RAMDISK revision 1.42
1#	$NetBSD: RAMDISK,v 1.42 2003/10/08 11:04:56 bouyer Exp $
2#
3#	memory disk based configuration file for MIPS R4x00 ARC Systems
4#
5
6include		"arch/arc/conf/std.arc"
7
8#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
9
10#ident		"GENERIC-$Revision: 1.42 $"
11
12maxusers	32		# estimated number of users
13
14# Platform support
15options 	PLATFORM_ACER_PICA_61		# PICA, NEC ImageRISCstation
16options 	PLATFORM_DESKTECH_ARCSTATION_I	# DeskStation rPC44
17options 	PLATFORM_DESKTECH_TYNE		# DeskStation Tyne
18options 	PLATFORM_MICROSOFT_JAZZ		# MIPS Magnum
19options 	PLATFORM_NEC_J96A		# NEC Express 5800/240 EISA R4K
20options 	PLATFORM_NEC_JC94		# NEC Express 5800/230 PCI R4K
21options 	PLATFORM_NEC_R94		# NEC RISCstation 2200 EISA
22options 	PLATFORM_NEC_R96	# NEC Express RISCserver, RISCserver 2200
23options 	PLATFORM_NEC_RAX94		# NEC RISCstation 2200 PCI
24options 	PLATFORM_NEC_RD94		# NEC RISCstation 2250
25options 	PLATFORM_SNI_RM200PCI
26
27# Standard system options
28
29options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
30#options 	NTP		# NTP phase/frequency locked loop
31
32#options 	KTRACE		# system call tracing via ktrace(1)
33#options 	SYSTRACE	# system call vetting via systrace(1)
34
35#options 	SYSVMSG		# System V-like message queues
36#options 	SYSVSEM		# System V-like semaphores
37#options 	SEMMNI=10	# number of semaphore identifiers
38#options 	SEMMNS=60	# number of semaphores in system
39#options 	SEMUME=10	# max number of undo entries per process
40#options 	SEMMNU=30	# number of undo structures in system
41#options 	SYSVSHM		# System V-like memory sharing
42#options 	SHMMAXPGS=1024	# 1024 pages is the default
43
44options 	LKM		# loadable kernel modules
45
46options 	USERCONF	# userconf(4) support
47options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
48
49# Enable experimental buffer queue strategy for better responsiveness under 
50# high disk I/O load. Use it with caution - it's not proven to be stable yet.
51#options 	NEW_BUFQ_STRATEGY
52
53# Diagnostic/debugging support options
54#options 	DIAGNOSTIC		# cheap kernel consistency checks
55#options 	DEBUG			# expensive debugging checks/support
56#options 	KMEMSTATS		# kernel memory statistics (vmstat -m)
57options 	DDB			# in-kernel debugger
58#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
59#options 	KGDB			# remote gdb
60#options 	KGDB_DEVRATE=19200	# kernel gdb port rate (default 9600)
61#options 	KGDB_DEV="17*256+0"	# device for kernel gdb
62#makeoptions	DEBUG="-g"		# compile full symbol table
63options 	SYMTAB_SPACE=262144
64
65# Compatibility options
66#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
67#options 	COMPAT_10	# NetBSD 1.0,
68#options 	COMPAT_11	# NetBSD 1.1,
69#options 	COMPAT_12	# NetBSD 1.2,
70options 	COMPAT_13	# NetBSD 1.3,
71options 	COMPAT_14	# NetBSD 1.4,
72options 	COMPAT_16	# NetBSD 1.6,
73options 	COMPAT_43	# and 4.3BSD
74options 	COMPAT_386BSD_MBRPART # recognize old partition ID
75
76# mipsel specific
77#options 	COMPAT_ULTRIX	# Ultrix binary compatibility
78#options 	EXEC_ECOFF	# Ultrix RISC binaries are ECOFF format
79
80# File systems
81file-system 	FFS		# fast filesystem
82#file-system 	EXT2FS		# second extended file system (linux)
83#file-system 	LFS		# log-structured file system
84file-system 	MFS		# memory file system
85file-system 	NTFS		# Windows/NT file system (experimental)
86file-system 	CD9660		# ISO 9660 + Rock Ridge file system
87file-system 	MSDOSFS		# MS-DOS file system
88file-system 	NFS		# Network File System client
89file-system 	FDESC		# /dev/fd
90file-system 	KERNFS		# /kern
91file-system 	NULLFS		# loopback file system
92#file-system 	OVERLAY		# overlay file system
93#file-system 	PORTAL		# portal filesystem (still experimental)
94file-system 	PROCFS		# /proc
95#file-system 	UMAPFS		# NULLFS + uid and gid remapping
96#file-system 	UNION		# union file system
97#file-system	CODA		# Coda File System; also needs vcoda (below)
98
99# File system options
100#options 	QUOTA		# FFS quotas
101#options 	FFS_EI		# FFS Endian Independent support
102#options 	SOFTDEP		# FFS soft updates support.
