1 1.1 leo # 2 1.44 leo # $NetBSD: ATARITT,v 1.52 2002/10/21 16:18:34 jdc Exp $ 3 1.1 leo # 4 1.34 leo # This file was automatically created. Changes will be 5 1.34 leo # lost when running makeconf in this directory. 6 1.1 leo # 7 1.41 lukem # Created from: 8 1.36 leo # NetBSD: ATARITT.in,v 1.4 2001/04/10 06:28:38 leo Exp $ 9 1.52 jdc # NetBSD: GENERIC.in,v 1.28 2002/10/19 05:58:25 junyoung Exp $ 10 1.34 leo 11 1.34 leo #This configuration file is for a GENERIC ATARI-TT 12 1.34 leo 13 1.34 leo #Generic atari 14 1.1 leo 15 1.15 leo include "arch/atari/conf/std.atari" 16 1.34 leo 17 1.47 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 18 1.47 atatat 19 1.34 leo #Add support for about 16 users. This variable is used to size 20 1.34 leo #various kernel structures. 21 1.34 leo 22 1.1 leo maxusers 16 23 1.1 leo 24 1.34 leo options HZ=64 # Set the clock-rate (48/64/96) 25 1.34 leo 26 1.34 leo #X11R6 related options 27 1.34 leo 28 1.34 leo options UCONSOLE # Allow xconsole to work 29 1.34 leo 30 1.34 leo #Standard system options 31 1.34 leo options INSECURE # disable kernel security levels 32 1.34 leo #options NTP # NTP phase/frequency locked loop 33 1.52 jdc 34 1.52 jdc #Enable experimental buffer queue strategy for better responsiness under 35 1.52 jdc #high disk I/O load. Use it with caution - it's not proven to be stable yet. 36 1.52 jdc #options NEW_BUFQ_STRATEGY 37 1.34 leo 38 1.34 leo #(Co)processors this kernel should support 39 1.34 leo 40 1.22 lukem options M68030 # support for 030 41 1.34 leo options FPU_EMULATE # Support for MC68881/MC68882 emulator 42 1.1 leo 43 1.34 leo options M68040 # support for 040 44 1.34 leo options FPSP # 68040 Floatingpoint support 45 1.1 leo 46 1.34 leo #Networking options 47 1.13 leo 48 1.41 lukem options INET # IP + ICMP + TCP + UDP 49 1.1 leo 50 1.34 leo options INET6 # IPV6 51 1.34 leo #options IPSEC # IP security 52 1.34 leo #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 53 1.34 leo #options IPSEC_DEBUG # debug for IP security 54 1.41 lukem #options GATEWAY # packet forwarding 55 1.41 lukem #options MROUTING # IP multicast routing 56 1.41 lukem options NS # XNS 57 1.41 lukem #options NSIP # XNS tunneling over IP 58 1.41 lukem options ISO,TPIP # OSI 59 1.41 lukem #options EON # OSI tunneling over IP 60 1.41 lukem options CCITT,LLC,HDLC # X.25 61 1.49 lukem 62 1.41 lukem options NETATALK # AppleTalk networking protocols 63 1.41 lukem 64 1.41 lukem options PPP_BSDCOMP # BSD-Compress compression support for PPP 65 1.41 lukem options PPP_DEFLATE # Deflate compression support for PPP 66 1.41 lukem options PPP_FILTER # Active filter support for PPP (requires bpf) 67 1.34 leo 68 1.41 lukem options PFIL_HOOKS # pfil(9) packet filter hooks 69 1.41 lukem options IPFILTER_LOG # ipmon(8) log support 70 1.50 provos #options IPFILTER_DEFAULT_BLOCK # block packages by default 71 1.34 leo 72 1.39 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 73 1.39 abs 74 1.34 leo #File systems 75 1.34 leo file-system FFS # Berkeley fast file system 76 1.34 leo file-system MFS # Memory based filesystem 77 1.34 leo file-system KERNFS # Kernel parameter filesystem 78 1.34 leo file-system MSDOSFS # MSDOS filesystem 79 1.34 leo file-system CD9660 # ISO 9660 filesystem with Rock Ridge 80 1.34 leo 81 1.34 leo file-system NFS # Network File System client side code 82 1.34 leo file-system PROCFS # Process filesystem 83 1.34 leo file-system FDESC # /dev/fd 84 1.34 leo file-system NULLFS # Loopback filesystem 85 1.34 leo file-system OVERLAY # overlay filesystem 86 1.34 leo file-system UNION # union file system 87 1.34 leo file-system UMAPFS # null file system (with uid & gid remapping) 88 1.34 leo file-system PORTAL # portal file system 89 1.34 leo file-system EXT2FS # second extended file system (linux) 90 1.34 leo file-system LFS # log-structured file system 91 1.34 leo 92 1.34 leo #File system options 93 1.34 leo options QUOTA # Disk quotas for local disks 94 1.34 leo #options FFS_EI # FFS Endian Independant support 95 1.41 lukem options SOFTDEP # FFS soft updates support. 