RAMDISK revision 1.72.2.1 1 # $NetBSD: RAMDISK,v 1.72.2.1 2006/11/18 21:29:05 ad Exp $
2 #
3 # memory disk based configuration file for MIPS R4x00 ARC Systems
4 #
5
6 include "arch/arc/conf/std.arc"
7
8 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
9
10 #ident "GENERIC-$Revision: 1.72.2.1 $"
11
12 maxusers 32 # estimated number of users
13
14 # Platform support
15 options PLATFORM_ACER_PICA_61 # PICA, NEC ImageRISCstation
16 options PLATFORM_DESKTECH_ARCSTATION_I # DeskStation rPC44
17 options PLATFORM_DESKTECH_TYNE # DeskStation Tyne
18 options PLATFORM_MICROSOFT_JAZZ # MIPS Magnum
19 options PLATFORM_NEC_J96A # NEC Express 5800/240 EISA R4K
20 options PLATFORM_NEC_JC94 # NEC Express 5800/230 PCI R4K
21 options PLATFORM_NEC_R94 # NEC RISCstation 2200 EISA
22 options PLATFORM_NEC_R96 # NEC Express RISCserver, RISCserver 2200
23 options PLATFORM_NEC_RAX94 # NEC RISCstation 2200 PCI
24 options PLATFORM_NEC_RD94 # NEC RISCstation 2250
25 options PLATFORM_SNI_RM200PCI
26
27 # Standard system options
28
29 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
30 #options NTP # NTP phase/frequency locked loop
31
32 #options KTRACE # system call tracing via ktrace(1)
33 #options SYSTRACE # system call vetting via systrace(1)
34
35 #options SYSVMSG # System V-like message queues
36 #options SYSVSEM # System V-like semaphores
37 #options SEMMNI=10 # number of semaphore identifiers
38 #options SEMMNS=60 # number of semaphores in system
39 #options SEMUME=10 # max number of undo entries per process
40 #options SEMMNU=30 # number of undo structures in system
41 #options SYSVSHM # System V-like memory sharing
42 #options SHMMAXPGS=1024 # 1024 pages is the default
43
44 options LKM # loadable kernel modules
45
46 options USERCONF # userconf(4) support
47 options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
48 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
49
50 # Enable experimental buffer queue strategy for better responsiveness under
51 # high disk I/O load. Use it with caution - it's not proven to be stable yet.
52 #options BUFQ_READPRIO
53 #options BUFQ_PRIOCSCAN
54
55 # Diagnostic/debugging support options
56 #options DIAGNOSTIC # cheap kernel consistency checks
57 #options DEBUG # expensive debugging checks/support
58 #options KMEMSTATS # kernel memory statistics (vmstat -m)
59 options DDB # in-kernel debugger
60 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB
61 #options KGDB # remote gdb
62 #options KGDB_DEVRATE=19200 # kernel gdb port rate (default 9600)
63 #options KGDB_DEV="17*256+0" # device for kernel gdb
64 #makeoptions DEBUG="-g" # compile full symbol table
65
66 # Compatibility options
67 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
68 #options COMPAT_10 # NetBSD 1.0,
69 #options COMPAT_11 # NetBSD 1.1,
70 #options COMPAT_12 # NetBSD 1.2,
71 options COMPAT_13 # NetBSD 1.3,
72 options COMPAT_14 # NetBSD 1.4,
73 options COMPAT_15 # NetBSD 1.5,
74 options COMPAT_16 # NetBSD 1.6,
75 options COMPAT_20 # NetBSD 2.0,
76 options COMPAT_30 # NetBSD 3.0 compatibility.
77 options COMPAT_43 # and 4.3BSD
78 options COMPAT_386BSD_MBRPART # recognize old partition ID
79
80 # mipsel specific
81 #options COMPAT_ULTRIX # Ultrix binary compatibility
82 #options EXEC_ECOFF # Ultrix RISC binaries are ECOFF format
83 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
84
85 # File systems
86 file-system FFS # fast filesystem
87 #file-system EXT2FS # second extended file system (linux)
88 #file-system LFS # log-structured file system
89 file-system MFS # memory file system
90 file-system NTFS # Windows/NT file system (experimental)
91 file-system CD9660 # ISO 9660 + Rock Ridge file system
92 file-system MSDOSFS # MS-DOS file system
93 file-system NFS # Network File System client
94 file-system FDESC # /dev/fd
95 file-system KERNFS # /kern
96 file-system NULLFS # loopback file system
97 #file-system OVERLAY # overlay file system
98 #file-system PORTAL # portal filesystem (still experimental)
99 file-system PROCFS # /proc
100 #file-system UMAPFS # NULLFS + uid and gid remapping
101 #file-system UNION # union file system
102 #file-system CODA # Coda File System; also needs vcoda (below)
103 file-system PTYFS # /dev/pts/N support
104
105 # File system options
106 #options QUOTA # FFS quotas
107 #options FFS_EI # FFS Endian Independent support
108 #options SOFTDEP # FFS soft updates support.
