FALCON revision 1.48
1 1.1 leo # 2 1.44 leo # $NetBSD: FALCON,v 1.48 2002/06/17 05:25:18 lukem Exp $ 3 1.1 leo # 4 1.34 leo # This file was automatically created. Changes will be 5 1.34 leo # lost when running makeconf in this directory. 6 1.1 leo # 7 1.41 lukem # Created from: 8 1.41 lukem # NetBSD: FALCON.in,v 1.5 2001/11/20 11:29:41 lukem Exp $ 9 1.48 lukem # NetBSD: GENERIC.in,v 1.21 2002/06/17 05:14:06 lukem Exp $ 10 1.34 leo 11 1.34 leo #This configuration file is for a generic ATARI-Falcon 12 1.34 leo 13 1.34 leo #Define 'INSTALL_KERNEL' or 'INSTALLX_KERNEL' to generate a BOOT or 14 1.34 leo #BOOTX kernel respectively. 15 1.34 leo 16 1.34 leo #Generic atari 17 1.1 leo 18 1.12 leo include "arch/atari/conf/std.atari" 19 1.34 leo 20 1.47 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 21 1.47 atatat 22 1.34 leo #Add support for about 16 users. This variable is used to size 23 1.34 leo #various kernel structures. 24 1.34 leo 25 1.1 leo maxusers 16 26 1.1 leo 27 1.34 leo options HZ=64 # Set the clock-rate (48/64/96) 28 1.1 leo 29 1.34 leo #X11R6 related options 30 1.1 leo 31 1.21 lukem options UCONSOLE # Allow xconsole to work 32 1.10 leo 33 1.34 leo #Standard system options 34 1.34 leo options INSECURE # disable kernel security levels 35 1.34 leo #options NTP # NTP phase/frequency locked loop 36 1.34 leo 37 1.34 leo #(Co)processors this kernel should support 38 1.34 leo 39 1.34 leo options M68030 # support for 030 40 1.21 lukem options FPU_EMULATE # Support for MC68881/MC68882 emulator 41 1.10 leo 42 1.34 leo options M68040 # support for 040 43 1.34 leo options FPSP # 68040 Floatingpoint support 44 1.34 leo 45 1.34 leo #Networking options 46 1.34 leo 47 1.41 lukem options INET # IP + ICMP + TCP + UDP 48 1.34 leo 49 1.34 leo options INET6 # IPV6 50 1.34 leo #options IPSEC # IP security 51 1.34 leo #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 52 1.34 leo #options IPSEC_DEBUG # debug for IP security 53 1.41 lukem #options GATEWAY # packet forwarding 54 1.41 lukem #options MROUTING # IP multicast routing 55 1.41 lukem options NS # XNS 56 1.41 lukem #options NSIP # XNS tunneling over IP 57 1.41 lukem options ISO,TPIP # OSI 58 1.41 lukem #options EON # OSI tunneling over IP 59 1.41 lukem options CCITT,LLC,HDLC # X.25 60 1.41 lukem options NETATALK # AppleTalk networking protocols 61 1.41 lukem 62 1.41 lukem options PPP_BSDCOMP # BSD-Compress compression support for PPP 63 1.41 lukem options PPP_DEFLATE # Deflate compression support for PPP 64 1.41 lukem options PPP_FILTER # Active filter support for PPP (requires bpf) 65 1.34 leo 66 1.41 lukem options PFIL_HOOKS # pfil(9) packet filter hooks 67 1.41 lukem options IPFILTER_LOG # ipmon(8) log support 68 1.34 leo #options IPFILTER_DEFAULT_BLOCK # block packages by default 69 1.1 leo 70 1.39 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 71 1.39 abs 72 1.34 leo #File systems 73 1.18 thorpej file-system FFS # Berkeley fast file system 74 1.18 thorpej file-system MFS # Memory based filesystem 75 1.18 thorpej file-system KERNFS # Kernel parameter filesystem 76 1.18 thorpej file-system MSDOSFS # MSDOS filesystem 77 1.18 thorpej file-system CD9660 # ISO 9660 filesystem with Rock Ridge 78 1.1 leo 79 1.34 leo file-system NFS # Network File System client side code 80 1.34 leo file-system PROCFS # Process filesystem 81 1.34 leo file-system FDESC # /dev/fd 82 1.34 leo file-system NULLFS # Loopback filesystem 83 1.34 leo file-system OVERLAY # overlay filesystem 84 1.34 leo file-system UNION # union file system 85 1.34 leo file-system UMAPFS # null file system (with uid & gid remapping) 86 1.34 leo file-system PORTAL # portal file system 87 1.34 leo file-system EXT2FS # second extended file system (linux) 88 1.34 leo file-system LFS # log-structured file system 89 1.34 leo 90 1.34 leo #File system options 91 1.34 leo options QUOTA # Disk quotas for local disks 92 1.34 leo #options FFS_EI # FFS Endian Independant support 93 1.41 lukem options SOFTDEP # FFS soft updates support. 