pxa2x0_lcd.c revision 1.30 1 1.30 tsutsui /* $NetBSD: pxa2x0_lcd.c,v 1.30 2010/08/08 11:24:52 tsutsui Exp $ */
2 1.1 bsh
3 1.1 bsh /*
4 1.1 bsh * Copyright (c) 2002 Genetec Corporation. All rights reserved.
5 1.1 bsh * Written by Hiroyuki Bessho for Genetec Corporation.
6 1.1 bsh *
7 1.1 bsh * Redistribution and use in source and binary forms, with or without
8 1.1 bsh * modification, are permitted provided that the following conditions
9 1.1 bsh * are met:
10 1.1 bsh * 1. Redistributions of source code must retain the above copyright
11 1.1 bsh * notice, this list of conditions and the following disclaimer.
12 1.1 bsh * 2. Redistributions in binary form must reproduce the above copyright
13 1.1 bsh * notice, this list of conditions and the following disclaimer in the
14 1.1 bsh * documentation and/or other materials provided with the distribution.
15 1.1 bsh * 3. All advertising materials mentioning features or use of this software
16 1.1 bsh * must display the following acknowledgement:
17 1.1 bsh * This product includes software developed for the NetBSD Project by
18 1.1 bsh * Genetec Corporation.
19 1.1 bsh * 4. The name of Genetec Corporation may not be used to endorse or
20 1.1 bsh * promote products derived from this software without specific prior
21 1.1 bsh * written permission.
22 1.1 bsh *
23 1.1 bsh * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
24 1.1 bsh * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
25 1.1 bsh * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
26 1.1 bsh * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORPORATION
27 1.1 bsh * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
28 1.1 bsh * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
29 1.1 bsh * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
30 1.1 bsh * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
31 1.1 bsh * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
32 1.1 bsh * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
33 1.1 bsh * POSSIBILITY OF SUCH DAMAGE.
34 1.1 bsh */
35 1.1 bsh
36 1.1 bsh /*
37 1.1 bsh * Support PXA2[15]0's integrated LCD controller.
38 1.1 bsh */
39 1.6 lukem
40 1.6 lukem #include <sys/cdefs.h>
41 1.30 tsutsui __KERNEL_RCSID(0, "$NetBSD: pxa2x0_lcd.c,v 1.30 2010/08/08 11:24:52 tsutsui Exp $");
42 1.6 lukem
43 1.1 bsh #include <sys/param.h>
44 1.1 bsh #include <sys/systm.h>
45 1.1 bsh #include <sys/conf.h>
46 1.1 bsh #include <sys/uio.h>
47 1.1 bsh #include <sys/malloc.h>
48 1.1 bsh #include <sys/kernel.h> /* for cold */
49 1.1 bsh
50 1.2 thorpej #include <uvm/uvm_extern.h>
51 1.2 thorpej
52 1.1 bsh #include <dev/cons.h>
53 1.1 bsh #include <dev/wscons/wsconsio.h>
54 1.1 bsh #include <dev/wscons/wsdisplayvar.h>
55 1.1 bsh #include <dev/wscons/wscons_callbacks.h>
56 1.1 bsh #include <dev/rasops/rasops.h>
57 1.1 bsh #include <dev/wsfont/wsfont.h>
58 1.1 bsh
59 1.1 bsh #include <machine/bus.h>
60 1.1 bsh #include <machine/cpu.h>
61 1.1 bsh #include <arm/cpufunc.h>
62 1.1 bsh
63 1.10 bsh #include <arm/xscale/pxa2x0cpu.h>
64 1.1 bsh #include <arm/xscale/pxa2x0var.h>
65 1.1 bsh #include <arm/xscale/pxa2x0reg.h>
66 1.1 bsh #include <arm/xscale/pxa2x0_lcd.h>
67 1.5 bsh #include <arm/xscale/pxa2x0_gpio.h>
68 1.1 bsh
69 1.1 bsh #include "wsdisplay.h"
70 1.1 bsh
71 1.16 nonaka /*
72 1.16 nonaka * Console variables. These are necessary since console is setup very early,
73 1.16 nonaka * before devices get attached.
74 1.16 nonaka */
75 1.16 nonaka struct {
76 1.24 nonaka int is_console;
77 1.16 nonaka struct pxa2x0_wsscreen_descr *descr;
78 1.16 nonaka const struct lcd_panel_geometry *geom;
79 1.16 nonaka } pxa2x0_lcd_console;
80 1.16 nonaka
81 1.30 tsutsui #ifdef PXA2X0_LCD_WRITETHROUGH
82 1.30 tsutsui int pxa2x0_lcd_writethrough = 1; /* patchable */
83 1.30 tsutsui #else
84 1.30 tsutsui int pxa2x0_lcd_writethrough = 0;
85 1.30 tsutsui #endif
86 1.30 tsutsui
87 1.15 peter int lcdintr(void *);
88 1.15 peter
89 1.15 peter static void pxa2x0_lcd_initialize(struct pxa2x0_lcd_softc *,
90 1.15 peter const struct lcd_panel_geometry *);
91 1.28 bsh #if NWSDISPLAY > 0
92 1.15 peter static void pxa2x0_lcd_setup_rasops(struct pxa2x0_lcd_softc *,
93 1.15 peter struct rasops_info *, struct pxa2x0_wsscreen_descr *,
94 1.15 peter const struct lcd_panel_geometry *);
95 1.28 bsh #endif
96 1.1 bsh
97 1.1 bsh void
98 1.4 bsh pxa2x0_lcd_geometry(struct pxa2x0_lcd_softc *sc,
99 1.4 bsh const struct lcd_panel_geometry *info)
100 1.1 bsh {
101 1.14 ober bus_space_tag_t iot;
102 1.14 ober bus_space_handle_t ioh;
103 1.14 ober uint32_t ccr0;
104 1.1 bsh int lines;
105 1.1 bsh
106 1.15 peter iot = sc->iot;
107 1.15 peter ioh = sc->ioh;
108 1.15 peter sc->geometry = info;
109 1.1 bsh
110 1.1 bsh ccr0 = LCCR0_IMASK;
111 1.22 nonaka if (CPU_IS_PXA270)
112 1.23 nonaka ccr0 |= LCCR0_CMDIM|LCCR0_RDSTM|LCCR0_LDDALT;
113 1.4 bsh if (info->panel_info & LCDPANEL_ACTIVE)
114 1.4 bsh ccr0 |= LCCR0_PAS; /* active mode */
115 1.4 bsh if ((info->panel_info & (LCDPANEL_DUAL|LCDPANEL_ACTIVE))
116 1.4 bsh == LCDPANEL_DUAL)
117 1.1 bsh ccr0 |= LCCR0_SDS; /* dual panel */
118 1.4 bsh if (info->panel_info & LCDPANEL_MONOCHROME)
119 1.1 bsh ccr0 |= LCCR0_CMS;
120 1.4 bsh bus_space_write_4(iot, ioh, LCDC_LCCR0, ccr0);
121 1.1 bsh
122 1.4 bsh bus_space_write_4(iot, ioh, LCDC_LCCR1,
123 1.1 bsh (info->panel_width-1)
124 1.1 bsh | ((info->hsync_pulse_width-1)<<10)
125 1.1 bsh | ((info->end_line_wait-1)<<16)
126 1.4 bsh | ((info->beg_line_wait-1)<<24));
127 1.1 bsh
128 1.4 bsh if (info->panel_info & LCDPANEL_DUAL)
129 1.1 bsh lines = info->panel_height/2 + info->extra_lines;
130 1.1 bsh else
131 1.1 bsh lines = info->panel_height + info->extra_lines;
132 1.1 bsh
133 1.4 bsh bus_space_write_4(iot, ioh, LCDC_LCCR2,
134 1.1 bsh (lines-1)
135 1.1 bsh | (info->vsync_pulse_width<<10)
136 1.1 bsh | (info->end_frame_wait<<16)
137 1.4 bsh | (info->beg_frame_wait<<24));
138 1.1 bsh
139 1.4 bsh bus_space_write_4(iot, ioh, LCDC_LCCR3,
140 1.1 bsh (info->pixel_clock_div<<0)
141 1.1 bsh | (info->ac_bias << 8)
142 1.1 bsh | ((info->panel_info &
143 1.1 bsh (LCDPANEL_VSP|LCDPANEL_HSP|LCDPANEL_PCP|LCDPANEL_OEP))
144 1.1 bsh <<20)
145 1.4 bsh | (4 << 24) /* 16bpp */
146 1.1 bsh | ((info->panel_info & LCDPANEL_DPC) ? (1<<27) : 0)
147 1.1 bsh );
148 1.27 nonaka
149 1.27 nonaka bus_space_write_4(iot, ioh, LCDC_LCCR4, (info->pcd_div << 31));
150 1.1 bsh }
151 1.1 bsh
152 1.14 ober /*
153 1.14 ober * Initialize the LCD controller.