103#options 	NFSSERVER	# Network File System server
104#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
105				# immutable) behave as system flags.
106
107# Networking options
108#options 	GATEWAY		# IP packet forwarding
109options 	INET		# IP + ICMP + TCP + UDP
110options 	INET6		# IPV6
111#options 	IPSEC		# IP security
112#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
113#options 	IPSEC_DEBUG	# debug for IP security
114#options 	MROUTING	# IP multicast routing
115#options 	NS		# XNS
116#options 	NSIP		# XNS tunneling over IP
117#options 	ISO,TPIP	# OSI networking
118#options 	EON		# OSI tunneling over IP
119#options 	CCITT,LLC,HDLC	# X.25
120#options 	NETATALK	# AppleTalk networking protocols
121#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
122#options 	PPP_DEFLATE	# Deflate compression support for PPP
123#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
124#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
125#options 	IPFILTER_LOG	# ipmon(8) log support
126#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
127#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
128
129# These options enable verbose messages for several subsystems.
130# Warning, these may compile large string tables into the kernel!
131#options 	EISAVERBOSE	# verbose EISA device autoconfig messages
132#options 	MIIVERBOSE	# verbose PHY autoconfig messages
133#options 	PCIVERBOSE	# verbose PCI device autoconfig messages
134#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
135#options 	SCSIVERBOSE	# human readable SCSI error messages
136
137# wscons terminal emulation
138options 	WSEMUL_VT100	# VT100 emulation
139
140# Enable the hooks used for initializing the root memory-disk.
141options 	MEMORY_DISK_HOOKS
142options 	MEMORY_DISK_IS_ROOT		# force root on memory disk
143options 	MEMORY_DISK_SERVER=0		# no userspace md(4) support
144options 	MEMORY_DISK_ROOT_SIZE=5120	# size of memory disk, in blocks
145
146makeoptions	COPTS="-Os -mmemcpy"	# generates smaller code than -O2, -O1
147
148# Kernel root file system and dump configuration.
149options 	NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
150config		netbsd	root on ? type ?
151#config		netbsd	root on sd0a type ffs
152#config		netbsd	root on ? type nfs
153
154#
155# Device configuration
156#
157
158mainbus0	at root
159cpu*		at mainbus0
160
161#### Jazz-Internal bus devices
162
163# PLATFORM_ACER_PICA_61
164# PLATFORM_MICROSOFT_JAZZ
165# PLATFORM_NEC_J96A
166# PLATFORM_NEC_JC94
167# PLATFORM_NEC_R94
168# PLATFORM_NEC_R96
169# PLATFORM_NEC_RAX94
170# PLATFORM_NEC_RD94
171jazzio*		at mainbus0	# Jazz-Internal bus host bridge.
172
173timer0		at jazzio?
174mcclock0 	at jazzio?
175#pc0		at jazzio?
176#opms0		at jazzio?
177vga0		at jazzio?	# Jazz localbus VGA
178pckbc0		at jazzio?	# PC keyboard controller
179com0		at jazzio?
180com1		at jazzio?
181lpt0		at jazzio?
182sn0		at jazzio?
183
184fdc0		at jazzio?
185fd*		at fdc? drive ?
186
187asc0		at jazzio? flags 0x000000	# NCR53C9x SCSI
188scsibus* 	at asc?
189
190osiop*		at jazzio? flags 0x00000	# NCR53C710 SCSI
191scsibus* 	at osiop?
192
193oosiop* 	at jazzio?
194scsibus* 	at oosiop?
195
196#### ISA bus devices
197
198# PLATFORM_ACER_PICA_61
199# PLATFORM_MICROSOFT_JAZZ
200# PLATFORM_NEC_J96A
201# PLATFORM_NEC_R94
202# PLATFORM_NEC_R96
203jazzisabr*	at mainbus0	# Jazz-(E)ISA bus bridge.
204isa*		at jazzisabr?
205
206# PLATFORM_DESKTECH_ARCSTATION_I
207arcsisabr*	at mainbus0	# DeskStation rPC44 ISA host bridge.
208isa*		at arcsisabr?