94 1.34 leo options NFSSERVER # Network File System server side code 95 1.34 leo #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 96 1.47 atatat #immutable) behave as system flags. 97 1.34 leo 98 1.34 leo #Misc. debugging options 99 1.34 leo 100 1.21 lukem options PANICWAIT # Require keystroke to dump/reboot 101 1.21 lukem options DDB # Kernel debugger 102 1.1 leo 103 1.34 leo options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 104 1.34 leo #options DEBUG # expensive debugging checks/support 105 1.34 leo 106 1.38 wiz #Compatibility options for various existing systems 107 1.34 leo 108 1.21 lukem options COMPAT_43 # 4.3 BSD compatible system calls (required) 109 1.21 lukem options COMPAT_10 # Compatibility to NetBSD1.0 110 1.21 lukem options COMPAT_11 # Compatibility to NetBSD1.1 111 1.21 lukem options COMPAT_12 # Compatibility to NetBSD1.2 112 1.25 kleink options COMPAT_13 # Compatibility to NetBSD1.3 113 1.29 augustss options COMPAT_14 # Compatibility to NetBSD1.4 114 1.1 leo 115 1.34 leo #options COMPAT_09 # has no meaning on the atari 116 1.34 leo #options COMPAT_SUNOS # Support to run Sun-3 executables 117 1.34 leo #options COMPAT_SVR4 # Support to run SVR4 executables 118 1.34 leo #options COMPAT_LINUX # Support to run Linux/m68k executables 119 1.39 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 120 1.34 leo 121 1.41 lukem options COMPAT_AOUT_M68K # Compatibility to a.out executables 122 1.41 lukem options EXEC_AOUT # a.out format executables 123 1.41 lukem 124 1.34 leo #Support for System V IPC facilities. 125 1.34 leo 126 1.34 leo options SYSVSHM # System V shared memory 127 1.34 leo options SYSVMSG # System V messages 128 1.34 leo options SYSVSEM # System V semaphores 129 1.40 leo #options SEMMNI=10 # number of semaphore identifiers 130 1.40 leo #options SEMUME=10 # max number of undo entries per proc. 131 1.40 leo #options SEMMNU=30 # number of undo structures in system 132 1.34 leo 133 1.34 leo #Support for various kernel options 134 1.34 leo 135 1.21 lukem options KTRACE # Add kernel tracing system call 136 1.21 lukem options DIAGNOSTIC # Add additional error checking code 137 1.45 leo #options USERCONF # userconf(4) support 138 1.44 leo #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 139 1.1 leo 140 1.34 leo #These options enable verbose messages for several subsystems. 141 1.34 leo #Warning, these may compile large string tables into the kernel! 142 1.34 leo 143 1.34 leo options SCSIVERBOSE # human readable SCSI error messages 144 1.34 leo 145 1.34 leo #Atari specific options 146 1.34 leo 147 1.34 leo #options KFONT_8x8 # Use 8x8 font instead of 8x16 148 1.34 leo options ST_POOL_SIZE=22 # smallest that allows TT-HIGH 149 1.34 leo 150 1.34 leo options FALCON_SCSI # SCSI-support for Falcon 151 1.21 lukem options FALCON_VIDEO # Graphics support for FALCON 152 1.34 leo 153 1.21 lukem options MEMORY_DISK_HOOKS # Boot RAM-disk 154 1.21 lukem options DISKLABEL_NBDA # NetBSD disklabels (required) 155 1.21 lukem options DISKLABEL_AHDI # NetBSD/AHDI disklabels 156 1.1 leo 157 1.34 leo options SERCONSOLE # modem1 console support 158 1.34 leo options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM 159 1.44 leo #options MSGBUFSIZE=32768 # size of kernel msg. buffer 160 1.44 leo #options STATCLOCK # Separate {stat,prof}clock 161 1.34 leo 162 1.34 leo #Try linked commands on all targets 163 1.34 leo options TRY_SCSI_LINKED_COMMANDS=0x7f 164 1.34 leo 165 1.34 leo #Build one kernel that can boot from any disk. 166 1.34 leo 167 1.18 thorpej config netbsd root on ? type ? 