becc.c revision 1.13
1 /* $NetBSD: becc.c,v 1.13 2011/05/17 17:34:48 dyoung Exp $ */ 2 3 /* 4 * Copyright (c) 2002, 2003 Wasabi Systems, Inc. 5 * All rights reserved. 6 * 7 * Written by Jason R. Thorpe for Wasabi Systems, Inc. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed for the NetBSD Project by 20 * Wasabi Systems, Inc. 21 * 4. The name of Wasabi Systems, Inc. may not be used to endorse 22 * or promote products derived from this software without specific prior 23 * written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND 26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC 29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 /* 39 * Autoconfiguration support for the ADI Engineering Big Endian 40 * Companion Chip. 41 */ 42 43 #include <sys/cdefs.h> 44 __KERNEL_RCSID(0, "$NetBSD: becc.c,v 1.13 2011/05/17 17:34:48 dyoung Exp $"); 45 46 #include <sys/param.h> 47 #include <sys/systm.h> 48 #include <sys/device.h> 49 50 #define _ARM32_BUS_DMA_PRIVATE 51 #include <machine/bus.h> 52 53 #include <arm/xscale/i80200reg.h> 54 #include <arm/xscale/beccreg.h> 55 #include <arm/xscale/beccvar.h> 56 57 /* 58 * Virtual address at which the BECC is mapped. This is filled in 59 * by machine-dependent code. 60 */ 61 vaddr_t becc_vaddr; 62 63 /* 64 * BECC revision number. This is initialized by early bootstrap code. 65 */ 66 int becc_rev; 67 const char *becc_revisions[] = { 68 "<= 7", 69 "8", 70 ">= 9", 71 }; 72 73 /* 74 * There can be only one BECC, so we keep a global pointer to 75 * the softc, so board-specific code can use features of the 76 * BECC without having to have a handle on the softc itself. 77 */ 78 struct becc_softc *becc_softc; 79 80 static int becc_search(struct device *, struct cfdata *, 81 const int *, void *); 82 static int becc_print(void *, const char *); 83 84 static void becc_pci_dma_init(struct becc_softc *); 85 static void becc_local_dma_init(struct becc_softc *); 86 87 /* 88 * becc_attach: 89 * 90 * Board-independent attach routine for the BECC. 91 */ 92 void 93 becc_attach(struct becc_softc *sc) 94 { 95 struct pcibus_attach_args pba; 96 uint32_t reg; 97 98 becc_softc = sc; 99 100 /* 101 * Set the AF bit in the BCUMOD since the BECC will honor it. 102 * This allows the BECC to return the requested 4-byte word 103 * first when filling a cache line. 104 */ 105 __asm volatile("mrc p13, 0, %0, c1, c1, 0" : "=r" (reg)); 106 __asm volatile("mcr p13, 0, %0, c1, c1, 0" : : "r" (reg | BCUMOD_AF)); 107 108 /* 109 * Program the address windows of the PCI core. Note 110 * that PCI master and target cycles must be disabled 111 * while we configure the windows. 112 */ 113 reg = becc_pcicore_read(sc, PCI_COMMAND_STATUS_REG); 114 reg &= ~(PCI_COMMAND_MEM_ENABLE|PCI_COMMAND_MASTER_ENABLE); 115 becc_pcicore_write(sc, PCI_COMMAND_STATUS_REG, reg); 116 117 /* 118 * Program the two inbound PCI memory windows. 119 */ 120 becc_pcicore_write(sc, PCI_MAPREG_START + 0, 121 sc->sc_iwin[0].iwin_base | PCI_MAPREG_MEM_TYPE_32BIT | 122 PCI_MAPREG_MEM_PREFETCHABLE_MASK); 123 reg = becc_pcicore_read(sc, PCI_MAPREG_START + 0); 124 BECC_CSR_WRITE(BECC_PSTR0, sc->sc_iwin[0].iwin_xlate & PSTRx_ADDRMASK); 125 126 becc_pcicore_write(sc, PCI_MAPREG_START + 4, 127 sc->sc_iwin[1].iwin_base | PCI_MAPREG_MEM_TYPE_32BIT | 128 PCI_MAPREG_MEM_PREFETCHABLE_MASK); 129 reg = becc_pcicore_read(sc, PCI_MAPREG_START + 4); 130 BECC_CSR_WRITE(BECC_PSTR1, sc->sc_iwin[1].iwin_xlate & PSTRx_ADDRMASK); 131 132 /* 133 * ...and the third on v8 and later. 