96 1.34 leo options NFSSERVER # Network File System server side code 97 1.34 leo #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 98 1.47 atatat #immutable) behave as system flags. 99 1.1 leo 100 1.34 leo #Misc. debugging options 101 1.1 leo 102 1.22 lukem options PANICWAIT # Require keystroke to dump/reboot 103 1.22 lukem options DDB # Kernel debugger 104 1.2 leo 105 1.34 leo options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 106 1.34 leo #options DEBUG # expensive debugging checks/support 107 1.34 leo 108 1.38 wiz #Compatibility options for various existing systems 109 1.34 leo 110 1.22 lukem options COMPAT_43 # 4.3 BSD compatible system calls (required) 111 1.22 lukem options COMPAT_10 # Compatibility to NetBSD1.0 112 1.22 lukem options COMPAT_11 # Compatibility to NetBSD1.1 113 1.22 lukem options COMPAT_12 # Compatibility to NetBSD1.2 114 1.26 kleink options COMPAT_13 # Compatibility to NetBSD1.3 115 1.28 augustss options COMPAT_14 # Compatibility to NetBSD1.4 116 1.1 leo 117 1.34 leo #options COMPAT_09 # has no meaning on the atari 118 1.34 leo #options COMPAT_SUNOS # Support to run Sun-3 executables 119 1.34 leo #options COMPAT_SVR4 # Support to run SVR4 executables 120 1.34 leo #options COMPAT_LINUX # Support to run Linux/m68k executables 121 1.39 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 122 1.34 leo 123 1.41 lukem options COMPAT_AOUT_M68K # Compatibility to a.out executables 124 1.41 lukem options EXEC_AOUT # a.out format executables 125 1.41 lukem 126 1.34 leo #Support for System V IPC facilities. 127 1.34 leo 128 1.34 leo options SYSVSHM # System V shared memory 129 1.34 leo options SYSVMSG # System V messages 130 1.34 leo options SYSVSEM # System V semaphores 131 1.40 leo #options SEMMNI=10 # number of semaphore identifiers 132 1.40 leo #options SEMUME=10 # max number of undo entries per proc. 133 1.40 leo #options SEMMNU=30 # number of undo structures in system 134 1.34 leo 135 1.34 leo #Support for various kernel options 136 1.1 leo 137 1.22 lukem options KTRACE # Add kernel tracing system call 138 1.50 provos options SYSTRACE # system call vetting via systrace(1) 139 1.22 lukem options DIAGNOSTIC # Add additional error checking code 140 1.49 lukem options USERCONF # userconf(4) support 141 1.44 leo #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 142 1.4 leo 143 1.34 leo #These options enable verbose messages for several subsystems. 144 1.34 leo #Warning, these may compile large string tables into the kernel! 145 1.34 leo 146 1.34 leo options SCSIVERBOSE # human readable SCSI error messages 147 1.34 leo 148 1.34 leo #Atari specific options 149 1.34 leo 150 1.34 leo #options KFONT_8x8 # Use 8x8 font instead of 8x16 151 1.34 leo options ST_POOL_SIZE=22 # smallest that allows TT-HIGH 152 1.34 leo 153 1.34 leo options TT_SCSI # SCSI-support for TT 154 1.34 leo options TT_VIDEO # Graphics support for TT 155 1.34 leo 156 1.22 lukem options MEMORY_DISK_HOOKS # Boot RAM-disk 157 1.22 lukem options DISKLABEL_NBDA # NetBSD disklabels (required) 158 1.22 lukem options DISKLABEL_AHDI # NetBSD/AHDI disklabels 159 1.1 leo 160 1.34 leo options SERCONSOLE # modem1 console support 161 1.34 leo options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM 162 1.49 lukem options MSGBUFSIZE=32768 # size of kernel msg. buffer 163 1.44 leo #options STATCLOCK # Separate {stat,prof}clock 164 1.34 leo 165 1.34 leo #Try linked commands on all targets 166 1.34 leo options TRY_SCSI_LINKED_COMMANDS=0x7f 167 1.34 leo 168 1.34 leo #Build one kernel that can boot from any disk. 169 1.34 leo 170 1.20 thorpej config netbsd root on ? type ? 