FALCON revision 1.51
1 1.1 leo # 2 1.44 leo # $NetBSD: FALCON,v 1.51 2002/10/06 03:02:04 provos Exp $ 3 1.1 leo # 4 1.34 leo # This file was automatically created. Changes will be 5 1.34 leo # lost when running makeconf in this directory. 6 1.1 leo # 7 1.41 lukem # Created from: 8 1.49 leo # NetBSD: FALCON.in,v 1.6 2002/09/02 12:10:46 leo Exp $ 9 1.51 provos # NetBSD: GENERIC.in,v 1.26 2002/10/06 02:58:21 provos Exp $ 10 1.34 leo 11 1.34 leo #This configuration file is for a generic ATARI-Falcon 12 1.34 leo 13 1.34 leo #Define 'INSTALL_KERNEL' or 'INSTALLX_KERNEL' to generate a BOOT or 14 1.34 leo #BOOTX kernel respectively. 15 1.34 leo 16 1.49 leo #There is no possibility for physical network interfaces. Use the define 17 1.49 leo #below to turn off vlan, pppoe, bridge and NETATALK. 18 1.49 leo 19 1.34 leo #Generic atari 20 1.1 leo 21 1.12 leo include "arch/atari/conf/std.atari" 22 1.34 leo 23 1.47 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 1.47 atatat 25 1.34 leo #Add support for about 16 users. This variable is used to size 26 1.34 leo #various kernel structures. 27 1.34 leo 28 1.1 leo maxusers 16 29 1.1 leo 30 1.34 leo options HZ=64 # Set the clock-rate (48/64/96) 31 1.1 leo 32 1.34 leo #X11R6 related options 33 1.1 leo 34 1.21 lukem options UCONSOLE # Allow xconsole to work 35 1.10 leo 36 1.34 leo #Standard system options 37 1.34 leo options INSECURE # disable kernel security levels 38 1.34 leo #options NTP # NTP phase/frequency locked loop 39 1.34 leo 40 1.34 leo #(Co)processors this kernel should support 41 1.34 leo 42 1.34 leo options M68030 # support for 030 43 1.21 lukem options FPU_EMULATE # Support for MC68881/MC68882 emulator 44 1.10 leo 45 1.34 leo options M68040 # support for 040 46 1.34 leo options FPSP # 68040 Floatingpoint support 47 1.34 leo 48 1.34 leo #Networking options 49 1.34 leo 50 1.41 lukem options INET # IP + ICMP + TCP + UDP 51 1.34 leo 52 1.34 leo options INET6 # IPV6 53 1.34 leo #options IPSEC # IP security 54 1.34 leo #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 55 1.34 leo #options IPSEC_DEBUG # debug for IP security 56 1.41 lukem #options GATEWAY # packet forwarding 57 1.41 lukem #options MROUTING # IP multicast routing 58 1.41 lukem options NS # XNS 59 1.41 lukem #options NSIP # XNS tunneling over IP 60 1.41 lukem options ISO,TPIP # OSI 61 1.41 lukem #options EON # OSI tunneling over IP 62 1.41 lukem options CCITT,LLC,HDLC # X.25 63 1.41 lukem 64 1.41 lukem options PPP_BSDCOMP # BSD-Compress compression support for PPP 65 1.41 lukem options PPP_DEFLATE # Deflate compression support for PPP 66 1.41 lukem options PPP_FILTER # Active filter support for PPP (requires bpf) 67 1.34 leo 68 1.41 lukem options PFIL_HOOKS # pfil(9) packet filter hooks 69 1.41 lukem options IPFILTER_LOG # ipmon(8) log support 70 1.51 provos #options IPFILTER_DEFAULT_BLOCK # block packages by default 71 1.1 leo 72 1.39 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 73 1.39 abs 74 1.34 leo #File systems 75 1.18 thorpej file-system FFS # Berkeley fast file system 76 1.18 thorpej file-system MFS # Memory based filesystem 77 1.18 thorpej file-system KERNFS # Kernel parameter filesystem 78 1.18 thorpej file-system MSDOSFS # MSDOS filesystem 79 1.18 thorpej file-system CD9660 # ISO 9660 filesystem with Rock Ridge 80 1.1 leo 81 1.34 leo file-system NFS # Network File System client side code 82 1.34 leo file-system PROCFS # Process filesystem 83 1.34 leo file-system FDESC # /dev/fd 84 1.34 leo file-system NULLFS # Loopback filesystem 85 1.34 leo file-system OVERLAY # overlay filesystem 86 1.34 leo file-system UNION # union file system 87 1.34 leo file-system UMAPFS # null file system (with uid & gid remapping) 88 1.34 leo file-system PORTAL # portal file system 89 1.34 leo file-system EXT2FS # second extended file system (linux) 90 1.34 leo file-system LFS # log-structured file system 91 1.34 leo 92 1.34 leo #File system options 93 1.34 leo options QUOTA # Disk quotas for local disks 94 1.34 leo #options FFS_EI # FFS Endian Independant support 95 1.41 lukem options SOFTDEP # FFS soft updates support. 