134 */ 135 if (becc_rev >= BECC_REV_V8) { 136 becc_pcicore_write(sc, PCI_MAPREG_START + 8, 137 sc->sc_iwin[2].iwin_base | PCI_MAPREG_MEM_TYPE_32BIT | 138 PCI_MAPREG_MEM_PREFETCHABLE_MASK); 139 reg = becc_pcicore_read(sc, PCI_MAPREG_START + 8); 140 BECC_CSR_WRITE(BECC_PSTR2, 141 sc->sc_iwin[2].iwin_xlate & PSTR2_ADDRMASK); 142 } 143 144 /* 145 * Program the two outbound PCI memory windows. 146 * NOTE: WE DO NOT BYTE-SWAP OUTBOUND WINDOWS IN BIG-ENDIAN 147 * MODE. I know this seems counter-intuitive, but that's 148 * how it is. 149 * 150 * There's a third window on v9 and later, but we don't 151 * use it for anything; program it anyway, just to be 152 * safe. 153 */ 154 BECC_CSR_WRITE(BECC_POMR1, sc->sc_owin_xlate[0] /* | POMRx_F32 */); 155 BECC_CSR_WRITE(BECC_POMR2, sc->sc_owin_xlate[1] /* | POMRx_F32 */); 156 157 if (becc_rev >= BECC_REV_V9) 158 BECC_CSR_WRITE(BECC_POMR3, 159 sc->sc_owin_xlate[2] /* | POMRx_F32 */); 160 161 /* 162 * Program the PCI I/O window. See note above about byte-swapping. 163 * 164 * XXX What about STREAM transfers? 165 */ 166 BECC_CSR_WRITE(BECC_POIR, sc->sc_ioout_xlate); 167 168 /* 169 * Configure PCI configuration cycle access. 170 */ 171 BECC_CSR_WRITE(BECC_POCR, 0); 172 173 /* 174 * ...and now reenable PCI access. 175 */ 176 reg = becc_pcicore_read(sc, PCI_COMMAND_STATUS_REG); 177 reg |= PCI_COMMAND_MEM_ENABLE | PCI_COMMAND_MASTER_ENABLE | 178 PCI_COMMAND_PARITY_ENABLE | PCI_COMMAND_SERR_ENABLE; 179 becc_pcicore_write(sc, PCI_COMMAND_STATUS_REG, reg); 180 181 /* Initialize the bus space tags. */ 182 becc_io_bs_init(&sc->sc_pci_iot, sc); 183 becc_mem_bs_init(&sc->sc_pci_memt, sc); 184 185 /* Initialize the PCI chipset tag. */ 186 becc_pci_init(&sc->sc_pci_chipset, sc); 187 188 /* Initialize the DMA tags. */ 189 becc_pci_dma_init(sc); 190 becc_local_dma_init(sc); 191 192 /* 193 * Attach any on-chip peripherals. We used indirect config, since 194 * the BECC is a soft-core with a variety of peripherals, depending 195 * on configuration. 196 */ 197 config_search_ia(becc_search, &sc->sc_dev, "becc", NULL); 198 199 /* 200 * Attach the PCI bus. 201 */ 202 pba.pba_iot = &sc->sc_pci_iot; 203 pba.pba_memt = &sc->sc_pci_memt; 204 pba.pba_dmat = &sc->sc_pci_dmat; 205 pba.pba_dmat64 = NULL; 206 pba.pba_pc = &sc->sc_pci_chipset; 207 pba.pba_bus = 0; 208 pba.pba_bridgetag = NULL; 209 pba.pba_intrswiz = 0; 210 pba.pba_intrtag = 0; 211 pba.pba_flags = PCI_FLAGS_IO_OKAY | PCI_FLAGS_MEM_OKAY | 212 PCI_FLAGS_MRL_OKAY | PCI_FLAGS_MRM_OKAY | PCI_FLAGS_MWI_OKAY; 213 (void) config_found_ia(&sc->sc_dev, "pcibus", &pba, pcibusprint); 214 } 215 216 /* 217 * becc_search: 218 * 219 * Indirect autoconfiguration glue for BECC. 220 */ 221 static int 222 becc_search(struct device *parent, struct cfdata *cf, 223 const int *ldesc, void *aux) 224 { 225 struct becc_softc *sc = (void *) parent; 226 struct becc_attach_args ba; 227 228 ba.ba_dmat = &sc->sc_local_dmat; 229 230 if (config_match(parent, cf, &ba) > 0) 231 