109 #options NFSSERVER # Network File System server
110 options FFS_NO_SNAPSHOT # No FFS snapshot support
111 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
112 # immutable) behave as system flags.
113
114 # Networking options
115 #options GATEWAY # IP packet forwarding
116 options INET # IP + ICMP + TCP + UDP
117 options INET6 # IPV6
118 #options IPSEC # IP security
119 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
120 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
121 #options IPSEC_DEBUG # debug for IP security
122 #options MROUTING # IP multicast routing
123 #options PIM # Protocol Independent Multicast
124 #options ISO,TPIP # OSI networking
125 #options EON # OSI tunneling over IP
126 #options NETATALK # AppleTalk networking protocols
127 #options PPP_BSDCOMP # BSD-Compress compression support for PPP
128 #options PPP_DEFLATE # Deflate compression support for PPP
129 #options PPP_FILTER # Active filter support for PPP (requires bpf)
130 #options PFIL_HOOKS # pfil(9) packet filter hooks
131 #options IPFILTER_LOG # ipmon(8) log support
132 #options IPFILTER_LOOKUP # ippool(8) support
133 #options IPFILTER_DEFAULT_BLOCK # block all packets by default
134 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
135
136 # These options enable verbose messages for several subsystems.
137 # Warning, these may compile large string tables into the kernel!
138 #options EISAVERBOSE # verbose EISA device autoconfig messages
139 #options MIIVERBOSE # verbose PHY autoconfig messages
140 #options PCIVERBOSE # verbose PCI device autoconfig messages
141 #options PCI_CONFIG_DUMP # verbosely dump PCI config space
142 #options SCSIVERBOSE # human readable SCSI error messages
143
144 # wscons terminal emulation
145 options WSEMUL_VT100 # VT100 emulation
146
147 # Enable the hooks used for initializing the root memory-disk.
148 options MEMORY_DISK_HOOKS
149 options MEMORY_DISK_IS_ROOT # force root on memory disk
150 options MEMORY_DISK_SERVER=0 # no userspace md(4) support
151 options MEMORY_DISK_ROOT_SIZE=5120 # size of memory disk, in blocks
152
153 makeoptions COPTS="-Os -mmemcpy" # generates smaller code than -O2, -O1
154
155 # Kernel root file system and dump configuration.
156 options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
157 config netbsd root on ? type ?
158 #config netbsd root on sd0a type ffs
159 #config netbsd root on ? type nfs
160
161 #
162 # Device configuration
163 #
164
165 mainbus0 at root
166 cpu* at mainbus0
167
168 #### Jazz-Internal bus devices
169
170 # PLATFORM_ACER_PICA_61
171 # PLATFORM_MICROSOFT_JAZZ
172 # PLATFORM_NEC_J96A
173 # PLATFORM_NEC_JC94
174 # PLATFORM_NEC_R94
175 # PLATFORM_NEC_R96
176 # PLATFORM_NEC_RAX94
177 # PLATFORM_NEC_RD94
178 jazzio* at mainbus0 # Jazz-Internal bus host bridge.
179
180 timer0 at jazzio?
181 mcclock0 at jazzio?
182 #pc0 at jazzio?
183 #opms0 at jazzio?
184 vga0 at jazzio? # Jazz localbus VGA
185 pckbc0 at jazzio? # PC keyboard controller
186 com0 at jazzio?
187 com1 at jazzio?
188 lpt0 at jazzio?
189 sn0 at jazzio?
190
191 fdc0 at jazzio?
192 fd* at fdc? drive ?
193
194 asc0 at jazzio? flags 0x000000 # NCR53C9x SCSI
195 osiop* at jazzio? flags 0x00000 # NCR53C710 SCSI
196 oosiop* at jazzio? # NCR53C700 SCSI
197
198 #### ISA bus devices
199
200 # PLATFORM_ACER_PICA_61
201 # PLATFORM_MICROSOFT_JAZZ
202 # PLATFORM_NEC_J96A
203 # PLATFORM_NEC_R94
204 # PLATFORM_NEC_R96
205 jazzisabr* at mainbus0 # Jazz-(E)ISA bus bridge.
206 isa* at jazzisabr?
207
208 # PLATFORM_DESKTECH_ARCSTATION_I
209 arcsisabr* at mainbus0 # DeskStation rPC44 ISA host bridge.
210 isa* at arcsisabr?
