xref: /src/sys/arch/atari/conf/ATARITT

#
# $NetBSD: ATARITT,v 1.40.8.2 2002/01/08 00:23:33 nathanw Exp $
#
# This file was automatically created. Changes will be
# lost when running makeconf in this directory.
#
# Created from:
#		NetBSD: ATARITT.in,v 1.4 2001/04/10 06:28:38 leo Exp $
#		NetBSD: GENERIC.in,v 1.10 2001/11/20 11:29:41 lukem Exp $

#This configuration file is for a GENERIC ATARI-TT

#Generic atari

include "arch/atari/conf/std.atari"

#Add support for about 16 users. This variable is used to size
#various kernel structures.

maxusers	16

options 	HZ=64		# Set the clock-rate (48/64/96)

#X11R6 related options

options 	UCONSOLE	# Allow xconsole to work

#Standard system options
options 	INSECURE	# disable kernel security levels
#options 	NTP		# NTP phase/frequency locked loop

#(Co)processors this kernel should support

options 	M68030		# support for 030
options 	FPU_EMULATE	# Support for MC68881/MC68882 emulator

options 	M68040		# support for 040
options 	FPSP		# 68040 Floatingpoint support

#Networking options

options 	INET		# IP + ICMP + TCP + UDP

options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	GATEWAY		# packet forwarding
#options 	MROUTING	# IP multicast routing
options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
options 	CCITT,LLC,HDLC	# X.25
options 	NETATALK	# AppleTalk networking protocols

options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
options 	PPP_DEFLATE	# Deflate compression support for PPP
options 	PPP_FILTER	# Active filter support for PPP (requires bpf)

options 	PFIL_HOOKS	# pfil(9) packet filter hooks
options 	IPFILTER_LOG	# ipmon(8) log support
#options 	IPFILTER_DEFAULT_BLOCK	# block packages by default

#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

#File systems
file-system 	FFS		# Berkeley fast file system
file-system 	MFS		# Memory based filesystem
file-system 	KERNFS		# Kernel parameter filesystem
file-system 	MSDOSFS		# MSDOS filesystem
file-system 	CD9660		# ISO 9660 filesystem with Rock Ridge

file-system 	NFS		# Network File System client side code
file-system 	PROCFS		# Process filesystem
file-system 	FDESC		# /dev/fd
file-system 	NULLFS		# Loopback filesystem
file-system 	OVERLAY		# overlay filesystem
file-system 	UNION		# union file system
file-system 	UMAPFS		# null file system (with uid & gid remapping)
file-system 	PORTAL		# portal file system
file-system 	EXT2FS		# second extended file system (linux)
file-system 	LFS		# log-structured file system

#File system options
options 	QUOTA		# Disk quotas for local disks
#options 	FFS_EI		# FFS Endian Independant support
options 	SOFTDEP		# FFS soft updates support.
options 	NFSSERVER	# Network File System server side code
#options 	EXT2FS_SYSTEM_FLAGS	# makes ext2fs file flags (append and
				# immutable) behave as system flags.

#Misc. debugging options

options 	PANICWAIT	# Require keystroke to dump/reboot
options 	DDB		# Kernel debugger

options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
#options 	DEBUG		# expensive debugging checks/support

#Compatibility options for various existing systems

options 	COMPAT_43	# 4.3 BSD compatible system calls (required)
options 	COMPAT_10	# Compatibility to NetBSD1.0
options 	COMPAT_11	# Compatibility to NetBSD1.1
options 	COMPAT_12	# Compatibility to NetBSD1.2
options 	COMPAT_13	# Compatibility to NetBSD1.3
options 	COMPAT_14	# Compatibility to NetBSD1.4

#options 	COMPAT_09	# has no meaning on the atari
#options 	COMPAT_SUNOS	# Support to run Sun-3 executables
#options 	COMPAT_SVR4	# Support to run SVR4 executables
#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.

options 	COMPAT_AOUT_M68K # Compatibility to a.out executables
options 	EXEC_AOUT	# a.out format executables

