RPC44 revision 1.8
1 # $NetBSD: RPC44,v 1.8 2004/09/04 23:29:46 manu Exp $ 2 # 3 # GENERIC machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/arc/conf/std.arc" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "GENERIC-$Revision: 1.8 $" 26 27 maxusers 32 # estimated number of users 28 29 # Platform support 30 options PLATFORM_DESKTECH_ARCSTATION_I # DeskStation rPC44 31 32 # Standard system options 33 34 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 35 options NTP # NTP phase/frequency locked loop 36 37 options KTRACE # system call tracing via ktrace(1) 38 options SYSTRACE # system call vetting via systrace(1) 39 40 options SYSVMSG # System V-like message queues 41 options SYSVSEM # System V-like semaphores 42 #options SEMMNI=10 # number of semaphore identifiers 43 #options SEMMNS=60 # number of semaphores in system 44 #options SEMUME=10 # max number of undo entries per process 45 #options SEMMNU=30 # number of undo structures in system 46 options SYSVSHM # System V-like memory sharing 47 #options SHMMAXPGS=1024 # 1024 pages is the default 48 49 options LKM # loadable kernel modules 50 51 options USERCONF # userconf(4) support 52 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 53 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 54 55 # Enable experimental buffer queue strategy for better responsiveness under 56 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 57 #options NEW_BUFQ_STRATEGY 58 59 # Diagnostic/debugging support options 60 options DIAGNOSTIC # cheap kernel consistency checks 61 #options DEBUG # expensive debugging checks/support 62 #options KMEMSTATS # kernel memory statistics (vmstat -m) 63 options DDB # in-kernel debugger 64 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 65 #options KGDB # remote gdb 66 #options KGDB_DEVRATE=19200 # kernel gdb port rate (default 9600) 67 #options KGDB_DEV="17*256+0" # device for kernel gdb 68 #makeoptions DEBUG="-g" # compile full symbol table 69 70 # Compatibility options 71 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 72 options COMPAT_10 # NetBSD 1.0, 73 options COMPAT_11 # NetBSD 1.1, 74 options COMPAT_12 # NetBSD 1.2, 75 options COMPAT_13 # NetBSD 1.3, 76 options COMPAT_14 # NetBSD 1.4, 77 options COMPAT_16 # NetBSD 1.6, 78 options COMPAT_43 # and 4.3BSD 79 options COMPAT_386BSD_MBRPART # recognize old partition ID 80 81 # mipsel specific 82 options COMPAT_ULTRIX # Ultrix binary compatibility 83 options EXEC_ECOFF # Ultrix RISC binaries are ECOFF format 84 85 # File systems 86 file-system FFS # fast filesystem 87 #file-system EXT2FS # second extended file system (linux) 88 #file-system LFS # log-structured file system 89 #file-system MFS # memory file system 90 #file-system NTFS # Windows/NT file system (experimental) 91 file-system CD9660 # ISO 9660 + Rock Ridge file system 92 file-system MSDOSFS # MS-DOS file system 93 file-system NFS # Network File System client 94 file-system FDESC # /dev/fd 95 file-system KERNFS # /kern 96 file-system NULLFS # loopback file system 97 file-system OVERLAY # overlay file system 98 file-system PORTAL # portal filesystem (still experimental) 99 file-system PROCFS # /proc 100 file-system UMAPFS # NULLFS + uid and gid remapping 101 file-system UNION # union file system 102 #file-system CODA # Coda File System; also needs vcoda (below) 103 104 # File system options 105 options QUOTA # FFS quotas 106 #options FFS_EI # FFS Endian Independent support 107 options SOFTDEP # FFS soft updates support. 108 options NFSSERVER # Network File System server 109 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 110 # immutable) behave as system flags. 