GENERIC revision 1.31
1 # $NetBSD: GENERIC,v 1.31 2000/06/09 05:33:02 soda Exp $ 2 # $OpenBSD: GENERIC,v 1.29 1999/08/29 12:14:03 niklas Exp $ 3 # 4 # GENERIC -- everything that's currently supported 5 # 6 7 include "arch/arc/conf/std.arc" 8 9 #ident "GENERIC-$Revision: 1.31 $" 10 11 maxusers 32 # estimated number of users 12 13 # Standard system options 14 15 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 16 options NTP # NTP phase/frequency locked loop 17 18 options KTRACE # system call tracing via ktrace(1) 19 20 options SYSVMSG # System V-like message queues 21 options SYSVSEM # System V-like semaphores 22 options SYSVSHM # System V-like memory sharing 23 #options SHMMAXPGS=1024 # 1024 pages is the default 24 25 options LKM # loadable kernel modules 26 27 # Diagnostic/debugging support options 28 options DIAGNOSTIC # cheap kernel consistency checks 29 #options DEBUG # expensive debugging checks/support 30 #options KMEMSTATS # kernel memory statistics (vmstat -m) 31 options DDB # in-kernel debugger 32 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 33 #options KGDB # remote gdb 34 #options KGDBRATE=19200 # kernel gdb port rate (default 9600) 35 #options KGDBDEV="17*256+0" # device for kernel gdb 36 #makeoptions DEBUG="-g" # compile full symbol table 37 38 # Compatibility options 39 options COMPAT_10 # NetBSD 1.0, 40 options COMPAT_11 # NetBSD 1.1, 41 options COMPAT_12 # NetBSD 1.2, 42 options COMPAT_13 # NetBSD 1.3, 43 options COMPAT_14 # NetBSD 1.4, 44 options COMPAT_43 # and 4.3BSD 45 options COMPAT_386BSD_MBRPART # recognize old partition ID 46 47 # mipsel specific 48 options COMPAT_ULTRIX # Ultrix binary compatibility 49 options EXEC_ECOFF # Ultrix RISC binaries are ECOFF format 50 51 # File systems 52 file-system FFS # fast filesystem 53 file-system EXT2FS # second extended file system (linux) 54 file-system LFS # log-structured file system 55 file-system MFS # memory file system 56 file-system NTFS # Windows/NT file system (experimental) 57 file-system CD9660 # ISO 9660 + Rock Ridge file system 58 file-system MSDOSFS # MS-DOS file system 59 file-system NFS # Network File System client 60 file-system FDESC # /dev/fd 61 file-system KERNFS # /kern 62 file-system NULLFS # loopback file system 63 file-system OVERLAY # overlay file system 64 file-system PORTAL # portal filesystem (still experimental) 65 file-system PROCFS # /proc 66 file-system UMAPFS # NULLFS + uid and gid remapping 67 file-system UNION # union file system 68 #file-system CODA # Coda File System; also needs vcoda (below) 69 70 # File system options 71 options QUOTA # FFS quotas 72 #options FFS_EI # FFS Endian Independent support 73 #options SOFTDEP # FFS soft updates support. 74 options NFSSERVER # Network File System server 75 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 76 # immutable) behave as system flags. 77 78 # Pull in config fragments for kernel crypto. This is required for 79 # options IPSEC etc. to work. If you want to run with IPSEC, uncomment 80 # one of these, based on whether you use crypto-us or crypto-intl, and 81 # adjust the prefixes as necessary. 82 83 #prefix ../crypto-us/sys 84 #cinclude "conf/files.crypto-us" 85 #prefix 86 87 #prefix ../crypto-intl/sys 88 #cinclude "conf/files.crypto-intl" 89 #prefix 90 91 # Networking options 92 #options GATEWAY # IP packet forwarding 93 options INET # IP + ICMP + TCP + UDP 94 options INET6 # IPV6 95 #options IPSEC # IP security 96 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 97 #options IPSEC_DEBUG # debug for IP security 98 #options MROUTING # IP multicast routing 99 options NS # XNS 100 #options NSIP # XNS tunneling over IP 101 options ISO,TPIP # OSI networking 102 options EON # OSI tunneling over IP 103 options CCITT,LLC,HDLC # X.25 104 options NETATALK # AppleTalk networking protocols 105 options PPP_BSDCOMP # BSD-Compress compression support for PPP 106 options PPP_DEFLATE # Deflate compression support for PPP 107 options PPP_FILTER # Active filter support for PPP (requires bpf) 108 options PFIL_HOOKS # pfil(9) packet filter hooks 109 options IPFILTER_LOG # ipmon(8) log support 110 111 # Compatibility with 4.2BSD implementation of TCP/IP. Not recommended. 