154 1.14 ober */
155 1.1 bsh void
156 1.14 ober pxa2x0_lcd_initialize(struct pxa2x0_lcd_softc *sc,
157 1.14 ober const struct lcd_panel_geometry *geom)
158 1.1 bsh {
159 1.14 ober bus_space_tag_t iot;
160 1.1 bsh bus_space_handle_t ioh;
161 1.14 ober uint32_t lccr0, lscr;
162 1.14 ober int nldd;
163 1.1 bsh
164 1.15 peter iot = sc->iot;
165 1.15 peter ioh = sc->ioh;
166 1.1 bsh
167 1.14 ober /* Check if LCD is enabled before programming, it should not
168 1.14 ober * be enabled while it is being reprogrammed, therefore disable
169 1.14 ober * it first.
170 1.14 ober */
171 1.14 ober lccr0 = bus_space_read_4(iot, ioh, LCDC_LCCR0);
172 1.14 ober if (lccr0 & LCCR0_ENB) {
173 1.14 ober lccr0 |= LCCR0_LDM;
174 1.14 ober bus_space_write_4(iot, ioh, LCDC_LCCR0, lccr0);
175 1.14 ober lccr0 = bus_space_read_4(iot, ioh, LCDC_LCCR0); /* paranoia */
176 1.14 ober lccr0 |= LCCR0_DIS;
177 1.14 ober bus_space_write_4(iot, ioh, LCDC_LCCR0, lccr0);
178 1.14 ober do {
179 1.14 ober lscr = bus_space_read_4(iot, ioh, LCDC_LCSR);
180 1.14 ober } while (!(lscr & LCSR_LDD));
181 1.1 bsh }
182 1.1 bsh
183 1.1 bsh /* enable clock */
184 1.5 bsh pxa2x0_clkman_config(CKEN_LCD, 1);
185 1.1 bsh
186 1.22 nonaka lccr0 = LCCR0_IMASK;
187 1.22 nonaka if (CPU_IS_PXA270)
188 1.22 nonaka lccr0 |= LCCR0_CMDIM|LCCR0_RDSTM;
189 1.22 nonaka bus_space_write_4(iot, ioh, LCDC_LCCR0, lccr0);
190 1.1 bsh
191 1.1 bsh /*
192 1.1 bsh * setup GP[77:58] for LCD
193 1.1 bsh */
194 1.3 scw /* Always use [FLP]CLK, ACBIAS */
195 1.3 scw pxa2x0_gpio_set_function(74, GPIO_ALT_FN_2_OUT);
196 1.3 scw pxa2x0_gpio_set_function(75, GPIO_ALT_FN_2_OUT);
197 1.3 scw pxa2x0_gpio_set_function(76, GPIO_ALT_FN_2_OUT);
198 1.27 nonaka if (!ISSET(sc->flags, FLAG_NOUSE_ACBIAS))
199 1.27 nonaka pxa2x0_gpio_set_function(77, GPIO_ALT_FN_2_OUT);
200 1.3 scw
201 1.3 scw if ((geom->panel_info & LCDPANEL_ACTIVE) ||
202 1.3 scw ((geom->panel_info & (LCDPANEL_MONOCHROME|LCDPANEL_DUAL)) ==
203 1.3 scw LCDPANEL_DUAL)) {
204 1.3 scw /* active and color dual panel need L_DD[15:0] */
205 1.3 scw nldd = 16;
206 1.14 ober } else if ((geom->panel_info & LCDPANEL_DUAL) ||
207 1.3 scw !(geom->panel_info & LCDPANEL_MONOCHROME)) {
208 1.3 scw /* dual or color need L_DD[7:0] */
209 1.3 scw nldd = 8;
210 1.3 scw } else {
211 1.3 scw /* Otherwise just L_DD[3:0] */
212 1.3 scw nldd = 4;
213 1.1 bsh }
214 1.1 bsh
215 1.3 scw while (nldd--)
216 1.3 scw pxa2x0_gpio_set_function(58 + nldd, GPIO_ALT_FN_2_OUT);
217 1.1 bsh
218 1.4 bsh pxa2x0_lcd_geometry(sc, geom);
219 1.1 bsh }
220 1.1 bsh
221 1.14 ober /*
222 1.14 ober * Common driver attachment code.