111 112 # Networking options 113 #options GATEWAY # IP packet forwarding 114 options INET # IP + ICMP + TCP + UDP 115 #options INET6 # IPV6 116 #options IPSEC # IP security 117 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 118 #options IPSEC_DEBUG # debug for IP security 119 #options MROUTING # IP multicast routing 120 #options PIM # Protocol Independent Multicast 121 #options NS # XNS 122 #options NSIP # XNS tunneling over IP 123 #options ISO,TPIP # OSI networking 124 #options EON # OSI tunneling over IP 125 #options CCITT,LLC,HDLC # X.25 126 #options NETATALK # AppleTalk networking protocols 127 #options PPP_BSDCOMP # BSD-Compress compression support for PPP 128 #options PPP_DEFLATE # Deflate compression support for PPP 129 #options PPP_FILTER # Active filter support for PPP (requires bpf) 130 #options PFIL_HOOKS # pfil(9) packet filter hooks 131 #options IPFILTER_LOG # ipmon(8) log support 132 ##options IPFILTER_DEFAULT_BLOCK # block all packets by default 133 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 134 135 # These options enable verbose messages for several subsystems. 136 # Warning, these may compile large string tables into the kernel! 137 options EISAVERBOSE # verbose EISA device autoconfig messages 138 #options PCIVERBOSE # verbose PCI device autoconfig messages 139 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 140 options SCSIVERBOSE # human readable SCSI error messages 141 142 # wscons terminal emulation 143 options WSEMUL_VT100 # VT100 emulation 144 145 # Kernel root file system and dump configuration. 146 options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM 147 config netbsd root on ? type ? 148 #config netbsd root on sd0a type ffs 149 #config netbsd root on ? type nfs 150 151 # 152 # Device configuration 153 # 154 155 mainbus0 at root 156 cpu* at mainbus0 157 158 # PLATFORM_DESKTECH_ARCSTATION_I 159 arcsisabr* at mainbus0 # DeskStation rPC44 ISA host bridge. 160 isa* at arcsisabr? 161 #isadma0 at isa? # bogus? 162 timer0 at isa? port 0x40 irq 0 163 mcclock0 at isa? port 0x70 164 pc0 at isa? irq 1 # generic PC console device 165 opms0 at isa? irq 12 # PS/2 auxiliary port mouse 166 vga0 at isa? 167 pckbc0 at isa? # PC keyboard controller 168 com0 at isa? port 0x3f8 irq 4 169 com1 at isa? port 0x2f8 irq 3 170 com2 at isa? port 0x3e8 irq 4 171 com3 at isa? port 0x2e8 irq 3 172 #bha0 at isa? port 0x330 irq ? drq ? # BusLogic [457]4X SCSI 173 #ast0 at isa? port 0x1a0 irq 3 # AST 4-port serial cards 174 #com* at ast? slave ? 175 176 # Joystick driver. Probe is a little strange; add only if you have one. 177 #joy0 at isa? port 0x201 178 179 # ISA ST506, ESDI, and IDE controllers 180 # Use flags 0x01 if you want to try to use 32bits data I/O (the driver will 181 # fall back to 16bits I/O if 32bits I/O are not functional). 182 # Some controllers pass the initial 32bit test, but will fail later. 183 # XXX - should be configured 184 wdc0 at isa? port 0x1f0 irq 14 flags 0x00 185 #wdc1 at isa? port 0x170 irq 15 flags 0x00 186 #wdc* at isapnp? 187 188 # ISA parallel printer interfaces 189 lpt0 at isa? port 0x378 irq 7 190 191 # ISA network interfaces 192 # XXX - should be configured 193 #ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet 194 ep0 at isa? port ? irq ? # 3C509 ethernet cards 195 ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards 196 #ne1 at isa? port 0x300 irq 10 197 #ne* at isapnp? # NE[12]000 PnP ethernet 198 we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet 199 #we1 at isa? port 0x300 iomem 0xcc000 irq 10 200 201 # XXX - should be configured 202 #btl0 at isa? port 0x330 irq ? drq ? 203 204 #### SCSI bus support 205 #scsibus* at scsi? 206 207 #### SCSI bus devices 208 209 #sd* at scsibus? target ? lun ? 