PCCONS revision 1.2
1# $NetBSD: PCCONS,v 1.2 2000/07/05 04:07:25 sommerfeld Exp $ 2# $OpenBSD: GENERIC,v 1.29 1999/08/29 12:14:03 niklas Exp $ 3# 4# PCCONS -- generic but pccons rather than wscons 5# 6 7include "arch/arc/conf/std.arc" 8 9maxusers 32 # estimated number of users 10 11# Standard system options 12 13options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 14options NTP # NTP phase/frequency locked loop 15 16options KTRACE # system call tracing via ktrace(1) 17 18options SYSVMSG # System V-like message queues 19options SYSVSEM # System V-like semaphores 20options SYSVSHM # System V-like memory sharing 21#options SHMMAXPGS=1024 # 1024 pages is the default 22 23options LKM # loadable kernel modules 24 25# Diagnostic/debugging support options 26options DIAGNOSTIC # cheap kernel consistency checks 27#options DEBUG # expensive debugging checks/support 28#options KMEMSTATS # kernel memory statistics (vmstat -m) 29options DDB # in-kernel debugger 30#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 31#options KGDB # remote gdb 32#options KGDBRATE=19200 # kernel gdb port rate (default 9600) 33#options KGDBDEV="17*256+0" # device for kernel gdb 34#makeoptions DEBUG="-g" # compile full symbol table 35 36# Compatibility options 37options COMPAT_10 # NetBSD 1.0, 38options COMPAT_11 # NetBSD 1.1, 39options COMPAT_12 # NetBSD 1.2, 40options COMPAT_13 # NetBSD 1.3, 41options COMPAT_14 # NetBSD 1.4, 42options COMPAT_43 # and 4.3BSD 43options COMPAT_386BSD_MBRPART # recognize old partition ID 44 45# mipsel specific 46options COMPAT_ULTRIX # Ultrix binary compatibility 47options EXEC_ECOFF # Ultrix RISC binaries are ECOFF format 48 49# File systems 50file-system FFS # fast filesystem 51file-system EXT2FS # second extended file system (linux) 52file-system LFS # log-structured file system 53file-system MFS # memory file system 54file-system NTFS # Windows/NT file system (experimental) 55file-system CD9660 # ISO 9660 + Rock Ridge file system 56file-system MSDOSFS # MS-DOS file system 57file-system NFS # Network File System client 58file-system FDESC # /dev/fd 59file-system KERNFS # /kern 60file-system NULLFS # loopback file system 61file-system OVERLAY # overlay file system 62file-system PORTAL # portal filesystem (still experimental) 63file-system PROCFS # /proc 64file-system UMAPFS # NULLFS + uid and gid remapping 65file-system UNION # union file system 66#file-system CODA # Coda File System; also needs vcoda (below) 67 68# File system options 69options QUOTA # FFS quotas 70#options FFS_EI # FFS Endian Independent support 71#options SOFTDEP # FFS soft updates support. 72options NFSSERVER # Network File System server 73#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 74 # immutable) behave as system flags. 75 76# Networking options 77#options GATEWAY # IP packet forwarding 78options INET # IP + ICMP + TCP + UDP 79options INET6 # IPV6 80#options IPSEC # IP security 81#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 82#options IPSEC_DEBUG # debug for IP security 83#options MROUTING # IP multicast routing 84options NS # XNS 85#options NSIP # XNS tunneling over IP 86options ISO,TPIP # OSI networking 87#options EON # OSI tunneling over IP 88options CCITT,LLC,HDLC # X.25 89options NETATALK # AppleTalk networking protocols 90options PPP_BSDCOMP # BSD-Compress compression support for PPP 91options PPP_DEFLATE # Deflate compression support for PPP 92options PPP_FILTER # Active filter support for PPP (requires bpf) 93options PFIL_HOOKS # pfil(9) packet filter hooks 94options IPFILTER_LOG # ipmon(8) log support 95 96# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended. 97#options TCP_COMPAT_42 98 99# These options enable verbose messages for several subsystems. 