223 1.14 ober */
224 1.14 ober void
225 1.14 ober pxa2x0_lcd_attach_sub(struct pxa2x0_lcd_softc *sc,
226 1.16 nonaka struct pxaip_attach_args *pxa, const struct lcd_panel_geometry *geom)
227 1.14 ober {
228 1.14 ober bus_space_tag_t iot = pxa->pxa_iot;
229 1.14 ober bus_space_handle_t ioh;
230 1.14 ober int error;
231 1.14 ober
232 1.27 nonaka aprint_normal(": PXA2x0 LCD controller\n");
233 1.27 nonaka aprint_naive("\n");
234 1.27 nonaka
235 1.14 ober sc->n_screens = 0;
236 1.14 ober LIST_INIT(&sc->screens);
237 1.1 bsh
238 1.14 ober /* map controller registers */
239 1.27 nonaka error = bus_space_map(iot, PXA2X0_LCDC_BASE, PXA2X0_LCDC_SIZE, 0, &ioh);
240 1.15 peter if (error) {
241 1.27 nonaka aprint_error_dev(sc->dev,
242 1.27 nonaka "failed to map registers (errno=%d)\n", error);
243 1.15 peter return;
244 1.15 peter }
245 1.15 peter
246 1.15 peter sc->iot = iot;
247 1.15 peter sc->ioh = ioh;
248 1.15 peter sc->dma_tag = &pxa2x0_bus_dma_tag;
249 1.15 peter
250 1.15 peter sc->ih = pxa2x0_intr_establish(PXA2X0_INT_LCD, IPL_BIO, lcdintr, sc);
251 1.15 peter if (sc->ih == NULL) {
252 1.27 nonaka aprint_error_dev(sc->dev,
253 1.27 nonaka "unable to establish interrupt at irq %d\n",
254 1.15 peter PXA2X0_INT_LCD);
255 1.15 peter return;
256 1.15 peter }
257 1.15 peter
258 1.29 kiyohara /* Must disable LCD Controller here, if already enabled. */
259 1.29 kiyohara bus_space_write_4(iot, ioh, LCDC_LCCR0, 0);
260 1.29 kiyohara
261 1.15 peter pxa2x0_lcd_initialize(sc, geom);
262 1.15 peter
263 1.28 bsh #if NWSDISPLAY > 0
264 1.16 nonaka if (pxa2x0_lcd_console.is_console) {
265 1.16 nonaka struct pxa2x0_wsscreen_descr *descr = pxa2x0_lcd_console.descr;
266 1.15 peter struct pxa2x0_lcd_screen *scr;
267 1.15 peter struct rasops_info *ri;
268 1.15 peter long defattr;
269 1.15 peter
270 1.15 peter error = pxa2x0_lcd_new_screen(sc, descr->depth, &scr);
271 1.14 ober if (error) {
272 1.27 nonaka aprint_error_dev(sc->dev,
273 1.27 nonaka "unable to create new screen (errno=%d)", error);
274 1.14 ober return;
275 1.14 ober }
276 1.14 ober
277 1.15 peter ri = &scr->rinfo;
278 1.15 peter ri->ri_hw = (void *)scr;
279 1.15 peter ri->ri_bits = scr->buf_va;
280 1.15 peter pxa2x0_lcd_setup_rasops(sc, ri, descr, geom);
281 1.15 peter
282 1.15 peter /* assumes 16 bpp */
283 1.15 peter (*ri->ri_ops.allocattr)(ri, 0, 0, 0, &defattr);
284 1.15 peter
285 1.15 peter pxa2x0_lcd_start_dma(sc, scr);
286 1.15 peter sc->active = scr;
287 1.15 peter
288 1.15 peter wsdisplay_cnattach(&descr->c, ri, ri->ri_ccol, ri->ri_crow,
289 1.15 peter defattr);
290 1.14 ober
291 1.27 nonaka aprint_normal_dev(sc->dev, "console\n");
292 1.16 nonaka }
293 1.28 bsh #endif
294 1.16 nonaka }
295 1.16 nonaka
296 1.16 nonaka int
297 1.16 nonaka pxa2x0_lcd_cnattach(struct pxa2x0_wsscreen_descr *descr,
298 1.16 nonaka const struct lcd_panel_geometry *geom)
299 1.16 nonaka {
300 1.16 nonaka
301 1.16 nonaka pxa2x0_lcd_console.descr = descr;
302 1.16 nonaka pxa2x0_lcd_console.geom = geom;
303 1.16 nonaka pxa2x0_lcd_console.is_console = 1;
304 1.14 ober
305 1.16 nonaka return 0;
306 1.14 ober }
307 1.14 ober
308 1.14 ober /*
309 1.14 ober * Interrupt handler.
310 1.14 ober */
311 1.1 bsh int
312 1.1 bsh lcdintr(void *arg)
313 1.1 bsh {
314 1.15 peter struct pxa2x0_lcd_softc *sc = (struct pxa2x0_lcd_softc *)arg;
315 1.1 bsh bus_space_tag_t iot = sc->iot;
316 1.1 bsh bus_space_handle_t ioh = sc->ioh;
317 1.15 peter uint32_t status;
318 1.1 bsh
319 1.4 bsh status = bus_space_read_4(iot, ioh, LCDC_LCSR);
320 1.1 bsh /* Clear stickey status bits */
321 1.4 bsh bus_space_write_4(iot, ioh, LCDC_LCSR, status);
322 1.1 bsh
323 1.1 bsh return 1;
324 1.1 bsh }
325 1.1 bsh
326 1.14 ober /*
327 1.14 ober * Enable DMA to cause the display to be refreshed periodically.
328 1.14 ober * This brings the screen to life...
329 1.14 ober */
330 1.1 bsh void
331 1.4 bsh pxa2x0_lcd_start_dma(struct pxa2x0_lcd_softc *sc,
332 1.4 bsh struct pxa2x0_lcd_screen *scr)
333 1.1 bsh {
334 1.14 ober bus_space_tag_t iot;
335 1.14 ober bus_space_handle_t ioh;
336 1.1 bsh uint32_t tmp;
337 1.1 bsh int val, save;
338 1.1 bsh
339 1.15 peter iot = sc->iot;
340 1.15 peter ioh = sc->ioh;
341 1.14 ober
342 1.30 tsutsui bus_dmamap_sync(sc->dma_tag, scr->dma, 0, scr->buf_size,
343 1.30 tsutsui BUS_DMASYNC_PREWRITE);
344 1.30 tsutsui
345 1.4 bsh save = disable_interrupts(I32_bit);
346 1.1 bsh
347 1.4 bsh switch (scr->depth) {
348 1.1 bsh case 1: val = 0; break;
349 1.1 bsh case 2: val = 1; break;
350 1.1 bsh case 4: val = 2; break;
351 1.1 bsh case 8: val = 3; break;
352 1.10 bsh case 16: val = 4; break;
353 1.10 bsh case 18: val = 5; break;
354 1.10 bsh case 24: val = 33; break;
355 1.1 bsh default:
356 1.1 bsh val = 4; break;
357 1.1 bsh }
358 1.1 bsh
359 1.4 bsh tmp = bus_space_read_4(iot, ioh, LCDC_LCCR3);
360 1.15 peter if (CPU_IS_PXA270) {
361 1.10 bsh bus_space_write_4(iot, ioh, LCDC_LCCR3,
362 1.23 nonaka (tmp & ~(LCCR3_BPP|LCCR3_BPP3)) | (val << LCCR3_BPP_SHIFT));
363 1.15 peter } else {
364 1.10 bsh bus_space_write_4(iot, ioh, LCDC_LCCR3,
365 1.10 bsh (tmp & ~LCCR3_BPP) | (val << LCCR3_BPP_SHIFT));
366 1.15 peter }
367 1.1 bsh
368 1.4 bsh bus_space_write_4(iot, ioh, LCDC_FDADR0,
369 1.10 bsh scr->depth >= 16 ? scr->dma_desc_pa :
370 1.4 bsh scr->dma_desc_pa + 2 * sizeof (struct lcd_dma_descriptor));
371 1.4 bsh bus_space_write_4(iot, ioh, LCDC_FDADR1,
372 1.4 bsh scr->dma_desc_pa + 1 * sizeof (struct lcd_dma_descriptor));
373 1.1 bsh
374 1.1 bsh /* clear status */
375 1.4 bsh bus_space_write_4(iot, ioh, LCDC_LCSR, 0);
376 1.1 bsh
377 1.1 bsh delay(1000); /* ??? */
378 1.1 bsh
379 1.1 bsh /* Enable LCDC */
380 1.4 bsh tmp = bus_space_read_4(iot, ioh, LCDC_LCCR0);
381 1.1 bsh /*tmp &= ~LCCR0_SFM;*/
382 1.4 bsh bus_space_write_4(iot, ioh, LCDC_LCCR0, tmp | LCCR0_ENB);
383 1.1 bsh
384 1.4 bsh restore_interrupts(save);
385 1.1 bsh }
386 1.1 bsh
387 1.14 ober /*
388 1.14 ober * Disable screen refresh.