112 #options TCP_COMPAT_42 113 114 # These options enable verbose messages for several subsystems. 115 # Warning, these may compile large string tables into the kernel! 116 #options EISAVERBOSE # verbose EISA device autoconfig messages 117 options PCIVERBOSE # verbose PCI device autoconfig messages 118 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 119 options SCSIVERBOSE # human readable SCSI error messages 120 121 # Kernel root file system and dump configuration. 122 options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM 123 config netbsd root on ? type ? 124 #config netbsd root on sd0a type ffs 125 #config netbsd root on ? type nfs 126 127 # 128 # Device configuration 129 # 130 131 mainbus0 at root 132 cpu* at mainbus0 133 134 #### Pica bus devices 135 136 pica* at mainbus0 # ACER Pica systems local bus. 137 aclock0 at pica? 138 pc0 at pica? 139 opms0 at pica? 140 com0 at pica? 141 com1 at pica? 142 lpt0 at pica? 143 sn0 at pica? 144 145 fdc0 at pica? 146 fd* at fdc? drive ? 147 148 asc0 at pica? 149 scsibus* at asc? 150 151 #### ISA bus devices 152 153 isabr* at mainbus0 # ISA Bus bridge (std ISA bus). 154 isa* at isabr? 155 #isadma0 at isa? 156 157 aclock0 at isa? port 0x70 irq 0 158 159 pc0 at isa? port 0x60 irq 1 # generic PC console device 160 com0 at isa? port 0x3f8 irq 4 161 com1 at isa? port 0x2f8 irq 3 162 com2 at isa? port 0x3e8 irq 4 163 com3 at isa? port 0x2e8 irq 3 164 ast0 at isa? port 0x1a0 irq 3 # AST 4-port serial cards 165 com* at ast? slave ? 166 167 # Joystick driver. Probe is a little strange; add only if you have one. 168 #joy0 at isa? port 0x201 169 170 # ISA ST506, ESDI, and IDE controllers 171 # Use flags 0x01 if you want to try to use 32bits data I/O (the driver will 172 # fall back to 16bits I/O if 32bits I/O are not functional). 173 # Some controllers pass the initial 32bit test, but will fail later. 174 # XXX - should be configured 175 #wdc0 at isa? port 0x1f0 irq 14 flags 0x00 176 #wdc1 at isa? port 0x170 irq 15 flags 0x00 177 #wdc* at isapnp? 178 179 # IDE drives 180 # Flags are used only with controllers that support DMA operations 181 # and mode settings (e.g. some pciide controllers) 182 # The lowest order four bits (rightmost digit) of the flags define the PIO 183 # mode to use, the next set of four bits the DMA mode and the third set the 184 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 185 # to use, and the last bit must be 1 for this setting to be used. 186 # For DMA and UDMA, 0xf (1111) means 'disable'. 187 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 188 # (0xc=1100, 0xa=1010, 0xf=1111) 189 # 0x0000 means "use whatever the drive claims to support". 190 # XXX - should be configured 191 #wd* at wdc? channel ? drive ? flags 0x0000 192 193 # ATAPI bus support 194 # XXX - should be configured 195 #atapibus* at wdc? channel ? 196 197 # ISA parallel printer interfaces 198 lpt0 at isa? port 0x378 irq 7 199 200 # ISA network interfaces 201 # XXX - should be configured 202 #ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet 203 #ep0 at isa? port ? irq ? # 3C509 ethernet cards 204 #ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards 205 #ne1 at isa? port 0x300 irq 10 206 #ne* at isapnp? # NE[12]000 PnP ethernet 207 #we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet 208 #we1 at isa? port 0x300 iomem 0xcc000 irq 10 209 #we* at isapnp? 210 211 # XXX - should be configured 212 #btl0 at isa? port 0x330 irq ? drq ? 213 #scsibus* at btl? 214 215 #### Algor bus devices 216 217 #algor* at mainbus0 # Algorithmics local bus. 218 219 #aclock0 at algor? 220 #com0 at algor? 221 #com1 at algor? 222 #lpt0 at algor? 223 224 #### PCI bus devices 225 226 necpb* at mainbus0 # NEC RISCstation PCI host bridge. 