100# Warning, these may compile large string tables into the kernel! 101#options EISAVERBOSE # verbose EISA device autoconfig messages 102options PCIVERBOSE # verbose PCI device autoconfig messages 103#options PCI_CONFIG_DUMP # verbosely dump PCI config space 104options SCSIVERBOSE # human readable SCSI error messages 105 106# Kernel root file system and dump configuration. 107options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM 108config netbsd root on ? type ? 109#config netbsd root on sd0a type ffs 110#config netbsd root on ? type nfs 111 112# 113# Device configuration 114# 115 116mainbus0 at root 117cpu* at mainbus0 118 119#### Pica bus devices 120 121pica* at mainbus0 # ACER Pica systems local bus. 122aclock0 at pica? 123pc0 at pica? 124opms0 at pica? 125com0 at pica? 126com1 at pica? 127lpt0 at pica? 128sn0 at pica? 129 130fdc0 at pica? 131fd* at fdc? drive ? 132 133asc0 at pica? 134scsibus* at asc? 135 136#siop0 at pica? 137#scsibus* at siop? 138 139#### ISA bus devices 140 141isabr* at mainbus0 # ISA Bus bridge (std ISA bus). 142isa* at isabr? 143#isadma0 at isa? 144 145aclock0 at isa? port 0x70 irq 0 146 147pc0 at isa? port 0x60 irq 1 # generic PC console device 148com0 at isa? port 0x3f8 irq 4 149com1 at isa? port 0x2f8 irq 3 150com2 at isa? port 0x3e8 irq 4 151com3 at isa? port 0x2e8 irq 3 152ast0 at isa? port 0x1a0 irq 3 # AST 4-port serial cards 153com* at ast? slave ? 154 155# Joystick driver. Probe is a little strange; add only if you have one. 156#joy0 at isa? port 0x201 157 158# ISA ST506, ESDI, and IDE controllers 159# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will 160# fall back to 16bits I/O if 32bits I/O are not functional). 161# Some controllers pass the initial 32bit test, but will fail later. 162# XXX - should be configured 163#wdc0 at isa? port 0x1f0 irq 14 flags 0x00 164#wdc1 at isa? port 0x170 irq 15 flags 0x00 165#wdc* at isapnp? 166 167# IDE drives 168# Flags are used only with controllers that support DMA operations 169# and mode settings (e.g. some pciide controllers) 170# The lowest order four bits (rightmost digit) of the flags define the PIO 171# mode to use, the next set of four bits the DMA mode and the third set the 172# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 173# to use, and the last bit must be 1 for this setting to be used. 174# For DMA and UDMA, 0xf (1111) means 'disable'. 175# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 176# (0xc=1100, 0xa=1010, 0xf=1111) 177# 0x0000 means "use whatever the drive claims to support". 178# XXX - should be configured 179#wd* at wdc? channel ? drive ? flags 0x0000 180 181# ATAPI bus support 182# XXX - should be configured 183#atapibus* at wdc? channel ? 184 185# ISA parallel printer interfaces 186lpt0 at isa? port 0x378 irq 7 187 188# ISA network interfaces 189# XXX - should be configured 190#ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet 191#ep0 at isa? port ? irq ? # 3C509 ethernet cards 192#ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards 193#ne1 at isa? port 0x300 irq 10 194#ne* at isapnp? # NE[12]000 PnP ethernet 195#we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet 196#we1 at isa? port 0x300 iomem 0xcc000 irq 10 197#we* at isapnp? 198 199# XXX - should be configured 200#btl0 at isa? port 0x330 irq ? drq ? 201#scsibus* at btl? 202 203#### Algor bus devices 204 205#algor* at mainbus0 # Algorithmics local bus. 206 207#aclock0 at algor? 208#com0 at algor? 209#com1 at algor? 210#lpt0 at algor? 211 212#### PCI bus devices 213 214necpb* at mainbus0 # NEC RISCstation PCI host bridge. 215pci* at necpb? 216 217#pbcpcibr* at mainbus0 # Algorithmics PCI bus bridge. 