389 1.14 ober */
390 1.1 bsh static void
391 1.4 bsh pxa2x0_lcd_stop_dma(struct pxa2x0_lcd_softc *sc)
392 1.1 bsh {
393 1.15 peter
394 1.1 bsh /* Stop LCD DMA after current frame */
395 1.4 bsh bus_space_write_4(sc->iot, sc->ioh, LCDC_LCCR0,
396 1.1 bsh LCCR0_DIS |
397 1.4 bsh bus_space_read_4(sc->iot, sc->ioh, LCDC_LCCR0));
398 1.1 bsh
399 1.1 bsh /* wait for disabling done.
400 1.1 bsh XXX: use interrupt. */
401 1.4 bsh while (LCCR0_ENB &
402 1.4 bsh bus_space_read_4(sc->iot, sc->ioh, LCDC_LCCR0))
403 1.15 peter continue;
404 1.1 bsh
405 1.4 bsh bus_space_write_4(sc->iot, sc->ioh, LCDC_LCCR0,
406 1.1 bsh ~LCCR0_DIS &
407 1.4 bsh bus_space_read_4(sc->iot, sc->ioh, LCDC_LCCR0));
408 1.1 bsh }
409 1.1 bsh
410 1.1 bsh #define _rgb(r,g,b) (((r)<<11) | ((g)<<5) | b)
411 1.1 bsh #define rgb(r,g,b) _rgb((r)>>1,g,(b)>>1)
412 1.1 bsh
413 1.1 bsh #define L 0x1f /* low intensity */
414 1.24 nonaka #define H 0x3f /* high intensity */
415 1.1 bsh
416 1.1 bsh static uint16_t basic_color_map[] = {
417 1.1 bsh rgb( 0, 0, 0), /* black */
418 1.1 bsh rgb( L, 0, 0), /* red */
419 1.1 bsh rgb( 0, L, 0), /* green */
420 1.1 bsh rgb( L, L, 0), /* brown */
421 1.1 bsh rgb( 0, 0, L), /* blue */
422 1.1 bsh rgb( L, 0, L), /* magenta */
423 1.1 bsh rgb( 0, L, L), /* cyan */
424 1.1 bsh _rgb(0x1c,0x38,0x1c), /* white */
425 1.1 bsh
426 1.1 bsh rgb( L, L, L), /* black */
427 1.1 bsh rgb( H, 0, 0), /* red */
428 1.1 bsh rgb( 0, H, 0), /* green */
429 1.1 bsh rgb( H, H, 0), /* brown */
430 1.1 bsh rgb( 0, 0, H), /* blue */
431 1.1 bsh rgb( H, 0, H), /* magenta */
432 1.1 bsh rgb( 0, H, H), /* cyan */
433 1.1 bsh rgb( H, H, H)
434 1.1 bsh };
435 1.1 bsh
436 1.1 bsh #undef H
437 1.1 bsh #undef L
438 1.1 bsh
439 1.1 bsh static void
440 1.24 nonaka init_palette(uint16_t *buf, int depth)
441 1.1 bsh {
442 1.1 bsh int i;
443 1.1 bsh
444 1.1 bsh /* convert RGB332 to RGB565 */
445 1.4 bsh switch (depth) {
446 1.1 bsh case 8:
447 1.1 bsh case 4:
448 1.1 bsh #if 0
449 1.4 bsh for (i=0; i <= 255; ++i) {
450 1.1 bsh buf[i] = ((9 * ((i>>5) & 0x07)) <<11) |
451 1.1 bsh ((9 * ((i>>2) & 0x07)) << 5) |
452 1.4 bsh ((21 * (i & 0x03))/2);
453 1.1 bsh }
454 1.1 bsh #else
455 1.4 bsh memcpy(buf, basic_color_map, sizeof basic_color_map);
456 1.4 bsh for (i=16; i < (1<<depth); ++i)
457 1.1 bsh buf[i] = 0xffff;
458 1.1 bsh #endif
459 1.1 bsh break;
460 1.8 bsh case 16:
461 1.24 nonaka /* palette is not needed */
462 1.8 bsh break;
463 1.1 bsh default:
464 1.8 bsh /* other depths are not supported */
465 1.8 bsh break;
466 1.1 bsh }
467 1.1 bsh }
468 1.1 bsh
469 1.14 ober /*
470 1.14 ober * Create and initialize a new screen buffer.