210 #st* at scsibus? target ? lun ? 211 #cd* at scsibus? target ? lun ? 212 #ch* at scsibus? target ? lun ? 213 #ss* at scsibus? target ? lun ? 214 #uk* at scsibus? target ? lun ? 215 216 # ATA (IDE) bus support 217 atabus* at wdc? channel ? 218 219 # IDE drives 220 # Flags are used only with controllers that support DMA operations 221 # and mode settings (e.g. some pciide controllers) 222 # The lowest order four bits (rightmost digit) of the flags define the PIO 223 # mode to use, the next set of four bits the DMA mode and the third set the 224 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 225 # to use, and the last bit must be 1 for this setting to be used. 226 # For DMA and UDMA, 0xf (1111) means 'disable'. 227 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 228 # (0xc=1100, 0xa=1010, 0xf=1111) 229 # 0x0000 means "use whatever the drive claims to support". 230 # XXX - should be configured 231 wd* at atabus? drive ? flags 0x0000 232 233 #### ATAPI bus support 234 # XXX - should be configured 235 #atapibus* at atabus? 236 237 #### ATAPI bus devices 238 239 # flags have the same meaning as for IDE drives. 240 #cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 241 #sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 242 #uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 243 244 #### Workstation Console attachments 245 246 wsdisplay* at vga? 247 #wsdisplay* at tga? 248 pckbd* at pckbc? # PC keyboard (kbd port) 249 wskbd* at pckbd? 250 pms* at pckbc? # PS/2-style mouse (aux port) 251 wsmouse* at pms? 252 253 #### Pseudo devices 254 255 # disk/mass storage pseudo-devices 256 #pseudo-device ccd 4 # concatenated/striped disk devices 257 #pseudo-device cgd 4 # cryptographic disk devices 258 #pseudo-device raid 8 # RAIDframe disk driver 259 # Options to enable various other RAIDframe RAID types. 260 # options RF_INCLUDE_EVENODD=1 261 # options RF_INCLUDE_RAID5_RS=1 262 # options RF_INCLUDE_PARITYLOGGING=1 263 # options RF_INCLUDE_CHAINDECLUSTER=1 264 # options RF_INCLUDE_INTERDECLUSTER=1 265 # options RF_INCLUDE_PARITY_DECLUSTERING=1 266 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 267 pseudo-device md 1 # memory disk device (ramdisk) 268 pseudo-device vnd 4 # disk-like interface to files 269 270 # network pseudo-devices 271 pseudo-device bpfilter 8 # Berkeley packet filter 272 #pseudo-device ipfilter # IP filter (firewall) and NAT 273 pseudo-device loop 1 # network loopback 274 #pseudo-device ppp 2 # Point-to-Point Protocol 275 #pseudo-device pppoe # PPP over Ethernet (RFC 2516) 276 #pseudo-device sl 2 # Serial Line IP 277 #pseudo-device strip 2 # Starmode Radio IP (Metricom) 278 pseudo-device tun 2 # network tunneling over tty 279 #pseudo-device gre 2 # generic L3 over IP tunnel 280 #pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 281 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 282 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 283 #pseudo-device vlan # IEEE 802.1q encapsulation 284 #pseudo-device bridge # simple inter-network bridging 285 286 # miscellaneous pseudo-devices 287 pseudo-device pty # pseudo-terminals 288 #pseudo-device tb 1 # tablet line discipline 289 #pseudo-device sequencer 1 # MIDI sequencer 290 # rnd works; RND_COM does not on port arc yet. 291 pseudo-device rnd # /dev/random and in-kernel generator 292 #options RND_COM # use "com" randomness as well (BROKEN) 293 pseudo-device clockctl # user control of clock subsystem 294 295 # a pseudo device needed for Coda # also needs CODA (above) 296 #pseudo-device vcoda 4 # coda minicache <-> venus comm. 297 298 # mouse & keyboard multiplexor pseudo-devices 299 pseudo-device wsmux 300
Indexes created Tue Sep 30 11:09:46 GMT 2025