MILAN-ISAIDE revision 1.10
1 # 2 # $NetBSD: MILAN-ISAIDE,v 1.10 2002/04/12 22:37:22 leo Exp $ 3 # 4 # This file was automatically created. Changes will be 5 # lost when running makeconf in this directory. 6 # 7 # Created from: 8 # NetBSD: MILAN.in,v 1.8 2001/11/20 11:29:41 lukem Exp $ 9 # NetBSD: GENERIC.in,v 1.17 2002/04/12 22:34:13 leo Exp $ 10 11 #This configuration file is for a generic Milan 12 13 #Generic atari 14 15 include "arch/atari/conf/std.milan" 16 17 #Add support for about 16 users. This variable is used to size 18 #various kernel structures. 19 20 maxusers 16 21 22 options HZ=64 # Set the clock-rate (48/64/96) 23 24 #X11R6 related options 25 26 options UCONSOLE # Allow xconsole to work 27 28 #Standard system options 29 options INSECURE # disable kernel security levels 30 #options NTP # NTP phase/frequency locked loop 31 32 #(Co)processors this kernel should support 33 34 options M68040 # support for 040 35 options M68060 # support for 060 36 options FPSP # 68040 Floatingpoint support 37 options M060SP # MC68060 software support (Required for 060) 38 39 #Networking options 40 41 options INET # IP + ICMP + TCP + UDP 42 43 options INET6 # IPV6 44 #options IPSEC # IP security 45 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 46 #options IPSEC_DEBUG # debug for IP security 47 #options GATEWAY # packet forwarding 48 #options MROUTING # IP multicast routing 49 options NS # XNS 50 #options NSIP # XNS tunneling over IP 51 options ISO,TPIP # OSI 52 #options EON # OSI tunneling over IP 53 options CCITT,LLC,HDLC # X.25 54 options NETATALK # AppleTalk networking protocols 55 56 options PPP_BSDCOMP # BSD-Compress compression support for PPP 57 options PPP_DEFLATE # Deflate compression support for PPP 58 options PPP_FILTER # Active filter support for PPP (requires bpf) 59 60 options PFIL_HOOKS # pfil(9) packet filter hooks 61 options IPFILTER_LOG # ipmon(8) log support 62 #options IPFILTER_DEFAULT_BLOCK # block packages by default 63 64 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 65 66 #File systems 67 file-system FFS # Berkeley fast file system 68 file-system MFS # Memory based filesystem 69 file-system KERNFS # Kernel parameter filesystem 70 file-system MSDOSFS # MSDOS filesystem 71 file-system CD9660 # ISO 9660 filesystem with Rock Ridge 72 73 file-system NFS # Network File System client side code 74 file-system PROCFS # Process filesystem 75 file-system FDESC # /dev/fd 76 file-system NULLFS # Loopback filesystem 77 file-system OVERLAY # overlay filesystem 78 file-system UNION # union file system 79 file-system UMAPFS # null file system (with uid & gid remapping) 80 file-system PORTAL # portal file system 81 file-system EXT2FS # second extended file system (linux) 82 file-system LFS # log-structured file system 83 84 #File system options 85 options QUOTA # Disk quotas for local disks 86 #options FFS_EI # FFS Endian Independant support 87 options SOFTDEP # FFS soft updates support. 88 options NFSSERVER # Network File System server side code 89 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 90 # immutable) behave as system flags. 91 92 #Misc. debugging options 93 94 options PANICWAIT # Require keystroke to dump/reboot 95 options DDB # Kernel debugger 96 97 options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 98 #options DEBUG # expensive debugging checks/support 99 100 #Compatibility options for various existing systems 101 102 options COMPAT_43 # 4.3 BSD compatible system calls (required) 103 options COMPAT_10 # Compatibility to NetBSD1.0 104 options COMPAT_11 # Compatibility to NetBSD1.1 105 options COMPAT_12 # Compatibility to NetBSD1.2 106 options COMPAT_13 # Compatibility to NetBSD1.3 107 options COMPAT_14 # Compatibility to NetBSD1.4 108 109 #options COMPAT_09 # has no meaning on the atari 110 #options COMPAT_SUNOS # Support to run Sun-3 executables 111 #options COMPAT_SVR4 # Support to run SVR4 executables 112 #options COMPAT_LINUX # Support to run Linux/m68k executables 113 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 114 115 options COMPAT_AOUT_M68K # Compatibility to a.out executables 116 options EXEC_AOUT # a.out format executables 117 118 #Support for System V IPC facilities. 