MILAN-ISAIDE revision 1.27
1# 2# $NetBSD: MILAN-ISAIDE,v 1.27 2003/10/08 11:53:10 bouyer Exp $ 3# 4# This file was automatically created. Changes will be 5# lost when running makeconf in this directory. 6# 7# Created from: 8# NetBSD: MILAN.in,v 1.13 2003/10/08 11:52:50 bouyer Exp $ 9# NetBSD: GENERIC.in,v 1.33 2003/09/22 14:11:16 cl Exp $ 10 11#This configuration file is for a generic Milan 12 13#Generic atari 14 15include "arch/atari/conf/std.milan" 16 17options INCLUDE_CONFIG_FILE # embed config file in kernel binary 18 19#Add support for about 16 users. This variable is used to size 20#various kernel structures. 21 22maxusers 16 23 24options HZ=64 # Set the clock-rate (48/64/96) 25 26#Standard system options 27options INSECURE # disable kernel security levels 28#options NTP # NTP phase/frequency locked loop 29 30#Enable experimental buffer queue strategy for better responsiveness under 31#high disk I/O load. Use it with caution - it's not proven to be stable yet. 32#options NEW_BUFQ_STRATEGY 33 34#(Co)processors this kernel should support 35 36options M68040 # support for 040 37options M68060 # support for 060 38options FPSP # 68040 Floatingpoint support 39options M060SP # MC68060 software support (Required for 060) 40 41#Networking options 42 43options INET # IP + ICMP + TCP + UDP 44 45options INET6 # IPV6 46#options IPSEC # IP security 47#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 48#options IPSEC_DEBUG # debug for IP security 49#options GATEWAY # packet forwarding 50#options MROUTING # IP multicast routing 51options NS # XNS 52#options NSIP # XNS tunneling over IP 53options ISO,TPIP # OSI 54#options EON # OSI tunneling over IP 55options CCITT,LLC,HDLC # X.25 56 57options NETATALK # AppleTalk networking protocols 58 59options PPP_BSDCOMP # BSD-Compress compression support for PPP 60options PPP_DEFLATE # Deflate compression support for PPP 61options PPP_FILTER # Active filter support for PPP (requires bpf) 62 63options PFIL_HOOKS # pfil(9) packet filter hooks 64options IPFILTER_LOG # ipmon(8) log support 65#options IPFILTER_DEFAULT_BLOCK # block packages by default 66 67#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 68 69#File systems 70file-system FFS # Berkeley fast file system 71file-system MFS # Memory based filesystem 72file-system KERNFS # Kernel parameter filesystem 73file-system MSDOSFS # MSDOS filesystem 74file-system CD9660 # ISO 9660 filesystem with Rock Ridge 75 76file-system NFS # Network File System client side code 77file-system PROCFS # Process filesystem 78file-system FDESC # /dev/fd 79file-system NULLFS # Loopback filesystem 80file-system OVERLAY # overlay filesystem 81file-system UNION # union file system 82file-system UMAPFS # null file system (with uid & gid remapping) 83file-system PORTAL # portal file system 84file-system EXT2FS # second extended file system (linux) 85file-system LFS # log-structured file system 86 87#File system options 88options QUOTA # Disk quotas for local disks 89#options FFS_EI # FFS Endian Independant support 90options SOFTDEP # FFS soft updates support. 91options NFSSERVER # Network File System server side code 92#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 93 #immutable) behave as system flags. 94 95#Misc. debugging options 96 97options PANICWAIT # Require keystroke to dump/reboot 98options DDB # Kernel debugger 99 100options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 101#options DEBUG # expensive debugging checks/support 102 103#Compatibility options for various existing systems 104 105options COMPAT_43 # 4.3 BSD compatible system calls (required) 106options COMPAT_10 # Compatibility to NetBSD1.0 107options COMPAT_11 # Compatibility to NetBSD1.1 108options COMPAT_12 # Compatibility to NetBSD1.2 109options COMPAT_13 # Compatibility to NetBSD1.3 110options COMPAT_14 # Compatibility to NetBSD1.4 111options COMPAT_15 # Compatibility to NetBSD1.5 112options COMPAT_16 # Compatibility to NetBSD1.6 113 114#options COMPAT_09 # has no meaning on the atari 115#options COMPAT_SUNOS # Support to run Sun-3 executables 116#options COMPAT_SVR4 # Support to run SVR4 executables 117#options COMPAT_LINUX # Support to run Linux/m68k executables 118#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 119 120options COMPAT_AOUT_M68K # Compatibility to a.out executables 121options EXEC_AOUT # a.out format executables 122 123#Support for System V IPC facilities. 