RAMDISK revision 1.50
1#	$NetBSD: RAMDISK,v 1.50 2004/11/10 17:54:03 christos Exp $
2#
3#	memory disk based configuration file for MIPS R4x00 ARC Systems
4#
5
6include		"arch/arc/conf/std.arc"
7
8#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
9
10#ident		"GENERIC-$Revision: 1.50 $"
11
12maxusers	32		# estimated number of users
13
14# Platform support
15options 	PLATFORM_ACER_PICA_61		# PICA, NEC ImageRISCstation
16options 	PLATFORM_DESKTECH_ARCSTATION_I	# DeskStation rPC44
17options 	PLATFORM_DESKTECH_TYNE		# DeskStation Tyne
18options 	PLATFORM_MICROSOFT_JAZZ		# MIPS Magnum
19options 	PLATFORM_NEC_J96A		# NEC Express 5800/240 EISA R4K
20options 	PLATFORM_NEC_JC94		# NEC Express 5800/230 PCI R4K
21options 	PLATFORM_NEC_R94		# NEC RISCstation 2200 EISA
22options 	PLATFORM_NEC_R96	# NEC Express RISCserver, RISCserver 2200
23options 	PLATFORM_NEC_RAX94		# NEC RISCstation 2200 PCI
24options 	PLATFORM_NEC_RD94		# NEC RISCstation 2250
25options 	PLATFORM_SNI_RM200PCI
26
27# Standard system options
28
29options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
30#options 	NTP		# NTP phase/frequency locked loop
31
32#options 	KTRACE		# system call tracing via ktrace(1)
33#options 	SYSTRACE	# system call vetting via systrace(1)
34
35#options 	SYSVMSG		# System V-like message queues
36#options 	SYSVSEM		# System V-like semaphores
37#options 	SEMMNI=10	# number of semaphore identifiers
38#options 	SEMMNS=60	# number of semaphores in system
39#options 	SEMUME=10	# max number of undo entries per process
40#options 	SEMMNU=30	# number of undo structures in system
41#options 	SYSVSHM		# System V-like memory sharing
42#options 	SHMMAXPGS=1024	# 1024 pages is the default
43
44options 	LKM		# loadable kernel modules
45
46options 	USERCONF	# userconf(4) support
47options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
48#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
49
50# Enable experimental buffer queue strategy for better responsiveness under 
51# high disk I/O load. Use it with caution - it's not proven to be stable yet.
52#options 	NEW_BUFQ_STRATEGY
53
54# Diagnostic/debugging support options
55#options 	DIAGNOSTIC		# cheap kernel consistency checks
56#options 	DEBUG			# expensive debugging checks/support
57#options 	KMEMSTATS		# kernel memory statistics (vmstat -m)
58options 	DDB			# in-kernel debugger
59#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
60#options 	KGDB			# remote gdb
61#options 	KGDB_DEVRATE=19200	# kernel gdb port rate (default 9600)
62#options 	KGDB_DEV="17*256+0"	# device for kernel gdb
63#makeoptions	DEBUG="-g"		# compile full symbol table
64options 	SYMTAB_SPACE=262144
65
66# Compatibility options
67#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
68#options 	COMPAT_10	# NetBSD 1.0,
69#options 	COMPAT_11	# NetBSD 1.1,
70#options 	COMPAT_12	# NetBSD 1.2,
71options 	COMPAT_13	# NetBSD 1.3,
72options 	COMPAT_14	# NetBSD 1.4,
73options 	COMPAT_16	# NetBSD 1.6,
74options 	COMPAT_43	# and 4.3BSD
75options 	COMPAT_386BSD_MBRPART # recognize old partition ID
76
77# mipsel specific
78#options 	COMPAT_ULTRIX	# Ultrix binary compatibility
79#options 	EXEC_ECOFF	# Ultrix RISC binaries are ECOFF format
80options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
81
82# File systems
83file-system 	FFS		# fast filesystem
84#file-system 	EXT2FS		# second extended file system (linux)
85#file-system 	LFS		# log-structured file system
86file-system 	MFS		# memory file system
87file-system 	NTFS		# Windows/NT file system (experimental)
88file-system 	CD9660		# ISO 9660 + Rock Ridge file system
89file-system 	MSDOSFS		# MS-DOS file system
90file-system 	NFS		# Network File System client
91file-system 	FDESC		# /dev/fd
92file-system 	KERNFS		# /kern
93file-system 	NULLFS		# loopback file system
94#file-system 	OVERLAY		# overlay file system
95#file-system 	PORTAL		# portal filesystem (still experimental)
96file-system 	PROCFS		# /proc
97#file-system 	UMAPFS		# NULLFS + uid and gid remapping
98#file-system 	UNION		# union file system
99#file-system	CODA		# Coda File System; also needs vcoda (below)
100
101# File system options
102#options 	QUOTA		# FFS quotas
103#options 	FFS_EI		# FFS Endian Independent support
104#options 	SOFTDEP		# FFS soft updates support.