209
210# PLATFORM_DESKTECH_TYNE
211tyneisabr*	at mainbus0	# DeskStation Tyne ISA host bridge.
212isa*		at tyneisabr?
213
214#isadma0 	at isa?
215
216isapnp0 	at isa?
217
218timer0		at isa? port 0x40 irq 0
219mcclock0 	at isa? port 0x70
220
221#pc0		at isa? irq 1			# generic PC console device
222#opms0		at isa? irq 12			# PS/2 auxiliary port mouse
223vga0		at isa?
224#options 	VGA_RASTERCONSOLE
225options 	VGA_RESET
226pckbc0		at isa?				# PC keyboard controller
227com0		at isa? port 0x3f8 irq 4
228com1		at isa? port 0x2f8 irq 3
229com2		at isa? port 0x3e8 irq 4
230com3		at isa? port 0x2e8 irq 3
231ast0		at isa? port 0x1a0 irq 3	# AST 4-port serial cards
232com*		at ast? slave ?
233
234# Joystick driver. Probe is a little strange; add only if you have one.
235#joy0		at isa? port 0x201
236
237# ISA ST506, ESDI, and IDE controllers
238# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
239# fall back to 16bits I/O if 32bits I/O are not functional).
240# Some controllers pass the initial 32bit test, but will fail later.
241wdc0		at isa? port 0x1f0 irq 14 flags 0x00
242#wdc1		at isa? port 0x170 irq 15 flags 0x00
243wdc*		at isapnp?
244atabus* 	at wdc? channel ?
245
246# IDE drives
247# Flags are used only with controllers that support DMA operations
248# and mode settings (e.g. some pciide controllers)
249# The lowest order four bits (rightmost digit) of the flags define the PIO
250# mode to use, the next set of four bits the DMA mode and the third set the
251# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
252# to use, and the last bit must be 1 for this setting to be used.
253# For DMA and UDMA, 0xf (1111) means 'disable'.
254# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
255# (0xc=1100, 0xa=1010, 0xf=1111)
256# 0x0000 means "use whatever the drive claims to support".
257wd*		at atabus? drive ? flags 0x0000
258
259# ATAPI bus support
260atapibus*	at atabus?
261
262# ISA parallel printer interfaces
263lpt0		at isa? port 0x378 irq 7
264
265# ISA network interfaces
266#ec0		at isa? port 0x250 iomem 0xd8000 irq 9	# 3Com 3c503 Ethernet
267ep*		at isa? port ? irq ?		# 3C509 ethernet cards
268ep*		at isapnp?			# 3C509B ethernet card
269ne0		at isa? port 0x280 irq 9	# NE[12]000 ethernet cards
270ne1		at isa? port 0x300 irq 10
271ne*		at isapnp?			# NE[12]000 PnP ethernet
272we0		at isa? port 0x280 iomem 0xd0000 irq 9	# WD/SMC Ethernet
273we1		at isa? port 0x300 iomem 0xcc000 irq 10
274
275# XXX - should be configured
276#btl0		at isa? port 0x330 irq ? drq ?
277#scsibus*	at btl?
278
279#### PCI bus devices
280
281# PLATFORM_NEC_JC94
282# PLATFORM_NEC_RAX94
283# PLATFORM_NEC_RD94
284necpb*		at mainbus0	# NEC RISCstation PCI host bridge.
285pci*		at necpb?
286
287#vga*	 	at pci? dev ? function ?
288tga*		at pci? dev ? function ?	# DEC ZLXp-E[123] Graphics
289
290ahc*		at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
291scsibus*	at ahc?
292
293iha*		at pci? dev ? function ?	# Initio INIC-940/950 SCSI
294scsibus*	at iha?
295
296pcscp*		at pci? dev ? function ?	# AMD Am53c974 PCscsi-PCI SCSI
297scsibus* 	at pcscp?
298
299siop*		at pci? dev ? function ?	# NCR/Symbios 53c8xx SCSI
300scsibus* 	at siop?
301
302trm*		at pci? dev ? function ?	# Tekram DC-395/315 SCSI
303scsibus*	at trm?
304
305epic*		at pci? dev ? function ?	# SMC EPIC/100 Ethernet
306ex*		at pci? dev ? function ?	# 3Com 90x[BC]
307fxp*		at pci? dev ? function ?	# Intel EtherExpress PRO
308ne*		at pci? dev ? function ?	# NE2000-compatible
309pcn*		at pci? dev ? function ?	# AMD PCnet-PCI Ethernet
310rtk*		at pci? dev ? function ?	# Realtek 8129/8139
311sip*		at pci? dev ? function ?	# SiS 900/DP83815 Ethernet
312tlp*		at pci? dev ? function ?	# DECchip 21x4x and clones
313
314# IDE and related devices
315# PCI IDE controllers - see pciide(4) for supported hardware.
316# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
317# how to set up DMA modes for this chip. This may work, or may cause
318# a machine hang with some controllers.
319pciide*		at pci ? dev ? function ? flags 0x0000
320atabus* 	at pciide? channel ?
321
322#### MII/PHY support
323
324exphy*		at mii? phy ?		# 3Com internal PHYs
325icsphy*		at mii? phy ?		# Integrated Circuit Systems ICS189x
326inphy*		at mii? phy ?		# Intel 82555 PHYs
327iophy*		at mii? phy ?		# Intel 82553 PHYs
328lxtphy*		at mii? phy ?		# Level One LXT-970 PHYs
329nsphy*		at mii? phy ?		# NS83840 PHYs
330nsphyter*	at mii? phy ?		# NS83843 PHYs
331qsphy*		at mii? phy ?		# Quality Semiconductor QS6612 PHYs
332sqphy*		at mii? phy ?		# Seeq 80220/80221/80223 PHYs
333tlphy*		at mii? phy ?		# ThunderLAN PHYs
334tqphy*		at mii? phy ?		# TDK Semiconductor PHYs
335ukphy*		at mii? phy ?		# generic unknown PHYs
336
337#### SCSI bus devices
338
339sd*		at scsibus? target ? lun ?
340st*		at scsibus? target ? lun ?
341cd*		at scsibus? target ? lun ?
342ch*		at scsibus? target ? lun ?
343ss*		at scsibus? target ? lun ?
344uk*		at scsibus? target ? lun ?
345
346#### ATAPI bus devices
347
348# flags have the same meaning as for IDE drives.
349cd*		at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
350sd*		at atapibus? drive ? flags 0x0000	# ATAPI disk drives
351uk*		at atapibus? drive ? flags 0x0000	# ATAPI unknown
352
353#### Workstation Console attachments
354
355wsdisplay*	at vga?
356wsdisplay*	at tga?
357pckbd*		at pckbc?	# PC keyboard (kbd port)
358wskbd*		at pckbd?
359pms*		at pckbc?	# PS/2-style mouse (aux port)
360wsmouse*	at pms?
361
362#### Pseudo devices
363
364# disk/mass storage pseudo-devices
365#pseudo-device	ccd		4	# concatenated/striped disk devices
366#pseudo-device	cgd		4	# cryptographic disk devices
367#pseudo-device	raid		8	# RAIDframe disk driver
368# Options to enable various other RAIDframe RAID types.
369# options	RF_INCLUDE_EVENODD=1
370# options	RF_INCLUDE_RAID5_RS=1
371# options	RF_INCLUDE_PARITYLOGGING=1
372# options	RF_INCLUDE_CHAINDECLUSTER=1
373# options	RF_INCLUDE_INTERDECLUSTER=1
374# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
375# options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
376pseudo-device	md		1	# memory disk device (ramdisk)
377#pseudo-device	vnd		4	# disk-like interface to files
378
379# network pseudo-devices
380pseudo-device	bpfilter	8	# Berkeley packet filter
381#pseudo-device	ipfilter		# IP filter (firewall) and NAT
382pseudo-device	loop		1	# network loopback
383pseudo-device	ppp		2	# Point-to-Point Protocol
384#pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
385pseudo-device	sl		2	# Serial Line IP
386#pseudo-device	strip		2	# Starmode Radio IP (Metricom)
387#pseudo-device	tun		2	# network tunneling over tty
388#pseudo-device	gre		2	# generic L3 over IP tunnel
389#pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
390#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
391#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
392#pseudo-device	vlan			# IEEE 802.1q encapsulation
393#pseudo-device	bridge			# simple inter-network bridging
394
395# miscellaneous pseudo-devices
396pseudo-device	pty		2	# pseudo-terminals
397#pseudo-device	tb		1	# tablet line discipline
398#pseudo-device	sequencer	1	# MIDI sequencer
399# rnd works; RND_COM does not on port arc yet.
400pseudo-device	rnd			# /dev/random and in-kernel generator
401#options 	RND_COM			# use "com" randomness as well (BROKEN)
402pseudo-device	clockctl		# user control of clock subsystem
403
404# a pseudo device needed for Coda	# also needs CODA (above)
405#pseudo-device	vcoda		4	# coda minicache <-> venus comm.
406
407# mouse & keyboard multiplexor pseudo-devices
408#pseudo-device	wsmux
409