119 120 options SYSVSHM # System V shared memory 121 options SYSVMSG # System V messages 122 options SYSVSEM # System V semaphores 123 #options SEMMNI=10 # number of semaphore identifiers 124 #options SEMUME=10 # max number of undo entries per proc. 125 #options SEMMNU=30 # number of undo structures in system 126 127 #Support for various kernel options 128 129 options KTRACE # Add kernel tracing system call 130 options DIAGNOSTIC # Add additional error checking code 131 #options USERCONF # userconf(4) support 132 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 133 134 #These options enable verbose messages for several subsystems. 135 #Warning, these may compile large string tables into the kernel! 136 137 options SCSIVERBOSE # human readable SCSI error messages 138 139 options MIIVERBOSE # verbose PHY autoconfig messages 140 options PCIVERBOSE # verbose PCI device autoconfig messages 141 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 142 143 #Atari specific options 144 145 #options KFONT_8x8 # Use 8x8 font instead of 8x16 146 options ST_POOL_SIZE=22 # smallest that allows TT-HIGH 147 148 options MEMORY_DISK_HOOKS # Boot RAM-disk 149 options DISKLABEL_NBDA # NetBSD disklabels (required) 150 options DISKLABEL_AHDI # NetBSD/AHDI disklabels 151 152 options SERCONSOLE # modem1 console support 153 options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM 154 #options MSGBUFSIZE=32768 # size of kernel msg. buffer 155 #options STATCLOCK # Separate {stat,prof}clock 156 157 #Try linked commands on all targets 158 options TRY_SCSI_LINKED_COMMANDS=0x7f 159 160 #Build one kernel that can boot from any disk. 161 162 config netbsd root on ? type ? 163 164 pseudo-device sl # Slip 165 pseudo-device ppp # ppp 166 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 167 pseudo-device pty # pseudo-terminals 168 pseudo-device loop # Loopback network 169 pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) 170 pseudo-device md 2 # Boot memory disk 171 172 pseudo-device bpfilter 2 # berkeley packet filters 173 pseudo-device tun 2 # network tunnel 174 #pseudo-device gre 2 # generic L3 over IP tunnel 175 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 176 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 177 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 178 pseudo-device vlan # IEEE 802.1q encapsulation 179 pseudo-device bridge # simple inter-network bridging 180 pseudo-device ccd 4 # concatenating disk driver 181 pseudo-device raid 8 # RAIDframe disk driver 182 options RAID_AUTOCONFIG # auto-configuration of RAID components 183 #Options to enable various other RAIDframe RAID types. 184 #options RF_INCLUDE_EVENODD=1 185 #options RF_INCLUDE_RAID5_RS=1 186 #options RF_INCLUDE_PARITYLOGGING=1 187 #options RF_INCLUDE_CHAINDECLUSTER=1 188 #options RF_INCLUDE_INTERDECLUSTER=1 189 #options RF_INCLUDE_PARITY_DECLUSTERING=1 190 #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 191 pseudo-device ipfilter # IP filtering device 192 pseudo-device rnd # /dev/random and in-kernel generator 193 194 #MII/PHY support 195 exphy* at mii? phy ? # 3Com internal PHYs 196 inphy* at mii? phy ? # Intel 82555 PHYs 197 iophy* at mii? phy ? # Intel 82553 PHYs 198 ukphy* at mii? phy ? # generic unknown PHYs 199 200 #PCI network interfaces 201 #If unsure, check the port-atari page for tested cards. 