105#options 	NFSSERVER	# Network File System server
106#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
107				# immutable) behave as system flags.
108
109# Networking options
110#options 	GATEWAY		# IP packet forwarding
111options 	INET		# IP + ICMP + TCP + UDP
112options 	INET6		# IPV6
113#options 	IPSEC		# IP security
114#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
115#options 	IPSEC_DEBUG	# debug for IP security
116#options 	MROUTING	# IP multicast routing
117#options 	PIM		# Protocol Independent Multicast
118#options 	NS		# XNS
119#options 	NSIP		# XNS tunneling over IP
120#options 	ISO,TPIP	# OSI networking
121#options 	EON		# OSI tunneling over IP
122#options 	CCITT,LLC,HDLC	# X.25
123#options 	NETATALK	# AppleTalk networking protocols
124#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
125#options 	PPP_DEFLATE	# Deflate compression support for PPP
126#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
127#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
128#options 	IPFILTER_LOG	# ipmon(8) log support
129#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
130#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
131
132# These options enable verbose messages for several subsystems.
133# Warning, these may compile large string tables into the kernel!
134#options 	EISAVERBOSE	# verbose EISA device autoconfig messages
135#options 	MIIVERBOSE	# verbose PHY autoconfig messages
136#options 	PCIVERBOSE	# verbose PCI device autoconfig messages
137#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
138#options 	SCSIVERBOSE	# human readable SCSI error messages
139
140# wscons terminal emulation
141options 	WSEMUL_VT100	# VT100 emulation
142
143# Enable the hooks used for initializing the root memory-disk.
144options 	MEMORY_DISK_HOOKS
145options 	MEMORY_DISK_IS_ROOT		# force root on memory disk
146options 	MEMORY_DISK_SERVER=0		# no userspace md(4) support
147options 	MEMORY_DISK_ROOT_SIZE=5120	# size of memory disk, in blocks
148
149makeoptions	COPTS="-Os -mmemcpy"	# generates smaller code than -O2, -O1
150
151# Kernel root file system and dump configuration.
152options 	NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
153config		netbsd	root on ? type ?
154#config		netbsd	root on sd0a type ffs
155#config		netbsd	root on ? type nfs
156
157#
158# Device configuration
159#
160
161mainbus0	at root
162cpu*		at mainbus0
163
164#### Jazz-Internal bus devices
165
166# PLATFORM_ACER_PICA_61
167# PLATFORM_MICROSOFT_JAZZ
168# PLATFORM_NEC_J96A
169# PLATFORM_NEC_JC94
170# PLATFORM_NEC_R94
171# PLATFORM_NEC_R96
172# PLATFORM_NEC_RAX94
173# PLATFORM_NEC_RD94
174jazzio*		at mainbus0	# Jazz-Internal bus host bridge.
175
176timer0		at jazzio?
177mcclock0 	at jazzio?
178#pc0		at jazzio?
179#opms0		at jazzio?
180vga0		at jazzio?	# Jazz localbus VGA
181pckbc0		at jazzio?	# PC keyboard controller
182com0		at jazzio?
183com1		at jazzio?
184lpt0		at jazzio?
185sn0		at jazzio?
186
187fdc0		at jazzio?
188fd*		at fdc? drive ?
189
190asc0		at jazzio? flags 0x000000	# NCR53C9x SCSI
191osiop*		at jazzio? flags 0x00000	# NCR53C710 SCSI
192oosiop* 	at jazzio?			# NCR53C700 SCSI
193
194#### ISA bus devices
195
196# PLATFORM_ACER_PICA_61
197# PLATFORM_MICROSOFT_JAZZ
198# PLATFORM_NEC_J96A
199# PLATFORM_NEC_R94
200# PLATFORM_NEC_R96
201jazzisabr*	at mainbus0	# Jazz-(E)ISA bus bridge.
202isa*		at jazzisabr?
203
204# PLATFORM_DESKTECH_ARCSTATION_I
205arcsisabr*	at mainbus0	# DeskStation rPC44 ISA host bridge.
206isa*		at arcsisabr?
207
208# PLATFORM_DESKTECH_TYNE
209tyneisabr*	at mainbus0	# DeskStation Tyne ISA host bridge.
210isa*		at tyneisabr?
211
212#isadma0 	at isa?
213
214isapnp0 	at isa?
215
216timer0		at isa? port 0x40 irq 0
217mcclock0 	at isa? port 0x70
218
219#pc0		at isa? irq 1			# generic PC console device
220#opms0		at isa? irq 12			# PS/2 auxiliary port mouse
221vga0		at isa?