471 1.14 ober */
472 1.14 ober int
473 1.15 peter pxa2x0_lcd_new_screen(struct pxa2x0_lcd_softc *sc, int depth,
474 1.15 peter struct pxa2x0_lcd_screen **scrpp)
475 1.1 bsh {
476 1.14 ober bus_space_tag_t iot;
477 1.14 ober bus_space_handle_t ioh;
478 1.14 ober bus_dma_tag_t dma_tag;
479 1.14 ober const struct lcd_panel_geometry *geometry;
480 1.15 peter struct pxa2x0_lcd_screen *scr = NULL;
481 1.1 bsh int width, height;
482 1.1 bsh bus_size_t size;
483 1.24 nonaka int error, palette_size;
484 1.1 bsh int busdma_flag = (cold ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK);
485 1.1 bsh struct lcd_dma_descriptor *desc;
486 1.1 bsh paddr_t buf_pa, desc_pa;
487 1.1 bsh
488 1.15 peter iot = sc->iot;
489 1.15 peter ioh = sc->ioh;
490 1.15 peter dma_tag = sc->dma_tag;
491 1.15 peter geometry = sc->geometry;
492 1.14 ober
493 1.14 ober width = geometry->panel_width;
494 1.14 ober height = geometry->panel_height;
495 1.24 nonaka palette_size = 0;
496 1.1 bsh
497 1.4 bsh switch (depth) {
498 1.1 bsh case 1:
499 1.1 bsh case 2:
500 1.1 bsh case 4:
501 1.1 bsh case 8:
502 1.24 nonaka palette_size = (1<<depth) * sizeof (uint16_t);
503 1.1 bsh /* FALLTHROUGH */
504 1.1 bsh case 16:
505 1.24 nonaka size = roundup(width,4) * 2 * height;
506 1.1 bsh break;
507 1.10 bsh case 18:
508 1.10 bsh case 24:
509 1.10 bsh size = roundup(width,4) * 4 * height;
510 1.10 bsh break;
511 1.10 bsh case 19:
512 1.10 bsh case 25:
513 1.27 nonaka aprint_error_dev(sc->dev, "Not supported depth (%d)\n", depth);
514 1.14 ober return EINVAL;
515 1.1 bsh default:
516 1.27 nonaka aprint_error_dev(sc->dev, "Unknown depth (%d)\n", depth);
517 1.14 ober return EINVAL;
518 1.1 bsh }
519 1.1 bsh
520 1.15 peter scr = malloc(sizeof(*scr), M_DEVBUF, M_NOWAIT);
521 1.15 peter if (scr == NULL)
522 1.15 peter return ENOMEM;
523 1.15 peter
524 1.14 ober memset(scr, 0, sizeof(*scr));
525 1.1 bsh
526 1.1 bsh scr->nsegs = 0;
527 1.1 bsh scr->depth = depth;
528 1.1 bsh scr->buf_size = size;
529 1.1 bsh scr->buf_va = NULL;
530 1.24 nonaka size = roundup(size,16) + 3 * sizeof(struct lcd_dma_descriptor)
531 1.24 nonaka + palette_size;
532 1.1 bsh
533 1.15 peter error = bus_dmamem_alloc(dma_tag, size, 16, 0, scr->segs, 1,
534 1.15 peter &scr->nsegs, busdma_flag);
535 1.1 bsh
536 1.12 simonb if (error || scr->nsegs != 1) {
537 1.12 simonb /* XXX:
538 1.12 simonb * Actually we can handle nsegs>1 case by means
539 1.12 simonb * of multiple DMA descriptors for a panel. It
540 1.12 simonb * will make code here a bit hairly.
541 1.12 simonb */
542 1.14 ober if (error == 0)
543 1.14 ober error = E2BIG;
544 1.1 bsh goto bad;
545 1.12 simonb }
546 1.1 bsh
547 1.15 peter error = bus_dmamem_map(dma_tag, scr->segs, scr->nsegs, size,
548 1.30 tsutsui (void **)&scr->buf_va,
549 1.30 tsutsui busdma_flag | (pxa2x0_lcd_writethrough ? 0 : BUS_DMA_COHERENT));
550 1.4 bsh if (error)
551 1.1 bsh goto bad;
552 1.1 bsh
553 1.30 tsutsui /* XXX: should we have BUS_DMA_WRITETHROUGH in MI bus_dma(9) API? */
554 1.30 tsutsui if (pxa2x0_lcd_writethrough) {
555 1.30 tsutsui pt_entry_t *ptep;
556 1.30 tsutsui vaddr_t va, eva;
557 1.30 tsutsui
558 1.30 tsutsui va = (vaddr_t)scr->buf_va;
559 1.30 tsutsui eva = va + size;
560 1.30 tsutsui while (va < eva) {
561 1.30 tsutsui /* taken from arm/arm32/bus_dma.c:_bus_dmamem_map() */
562 1.30 tsutsui cpu_dcache_wbinv_range(va, PAGE_SIZE);
563 1.30 tsutsui cpu_drain_writebuf();
564 1.30 tsutsui ptep = vtopte(va);
565 1.30 tsutsui *ptep &= ~L2_S_CACHE_MASK;
566 1.30 tsutsui *ptep |= L2_C;
567 1.30 tsutsui PTE_SYNC(ptep);
568 1.30 tsutsui tlb_flush();
569 1.30 tsutsui va += PAGE_SIZE;
570 1.30 tsutsui }
571 1.30 tsutsui }
572 1.30 tsutsui
573 1.15 peter memset(scr->buf_va, 0, scr->buf_size);
574 1.1 bsh
575 1.1 bsh /* map memory for DMA */
576 1.15 peter error = bus_dmamap_create(dma_tag, 1024*1024*2, 1, 1024*1024*2, 0,
577 1.15 peter busdma_flag, &scr->dma);
578 1.15 peter if (error)
579 1.1 bsh goto bad;
580 1.15 peter
581 1.15 peter error = bus_dmamap_load(dma_tag, scr->dma, scr->buf_va, size,
582 1.15 peter NULL, busdma_flag);
583 1.15 peter if (error)
584 1.1 bsh goto bad;
585 1.1 bsh
586 1.1 bsh buf_pa = scr->segs[0].ds_addr;
587 1.24 nonaka desc_pa = buf_pa + roundup(size, PAGE_SIZE) - 3 * sizeof(*desc);
588 1.1 bsh
589 1.1 bsh /* make descriptors at the top of mapped memory */
590 1.1 bsh desc = (struct lcd_dma_descriptor *)(
591 1.18 nonaka (char *)(scr->buf_va) + roundup(size, PAGE_SIZE) -
592 1.24 nonaka 3 * sizeof(*desc));
593 1.1 bsh
594 1.1 bsh desc[0].fdadr = desc_pa;
595 1.1 bsh desc[0].fsadr = buf_pa;
596 1.1 bsh desc[0].ldcmd = scr->buf_size;
597 1.1 bsh
598 1.24 nonaka if (palette_size) {
599 1.24 nonaka init_palette((uint16_t *)((char *)desc - palette_size), depth);
600 1.1 bsh
601 1.1 bsh desc[2].fdadr = desc_pa; /* chain to panel 0 */
602 1.24 nonaka desc[2].fsadr = desc_pa - palette_size;
603 1.24 nonaka desc[2].ldcmd = palette_size | LDCMD_PAL;
604 1.1 bsh }
605 1.1 bsh
606 1.15 peter if (geometry->panel_info & LCDPANEL_DUAL) {
607 1.1 bsh /* Dual panel */
608 1.1 bsh desc[1].fdadr = desc_pa + sizeof *desc;
609 1.1 bsh desc[1].fsadr = buf_pa + scr->buf_size/2;
610 1.1 bsh desc[0].ldcmd = desc[1].ldcmd = scr->buf_size/2;
611 1.1 bsh
612 1.1 bsh }
613 1.1 bsh
614 1.1 bsh #if 0
615 1.1 bsh desc[0].ldcmd |= LDCMD_SOFINT;
616 1.1 bsh desc[1].ldcmd |= LDCMD_SOFINT;
617 1.1 bsh #endif
618 1.1 bsh
619 1.1 bsh scr->dma_desc = desc;
620 1.1 bsh scr->dma_desc_pa = desc_pa;
621 1.1 bsh scr->map_size = size; /* used when unmap this. */
622 1.1 bsh
623 1.15 peter LIST_INSERT_HEAD(&sc->screens, scr, link);
624 1.1 bsh sc->n_screens++;
625 1.1 bsh
626 1.15 peter *scrpp = scr;
627 1.15 peter
628 1.14 ober return 0;
629 1.1 bsh
630 1.1 bsh bad:
631 1.4 bsh if (scr) {
632 1.4 bsh if (scr->buf_va)
633 1.15 peter bus_dmamem_unmap(dma_tag, scr->buf_va, size);
634 1.4 bsh if (scr->nsegs)
635 1.15 peter bus_dmamem_free(dma_tag, scr->segs, scr->nsegs);
636 1.15 peter free(scr, M_DEVBUF);
637 1.1 bsh }
638 1.15 peter *scrpp = NULL;
639 1.14 ober return error;
640 1.14 ober }
641 1.14 ober
642 1.28 bsh #if NWSDISPLAY > 0
643 1.14 ober /*
644 1.14 ober * Initialize rasops for a screen, as well as struct wsscreen_descr if this
645 1.14 ober * is the first screen creation.
