MILAN-ISAIDE revision 1.2
1# 2# $NetBSD: MILAN-ISAIDE,v 1.2 2001/06/11 01:50:53 wiz Exp $ 3# 4# This file was automatically created. Changes will be 5# lost when running makeconf in this directory. 6# 7# Created from: 8# NetBSD: MILAN.in,v 1.6 2001/06/07 07:56:57 leo Exp $ 9# NetBSD: GENERIC.in,v 1.2 2001/04/10 06:46:01 leo Exp $ 10 11#This configuration file is for a generic Milan 12 13#Generic atari 14 15include "arch/atari/conf/std.milan" 16 17#ident "GENERIC-$Revision: 1.2 $" 18 19#Add support for about 16 users. This variable is used to size 20#various kernel structures. 21 22maxusers 16 23 24options HZ=64 # Set the clock-rate (48/64/96) 25 26#X11R6 related options 27 28options UCONSOLE # Allow xconsole to work 29 30#Standard system options 31options INSECURE # disable kernel security levels 32#options NTP # NTP phase/frequency locked loop 33 34#(Co)processors this kernel should support 35 36options M68040 # support for 040 37options M68060 # support for 060 38options FPSP # 68040 Floatingpoint support 39options M060SP # MC68060 software support (Required for 060) 40 41#Networking options 42 43options INET # IP + ICMP + TCP + UDP 44 45options INET6 # IPV6 46#options IPSEC # IP security 47#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 48#options IPSEC_DEBUG # debug for IP security 49#options GATEWAY # packet forwarding 50#options MROUTING # IP multicast routing 51options NS # XNS 52#options NSIP # XNS tunneling over IP 53options ISO,TPIP # OSI 54#options EON # OSI tunneling over IP 55options CCITT,LLC,HDLC # X.25 56options NETATALK # AppleTalk networking protocols 57 58options PPP_BSDCOMP # BSD-Compress compression support for PPP 59options PPP_DEFLATE # Deflate compression support for PPP 60options PPP_FILTER # Active filter support for PPP (requires bpf) 61 62options PFIL_HOOKS # pfil(9) packet filter hooks 63options IPFILTER_LOG # ipmon(8) log support 64#options IPFILTER_DEFAULT_BLOCK # block packages by default 65 66#File systems 67file-system FFS # Berkeley fast file system 68file-system MFS # Memory based filesystem 69file-system KERNFS # Kernel parameter filesystem 70file-system MSDOSFS # MSDOS filesystem 71file-system CD9660 # ISO 9660 filesystem with Rock Ridge 72 73file-system NFS # Network File System client side code 74file-system PROCFS # Process filesystem 75file-system FDESC # /dev/fd 76file-system NULLFS # Loopback filesystem 77file-system OVERLAY # overlay filesystem 78file-system UNION # union file system 79file-system UMAPFS # null file system (with uid & gid remapping) 80file-system PORTAL # portal file system 81file-system EXT2FS # second extended file system (linux) 82file-system LFS # log-structured file system 83 84#File system options 85options QUOTA # Disk quotas for local disks 86#options FFS_EI # FFS Endian Independant support 87options SOFTDEP # FFS soft updates support. 88options NFSSERVER # Network File System server side code 89#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 90 #immutable) behave as system flags. 91 92#Misc. debugging options 93 94options PANICWAIT # Require keystroke to dump/reboot 95options DDB # Kernel debugger 96 97options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 98#options DEBUG # expensive debugging checks/support 99 100#Compatibility options for various existing systems 101 102options COMPAT_43 # 4.3 BSD compatible system calls (required) 103options COMPAT_10 # Compatibility to NetBSD1.0 104options COMPAT_11 # Compatibility to NetBSD1.1 105options COMPAT_12 # Compatibility to NetBSD1.2 106options COMPAT_13 # Compatibility to NetBSD1.3 107options COMPAT_14 # Compatibility to NetBSD1.4 108 109#options COMPAT_09 # has no meaning on the atari 110#options COMPAT_SUNOS # Support to run Sun-3 executables 111#options COMPAT_SVR4 # Support to run SVR4 executables 112#options TCP_COMPAT_42 # Disable UDP checksums (not needed) 113#options COMPAT_LINUX # Support to run Linux/m68k executables 114#options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 115 116#Support for System V IPC facilities. 117 118options SYSVSHM # System V shared memory 119options SYSVMSG # System V messages 120options SYSVSEM # System V semaphores 121 122#Support for various kernel options 123 124options KTRACE # Add kernel tracing system call 125options DIAGNOSTIC # Add additional error checking code 126 127#These options enable verbose messages for several subsystems. 128#Warning, these may compile large string tables into the kernel! 