227 pci* at necpb? 228 229 #pbcpcibr* at mainbus0 # Algorithmics PCI bus bridge. 230 #pci* at pbcpcibr? 231 232 #pcivga* at pci? dev ? function ? 233 #siop* at pci? dev ? function ? 234 #scsibus* at siop? 235 #de* at pci? dev ? function ? 236 237 ex* at pci? dev ? function ? # 3Com 90x[B] 238 fxp* at pci? dev ? function ? # Intel EtherExpress PRO 239 le* at pci? dev ? function ? # PCnet-PCI 240 ne* at pci? dev ? function ? # NE2000-compatible 241 tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) 242 #options TLP_MATCH_21040 243 #options TLP_MATCH_21041 244 #options TLP_MATCH_21140 245 #options TLP_MATCH_21142 246 247 # IDE and related devices 248 # PCI IDE controllers - see pciide(4) for supported hardware. 249 # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know 250 # how to set up DMA modes for this chip. This may work, or may cause 251 # a machine hang with some controllers. 252 pciide* at pci ? dev ? function ? flags 0x0000 253 wd* at pciide? channel ? drive ? flags 0x0000 254 atapibus* at pciide? channel ? 255 256 tga* at pci? dev ? function ? # DEC ZLXp-E[123] Graphics 257 wsdisplay* at tga? 258 ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI 259 scsibus* at ahc? 260 261 #### MII/PHY support 262 263 exphy* at mii? phy ? # 3Com internal PHYs 264 icsphy* at mii? phy ? # Integrated Circuit Systems ICS1890 265 inphy* at mii? phy ? # Intel 82555 PHYs 266 iophy* at mii? phy ? # Intel 82553 PHYs 267 lxtphy* at mii? phy ? # Level One LXT-970 PHYs 268 nsphy* at mii? phy ? # NS83840 PHYs 269 nsphyter* at mii? phy ? # NS83843 PHYs 270 qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 271 sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs 272 tlphy* at mii? phy ? # ThunderLAN PHYs 273 tqphy* at mii? phy ? # TDK Semiconductor PHYs 274 ukphy* at mii? phy ? # generic unknown PHYs 275 276 #### SCSI bus devices 277 278 sd* at scsibus? target ? lun ? 279 st* at scsibus? target ? lun ? 280 cd* at scsibus? target ? lun ? 281 ch* at scsibus? target ? lun ? 282 ss* at scsibus? target ? lun ? 283 uk* at scsibus? target ? lun ? 284 285 #### ATAPI bus devices 286 287 # flags have the same meaning as for IDE drives. 288 cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 289 sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 290 uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 291 292 #### Pseudo devices 293 294 # disk/mass storage pseudo-devices 295 pseudo-device ccd 4 # concatenated/striped disk devices 296 #pseudo-device raid 4 # RAIDframe disk driver 297 pseudo-device md 1 # memory disk device (ramdisk) 298 pseudo-device vnd 4 # disk-like interface to files 299 300 # network pseudo-devices 301 pseudo-device bpfilter 8 # Berkeley packet filter 302 pseudo-device ipfilter # IP filter (firewall) and NAT 303 pseudo-device loop 1 # network loopback 304 pseudo-device ppp 2 # Point-to-Point Protocol 305 pseudo-device sl 2 # Serial Line IP 306 #pseudo-device strip 2 # Starmode Radio IP (Metricom) 307 pseudo-device tun 2 # network tunneling over tty 308 #pseudo-device gre 2 # generic L3 over IP tunnel 309 pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 310 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 311 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 312 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 313 314 # miscellaneous pseudo-devices 315 pseudo-device pty 64 # pseudo-terminals 316 pseudo-device tb 1 # tablet line discipline 317 #pseudo-device sequencer 1 # MIDI sequencer 318 # rnd works; RND_COM does not on port arc yet. 319 pseudo-device rnd # /dev/random and in-kernel generator 320 #options RND_COM # use "com" randomness as well (BROKEN) 321 322 # a pseudo device needed for Coda # also needs CODA (above) 323 #pseudo-device vcoda 4 # coda minicache <-> venus comm. 324 325 # mouse & keyboard multiplexor pseudo-devices 326 #pseudo-device wsmux 2 327
Indexes created Mon Oct 26 00:26:21 UTC 2026