xref: /src/sys/arch/arm/xscale/ixp425.c

/*	$NetBSD: ixp425.c,v 1.17.8.1 2021/08/04 16:51:30 thorpej Exp $ */

/*
 * Copyright (c) 2003
 *	Ichiro FUKUHARA <ichiro (at) ichiro.org>.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY ICHIRO FUKUHARA ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL ICHIRO FUKUHARA OR THE VOICES IN HIS HEAD BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include "pci.h"

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: ixp425.c,v 1.17.8.1 2021/08/04 16:51:30 thorpej Exp $");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <uvm/uvm.h>

#include <sys/bus.h>

#include <arm/xscale/ixp425reg.h>
#include <arm/xscale/ixp425var.h>

struct	ixp425_softc *ixp425_softc;

void
ixp425_attach(device_t self)
{
	struct ixp425_softc *sc = device_private(self);
#if NPCI > 0
	struct pcibus_attach_args pba;
#endif

	sc->sc_dev = self;
	sc->sc_iot = &ixp425_bs_tag;

	ixp425_softc = sc;

	printf("\n");

	/*
	 * Mapping for GPIO Registers
	 */
	if (bus_space_map(sc->sc_iot, IXP425_GPIO_HWBASE, IXP425_GPIO_SIZE,
			  0, &sc->sc_gpio_ioh))
		panic("%s: unable to map GPIO registers", device_xname(self));

	if (bus_space_map(sc->sc_iot, IXP425_EXP_HWBASE, IXP425_EXP_SIZE,
			  0, &sc->sc_exp_ioh))
		panic("%s: unable to map Expansion Bus registers",
		    device_xname(self));

#if NPCI > 0
	/*
	 * Mapping for PCI CSR
	 */
	if (bus_space_map(sc->sc_iot, IXP425_PCI_HWBASE, IXP425_PCI_SIZE,
			  0, &sc->sc_pci_ioh))
		panic("%s: unable to map PCI registers", device_xname(self));

	/*
	 * Invoke the board-specific PCI initialization code
	 */
	ixp425_md_pci_init(sc);

	/*
	 * Generic initialization of the PCI chipset.
	 */
	ixp425_pci_init(sc);

	/*
	 * Initialize the DMA tags.
	 */
	ixp425_pci_dma_init(sc);

	/*
	 * Attach the PCI bus.
	 */
	pba.pba_pc = &sc->ia_pci_chipset;
	pba.pba_iot = &sc->sc_pci_iot;
	pba.pba_memt = &sc->sc_pci_memt;
	pba.pba_dmat = &sc->ia_pci_dmat;
	pba.pba_bus = 0;	/* bus number = 0 */
	pba.pba_bridgetag = NULL;
	pba.pba_intrswiz = 0;	/* XXX */
	pba.pba_intrtag = 0;
	pba.pba_flags = PCI_FLAGS_IO_OKAY | PCI_FLAGS_MEM_OKAY |
			PCI_FLAGS_MRL_OKAY   | PCI_FLAGS_MRM_OKAY |
			PCI_FLAGS_MWI_OKAY;
	config_found(self, &pba, pcibusprint,
	    CFARGS(.iattr = "pcibus"));
#endif
}