168 1.1 leo 169 1.21 lukem pseudo-device sl # Slip 170 1.21 lukem pseudo-device ppp # ppp 171 1.46 bjh21 172 1.32 jdolecek pseudo-device pty # pseudo-terminals 173 1.21 lukem pseudo-device loop # Loopback network 174 1.21 lukem pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) 175 1.23 leo pseudo-device md 2 # Boot memory disk 176 1.1 leo 177 1.34 leo pseudo-device bpfilter 2 # berkeley packet filters 178 1.34 leo pseudo-device tun 2 # network tunnel 179 1.34 leo #pseudo-device gre 2 # generic L3 over IP tunnel 180 1.34 leo pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 181 1.34 leo #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 182 1.34 leo #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 183 1.34 leo pseudo-device vlan # IEEE 802.1q encapsulation 184 1.42 jdolecek pseudo-device bridge # simple inter-network bridging 185 1.34 leo pseudo-device ccd 4 # concatenating disk driver 186 1.42 jdolecek pseudo-device raid 8 # RAIDframe disk driver 187 1.42 jdolecek options RAID_AUTOCONFIG # auto-configuration of RAID components 188 1.42 jdolecek #Options to enable various other RAIDframe RAID types. 189 1.42 jdolecek #options RF_INCLUDE_EVENODD=1 190 1.42 jdolecek #options RF_INCLUDE_RAID5_RS=1 191 1.42 jdolecek #options RF_INCLUDE_PARITYLOGGING=1 192 1.42 jdolecek #options RF_INCLUDE_CHAINDECLUSTER=1 193 1.42 jdolecek #options RF_INCLUDE_INTERDECLUSTER=1 194 1.42 jdolecek #options RF_INCLUDE_PARITY_DECLUSTERING=1 195 1.42 jdolecek #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 196 1.34 leo pseudo-device ipfilter # IP filtering device 197 1.34 leo pseudo-device rnd # /dev/random and in-kernel generator 198 1.48 lukem pseudo-device clockctl # user control of clock subsystem 199 1.34 leo 200 1.34 leo #Hardware options for GENERIC are in the various machine type specific files 201 1.34 leo 202 1.34 leo pseudo-device view 4 # View (graphics mapping) 203 1.34 leo 204 1.36 leo pseudo-device mouse 1 # mouse 205 1.36 leo 206 1.34 leo #The following sections describe various hardware options. 207 1.34 leo 208 1.34 leo ncrscsi0 at mainbus0 # NCR5380 SCSI driver 209 1.34 leo scsibus0 at ncrscsi0 # SCSI bus 210 1.34 leo zs0 at mainbus0 # Serial support through 8530 211 1.34 leo grfbus0 at mainbus0 # bitmapped display's 212 1.34 leo grfcc0 at grfbus0 # graphics driver 213 1.34 leo ite0 at grfcc0 # console 214 1.34 leo nvr0 at mainbus0 # nvram driver 215 1.34 leo 216 1.34 leo grfcc1 at grfbus0 # 2nd graphics driver 217 1.34 leo ite1 at grfcc1 # 2nd tty 218 1.34 leo grfcc2 at grfbus0 # 3rd graphics driver 219 1.34 leo ite2 at grfcc2 # 3rd tty 220 1.34 leo lp0 at mainbus0 # centronics printer 221 1.35 leo ser0 at mainbus0 # UART on first 68901 (ttyB0) 222 1.34 leo 223 1.34 leo wdc0 at mainbus0 # IDE-bus 224 1.34 leo wd* at wdc? channel ? drive ? 225 1.34 leo 226 1.47 atatat #ATAPI bus support 227 1.28 leo atapibus* at wdc? channel ? 228 1.28 leo 229 1.34 leo #ATAPI devices 230 1.41 lukem cd* at atapibus? drive ? # ATAPI CD-ROM drives 231 1.34 leo 232 1.34 leo #SCSI devices 233 1.34 leo sd* at scsibus? target ? lun ? # SCSI disk drives 234 1.34 leo st* at scsibus? target ? lun ? # SCSI tape drives 235 1.34 leo cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 236 1.34 leo 237 1.34 leo ch* at scsibus? target ? lun ? # SCSI autochangers 238 1.34 leo ss* at scsibus? target ? lun ? # SCSI scanners 239 1.34 leo se* at scsibus? target ? lun ? # SCSI ethernet 240 1.34 leo uk* at scsibus? target ? lun ? # SCSI unknown 241 1.34 leo 242
Indexes created Thu Mar 26 00:23:24 UTC 2026