202 ep* at pci? dev ? function ? # 3Com 3c59x 203 ex* at pci? dev ? function ? # 3Com 90x[BC] 204 fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B 205 206 #This is the only tested audio card at the moment. 207 208 eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive 209 audio* at eso? 210 211 #Hardware options for GENERIC are in the various machine type specific files 212 213 #For the moment, the MILAN will be the only one to use wscons, so define 214 #the wscons options here too for the moment. 215 #wscons options 216 217 #builtin terminal emulations 218 #options WSEMUL_SUN # sun terminal emulation 219 options WSEMUL_VT100 # VT100 / VT220 emulation 220 #different kernel output - see dev/wscons/wsdisplayvar.h 221 #XXX: Since the Milan VGA works in monochrome for the moment, _only_ 222 #use black and white here! 223 options WS_KERNEL_FG=WSCOL_WHITE 224 options WS_KERNEL_BG=WSCOL_BLACK 225 226 #compatibility to other console drivers 227 #options WSDISPLAY_COMPAT_USL # VT handling 228 #options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 229 230 #see dev/pckbc/wskbdmap_mfii.c for implemented layouts 231 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 232 #allocate a number of virtual screens at autoconfiguration time 233 options WSDISPLAY_DEFAULTSCREENS=4 234 #use a large software cursor that doesn't blink 235 options PCDISPLAY_SOFTCURSOR 236 #modify the screen type of the console; defaults to "80x25" 237 #options VGA_CONSOLE_SCREENTYPE="\"80x25\"" 238 239 #The following sections describe various hardware options. 240 241 isabus0 at mainbus0 # ISA-bus 242 isa0 at isabus0 243 pcibus0 at mainbus0 # PCI-bus 244 pci0 at pcibus0 245 ser0 at mainbus0 246 fdcisa0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy contr. 247 fdisa0 at fdcisa0 drive 0 248 249 #Ok, the stuff below requires some explanation... 250 #Initially, when Atari started with IDE on the Falcon, they decided to 251 #swap the bytelanes on the IDE controller. So all data on the disk was 252 #byteswapped and all CDROM drivers had to byteswap the data to make 253 #this nice idea work... To remain compatible with the 'current' drivers, 254 #this scheme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan 255 #however, the change was reverted. But... now the hardware is connected to 256 #a little endian (ISA) bus, in PIO mode this is essentially the same as 257 #swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode 258 #provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data 259 #on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER 260 #developers have thought up a solution, you can make a byteswapped disk 261 #during the partioning with HDDRIVER and TOS supports booting from it! 262 #Ok, now you have to choose: 263 #- If _none_ of your disks are marked byteswapped by HDDRIVER, choose 264 #the 1 version. 265 #- If _all_ of your disks are byteswapped, use the MILAN_PCIIDE version 266 #The is no way to mix things! 267 268 #wdc on ISA with flags = WDC_OPTIONS_ATA_NOSTREAM! 269 wdc0 at isa? port 0x1f0 irq 14 flags 0x04 # 1st IDE controller 270 wdc1 at isa? port 0x170 irq 15 flags 0x04 # 2nd IDE controller 271 wd* at wdc? channel ? drive ? 272 atapibus* at wdc? channel ? # ATAPI bus support 273 274 #The Milan uses wscons 275 #XXX without the __HAVE_NWSCONS option, the keyboard won't work... 276 277 options __HAVE_NWSCONS 278 vga0 at pci? dev ? function ? # a PCI VGA card 279 wsdisplay* at vga? console ? # as a wscons console 280 pckbc0 at isa? # PC keyboard controller 281 pckbd* at pckbc? # PC keyboard 282 wskbd* at pckbd? console ? # wscons keyboard 283 284 #ATAPI devices 285 cd* at atapibus? drive ? # ATAPI CD-ROM drives 286
Indexes created Fri Oct 03 02:09:57 GMT 2025