124 125options SYSVSHM # System V shared memory 126options SYSVMSG # System V messages 127options SYSVSEM # System V semaphores 128#options SEMMNI=10 # number of semaphore identifiers 129#options SEMUME=10 # max number of undo entries per proc. 130#options SEMMNU=30 # number of undo structures in system 131 132#Support for various kernel options 133 134options KTRACE # Add kernel tracing system call 135options SYSTRACE # system call vetting via systrace(1) 136options DIAGNOSTIC # Add additional error checking code 137options USERCONF # userconf(4) support 138#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 139 140#These options enable verbose messages for several subsystems. 141#Warning, these may compile large string tables into the kernel! 142 143options SCSIVERBOSE # human readable SCSI error messages 144 145options MIIVERBOSE # verbose PHY autoconfig messages 146options PCIVERBOSE # verbose PCI device autoconfig messages 147#options PCI_CONFIG_DUMP # verbosely dump PCI config space 148 149#Atari specific options 150 151#options KFONT_8x8 # Use 8x8 font instead of 8x16 152options ST_POOL_SIZE=22 # smallest that allows TT-HIGH 153 154options MEMORY_DISK_HOOKS # Boot RAM-disk 155options DISKLABEL_NBDA # NetBSD disklabels (required) 156options DISKLABEL_AHDI # NetBSD/AHDI disklabels 157 158options SERCONSOLE # modem1 console support 159options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM 160options MSGBUFSIZE=32768 # size of kernel msg. buffer 161#options STATCLOCK # Separate {stat,prof}clock 162 163#Try linked commands on all targets 164options TRY_SCSI_LINKED_COMMANDS=0x7f 165 166#Build one kernel that can boot from any disk. 167 168config netbsd root on ? type ? 169 170pseudo-device sl # Slip 171pseudo-device ppp # ppp 172 173pseudo-device pppoe # PPP over Ethernet (RFC 2516) 174 175pseudo-device pty # pseudo-terminals 176pseudo-device loop # Loopback network 177pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) 178pseudo-device md 3 # Boot memory disk 179 180pseudo-device bpfilter 2 # berkeley packet filters 181pseudo-device tun 2 # network tunnel 182#pseudo-device gre 2 # generic L3 over IP tunnel 183pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 184#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 185#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 186 187pseudo-device vlan # IEEE 802.1q encapsulation 188pseudo-device bridge # simple inter-network bridging 189 190pseudo-device ccd 4 # concatenating disk driver 191#pseudo-device cgd 4 # cryptographic disk driver 192pseudo-device raid 8 # RAIDframe disk driver 193options RAID_AUTOCONFIG # auto-configuration of RAID components 194#Options to enable various other RAIDframe RAID types. 195#options RF_INCLUDE_EVENODD=1 196#options RF_INCLUDE_RAID5_RS=1 197#options RF_INCLUDE_PARITYLOGGING=1 198#options RF_INCLUDE_CHAINDECLUSTER=1 199#options RF_INCLUDE_INTERDECLUSTER=1 200#options RF_INCLUDE_PARITY_DECLUSTERING=1 201#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 202pseudo-device ipfilter # IP filtering device 203pseudo-device rnd # /dev/random and in-kernel generator 204pseudo-device clockctl # user control of clock subsystem 205 206#MII/PHY support 207exphy* at mii? phy ? # 3Com internal PHYs 208inphy* at mii? phy ? # Intel 82555 PHYs 209iophy* at mii? phy ? # Intel 82553 PHYs 210ukphy* at mii? phy ? # generic unknown PHYs 211 212#PCI network interfaces 213#If unsure, check the port-atari page for tested cards. 