646 1.14 ober */
647 1.15 peter static void
648 1.15 peter pxa2x0_lcd_setup_rasops(struct pxa2x0_lcd_softc *sc, struct rasops_info *rinfo,
649 1.14 ober struct pxa2x0_wsscreen_descr *descr,
650 1.14 ober const struct lcd_panel_geometry *geom)
651 1.14 ober {
652 1.14 ober
653 1.14 ober rinfo->ri_flg = descr->flags;
654 1.14 ober rinfo->ri_depth = descr->depth;
655 1.14 ober rinfo->ri_width = geom->panel_width;
656 1.14 ober rinfo->ri_height = geom->panel_height;
657 1.14 ober rinfo->ri_stride = rinfo->ri_width * rinfo->ri_depth / 8;
658 1.14 ober #ifdef notyet
659 1.14 ober rinfo->ri_wsfcookie = -1; /* XXX */
660 1.14 ober #endif
661 1.14 ober
662 1.14 ober /* swap B and R */
663 1.14 ober if (descr->depth == 16) {
664 1.14 ober rinfo->ri_rnum = 5;
665 1.14 ober rinfo->ri_rpos = 11;
666 1.14 ober rinfo->ri_gnum = 6;
667 1.14 ober rinfo->ri_gpos = 5;
668 1.14 ober rinfo->ri_bnum = 5;
669 1.14 ober rinfo->ri_bpos = 0;
670 1.14 ober }
671 1.14 ober
672 1.14 ober if (descr->c.nrows == 0) {
673 1.14 ober /* get rasops to compute screen size the first time */
674 1.14 ober rasops_init(rinfo, 100, 100);
675 1.15 peter } else {
676 1.14 ober rasops_init(rinfo, descr->c.nrows, descr->c.ncols);
677 1.15 peter }
678 1.14 ober
679 1.14 ober descr->c.nrows = rinfo->ri_rows;
680 1.14 ober descr->c.ncols = rinfo->ri_cols;
681 1.14 ober descr->c.capabilities = rinfo->ri_caps;
682 1.14 ober descr->c.textops = &rinfo->ri_ops;
683 1.14 ober }
684 1.28 bsh #endif
685 1.14 ober
686 1.14 ober /*
687 1.14 ober * Power management
688 1.14 ober */
689 1.14 ober void
690 1.14 ober pxa2x0_lcd_suspend(struct pxa2x0_lcd_softc *sc)
691 1.14 ober {
692 1.14 ober
693 1.15 peter if (sc->active) {
694 1.14 ober pxa2x0_lcd_stop_dma(sc);
695 1.14 ober pxa2x0_clkman_config(CKEN_LCD, 0);
696 1.14 ober }
697 1.14 ober }
698 1.14 ober
699 1.14 ober void
700 1.14 ober pxa2x0_lcd_resume(struct pxa2x0_lcd_softc *sc)
701 1.14 ober {
702 1.14 ober
703 1.15 peter if (sc->active) {
704 1.14 ober pxa2x0_lcd_initialize(sc, sc->geometry);
705 1.14 ober pxa2x0_lcd_start_dma(sc, sc->active);
706 1.14 ober }
707 1.1 bsh }
708 1.1 bsh
709 1.14 ober void
710 1.14 ober pxa2x0_lcd_power(int why, void *v)
711 1.14 ober {
712 1.14 ober struct pxa2x0_lcd_softc *sc = v;
713 1.14 ober
714 1.14 ober switch (why) {
715 1.14 ober case PWR_SUSPEND:
716 1.14 ober case PWR_STANDBY:
717 1.14 ober pxa2x0_lcd_suspend(sc);
718 1.14 ober break;
719 1.14 ober
720 1.14 ober case PWR_RESUME:
721 1.14 ober pxa2x0_lcd_resume(sc);
722 1.14 ober break;
723 1.14 ober }
724 1.14 ober }
725 1.1 bsh
726 1.1 bsh #if NWSDISPLAY > 0
727 1.1 bsh /*
728 1.1 bsh * Initialize struct wsscreen_descr based on values calculated by
729 1.1 bsh * raster operation subsystem.