211
212 # PLATFORM_DESKTECH_TYNE
213 tyneisabr* at mainbus0 # DeskStation Tyne ISA host bridge.
214 isa* at tyneisabr?
215
216 #isadma0 at isa?
217
218 isapnp0 at isa?
219
220 timer0 at isa? port 0x40 irq 0
221 mcclock0 at isa? port 0x70
222
223 #pc0 at isa? irq 1 # generic PC console device
224 #opms0 at isa? irq 12 # PS/2 auxiliary port mouse
225 vga0 at isa?
226 #options VGA_RASTERCONSOLE
227 options VGA_RESET
228 pckbc0 at isa? # PC keyboard controller
229 com0 at isa? port 0x3f8 irq 4
230 com1 at isa? port 0x2f8 irq 3
231 com2 at isa? port 0x3e8 irq 4
232 com3 at isa? port 0x2e8 irq 3
233 ast0 at isa? port 0x1a0 irq 3 # AST 4-port serial cards
234 com* at ast? slave ?
235
236 # Joystick driver. Probe is a little strange; add only if you have one.
237 #joy0 at isa? port 0x201
238
239 # ISA ST506, ESDI, and IDE controllers
240 # Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
241 # fall back to 16bits I/O if 32bits I/O are not functional).
242 # Some controllers pass the initial 32bit test, but will fail later.
243 wdc0 at isa? port 0x1f0 irq 14 flags 0x00
244 #wdc1 at isa? port 0x170 irq 15 flags 0x00
245 wdc* at isapnp?
246
247 # ISA parallel printer interfaces
248 lpt0 at isa? port 0x378 irq 7
249
250 # ISA network interfaces
251 #ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
252 ep* at isa? port ? irq ? # 3C509 ethernet cards
253 ep* at isapnp? # 3C509B ethernet card
254 ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
255 ne1 at isa? port 0x300 irq 10
256 ne* at isapnp? # NE[12]000 PnP ethernet
257 we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
258 we1 at isa? port 0x300 iomem 0xcc000 irq 10
259
260 # XXX - should be configured
261 #btl0 at isa? port 0x330 irq ? drq ?
262
263 #### PCI bus devices
264
265 # PLATFORM_NEC_JC94
266 # PLATFORM_NEC_RAX94
267 # PLATFORM_NEC_RD94
268 necpb* at mainbus0 # NEC RISCstation PCI host bridge.
269 pci* at necpb?
270 pci* at ppb? bus ?
271 options PCI_NETBSD_CONFIGURE
272
273 ppb* at pci? dev ? function ?
274
275 #vga* at pci? dev ? function ?
276 tga* at pci? dev ? function ? # DEC ZLXp-E[123] Graphics
277
278 ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
279 iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI
280 pcscp* at pci? dev ? function ? # AMD Am53c974 PCscsi-PCI SCSI
281 siop* at pci? dev ? function ? # NCR/Symbios 53c8xx SCSI
282 trm* at pci? dev ? function ? # Tekram DC-395/315 SCSI
283
284 # PCI IDE controllers - see pciide(4) for supported hardware.
285 # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
286 # how to set up DMA modes for this chip. This may work, or may cause
287 # a machine hang with some controllers.
288 pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
289 acardide* at pci? dev ? function ? # Acard IDE controllers
290 #aceride* at pci? dev ? function ? # Acer Lab IDE controllers
291 artsata* at pci? dev ? function ? # Intel i31244 SATA controller
292 cmdide* at pci? dev ? function ? # CMD tech IDE controllers
293 cypide* at pci? dev ? function ? # Cypress IDE controllers
294 hptide* at pci? dev ? function ? # Triones/HighPoint IDE controllers
295 optiide* at pci? dev ? function ? # Opti IDE controllers
296 pdcide* at pci? dev ? function ? # Promise IDE controllers
297 pdcsata* at pci? dev ? function ? # Promise SATA150 controllers
298 satalink* at pci? dev ? function ? # SiI SATALink controllers
299 #siside* at pci? dev ? function ? # SiS IDE controllers
300 slide* at pci? dev ? function ? # Symphony Labs IDE controllers
301 #viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers
302
303 epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
304 ex* at pci? dev ? function ? # 3Com 90x[BC]
305 fxp* at pci? dev ? function ? # Intel EtherExpress PRO
306 ne* at pci? dev ? function ? # NE2000-compatible
307 pcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernet
308 rtk* at pci? dev ? function ? # Realtek 8129/8139
309 sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
310 tlp* at pci? dev ? function ? # DECchip 21x4x and clones
311
312 #### MII/PHY support
313
314 bmtphy* at mii? phy ? # Broadcom BCM5201 and BCM5202 PHYs
315 exphy* at mii? phy ? # 3Com internal PHYs
316 icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
317 inphy* at mii? phy ? # Intel 82555 PHYs
318 iophy* at mii? phy ? # Intel 82553 PHYs
319 lxtphy* at mii? phy ? # Level One LXT-970 PHYs
320 nsphy* at mii? phy ? # NS83840 PHYs
321 nsphyter* at mii? phy ? # NS83843 PHYs
322 qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
323 sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
324 tlphy* at mii? phy ? # ThunderLAN PHYs
325 tqphy* at mii? phy ? # TDK Semiconductor PHYs
326 ukphy* at mii? phy ? # generic unknown PHYs
327
328 # SCSI bus support
329 scsibus* at scsi?