218#pci* at pbcpcibr? 219 220#pcivga* at pci? dev ? function ? 221#siop* at pci? dev ? function ? 222#scsibus* at siop? 223#de* at pci? dev ? function ? 224 225ex* at pci? dev ? function ? # 3Com 90x[B] 226fxp* at pci? dev ? function ? # Intel EtherExpress PRO 227le* at pci? dev ? function ? # PCnet-PCI 228ne* at pci? dev ? function ? # NE2000-compatible 229tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) 230#options TLP_MATCH_21040 231#options TLP_MATCH_21041 232#options TLP_MATCH_21140 233#options TLP_MATCH_21142 234 235# IDE and related devices 236# PCI IDE controllers - see pciide(4) for supported hardware. 237# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know 238# how to set up DMA modes for this chip. This may work, or may cause 239# a machine hang with some controllers. 240pciide* at pci ? dev ? function ? flags 0x0000 241wd* at pciide? channel ? drive ? flags 0x0000 242atapibus* at pciide? channel ? 243 244tga* at pci? dev ? function ? # DEC ZLXp-E[123] Graphics 245wsdisplay* at tga? 246ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI 247scsibus* at ahc? 248 249#### MII/PHY support 250 251exphy* at mii? phy ? # 3Com internal PHYs 252icsphy* at mii? phy ? # Integrated Circuit Systems ICS1890 253inphy* at mii? phy ? # Intel 82555 PHYs 254iophy* at mii? phy ? # Intel 82553 PHYs 255lxtphy* at mii? phy ? # Level One LXT-970 PHYs 256nsphy* at mii? phy ? # NS83840 PHYs 257nsphyter* at mii? phy ? # NS83843 PHYs 258qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 259sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs 260tlphy* at mii? phy ? # ThunderLAN PHYs 261tqphy* at mii? phy ? # TDK Semiconductor PHYs 262ukphy* at mii? phy ? # generic unknown PHYs 263 264#### SCSI bus devices 265 266sd* at scsibus? target ? lun ? 267st* at scsibus? target ? lun ? 268cd* at scsibus? target ? lun ? 269ch* at scsibus? target ? lun ? 270ss* at scsibus? target ? lun ? 271uk* at scsibus? target ? lun ? 272 273#### ATAPI bus devices 274 275# flags have the same meaning as for IDE drives. 276cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 277sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 278uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 279 280#### Pseudo devices 281 282# disk/mass storage pseudo-devices 283pseudo-device ccd 4 # concatenated/striped disk devices 284#pseudo-device raid 4 # RAIDframe disk driver 285pseudo-device md 1 # memory disk device (ramdisk) 286pseudo-device vnd 4 # disk-like interface to files 287 288# network pseudo-devices 289pseudo-device bpfilter 8 # Berkeley packet filter 290pseudo-device ipfilter # IP filter (firewall) and NAT 291pseudo-device loop 1 # network loopback 292pseudo-device ppp 2 # Point-to-Point Protocol 293pseudo-device sl 2 # Serial Line IP 294#pseudo-device strip 2 # Starmode Radio IP (Metricom) 295pseudo-device tun 2 # network tunneling over tty 296#pseudo-device gre 2 # generic L3 over IP tunnel 297pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003) 298pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 299#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 300#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 301 302# miscellaneous pseudo-devices 303pseudo-device pty 64 # pseudo-terminals 304pseudo-device tb 1 # tablet line discipline 305#pseudo-device sequencer 1 # MIDI sequencer 306# rnd works; RND_COM does not on port arc yet. 307pseudo-device rnd # /dev/random and in-kernel generator 308#options RND_COM # use "com" randomness as well (BROKEN) 309 310# a pseudo device needed for Coda # also needs CODA (above) 311#pseudo-device vcoda 4 # coda minicache <-> venus comm. 312 313# mouse & keyboard multiplexor pseudo-devices 314#pseudo-device wsmux 2 315