730 1.1 bsh */
731 1.1 bsh int
732 1.1 bsh pxa2x0_lcd_setup_wsscreen(struct pxa2x0_wsscreen_descr *descr,
733 1.1 bsh const struct lcd_panel_geometry *geom,
734 1.4 bsh const char *fontname)
735 1.1 bsh {
736 1.1 bsh int width = geom->panel_width;
737 1.1 bsh int height = geom->panel_height;
738 1.1 bsh int cookie = -1;
739 1.1 bsh struct rasops_info rinfo;
740 1.1 bsh
741 1.4 bsh memset(&rinfo, 0, sizeof rinfo);
742 1.1 bsh
743 1.4 bsh if (fontname) {
744 1.1 bsh wsfont_init();
745 1.9 he cookie = wsfont_find(fontname, 0, 0, 0,
746 1.4 bsh WSDISPLAY_FONTORDER_L2R, WSDISPLAY_FONTORDER_L2R);
747 1.4 bsh if (cookie < 0 ||
748 1.4 bsh wsfont_lock(cookie, &rinfo.ri_font))
749 1.1 bsh return -1;
750 1.1 bsh }
751 1.1 bsh else {
752 1.1 bsh /* let rasops_init() choose any font */
753 1.1 bsh }
754 1.1 bsh
755 1.1 bsh /* let rasops_init calculate # of cols and rows in character */
756 1.1 bsh rinfo.ri_flg = 0;
757 1.1 bsh rinfo.ri_depth = descr->depth;
758 1.1 bsh rinfo.ri_bits = NULL;
759 1.1 bsh rinfo.ri_width = width;
760 1.1 bsh rinfo.ri_height = height;
761 1.1 bsh rinfo.ri_stride = width * rinfo.ri_depth / 8;
762 1.10 bsh #ifdef CPU_XSCALE_PXA270
763 1.15 peter if (rinfo.ri_depth > 16)
764 1.15 peter rinfo.ri_stride = width * 4;
765 1.10 bsh #endif
766 1.1 bsh rinfo.ri_wsfcookie = cookie;
767 1.1 bsh
768 1.4 bsh rasops_init(&rinfo, 100, 100);
769 1.1 bsh
770 1.1 bsh descr->c.nrows = rinfo.ri_rows;
771 1.1 bsh descr->c.ncols = rinfo.ri_cols;
772 1.1 bsh descr->c.capabilities = rinfo.ri_caps;
773 1.1 bsh
774 1.1 bsh return cookie;
775 1.1 bsh }
776 1.1 bsh
777 1.1 bsh int
778 1.1 bsh pxa2x0_lcd_show_screen(void *v, void *cookie, int waitok,
779 1.1 bsh void (*cb)(void *, int, int), void *cbarg)
780 1.1 bsh {
781 1.1 bsh struct pxa2x0_lcd_softc *sc = v;
782 1.1 bsh struct pxa2x0_lcd_screen *scr = cookie, *old;
783 1.1 bsh
784 1.1 bsh old = sc->active;
785 1.4 bsh if (old == scr)
786 1.1 bsh return 0;
787 1.1 bsh
788 1.4 bsh if (old)
789 1.4 bsh pxa2x0_lcd_stop_dma(sc);
790 1.1 bsh
791 1.4 bsh pxa2x0_lcd_start_dma(sc, scr);
792 1.1 bsh
793 1.1 bsh sc->active = scr;
794 1.1 bsh return 0;
795 1.1 bsh }
796 1.1 bsh
797 1.1 bsh int
798 1.1 bsh pxa2x0_lcd_alloc_screen(void *v, const struct wsscreen_descr *_type,
799 1.1 bsh void **cookiep, int *curxp, int *curyp, long *attrp)
800 1.1 bsh {
801 1.1 bsh struct pxa2x0_lcd_softc *sc = v;
802 1.1 bsh struct pxa2x0_lcd_screen *scr;
803 1.9 he const struct pxa2x0_wsscreen_descr *type =
804 1.9 he (const struct pxa2x0_wsscreen_descr *)_type;
805 1.14 ober int error;
806 1.1 bsh
807 1.15 peter error = pxa2x0_lcd_new_screen(sc, type->depth, &scr);
808 1.15 peter if (error)
809 1.15 peter return error;
810 1.14 ober
811 1.1 bsh /*
812 1.1 bsh * initialize raster operation for this screen.
813 1.1 bsh */
814 1.1 bsh scr->rinfo.ri_flg = 0;
815 1.1 bsh scr->rinfo.ri_depth = type->depth;
816 1.1 bsh scr->rinfo.ri_bits = scr->buf_va;
817 1.1 bsh scr->rinfo.ri_width = sc->geometry->panel_width;
818 1.1 bsh scr->rinfo.ri_height = sc->geometry->panel_height;
819 1.1 bsh scr->rinfo.ri_stride = scr->rinfo.ri_width * scr->rinfo.ri_depth / 8;
820 1.10 bsh #ifdef CPU_XSCALE_PXA270
821 1.10 bsh if (scr->rinfo.ri_depth > 16)
822 1.10 bsh scr->rinfo.ri_stride = scr->rinfo.ri_width * 4;
823 1.10 bsh #endif
824 1.1 bsh scr->rinfo.ri_wsfcookie = -1; /* XXX */
825 1.1 bsh
826 1.4 bsh rasops_init(&scr->rinfo, type->c.nrows, type->c.ncols);
827 1.1 bsh
828 1.24 nonaka (*scr->rinfo.ri_ops.allocattr)(&scr->rinfo, 0, 0, 0, attrp);
829 1.1 bsh
830 1.1 bsh *cookiep = scr;
831 1.1 bsh *curxp = 0;
832 1.1 bsh *curyp = 0;
833 1.1 bsh
834 1.1 bsh return 0;
835 1.1 bsh }
836 1.1 bsh
837 1.1 bsh void
838 1.1 bsh pxa2x0_lcd_free_screen(void *v, void *cookie)
839 1.1 bsh {
840 1.1 bsh struct pxa2x0_lcd_softc *sc = v;
841 1.1 bsh struct pxa2x0_lcd_screen *scr = cookie;
842 1.1 bsh
843 1.4 bsh LIST_REMOVE(scr, link);
844 1.1 bsh sc->n_screens--;
845 1.4 bsh if (scr == sc->active) {
846 1.1 bsh /* at first, we need to stop LCD DMA */
847 1.1 bsh sc->active = NULL;
848 1.1 bsh
849 1.4 bsh printf("lcd_free on active screen\n");
850 1.1 bsh
851 1.1 bsh pxa2x0_lcd_stop_dma(sc);
852 1.1 bsh }
853 1.1 bsh
854 1.4 bsh if (scr->buf_va)
855 1.4 bsh bus_dmamem_unmap(sc->dma_tag, scr->buf_va, scr->map_size);
856 1.4 bsh if (scr->nsegs > 0)
857 1.4 bsh bus_dmamem_free(sc->dma_tag, scr->segs, scr->nsegs);
858 1.4 bsh free(scr, M_DEVBUF);
859 1.1 bsh }
860 1.1 bsh
861 1.1 bsh int
862 1.17 christos pxa2x0_lcd_ioctl(void *v, void *vs, u_long cmd, void *data, int flag,
863 1.13 jmmv struct lwp *l)
864 1.1 bsh {
865 1.1 bsh struct pxa2x0_lcd_softc *sc = v;
866 1.21 nonaka struct pxa2x0_lcd_screen *scr = sc->active; /* ??? */
867 1.1 bsh struct wsdisplay_fbinfo *wsdisp_info;
868 1.1 bsh uint32_t ccr0;
869 1.1 bsh
870 1.1 bsh switch (cmd) {
871 1.1 bsh case WSDISPLAYIO_GTYPE:
872 1.25 nonaka *(int *)data = WSDISPLAY_TYPE_PXALCD;
873 1.1 bsh return 0;
874 1.1 bsh
875 1.1 bsh case WSDISPLAYIO_GINFO:
876 1.1 bsh wsdisp_info = (struct wsdisplay_fbinfo *)data;
877 1.1 bsh wsdisp_info->height = sc->geometry->panel_height;
878 1.1 bsh wsdisp_info->width = sc->geometry->panel_width;
879 1.21 nonaka wsdisp_info->depth = scr->depth;
880 1.1 bsh wsdisp_info->cmsize = 0;
881 1.1 bsh return 0;
882 1.1 bsh
883 1.21 nonaka case WSDISPLAYIO_LINEBYTES:
884 1.21 nonaka *(u_int *)data = scr->rinfo.ri_stride;
885 1.21 nonaka return 0;
886 1.21 nonaka
887 1.1 bsh case WSDISPLAYIO_GETCMAP:
888 1.1 bsh case WSDISPLAYIO_PUTCMAP:
889 1.1 bsh return EPASSTHROUGH; /* XXX Colormap */
890 1.1 bsh
891 1.1 bsh case WSDISPLAYIO_SVIDEO:
892 1.4 bsh if (*(int *)data == WSDISPLAYIO_VIDEO_ON) {
893 1.1 bsh /* turn it on */
894 1.1 bsh }
895 1.1 bsh else {
896 1.1 bsh /* start LCD shutdown */
897 1.1 bsh /* sleep until interrupt */
898 1.1 bsh }
899 1.1 bsh return 0;
900 1.1 bsh
901 1.1 bsh case WSDISPLAYIO_GVIDEO:
902 1.4 bsh ccr0 = bus_space_read_4(sc->iot, sc->ioh, LCDC_LCCR0);
903 1.1 bsh *(u_int *)data = (ccr0 & (LCCR0_ENB|LCCR0_DIS)) == LCCR0_ENB ?