96 1.34 leo options NFSSERVER # Network File System server side code 97 1.34 leo #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 98 1.47 atatat #immutable) behave as system flags. 99 1.34 leo 100 1.34 leo #Misc. debugging options 101 1.34 leo 102 1.21 lukem options PANICWAIT # Require keystroke to dump/reboot 103 1.21 lukem options DDB # Kernel debugger 104 1.1 leo 105 1.34 leo options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 106 1.34 leo #options DEBUG # expensive debugging checks/support 107 1.34 leo 108 1.38 wiz #Compatibility options for various existing systems 109 1.34 leo 110 1.21 lukem options COMPAT_43 # 4.3 BSD compatible system calls (required) 111 1.21 lukem options COMPAT_10 # Compatibility to NetBSD1.0 112 1.21 lukem options COMPAT_11 # Compatibility to NetBSD1.1 113 1.21 lukem options COMPAT_12 # Compatibility to NetBSD1.2 114 1.25 kleink options COMPAT_13 # Compatibility to NetBSD1.3 115 1.29 augustss options COMPAT_14 # Compatibility to NetBSD1.4 116 1.1 leo 117 1.34 leo #options COMPAT_09 # has no meaning on the atari 118 1.34 leo #options COMPAT_SUNOS # Support to run Sun-3 executables 119 1.34 leo #options COMPAT_SVR4 # Support to run SVR4 executables 120 1.34 leo #options COMPAT_LINUX # Support to run Linux/m68k executables 121 1.39 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 122 1.34 leo 123 1.41 lukem options COMPAT_AOUT_M68K # Compatibility to a.out executables 124 1.41 lukem options EXEC_AOUT # a.out format executables 125 1.41 lukem 126 1.34 leo #Support for System V IPC facilities. 127 1.34 leo 128 1.34 leo options SYSVSHM # System V shared memory 129 1.34 leo options SYSVMSG # System V messages 130 1.34 leo options SYSVSEM # System V semaphores 131 1.40 leo #options SEMMNI=10 # number of semaphore identifiers 132 1.40 leo #options SEMUME=10 # max number of undo entries per proc. 133 1.40 leo #options SEMMNU=30 # number of undo structures in system 134 1.34 leo 135 1.34 leo #Support for various kernel options 136 1.34 leo 137 1.21 lukem options KTRACE # Add kernel tracing system call 138 1.51 provos options SYSTRACE # system call vetting via systrace(1) 139 1.21 lukem options DIAGNOSTIC # Add additional error checking code 140 1.50 lukem options USERCONF # userconf(4) support 141 1.44 leo #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 142 1.1 leo 143 1.34 leo #These options enable verbose messages for several subsystems. 144 1.34 leo #Warning, these may compile large string tables into the kernel! 145 1.34 leo 146 1.34 leo options SCSIVERBOSE # human readable SCSI error messages 147 1.34 leo 148 1.34 leo #Atari specific options 149 1.34 leo 150 1.34 leo #options KFONT_8x8 # Use 8x8 font instead of 8x16 151 1.34 leo options ST_POOL_SIZE=22 # smallest that allows TT-HIGH 152 1.34 leo 153 1.34 leo options FALCON_SCSI # SCSI-support for Falcon 154 1.21 lukem options FALCON_VIDEO # Graphics support for FALCON 155 1.34 leo 156 1.21 lukem options MEMORY_DISK_HOOKS # Boot RAM-disk 157 1.21 lukem options DISKLABEL_NBDA # NetBSD disklabels (required) 158 1.21 lukem options DISKLABEL_AHDI # NetBSD/AHDI disklabels 159 1.1 leo 160 1.34 leo options SERCONSOLE # modem1 console support 161 1.34 leo options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM 162 1.49 leo options MSGBUFSIZE=32768 # size of kernel msg. buffer 163 1.44 leo #options STATCLOCK # Separate {stat,prof}clock 164 1.34 leo 165 1.34 leo #Try linked commands on all targets 166 1.34 leo options TRY_SCSI_LINKED_COMMANDS=0x7f 167 1.34 leo 168 1.34 leo #Build one kernel that can boot from any disk. 169 1.34 leo 170 1.18 thorpej config netbsd root on ? type ? 