214ep* at pci? dev ? function ? # 3Com 3c59x 215fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B 216 217#This is the only tested audio card at the moment. 218 219eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive 220audio* at eso? 221 222#Hardware options for GENERIC are in the various machine type specific files 223 224#For the moment, the MILAN will be the only one to use wscons, so define 225#the wscons options here too for the moment. 226#wscons options 227 228#builtin terminal emulations 229#options WSEMUL_SUN # sun terminal emulation 230options WSEMUL_VT100 # VT100 / VT220 emulation 231#different kernel output - see dev/wscons/wsdisplayvar.h 232#XXX: Since the Milan VGA works in monochrome for the moment, _only_ 233#use black and white here! 234options WS_KERNEL_FG=WSCOL_WHITE 235options WS_KERNEL_BG=WSCOL_BLACK 236 237#compatibility to other console drivers 238#options WSDISPLAY_COMPAT_USL # VT handling 239#options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 240 241#see dev/pckbc/wskbdmap_mfii.c for implemented layouts 242#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 243#allocate a number of virtual screens at autoconfiguration time 244options WSDISPLAY_DEFAULTSCREENS=4 245#use a large software cursor that doesn't blink 246options PCDISPLAY_SOFTCURSOR 247#modify the screen type of the console; defaults to "80x25" 248#options VGA_CONSOLE_SCREENTYPE="\"80x25\"" 249 250#The following sections describe various hardware options. 251 252isab0 at mainbus0 # ISA-bus 253isa0 at isab0 254pcib0 at mainbus0 # PCI-bus 255pci0 at pcib0 256nvr0 at mainbus0 # nvram driver 257ser0 at mainbus0 258fdcisa0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy contr. 259fdisa0 at fdcisa0 drive 0 260 261#Ok, the stuff below requires some explanation... 262#Initially, when Atari started with IDE on the Falcon, they decided to 263#swap the bytelanes on the IDE controller. So all data on the disk was 264#byteswapped and all CDROM drivers had to byteswap the data to make 265#this nice idea work... To remain compatible with the 'current' drivers, 266#this scheme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan 267#however, the change was reverted. But... now the hardware is connected to 268#a little endian (ISA) bus, in PIO mode this is essentially the same as 269#swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode 270#provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data 271# on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER 272#developers have thought up a solution, you can make a byteswapped disk 273#during the partioning with HDDRIVER and TOS supports booting from it! 274#Ok, now you have to choose: 275#- If _none_ of your disks are marked byteswapped by HDDRIVER, choose 276#the MILAN-ISAIDE version. 277#- If _all_ of your disks are byteswapped, use the MILAN-PCIIDE version 278#The is no way to mix things! 279 280#wdc on ISA with flags = WDC_OPTIONS_ATA_NOSTREAM! 281wdc0 at isa? port 0x1f0 irq 14 flags 0x04 # 1st IDE controller 282wdc1 at isa? port 0x170 irq 15 flags 0x04 # 2nd IDE controller 283atabus* at wdc? channel ? 284 285#The Milan uses wscons 286#XXX without the __HAVE_NWSCONS option, the keyboard won't work... 287# 288options __HAVE_NWSCONS 289vga0 at pci? dev ? function ? # a PCI VGA card 290wsdisplay* at vga? console ? # as a wscons console 291pckbc0 at isa? # PC keyboard controller 292pckbd* at pckbc? # PC keyboard 293wskbd* at pckbd? console ? # wscons keyboard 294 295#ATA devices 296wd* at atabus? drive ? 297atapibus* at atabus? # ATAPI bus support 298#ATAPI devices 299cd* at atapibus? drive ? # ATAPI CD-ROM drives 300