sun8i-h3-orangepi-plus2e.dts revision 1.1 
1/* $NetBSD: sun8i-h3-orangepi-plus2e.dts,v 1.1 2017/07/13 01:17:58 jmcneill Exp $ */
2
3/*-
4 * Copyright (c) 2017 Jared McNeill <jmcneill@invisible.ca>
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 *    notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 *    notice, this list of conditions and the following disclaimer in the
14 *    documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
21 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
22 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
23 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
24 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 */
28
29#include "../../../external/gpl2/dts/dist/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts"
30#include "sun8i-h3.dtsi"
31
32/ {
33	reg_gmac_3v3: gmac-3v3 {
34		compatible = "regulator-fixed";
35		pinctrl-names = "default";
36		pinctrl-0 = <&emac_phy_reset_pin>;
37		regulator-name = "gmac-3v3";
38		regulator-min-microvolt = <3300000>;
39		regulator-max-microvolt = <3300000>;
40		startup-delay-us = <100000>;
41		enable-active-high;
42		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
43	};
44};
45
46&emac {
47	pinctrl-names = "default";
48	pinctrl-0 = <&emac_pins_rgmii_a>;
49	phy-supply = <&reg_gmac_3v3>;
50	phy-mode = "rgmii";
51	phy = <&phy1>;
52
53	allwinner,leds-active-low;
54	status = "okay";
55
56	phy1: ethernet-phy@1 {
57		reg = <1>;
58	};
59};
60