#Support for System V IPC facilities.

options 	SYSVSHM			# System V shared memory
options 	SYSVMSG			# System V messages
options 	SYSVSEM			# System V semaphores
#options 	SEMMNI=10		# number of semaphore identifiers
#options 	SEMUME=10		# max number of undo entries per proc.
#options 	SEMMNU=30		# number of undo structures in system

#Support for various kernel options

options 	KTRACE			# Add kernel tracing system call
options 	DIAGNOSTIC		# Add additional error checking code

#These options enable verbose messages for several subsystems.
#Warning, these may compile large string tables into the kernel!

options 	SCSIVERBOSE		# human readable SCSI error messages

#Atari specific options

#options 	KFONT_8x8		# Use 8x8 font instead of 8x16
options 	ST_POOL_SIZE=22		# smallest that allows TT-HIGH

options 	TT_SCSI			# SCSI-support for TT
options 	TT_VIDEO		# Graphics support for TT

options 	MEMORY_DISK_HOOKS	# Boot RAM-disk
options 	DISKLABEL_NBDA		# NetBSD disklabels (required)
options 	DISKLABEL_AHDI		# NetBSD/AHDI disklabels

options 	SERCONSOLE		# modem1 console support
options 	RELOC_KERNEL		# TT/Falcon: relocate kernel to TT-RAM
options 	STATCLOCK		# Separate {stat,prof}clock

#Try linked commands on all targets
options 	TRY_SCSI_LINKED_COMMANDS=0x7f

#Build one kernel that can boot from any disk.

config		netbsd root on ? type ?

pseudo-device	sl			# Slip
pseudo-device	ppp			# ppp
pseudo-device	pty			# pseudo-terminals
pseudo-device	loop			# Loopback network
pseudo-device	vnd		3	# 3 pseudo disks (see vnconfig)
pseudo-device	md		2	# Boot memory disk

pseudo-device	bpfilter	2	# berkeley packet filters
pseudo-device	tun		2	# network tunnel
#pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
pseudo-device	vlan			# IEEE 802.1q encapsulation
#pseudo-device	bridge			# simple inter-network bridging
pseudo-device	ccd		4	# concatenating disk driver
#pseudo-device	raid		4	# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
pseudo-device	ipfilter		# IP filtering device
pseudo-device	rnd			# /dev/random and in-kernel generator

#Hardware options for GENERIC are in the various machine type specific files

pseudo-device	view	4	# View (graphics mapping)

pseudo-device	mouse	1	# mouse

#The following sections describe various hardware options.

ncrscsi0	at mainbus0	# NCR5380 SCSI driver
scsibus0	at ncrscsi0	# SCSI bus
zs0		at mainbus0	# Serial support through 8530
grfbus0		at mainbus0	# bitmapped display's
grfcc0		at grfbus0	# graphics driver
ite0		at grfcc0	# console
nvr0		at mainbus0	# nvram driver

grfcc1		at grfbus0	# 2nd graphics driver
ite1		at grfcc1	# 2nd tty
grfcc2		at grfbus0	# 3rd graphics driver
ite2		at grfcc2	# 3rd tty
lp0		at mainbus0	# centronics printer
ser0		at mainbus0	# UART on first 68901 (ttyB0)
avmebus0	at mainbus0	# VME bus
vme0		at avmebus0
le0		at vme0	irq 5	# Lance ethernet (Riebl/PAM).
le0		at vme0 irq 4	# Lance ethernet (BVME410).
et0		at vme0		# Crazy Dots II

#SCSI devices
sd* 	at scsibus? target ? lun ?	# SCSI disk drives
st* 	at scsibus? target ? lun ?	# SCSI tape drives
cd* 	at scsibus? target ? lun ?	# SCSI CD-ROM drives

ch* 	at scsibus? target ? lun ?	# SCSI autochangers
ss* 	at scsibus? target ? lun ?	# SCSI scanners
se* 	at scsibus? target ? lun ?	# SCSI ethernet
uk* 	at scsibus? target ? lun ?	# SCSI unknown