129 130options SCSIVERBOSE # human readable SCSI error messages 131 132options PCIVERBOSE # verbose PCI device autoconfig messages 133#options PCI_CONFIG_DUMP # verbosely dump PCI config space 134 135#Atari specific options 136 137#options KFONT_8x8 # Use 8x8 font instead of 8x16 138options ST_POOL_SIZE=22 # smallest that allows TT-HIGH 139 140options MEMORY_DISK_HOOKS # Boot RAM-disk 141options DISKLABEL_NBDA # NetBSD disklabels (required) 142options DISKLABEL_AHDI # NetBSD/AHDI disklabels 143 144options SERCONSOLE # modem1 console support 145options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM 146options STATCLOCK # Separate {stat,prof}clock 147 148#Try linked commands on all targets 149options TRY_SCSI_LINKED_COMMANDS=0x7f 150 151#Build one kernel that can boot from any disk. 152 153config netbsd root on ? type ? 154 155pseudo-device sl # Slip 156pseudo-device ppp # ppp 157pseudo-device pty # pseudo-terminals 158pseudo-device loop # Loopback network 159pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) 160pseudo-device md 2 # Boot memory disk 161 162pseudo-device bpfilter 2 # berkeley packet filters 163pseudo-device tun 2 # network tunnel 164#pseudo-device gre 2 # generic L3 over IP tunnel 165pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 166#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 167#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 168pseudo-device vlan # IEEE 802.1q encapsulation 169pseudo-device ccd 4 # concatenating disk driver 170#pseudo-device raid 4 # RAIDframe disk driver 171#options RAID_AUTOCONFIG # auto-configuration of RAID components 172pseudo-device ipfilter # IP filtering device 173pseudo-device rnd # /dev/random and in-kernel generator 174 175#Hardware options for GENERIC are in the various machine type specific files 176 177#For the moment, the MILAN will be the only one to use wscons, so define 178#the wscons options here too for the moment. 179#wscons options 180 181#builtin terminal emulations 182#options WSEMUL_SUN # sun terminal emulation 183options WSEMUL_VT100 # VT100 / VT220 emulation 184#different kernel output - see dev/wscons/wsdisplayvar.h 185#XXX: Since the Milan VGA works in monochrome for the moment, _only_ 186#use black and white here! 187options WS_KERNEL_FG=WSCOL_WHITE 188options WS_KERNEL_BG=WSCOL_BLACK 189 190#compatibility to other console drivers 191#options WSDISPLAY_COMPAT_USL # VT handling 192#options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 193 194#see dev/pckbc/wskbdmap_mfii.c for implemented layouts 195#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 196#allocate a number of virtual screens at autoconfiguration time 197options WSDISPLAY_DEFAULTSCREENS=4 198#use a large software cursor that doesn't blink 199options PCDISPLAY_SOFTCURSOR 200#modify the screen type of the console; defaults to "80x25" 201#options VGA_CONSOLE_SCREENTYPE="\"80x25\"" 202 203#The following sections describe various hardware options. 204 205isabus0 at mainbus0 # ISA-bus 206isa0 at isabus0 207pcibus0 at mainbus0 # PCI-bus 208pci0 at pcibus0 209ser0 at mainbus0 210fdcisa0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy contr. 211fdisa0 at fdcisa0 drive 0 212 213#Ok, the stuff below requires some explanation... 214#Initially, when Atari started with IDE on the Falcon, they decided to 215#swap the bytelanes on the IDE controller. So all data on the disk was 216#byteswapped and all CDROM drivers had to byteswap the data to make 217#this nice idea work... To remain compatible with the 'current' drivers, 218#this sceme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan 219#however, the change was reverted. But... now the hardware is connected to 220#a little endian (ISA) bus, in PIO mode this is essentially the same as 221#swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode 222#provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data 223# on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER 224#developers have thought up a solution, you can make a byteswapped disk 225#during the partioning with HDDRIVER and TOS supports booting from it! 226#Ok, now you have to choose: 227#- If _none_ of your disks are marked byteswapped by HDDRIVER, choose 228#the 1 version. 229#- If _all_ of your disks are byteswapped, use the MILAN_PCIIDE version 230#The is no way to mix things! 231 232#wdc on ISA with flags = WDC_OPTIONS_ATA_NOSTREAM! 233wdc0 at isa? port 0x1f0 irq 14 flags 0x04 # 1st IDE controller 234wdc1 at isa? port 0x170 irq 15 flags 0x04 # 2nd IDE controller 235wd* at wdc? channel ? drive ? 236atapibus* at wdc? channel ? # ATAPI bus support 237 238#The Milan uses wscons 239#XXX without the __HAVE_NWSCONS option, the keyboard won't work... 240# 241options __HAVE_NWSCONS 242vga0 at pci? dev ? function ? # a PCI VGA card 243wsdisplay* at vga? console ? # as a wscons console 244pckbc0 at isa? # PC keyboard controller 245pckbd* at pckbc? # PC keyboard 246wskbd* at pckbd? console ? # wscons keyboard 247 248#ATAPI devices 249cd* at atapibus? drive ? # ATAPI CD-ROM drives 250