171 1.1 leo 172 1.21 lukem pseudo-device sl # Slip 173 1.21 lukem pseudo-device ppp # ppp 174 1.46 bjh21 175 1.32 jdolecek pseudo-device pty # pseudo-terminals 176 1.21 lukem pseudo-device loop # Loopback network 177 1.21 lukem pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) 178 1.23 leo pseudo-device md 2 # Boot memory disk 179 1.1 leo 180 1.34 leo pseudo-device bpfilter 2 # berkeley packet filters 181 1.34 leo pseudo-device tun 2 # network tunnel 182 1.34 leo #pseudo-device gre 2 # generic L3 over IP tunnel 183 1.34 leo pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 184 1.34 leo #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 185 1.34 leo #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 186 1.49 leo 187 1.34 leo pseudo-device ccd 4 # concatenating disk driver 188 1.42 jdolecek pseudo-device raid 8 # RAIDframe disk driver 189 1.42 jdolecek options RAID_AUTOCONFIG # auto-configuration of RAID components 190 1.42 jdolecek #Options to enable various other RAIDframe RAID types. 191 1.42 jdolecek #options RF_INCLUDE_EVENODD=1 192 1.42 jdolecek #options RF_INCLUDE_RAID5_RS=1 193 1.42 jdolecek #options RF_INCLUDE_PARITYLOGGING=1 194 1.42 jdolecek #options RF_INCLUDE_CHAINDECLUSTER=1 195 1.42 jdolecek #options RF_INCLUDE_INTERDECLUSTER=1 196 1.42 jdolecek #options RF_INCLUDE_PARITY_DECLUSTERING=1 197 1.42 jdolecek #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 198 1.34 leo pseudo-device ipfilter # IP filtering device 199 1.34 leo pseudo-device rnd # /dev/random and in-kernel generator 200 1.48 lukem pseudo-device clockctl # user control of clock subsystem 201 1.34 leo 202 1.34 leo #Hardware options for GENERIC are in the various machine type specific files 203 1.34 leo 204 1.34 leo pseudo-device view 4 # View (graphics mapping) 205 1.34 leo 206 1.36 leo pseudo-device mouse 1 # mouse 207 1.36 leo 208 1.34 leo #The following sections describe various hardware options. 209 1.34 leo 210 1.34 leo ncrscsi0 at mainbus0 # NCR5380 SCSI driver 211 1.34 leo scsibus0 at ncrscsi0 # SCSI bus 212 1.34 leo zs0 at mainbus0 # Serial support through 8530 213 1.34 leo grfbus0 at mainbus0 # bitmapped display's 214 1.34 leo grfcc0 at grfbus0 # graphics driver 215 1.34 leo ite0 at grfcc0 # console 216 1.34 leo nvr0 at mainbus0 # nvram driver 217 1.34 leo 218 1.34 leo grfcc1 at grfbus0 # 2nd graphics driver 219 1.34 leo ite1 at grfcc1 # 2nd tty 220 1.34 leo grfcc2 at grfbus0 # 3rd graphics driver 221 1.34 leo ite2 at grfcc2 # 3rd tty 222 1.34 leo lp0 at mainbus0 # centronics printer 223 1.35 leo ser0 at mainbus0 # UART on first 68901 (ttyB0) 224 1.34 leo 225 1.34 leo wdc0 at mainbus0 # IDE-bus 226 1.34 leo wd* at wdc? channel ? drive ? 227 1.34 leo 228 1.47 atatat #ATAPI bus support 229 1.28 leo atapibus* at wdc? channel ? 230 1.28 leo 231 1.34 leo #ATAPI devices 232 1.41 lukem cd* at atapibus? drive ? # ATAPI CD-ROM drives 233 1.34 leo 234 1.34 leo #SCSI devices 235 1.34 leo sd* at scsibus? target ? lun ? # SCSI disk drives 236 1.34 leo st* at scsibus? target ? lun ? # SCSI tape drives 237 1.34 leo cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 238 1.34 leo 239 1.34 leo ch* at scsibus? target ? lun ? # SCSI autochangers 240 1.34 leo ss* at scsibus? target ? lun ? # SCSI scanners 241 1.34 leo se* at scsibus? target ? lun ? # SCSI ethernet 242 1.34 leo uk* at scsibus? target ? lun ? # SCSI unknown 243 1.34 leo 244
Indexes created Mon Oct 27 20:09:55 GMT 2025