222#options 	VGA_RASTERCONSOLE
223options 	VGA_RESET
224pckbc0		at isa?				# PC keyboard controller
225com0		at isa? port 0x3f8 irq 4
226com1		at isa? port 0x2f8 irq 3
227com2		at isa? port 0x3e8 irq 4
228com3		at isa? port 0x2e8 irq 3
229ast0		at isa? port 0x1a0 irq 3	# AST 4-port serial cards
230com*		at ast? slave ?
231
232# Joystick driver. Probe is a little strange; add only if you have one.
233#joy0		at isa? port 0x201
234
235# ISA ST506, ESDI, and IDE controllers
236# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
237# fall back to 16bits I/O if 32bits I/O are not functional).
238# Some controllers pass the initial 32bit test, but will fail later.
239wdc0		at isa? port 0x1f0 irq 14 flags 0x00
240#wdc1		at isa? port 0x170 irq 15 flags 0x00
241wdc*		at isapnp?
242
243# ISA parallel printer interfaces
244lpt0		at isa? port 0x378 irq 7
245
246# ISA network interfaces
247#ec0		at isa? port 0x250 iomem 0xd8000 irq 9	# 3Com 3c503 Ethernet
248ep*		at isa? port ? irq ?		# 3C509 ethernet cards
249ep*		at isapnp?			# 3C509B ethernet card
250ne0		at isa? port 0x280 irq 9	# NE[12]000 ethernet cards
251ne1		at isa? port 0x300 irq 10
252ne*		at isapnp?			# NE[12]000 PnP ethernet
253we0		at isa? port 0x280 iomem 0xd0000 irq 9	# WD/SMC Ethernet
254we1		at isa? port 0x300 iomem 0xcc000 irq 10
255
256# XXX - should be configured
257#btl0		at isa? port 0x330 irq ? drq ?
258
259#### PCI bus devices
260
261# PLATFORM_NEC_JC94
262# PLATFORM_NEC_RAX94
263# PLATFORM_NEC_RD94
264necpb*		at mainbus0	# NEC RISCstation PCI host bridge.
265pci*		at necpb?
266
267#vga*	 	at pci? dev ? function ?
268tga*		at pci? dev ? function ?	# DEC ZLXp-E[123] Graphics
269
270ahc*		at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
271iha*		at pci? dev ? function ?	# Initio INIC-940/950 SCSI
272pcscp*		at pci? dev ? function ?	# AMD Am53c974 PCscsi-PCI SCSI
273siop*		at pci? dev ? function ?	# NCR/Symbios 53c8xx SCSI
274trm*		at pci? dev ? function ?	# Tekram DC-395/315 SCSI
275
276# PCI IDE controllers - see pciide(4) for supported hardware.
277# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
278# how to set up DMA modes for this chip. This may work, or may cause
279# a machine hang with some controllers.
280pciide* 	at pci? dev ? function ? flags 0x0000	# GENERIC pciide driver
281acardide*	at pci? dev ? function ?	# Acard IDE controllers
282#aceride* 	at pci? dev ? function ?	# Acer Lab IDE controllers
283artsata*	at pci? dev ? function ?	# Intel i31244 SATA controller
284cmdide* 	at pci? dev ? function ?	# CMD tech IDE controllers
285cypide* 	at pci? dev ? function ?	# Cypress IDE controllers
286hptide* 	at pci? dev ? function ?	# Triones/HighPoint IDE controllers
287optiide* 	at pci? dev ? function ?	# Opti IDE controllers
288#piixide* 	at pci? dev ? function ?	# Intel IDE controllers
289pdcide* 	at pci? dev ? function ?	# Promise IDE controllers
290satalink*	at pci? dev ? function ?	# SiI SATALink controllers
291#siside* 	at pci? dev ? function ?	# SiS IDE controllers
292slide*  	at pci? dev ? function ?	# Symphony Labs IDE controllers
293#viaide* 	at pci? dev ? function ?	# VIA/AMD/Nvidia IDE controllers
294
295epic*		at pci? dev ? function ?	# SMC EPIC/100 Ethernet
296ex*		at pci? dev ? function ?	# 3Com 90x[BC]
297fxp*		at pci? dev ? function ?	# Intel EtherExpress PRO
298ne*		at pci? dev ? function ?	# NE2000-compatible
299pcn*		at pci? dev ? function ?	# AMD PCnet-PCI Ethernet
300rtk*		at pci? dev ? function ?	# Realtek 8129/8139
301sip*		at pci? dev ? function ?	# SiS 900/DP83815 Ethernet
302tlp*		at pci? dev ? function ?	# DECchip 21x4x and clones
303
304#### MII/PHY support
305
306exphy*		at mii? phy ?		# 3Com internal PHYs
307icsphy*		at mii? phy ?		# Integrated Circuit Systems ICS189x
308inphy*		at mii? phy ?		# Intel 82555 PHYs
309iophy*		at mii? phy ?		# Intel 82553 PHYs
310lxtphy*		at mii? phy ?		# Level One LXT-970 PHYs
311nsphy*		at mii? phy ?		# NS83840 PHYs
312nsphyter*	at mii? phy ?		# NS83843 PHYs
313qsphy*		at mii? phy ?		# Quality Semiconductor QS6612 PHYs
314sqphy*		at mii? phy ?		# Seeq 80220/80221/80223 PHYs
315tlphy*		at mii? phy ?		# ThunderLAN PHYs
316tqphy*		at mii? phy ?		# TDK Semiconductor PHYs
317ukphy*		at mii? phy ?		# generic unknown PHYs
318
319# SCSI bus support
320scsibus*	at scsi?
