1 1.1 jmcneill /* $NetBSD: sun9i-a80-cubieboard4.dts,v 1.1 2019/05/28 21:57:21 jmcneill Exp $ */ 2 1.1 jmcneill 3 1.1 jmcneill /*- 4 1.1 jmcneill * Copyright (c) 2019 Jared McNeill <jmcneill (at) invisible.ca> 5 1.1 jmcneill * All rights reserved. 6 1.1 jmcneill * 7 1.1 jmcneill * Redistribution and use in source and binary forms, with or without 8 1.1 jmcneill * modification, are permitted provided that the following conditions 9 1.1 jmcneill * are met: 10 1.1 jmcneill * 1. Redistributions of source code must retain the above copyright 11 1.1 jmcneill * notice, this list of conditions and the following disclaimer. 12 1.1 jmcneill * 2. Redistributions in binary form must reproduce the above copyright 13 1.1 jmcneill * notice, this list of conditions and the following disclaimer in the 14 1.1 jmcneill * documentation and/or other materials provided with the distribution. 15 1.1 jmcneill * 16 1.1 jmcneill * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 1.1 jmcneill * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 1.1 jmcneill * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 1.1 jmcneill * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 1.1 jmcneill * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 21 1.1 jmcneill * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 22 1.1 jmcneill * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 23 1.1 jmcneill * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 24 1.1 jmcneill * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 1.1 jmcneill * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 1.1 jmcneill * SUCH DAMAGE. 27 1.1 jmcneill */ 28 1.1 jmcneill 29 1.1 jmcneill #include "../../../external/gpl2/dts/dist/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts" 30 1.1 jmcneill 31 1.1 jmcneill / { 32 1.1 jmcneill reg_usb1_vbus: usb1-vbus { 33 1.1 jmcneill compatible = "regulator-fixed"; 34 1.1 jmcneill pinctrl-names = "default"; 35 1.1 jmcneill regulator-min-microvolt = <5000000>; 36 1.1 jmcneill regulator-max-microvolt = <5000000>; 37 1.1 jmcneill enable-active-high; 38 1.1 jmcneill gpio = <&pio 7 14 GPIO_ACTIVE_HIGH>; /* PH14 */ 39 1.1 jmcneill }; 40 1.1 jmcneill 41 1.1 jmcneill reg_usb2_vbus: usb2-vbus { 42 1.1 jmcneill compatible = "regulator-fixed"; 43 1.1 jmcneill pinctrl-names = "default"; 44 1.1 jmcneill regulator-min-microvolt = <5000000>; 45 1.1 jmcneill regulator-max-microvolt = <5000000>; 46 1.1 jmcneill enable-active-high; 47 1.1 jmcneill gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ 48 1.1 jmcneill }; 49 1.1 jmcneill }; 50 1.1 jmcneill 51 1.1 jmcneill &ehci0 { 52 1.1 jmcneill status = "okay"; 53 1.1 jmcneill }; 54 1.1 jmcneill 55 1.1 jmcneill &ehci1 { 56 1.1 jmcneill status = "okay"; 57 1.1 jmcneill }; 58 1.1 jmcneill 59 1.1 jmcneill &ehci2 { 60 1.1 jmcneill status = "okay"; 61 1.1 jmcneill }; 62 1.1 jmcneill 63 1.1 jmcneill &ohci0 { 64 1.1 jmcneill status = "okay"; 65 1.1 jmcneill }; 66 1.1 jmcneill 67 1.1 jmcneill &ohci2 { 68 1.1 jmcneill status = "okay"; 69 1.1 jmcneill }; 70 1.1 jmcneill 71 1.1 jmcneill &usbphy1 { 72 1.1 jmcneill phy-supply = <®_usb1_vbus>; 73 1.1 jmcneill status = "okay"; 74 1.1 jmcneill }; 75 1.1 jmcneill 76 1.1 jmcneill &usbphy2 { 77 1.1 jmcneill phy-supply = <®_usb2_vbus>; 78 1.1 jmcneill status = "okay"; 79 1.1 jmcneill }; 80
Indexes created Tue Sep 30 11:09:46 GMT 2025