xref: /src/sys/arch/arm/ixp12x0/ixp12x0.c

/*	$NetBSD: ixp12x0.c,v 1.15 2009/03/14 15:36:02 dsl Exp $ */
/*
 * Copyright (c) 2002, 2003
 *	Ichiro FUKUHARA <ichiro (at) ichiro.org>.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by Ichiro FUKUHARA.
 * 4. The name of the company nor the name of the author may be used to
 *    endorse or promote products derived from this software without specific
 *    prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY ICHIRO FUKUHARA ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL ICHIRO FUKUHARA OR THE VOICES IN HIS HEAD BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: ixp12x0.c,v 1.15 2009/03/14 15:36:02 dsl Exp $");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <uvm/uvm.h>

#include <machine/bus.h>

#include <arm/ixp12x0/ixp12x0reg.h>
#include <arm/ixp12x0/ixp12x0var.h>
#include <arm/ixp12x0/ixp12x0_pcireg.h>

static struct ixp12x0_softc *ixp12x0_softc;

void
ixp12x0_attach(struct ixp12x0_softc *sc)
{
	struct pcibus_attach_args pba;
	pcireg_t reg;

	ixp12x0_softc = sc;

	printf("\n");

	sc->sc_iot = &ixp12x0_bs_tag;

	/*
	 * Mapping for PCI Configuration Spase Registers
	 */
	if (bus_space_map(sc->sc_iot, IXP12X0_PCI_HWBASE, IXP12X0_PCI_SIZE,
			  0, &sc->sc_pci_ioh))
		panic("%s: unable to map PCI registers", sc->sc_dev.dv_xname);
	if (bus_space_map(sc->sc_iot, IXP12X0_PCI_TYPE0_HWBASE,
			  IXP12X0_PCI_TYPE0_SIZE, 0, &sc->sc_conf0_ioh))
		panic("%s: unable to map PCI Configutation 0\n",
		      sc->sc_dev.dv_xname);
	if (bus_space_map(sc->sc_iot, IXP12X0_PCI_TYPE1_HWBASE,
			  IXP12X0_PCI_TYPE0_SIZE, 1, &sc->sc_conf1_ioh))
		panic("%s: unable to map PCI Configutation 1\n",
		      sc->sc_dev.dv_xname);

	/*
	 * PCI bus reset
	 */
	/* disable PCI command */
	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh,
		PCI_COMMAND_STATUS_REG, 0xffff0000);
	/* XXX assert PCI reset Mode */
	reg = bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh,
		SA_CONTROL) &~ SA_CONTROL_PNR;
	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh,
		SA_CONTROL, reg);
	DELAY(10);

	/* XXX Disable door bell and outbound interrupt */
	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh,
		PCI_CAP_PTR, 0xc);
	/* Disable door bell int to PCI */
	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh,
		DBELL_PCI_MASK, 0x0);
	/* Disable door bell int to SA-core */
	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh,
		DBELL_SA_MASK, 0x0);

	/*  We setup a 1:1 memory map of bus<->physical addresses */
	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh,
		PCI_ADDR_EXT,
		PCI_ADDR_EXT_PMSA(IXP12X0_PCI_MEM_HWBASE));

	/* XXX Negate PCI reset */
	reg = bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh,
		SA_CONTROL) | SA_CONTROL_PNR;
	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh,
		SA_CONTROL, reg);
	DELAY(10);
	/*
	 * specify window size of memory access and SDRAM.
	 */
	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh, IXP_PCI_MEM_BAR,
		IXP1200_PCI_MEM_BAR & IXP_PCI_MEM_BAR_MASK);

	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh, IXP_PCI_IO_BAR,
		IXP1200_PCI_IO_BAR & IXP_PCI_IO_BAR_MASK);

	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh, IXP_PCI_DRAM_BAR,
		IXP1200_PCI_DRAM_BAR & IXP_PCI_DRAM_BAR_MASK);

	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh,
		CSR_BASE_ADDR_MASK, CSR_BASE_ADDR_MASK_1M);
	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh,
		DRAM_BASE_ADDR_MASK, DRAM_BASE_ADDR_MASK_256MB);

#ifdef PCI_DEBUG
	printf("IXP_PCI_MEM_BAR = 0x%08x\nIXP_PCI_IO_BAR = 0x%08x\nIXP_PCI_DRAM_BAR = 0x%08x\nPCI_ADDR_EXT = 0x%08x\nCSR_BASE_ADDR_MASK = 0x%08x\nDRAM_BASE_ADDR_MASK = 0x%08x\n",
	bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh, IXP_PCI_MEM_BAR),
	bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh, IXP_PCI_IO_BAR),
	bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh, IXP_PCI_DRAM_BAR),
	bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh, PCI_ADDR_EXT),
	bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh, CSR_BASE_ADDR_MASK),
	bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh, DRAM_BASE_ADDR_MASK));
#endif
	/* Initialize complete */
	reg = bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh,
		SA_CONTROL) | 0x1;
	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh,
		SA_CONTROL, reg);
#ifdef PCI_DEBUG
	printf("SA_CONTROL = 0x%08x\n",
		bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh, SA_CONTROL));
#endif
	/*
	 * Enable bus mastering and I/O,memory access
	 */
	/* host only */
	reg = bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh,
		PCI_COMMAND_STATUS_REG) |
		PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE |
		PCI_COMMAND_PARITY_ENABLE | PCI_COMMAND_SERR_ENABLE |
		PCI_COMMAND_MASTER_ENABLE | PCI_COMMAND_INVALIDATE_ENABLE;
	bus_space_write_4(sc->sc_iot, sc->sc_pci_ioh,
		PCI_COMMAND_STATUS_REG, reg);
#ifdef PCI_DEBUG
	printf("PCI_COMMAND_STATUS_REG = 0x%08x\n",
		bus_space_read_4(sc->sc_iot, sc->sc_pci_ioh, PCI_COMMAND_STATUS_REG));
#endif
	/*
	 * Initialize the PCI chipset tag.
	 */
	ixp12x0_pci_init(&sc->ia_pci_chipset, sc);

	/*
	 * Initialize the DMA tags.
	 */
	ixp12x0_pci_dma_init(sc);

	/*
	 * Attach the PCI bus.
	 */
	pba.pba_pc = &sc->ia_pci_chipset;
	pba.pba_iot = &ixp12x0_bs_tag;
	pba.pba_memt = &ixp12x0_bs_tag;
	pba.pba_dmat = &sc->ia_pci_dmat;
	pba.pba_dmat64 = NULL;
	pba.pba_bus = 0;	/* bus number = 0 */
	pba.pba_intrswiz = 0;	/* XXX */
	pba.pba_intrtag = 0;
	pba.pba_flags = PCI_FLAGS_IO_ENABLED | PCI_FLAGS_MEM_ENABLED |
		PCI_FLAGS_MRL_OKAY | PCI_FLAGS_MRM_OKAY | PCI_FLAGS_MWI_OKAY;
	(void) config_found_ia(&sc->sc_dev, "pcibus", &pba, pcibusprint);
}

void
ixp12x0_reset(void)
{
	bus_space_write_4(ixp12x0_softc->sc_iot, ixp12x0_softc->sc_pci_ioh,
		IXPPCI_IXP1200_RESET, RESET_FULL);
}