904 1.1 bsh WSDISPLAYIO_VIDEO_ON : WSDISPLAYIO_VIDEO_OFF;
905 1.1 bsh return 0;
906 1.1 bsh
907 1.1 bsh case WSDISPLAYIO_GCURPOS:
908 1.1 bsh case WSDISPLAYIO_SCURPOS:
909 1.1 bsh case WSDISPLAYIO_GCURMAX:
910 1.1 bsh case WSDISPLAYIO_GCURSOR:
911 1.1 bsh case WSDISPLAYIO_SCURSOR:
912 1.1 bsh return EPASSTHROUGH; /* XXX */
913 1.1 bsh }
914 1.1 bsh
915 1.1 bsh return EPASSTHROUGH;
916 1.1 bsh }
917 1.1 bsh
918 1.1 bsh paddr_t
919 1.13 jmmv pxa2x0_lcd_mmap(void *v, void *vs, off_t offset, int prot)
920 1.1 bsh {
921 1.1 bsh struct pxa2x0_lcd_softc *sc = v;
922 1.20 nonaka struct pxa2x0_lcd_screen *scr = sc->active; /* ??? */
923 1.1 bsh
924 1.20 nonaka if (scr == NULL)
925 1.20 nonaka return -1;
926 1.20 nonaka
927 1.20 nonaka if (offset < 0 ||
928 1.20 nonaka offset >= scr->rinfo.ri_stride * scr->rinfo.ri_height)
929 1.1 bsh return -1;
930 1.1 bsh
931 1.20 nonaka return bus_dmamem_mmap(sc->dma_tag, scr->segs, scr->nsegs,
932 1.30 tsutsui offset, prot,
933 1.30 tsutsui BUS_DMA_WAITOK | (pxa2x0_lcd_writethrough ? 0 : BUS_DMA_COHERENT));
934 1.1 bsh }
935 1.1 bsh
936 1.1 bsh
937 1.1 bsh static void
938 1.4 bsh pxa2x0_lcd_cursor(void *cookie, int on, int row, int col)
939 1.1 bsh {
940 1.1 bsh struct pxa2x0_lcd_screen *scr = cookie;
941 1.1 bsh
942 1.15 peter (*scr->rinfo.ri_ops.cursor)(&scr->rinfo, on, row, col);
943 1.1 bsh }
944 1.1 bsh
945 1.1 bsh static int
946 1.4 bsh pxa2x0_lcd_mapchar(void *cookie, int c, unsigned int *cp)
947 1.1 bsh {
948 1.1 bsh struct pxa2x0_lcd_screen *scr = cookie;
949 1.1 bsh
950 1.15 peter return (*scr->rinfo.ri_ops.mapchar)(&scr->rinfo, c, cp);
951 1.1 bsh }
952 1.1 bsh
953 1.1 bsh static void
954 1.4 bsh pxa2x0_lcd_putchar(void *cookie, int row, int col, u_int uc, long attr)
955 1.1 bsh {
956 1.1 bsh struct pxa2x0_lcd_screen *scr = cookie;
957 1.1 bsh
958 1.15 peter (*scr->rinfo.ri_ops.putchar)(&scr->rinfo, row, col, uc, attr);
959 1.1 bsh }
960 1.1 bsh
961 1.1 bsh static void
962 1.4 bsh pxa2x0_lcd_copycols(void *cookie, int row, int src, int dst, int num)
963 1.1 bsh {
964 1.1 bsh struct pxa2x0_lcd_screen *scr = cookie;
965 1.1 bsh
966 1.15 peter (*scr->rinfo.ri_ops.copycols)(&scr->rinfo, row, src, dst, num);
967 1.1 bsh }
968 1.1 bsh
969 1.1 bsh static void
970 1.4 bsh pxa2x0_lcd_erasecols(void *cookie, int row, int col, int num, long attr)
971 1.1 bsh {
972 1.1 bsh struct pxa2x0_lcd_screen *scr = cookie;
973 1.1 bsh
974 1.15 peter (*scr->rinfo.ri_ops.erasecols)(&scr->rinfo, row, col, num, attr);
975 1.1 bsh }
976 1.1 bsh
977 1.1 bsh static void
978 1.4 bsh pxa2x0_lcd_copyrows(void *cookie, int src, int dst, int num)
979 1.1 bsh {
980 1.1 bsh struct pxa2x0_lcd_screen *scr = cookie;
981 1.1 bsh
982 1.15 peter (*scr->rinfo.ri_ops.copyrows)(&scr->rinfo, src, dst, num);
983 1.1 bsh }
984 1.1 bsh
985 1.1 bsh static void
986 1.4 bsh pxa2x0_lcd_eraserows(void *cookie, int row, int num, long attr)
987 1.1 bsh {
988 1.1 bsh struct pxa2x0_lcd_screen *scr = cookie;
989 1.1 bsh
990 1.15 peter (*scr->rinfo.ri_ops.eraserows)(&scr->rinfo, row, num, attr);
991 1.1 bsh }
992 1.1 bsh
993 1.1 bsh static int
994 1.4 bsh pxa2x0_lcd_alloc_attr(void *cookie, int fg, int bg, int flg, long *attr)
995 1.1 bsh {
996 1.1 bsh struct pxa2x0_lcd_screen *scr = cookie;
997 1.1 bsh
998 1.15 peter return (*scr->rinfo.ri_ops.allocattr)(&scr->rinfo, fg, bg, flg, attr);
999 1.1 bsh }
1000 1.1 bsh
1001 1.1 bsh const struct wsdisplay_emulops pxa2x0_lcd_emulops = {
1002 1.1 bsh pxa2x0_lcd_cursor,
1003 1.1 bsh pxa2x0_lcd_mapchar,
1004 1.1 bsh pxa2x0_lcd_putchar,
1005 1.1 bsh pxa2x0_lcd_copycols,
1006 1.1 bsh pxa2x0_lcd_erasecols,
1007 1.1 bsh pxa2x0_lcd_copyrows,
1008 1.1 bsh pxa2x0_lcd_eraserows,
1009 1.1 bsh pxa2x0_lcd_alloc_attr
1010 1.1 bsh };
1011 1.1 bsh
1012 1.1 bsh #endif /* NWSDISPLAY > 0 */
1013