321
322#### SCSI bus devices
323
324sd*		at scsibus? target ? lun ?
325st*		at scsibus? target ? lun ?
326cd*		at scsibus? target ? lun ?
327ch*		at scsibus? target ? lun ?
328ss*		at scsibus? target ? lun ?
329uk*		at scsibus? target ? lun ?
330
331# ATA (IDE) bus support
332atabus* 	at ata?
333
334# IDE drives
335# Flags are used only with controllers that support DMA operations
336# and mode settings (e.g. some pciide controllers)
337# The lowest order four bits (rightmost digit) of the flags define the PIO
338# mode to use, the next set of four bits the DMA mode and the third set the
339# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
340# to use, and the last bit must be 1 for this setting to be used.
341# For DMA and UDMA, 0xf (1111) means 'disable'.
342# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
343# (0xc=1100, 0xa=1010, 0xf=1111)
344# 0x0000 means "use whatever the drive claims to support".
345wd*		at atabus? drive ? flags 0x0000
346
347# ATAPI bus support
348atapibus*	at atapi?
349
350#### ATAPI bus devices
351
352# flags have the same meaning as for IDE drives.
353cd*		at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
354sd*		at atapibus? drive ? flags 0x0000	# ATAPI disk drives
355uk*		at atapibus? drive ? flags 0x0000	# ATAPI unknown
356
357#### Workstation Console attachments
358
359wsdisplay*	at vga?
360wsdisplay*	at tga?
361pckbd*		at pckbc?	# PC keyboard (kbd port)
362wskbd*		at pckbd?
363pms*		at pckbc?	# PS/2-style mouse (aux port)
364wsmouse*	at pms?
365
366#### Pseudo devices
367
368# disk/mass storage pseudo-devices
369#pseudo-device	ccd		4	# concatenated/striped disk devices
370#pseudo-device	cgd		4	# cryptographic disk devices
371#pseudo-device	raid		8	# RAIDframe disk driver
372# Options to enable various other RAIDframe RAID types.
373# options	RF_INCLUDE_EVENODD=1
374# options	RF_INCLUDE_RAID5_RS=1
375# options	RF_INCLUDE_PARITYLOGGING=1
376# options	RF_INCLUDE_CHAINDECLUSTER=1
377# options	RF_INCLUDE_INTERDECLUSTER=1
378# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
379# options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
380pseudo-device	md		1	# memory disk device (ramdisk)
381#pseudo-device	vnd		4	# disk-like interface to files
382
383# network pseudo-devices
384pseudo-device	bpfilter	8	# Berkeley packet filter
385#pseudo-device	ipfilter		# IP filter (firewall) and NAT
386pseudo-device	loop		1	# network loopback
387pseudo-device	ppp		2	# Point-to-Point Protocol
388#pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
389pseudo-device	sl		2	# Serial Line IP
390#pseudo-device	strip		2	# Starmode Radio IP (Metricom)
391#pseudo-device	tun		2	# network tunneling over tty
392#pseudo-device	gre		2	# generic L3 over IP tunnel
393#pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
394#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
395#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
396#pseudo-device	vlan			# IEEE 802.1q encapsulation
397#pseudo-device	bridge			# simple inter-network bridging
398
399# miscellaneous pseudo-devices
400pseudo-device	pty		2	# pseudo-terminals
401#pseudo-device	tb		1	# tablet line discipline
402#pseudo-device	sequencer	1	# MIDI sequencer
403# rnd works; RND_COM does not on port arc yet.
404pseudo-device	rnd			# /dev/random and in-kernel generator
405#options 	RND_COM			# use "com" randomness as well (BROKEN)
406pseudo-device	clockctl		# user control of clock subsystem
407
408# a pseudo device needed for Coda	# also needs CODA (above)
409#pseudo-device	vcoda		4	# coda minicache <-> venus comm.
410
411# mouse & keyboard multiplexor pseudo-devices
412#pseudo-device	wsmux
413