERLAY # overlay file system 80file-system PROCFS # /proc 81#file-system UMAPFS # NULLFS + uid and gid remapping 82#file-system UNION # union file system 83#file-system CODA # Coda File System; also needs vcoda (below) 84file-system PTYFS # /dev/pts/N support 85 86# File system options 87options QUOTA # legacy UFS quotas 88options QUOTA2 # new, in-filesystem UFS quotas 89#options FFS_EI # FFS Endian Independent support 90options NFSSERVER # Network File System server 91#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 92 # immutable) behave as system flags. 93#options FFS_NO_SNAPSHOT # No FFS snapshot support 94 95# Networking options 96#options GATEWAY # IP packet forwarding 97options INET # IP + ICMP + TCP + UDP 98options INET6 # IPV6 99#options IPSEC # IP security 100#options IPSEC_DEBUG # debug for IP security 101#options MROUTING # IP multicast routing 102#options PIM # Protocol Independent Multicast 103options NETATALK # AppleTalk networking protocols 104options PPP_BSDCOMP # BSD-Compress compression support for PPP 105options PPP_DEFLATE # Deflate compression support for PPP 106options PPP_FILTER # Active filter support for PPP (requires bpf) 107options IPFILTER_LOG # ipmon(8) log support 108options IPFILTER_LOOKUP # ippool(8) support 109options IPFILTER_COMPAT # Compat for IP-Filter 110#options IPFILTER_DEFAULT_BLOCK # block all packets by default 111#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 112 113# These options enable verbose messages for several subsystems. 114# Warning, these may compile large string tables into the kernel! 115#options EISAVERBOSE # verbose EISA device autoconfig messages 116#options PCIVERBOSE # verbose PCI device autoconfig messages 117#options PCI_CONFIG_DUMP # verbosely dump PCI config space 118options SCSIVERBOSE # human readable SCSI error messages 119 120# wscons terminal emulation 121options WSEMUL_VT100 # VT100 emulation 122options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 123 124# Kernel root file system and dump configuration. 125options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM 126config netbsd root on ? type ? 127 128# 129# Device configuration 130# 131 132mainbus0 at root 133cpu* at mainbus0 134 135#### ISA bus devices 136 137# PLATFORM_DESKTECH_ARCSTATION_I 138arcsisabr* at mainbus0 # DeskStation rPC44 ISA host bridge. 139isa* at arcsisabr? 140 141# PLATFORM_DESKTECH_TYNE 142tyneisabr* at mainbus0 # DeskStation Tyne ISA host bridge. 143isa* at tyneisabr? 144 145#isadma0 at isa? 146 147timer0 at isa? port 0x40 irq 0 148mcclock0 at isa? port 0x70 149 150pc0 at isa? irq 1 # generic PC console device 151opms0 at isa? irq 12 # PS/2 auxiliary port mouse 152#vga0 at isa? 153#pckbc0 at isa? # PC keyboard controller 154com0 at isa? port 0x3f8 irq 4 155com1 at isa? port 0x2f8 irq 3 156com2 at isa? port 0x3e8 irq 4 157com3 at isa? port 0x2e8 irq 3 158ast0 at isa? port 0x1a0 irq 3 # AST 4-port serial cards 159com* at ast? slave ? 160 161# Joystick driver. Probe is a little strange; add only if you have one. 162joy0 at isa? port 0x201 163 164# ISA ST506, ESDI, and IDE controllers 165# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will 166# fall back to 16bits I/O if 32bits I/O are not functional). 167# Some controllers pass the initial 32bit test, but will fail later. 168wdc0 at isa? port 0x1f0 irq 14 flags 0x00 169wdc1 at isa? port 0x170 irq 15 flags 0x00 170#wdc* at isapnp? 171 172# ISA parallel printer interfaces 173lpt0 at isa? port 0x378 irq 7 174 175# ISA network interfaces 176ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet 177ep0 at isa? port ? irq ? # 3C509 ethernet cards 178ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards 179ne1 at isa? port 0x300 irq 10 180#ne* at isapnp? # NE[12]000 PnP ethernet 181we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet 182we1 at isa? port 0x300 iomem 0xcc000 irq 10 183 184#aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI 185#aha1 at isa? port 0x334 irq ? drq ? # Adaptec 154[02] SCSI 186btl0 at isa? port 0x330 irq ? drq ? 187#wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 SCSI 188#wds1 at isa? port 0x358 irq 11 drq 5 189 190# SCSI bus support 191scsibus* at scsi? 192 193#### SCSI bus devices 194 195sd* at scsibus? target ? lun ? 196st* at scsibus? target ? lun ? 197cd* at scsibus? target ? lun ? 198ch* at scsibus? target ? lun ? 199ss* at scsibus? target ? lun ? 200uk* at scsibus? target ? lun ? 201 202# ATA (IDE) bus support 203atabus* at ata? 204 205# IDE drives 206# Flags are used only with controllers that support DMA operations 207# and mode settings (e.g. some pciide controllers) 208# The lowest order four bits (rightmost digit) of the flags define the PIO 209# mode to use, the next set of four bits the DMA mode and the third set the 210# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 211# to use, and the last bit must be 1 for this setting to be used. 212# For DMA and UDMA, 0xf (1111) means 'disable'. 213# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 214# (0xc=1100, 0xa=1010, 0xf=1111) 215# 0x0000 means "use whatever the drive claims to support". 216wd* at atabus? drive ? flags 0x0000 217 218# ATAPI bus support 219atapibus* at atapi? 220 221#### ATAPI bus devices 222 223# flags have the same meaning as for IDE drives. 224cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 225sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 226uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 227 228#### Workstation Console attachments 229 230#wsdisplay* at vga? 231#wsdisplay* at tga? 232#pckbd* at pckbc? # PC keyboard (kbd port) 233#wskbd* at pckbd? 234#pms* at pckbc? # PS/2-style mouse (aux port) 235#wsmouse* at pms? 236 237#### Pseudo devices 238 239# disk/mass storage pseudo-devices 240pseudo-device ccd # concatenated/striped disk devices 241#pseudo-device raid # RAIDframe disk driver 242#pseudo-device fss # file system snapshot device 243pseudo-device md # memory disk device (ramdisk) 244pseudo-device vnd # disk-like interface to files 245 246# network pseudo-devices 247pseudo-device bpfilter # Berkeley packet filter 248pseudo-device ipfilter # IP filter (firewall) and NAT 249pseudo-device loop # network loopback 250pseudo-device ppp # Point-to-Point Protocol 251pseudo-device sl # Serial Line IP 252#pseudo-device strip # Starmode Radio IP (Metricom) 253pseudo-device tun # network tunneling over tty 254#pseudo-device gre # generic L3 over IP tunnel 255pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 256#pseudo-device faith # IPv[46] tcp relay translation i/f 257pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 258pseudo-device vlan # IEEE 802.1q encapsulation 259 260# miscellaneous pseudo-devices 261pseudo-device pty # pseudo-terminals 262#pseudo-device sequencer # MIDI sequencer 263# rnd works; RND_COM does not on port arc yet. 264#options RND_COM # use "com" randomness as well (BROKEN) 265pseudo-device clockctl # user control of clock subsystem 266 267# a pseudo device needed for Coda # also needs CODA (above) 268#pseudo-device vcoda # coda minicache <-> venus comm. 269 270# mouse & keyboard multiplexor pseudo-devices 271#pseudo-device wsmux 272