171 1.1 leo 172 1.22 lukem pseudo-device sl # Slip 173 1.22 lukem pseudo-device ppp # ppp 174 1.46 bjh21 175 1.42 jdolecek pseudo-device pppoe # PPP over Ethernet (RFC 2516) 176 1.46 bjh21 177 1.32 jdolecek pseudo-device pty # pseudo-terminals 178 1.22 lukem pseudo-device loop # Loopback network 179 1.22 lukem pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) 180 1.24 leo pseudo-device md 2 # Boot memory disk 181 1.1 leo 182 1.34 leo pseudo-device bpfilter 2 # berkeley packet filters 183 1.34 leo pseudo-device tun 2 # network tunnel 184 1.34 leo #pseudo-device gre 2 # generic L3 over IP tunnel 185 1.34 leo pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 186 1.34 leo #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 187 1.34 leo #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 188 1.49 lukem 189 1.34 leo pseudo-device vlan # IEEE 802.1q encapsulation 190 1.42 jdolecek pseudo-device bridge # simple inter-network bridging 191 1.49 lukem 192 1.34 leo pseudo-device ccd 4 # concatenating disk driver 193 1.51 elric #pseudo-device cgd 4 # cryptographic disk driver 194 1.42 jdolecek pseudo-device raid 8 # RAIDframe disk driver 195 1.42 jdolecek options RAID_AUTOCONFIG # auto-configuration of RAID components 196 1.42 jdolecek #Options to enable various other RAIDframe RAID types. 197 1.42 jdolecek #options RF_INCLUDE_EVENODD=1 198 1.42 jdolecek #options RF_INCLUDE_RAID5_RS=1 199 1.42 jdolecek #options RF_INCLUDE_PARITYLOGGING=1 200 1.42 jdolecek #options RF_INCLUDE_CHAINDECLUSTER=1 201 1.42 jdolecek #options RF_INCLUDE_INTERDECLUSTER=1 202 1.42 jdolecek #options RF_INCLUDE_PARITY_DECLUSTERING=1 203 1.42 jdolecek #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 204 1.34 leo pseudo-device ipfilter # IP filtering device 205 1.34 leo pseudo-device rnd # /dev/random and in-kernel generator 206 1.48 lukem pseudo-device clockctl # user control of clock subsystem 207 1.34 leo 208 1.34 leo #Hardware options for GENERIC are in the various machine type specific files 209 1.34 leo 210 1.34 leo pseudo-device view 4 # View (graphics mapping) 211 1.36 leo 212 1.36 leo pseudo-device mouse 1 # mouse 213 1.34 leo 214 1.34 leo #The following sections describe various hardware options. 215 1.34 leo 216 1.34 leo ncrscsi0 at mainbus0 # NCR5380 SCSI driver 217 1.34 leo scsibus0 at ncrscsi0 # SCSI bus 218 1.34 leo zs0 at mainbus0 # Serial support through 8530 219 1.34 leo grfbus0 at mainbus0 # bitmapped display's 220 1.34 leo grfcc0 at grfbus0 # graphics driver 221 1.34 leo ite0 at grfcc0 # console 222 1.34 leo nvr0 at mainbus0 # nvram driver 223 1.34 leo 224 1.34 leo grfcc1 at grfbus0 # 2nd graphics driver 225 1.34 leo ite1 at grfcc1 # 2nd tty 226 1.34 leo grfcc2 at grfbus0 # 3rd graphics driver 227 1.34 leo ite2 at grfcc2 # 3rd tty 228 1.34 leo lp0 at mainbus0 # centronics printer 229 1.35 leo ser0 at mainbus0 # UART on first 68901 (ttyB0) 230 1.34 leo avmebus0 at mainbus0 # VME bus 231 1.34 leo vme0 at avmebus0 232 1.34 leo le0 at vme0 irq 5 # Lance ethernet (Riebl/PAM). 233 1.34 leo le0 at vme0 irq 4 # Lance ethernet (BVME410). 234 1.34 leo et0 at vme0 # Crazy Dots II 235 1.34 leo 236 1.34 leo #SCSI devices 237 1.34 leo sd* at scsibus? target ? lun ? # SCSI disk drives 238 1.34 leo st* at scsibus? target ? lun ? # SCSI tape drives 239 1.34 leo cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 240 1.34 leo 241 1.34 leo ch* at scsibus? target ? lun ? # SCSI autochangers 242 1.34 leo ss* at scsibus? target ? lun ? # SCSI scanners 243 1.34 leo se* at scsibus? target ? lun ? # SCSI ethernet 244 1.34 leo uk* at scsibus? target ? lun ? # SCSI unknown 245 1.34 leo 246