330
331 #### SCSI bus devices
332
333 sd* at scsibus? target ? lun ?
334 st* at scsibus? target ? lun ?
335 cd* at scsibus? target ? lun ?
336 ch* at scsibus? target ? lun ?
337 ss* at scsibus? target ? lun ?
338 uk* at scsibus? target ? lun ?
339
340 # ATA (IDE) bus support
341 atabus* at ata?
342
343 # IDE drives
344 # Flags are used only with controllers that support DMA operations
345 # and mode settings (e.g. some pciide controllers)
346 # The lowest order four bits (rightmost digit) of the flags define the PIO
347 # mode to use, the next set of four bits the DMA mode and the third set the
348 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
349 # to use, and the last bit must be 1 for this setting to be used.
350 # For DMA and UDMA, 0xf (1111) means 'disable'.
351 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
352 # (0xc=1100, 0xa=1010, 0xf=1111)
353 # 0x0000 means "use whatever the drive claims to support".
354 wd* at atabus? drive ? flags 0x0000
355
356 # ATAPI bus support
357 atapibus* at atapi?
358
359 #### ATAPI bus devices
360
361 # flags have the same meaning as for IDE drives.
362 cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
363 sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
364 uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
365
366 #### Workstation Console attachments
367
368 wsdisplay* at vga?
369 wsdisplay* at tga?
370 pckbd* at pckbc? # PC keyboard (kbd port)
371 wskbd* at pckbd?
372 pms* at pckbc? # PS/2-style mouse (aux port)
373 wsmouse* at pms?
374
375 #### Pseudo devices
376
377 # disk/mass storage pseudo-devices
378 #pseudo-device ccd 4 # concatenated/striped disk devices
379 #pseudo-device cgd 4 # cryptographic disk devices
380 #pseudo-device raid 8 # RAIDframe disk driver
381 # Options to enable various other RAIDframe RAID types.
382 #options RF_INCLUDE_EVENODD=1
383 #options RF_INCLUDE_RAID5_RS=1
384 #options RF_INCLUDE_PARITYLOGGING=1
385 #options RF_INCLUDE_CHAINDECLUSTER=1
386 #options RF_INCLUDE_INTERDECLUSTER=1
387 #options RF_INCLUDE_PARITY_DECLUSTERING=1
388 #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
389 #pseudo-device fss 4 # file system snapshot device
390 pseudo-device md 1 # memory disk device (ramdisk)
391 #pseudo-device vnd # disk-like interface to files
392
393 # network pseudo-devices
394 pseudo-device bpfilter # Berkeley packet filter
395 #pseudo-device ipfilter # IP filter (firewall) and NAT
396 pseudo-device loop 1 # network loopback
397 pseudo-device ppp # Point-to-Point Protocol
398 #pseudo-device pppoe # PPP over Ethernet (RFC 2516)
399 pseudo-device sl # Serial Line IP
400 #pseudo-device strip # Starmode Radio IP (Metricom)
401 #pseudo-device tun # network tunneling over tty
402 #pseudo-device tap # virtual Ethernet
403 #pseudo-device gre # generic L3 over IP tunnel
404 #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
405 #pseudo-device faith # IPv[46] tcp relay translation i/f
406 #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
407 #pseudo-device vlan # IEEE 802.1q encapsulation
408 #pseudo-device bridge # simple inter-network bridging
409
410 # miscellaneous pseudo-devices
411 pseudo-device pty 2 # pseudo-terminals
412 #pseudo-device sequencer 1 # MIDI sequencer
413 # rnd works; RND_COM does not on port arc yet.
414 pseudo-device rnd # /dev/random and in-kernel generator
415 #options RND_COM # use "com" randomness as well (BROKEN)
416 pseudo-device clockctl # user control of clock subsystem
417
418 # a pseudo device needed for Coda # also needs CODA (above)
419 #pseudo-device vcoda 4 # coda minicache <-> venus comm.
420
421 # mouse & keyboard multiplexor pseudo-devices
422 #pseudo-device wsmux
423