config_attach(parent, cf, &ba, becc_print); 232 233 return (0); 234 } 235 236 /* 237 * becc_print: 238 * 239 * Autoconfiguration cfprint routine when attaching 240 * to the BECC. 241 */ 242 static int 243 becc_print(void *aux, const char *pnp) 244 { 245 246 return (UNCONF); 247 } 248 249 /* 250 * becc_pci_dma_init: 251 * 252 * Initialize the PCI DMA tag. 253 */ 254 static void 255 becc_pci_dma_init(struct becc_softc *sc) 256 { 257 bus_dma_tag_t dmat = &sc->sc_pci_dmat; 258 struct arm32_dma_range *dr = sc->sc_pci_dma_range; 259 int i = 0; 260 261 /* 262 * If we have the 128MB window, put it first, since it 263 * will always cover the entire memory range. 264 */ 265 if (becc_rev >= BECC_REV_V8) { 266 dr[i].dr_sysbase = sc->sc_iwin[2].iwin_xlate; 267 dr[i].dr_busbase = sc->sc_iwin[2].iwin_base; 268 dr[i].dr_len = (128U * 1024 * 1024); 269 i++; 270 } 271 272 dr[i].dr_sysbase = sc->sc_iwin[0].iwin_xlate; 273 dr[i].dr_busbase = sc->sc_iwin[0].iwin_base; 274 dr[i].dr_len = (32U * 1024 * 1024); 275 i++; 276 277 dr[i].dr_sysbase = sc->sc_iwin[1].iwin_xlate; 278 dr[i].dr_busbase = sc->sc_iwin[1].iwin_base; 279 dr[i].dr_len = (32U * 1024 * 1024); 280 i++; 281 282 dmat->_ranges = dr; 283 dmat->_nranges = i; 284 285 dmat->_dmamap_create = _bus_dmamap_create; 286 dmat->_dmamap_destroy = _bus_dmamap_destroy; 287 dmat->_dmamap_load = _bus_dmamap_load; 288 dmat->_dmamap_load_mbuf = _bus_dmamap_load_mbuf; 289 dmat->_dmamap_load_uio = _bus_dmamap_load_uio; 290 dmat->_dmamap_load_raw = _bus_dmamap_load_raw; 291 dmat->_dmamap_unload = _bus_dmamap_unload; 292 dmat->_dmamap_sync_pre = _bus_dmamap_sync; 293 dmat->_dmamap_sync_post = NULL; 294 295 dmat->_dmamem_alloc = _bus_dmamem_alloc; 296 dmat->_dmamem_free = _bus_dmamem_free; 297 dmat->_dmamem_map = _bus_dmamem_map; 298 dmat->_dmamem_unmap = _bus_dmamem_unmap; 299 dmat->_dmamem_mmap = _bus_dmamem_mmap; 300 } 301 302 /* 303 * becc_local_dma_init: 304 * 305 * Initialize the local DMA tag. 306 */ 307 static void 308 becc_local_dma_init(struct becc_softc *sc) 309 { 310 bus_dma_tag_t dmat = &sc->sc_local_dmat; 311 312 dmat->_ranges = NULL; 313 dmat->_nranges = 0; 314 315 dmat->_dmamap_create = _bus_dmamap_create; 316 dmat->_dmamap_destroy = _bus_dmamap_destroy; 317 dmat->_dmamap_load = _bus_dmamap_load; 318 dmat->_dmamap_load_mbuf = _bus_dmamap_load_mbuf; 319 dmat->_dmamap_load_uio = _bus_dmamap_load_uio; 320 dmat->_dmamap_load_raw = _bus_dmamap_load_raw; 321 dmat->_dmamap_unload = _bus_dmamap_unload; 322 dmat->_dmamap_sync_pre = _bus_dmamap_sync; 323 dmat->_dmamap_sync_post = NULL; 324 325 dmat->_dmamem_alloc = _bus_dmamem_alloc; 326 dmat->_dmamem_free = _bus_dmamem_free; 327 dmat->_dmamem_map = _bus_dmamem_map; 328 dmat->_dmamem_unmap = _bus_dmamem_unmap; 329 dmat->_dmamem_mmap = _bus_dmamem_mmap; 330 } 331 332 uint32_t 333 becc_pcicore_read(struct becc_softc *sc, bus_addr_t reg) 334 { 335 vaddr_t va = sc->sc_pci_cfg_base | (1U << BECC_IDSEL_BIT) | reg; 336 337 return (*(volatile uint32_t *) va); 338 } 339 340 void 341 becc_pcicore_write(struct becc_softc *sc, bus_addr_t reg, uint32_t val) 342 { 343 vaddr_t va = sc->sc_pci_cfg_base | (1U << BECC_IDSEL_BIT) | reg; 344 345 *(volatile uint32_t *) va = val; 346 } 347
Indexes created Tue Sep 23 23:09:58 GMT 2025