MILAN-ISAIDE revision 1.3
1 # 2 # $NetBSD: MILAN-ISAIDE,v 1.3 2001/07/08 16:34:03 abs Exp $ 3 # 4 # This file was automatically created. Changes will be 5 # lost when running makeconf in this directory. 6 # 7 # Created from: 8 # NetBSD: MILAN.in,v 1.6 2001/06/07 07:56:57 leo Exp $ 9 # NetBSD: GENERIC.in,v 1.4 2001/07/08 16:32:15 abs Exp $ 10 11 #This configuration file is for a generic Milan 12 13 #Generic atari 14 15 include "arch/atari/conf/std.milan" 16 17 #ident "GENERIC-$Revision: 1.3 $" 18 19 #Add support for about 16 users. This variable is used to size 20 #various kernel structures. 21 22 maxusers 16 23 24 options HZ=64 # Set the clock-rate (48/64/96) 25 26 #X11R6 related options 27 28 options UCONSOLE # Allow xconsole to work 29 30 #Standard system options 31 options INSECURE # disable kernel security levels 32 #options NTP # NTP phase/frequency locked loop 33 34 #(Co)processors this kernel should support 35 36 options M68040 # support for 040 37 options M68060 # support for 060 38 options FPSP # 68040 Floatingpoint support 39 options M060SP # MC68060 software support (Required for 060) 40 41 #Networking options 42 43 options INET # IP + ICMP + TCP + UDP 44 45 options INET6 # IPV6 46 #options IPSEC # IP security 47 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 48 #options IPSEC_DEBUG # debug for IP security 49 #options GATEWAY # packet forwarding 50 #options MROUTING # IP multicast routing 51 options NS # XNS 52 #options NSIP # XNS tunneling over IP 53 options ISO,TPIP # OSI 54 #options EON # OSI tunneling over IP 55 options CCITT,LLC,HDLC # X.25 56 options NETATALK # AppleTalk networking protocols 57 58 options PPP_BSDCOMP # BSD-Compress compression support for PPP 59 options PPP_DEFLATE # Deflate compression support for PPP 60 options PPP_FILTER # Active filter support for PPP (requires bpf) 61 62 options PFIL_HOOKS # pfil(9) packet filter hooks 63 options IPFILTER_LOG # ipmon(8) log support 64 #options IPFILTER_DEFAULT_BLOCK # block packages by default 65 66 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 67 68 #File systems 69 file-system FFS # Berkeley fast file system 70 file-system MFS # Memory based filesystem 71 file-system KERNFS # Kernel parameter filesystem 72 file-system MSDOSFS # MSDOS filesystem 73 file-system CD9660 # ISO 9660 filesystem with Rock Ridge 74 75 file-system NFS # Network File System client side code 76 file-system PROCFS # Process filesystem 77 file-system FDESC # /dev/fd 78 file-system NULLFS # Loopback filesystem 79 file-system OVERLAY # overlay filesystem 80 file-system UNION # union file system 81 file-system UMAPFS # null file system (with uid & gid remapping) 82 file-system PORTAL # portal file system 83 file-system EXT2FS # second extended file system (linux) 84 file-system LFS # log-structured file system 85 86 #File system options 87 options QUOTA # Disk quotas for local disks 88 #options FFS_EI # FFS Endian Independant support 89 options SOFTDEP # FFS soft updates support. 90 options NFSSERVER # Network File System server side code 91 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 92 # immutable) behave as system flags. 93 94 #Misc. debugging options 95 96 options PANICWAIT # Require keystroke to dump/reboot 97 options DDB # Kernel debugger 98 99 options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 100 #options DEBUG # expensive debugging checks/support 101 102 #Compatibility options for various existing systems 103 104 options COMPAT_43 # 4.3 BSD compatible system calls (required) 105 options COMPAT_10 # Compatibility to NetBSD1.0 106 options COMPAT_11 # Compatibility to NetBSD1.1 107 options COMPAT_12 # Compatibility to NetBSD1.2 108 options COMPAT_13 # Compatibility to NetBSD1.3 109 options COMPAT_14 # Compatibility to NetBSD1.4 110 111 #options COMPAT_09 # has no meaning on the atari 112 #options COMPAT_SUNOS # Support to run Sun-3 executables 113 #options COMPAT_SVR4 # Support to run SVR4 executables 114 #options COMPAT_LINUX # Support to run Linux/m68k executables 115 #options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 116 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 117 118 #Support for System V IPC facilities. 119 120 options SYSVSHM # System V shared memory 121 options SYSVMSG # System V messages 122 options SYSVSEM # System V semaphores 123 124 #Support for various kernel options 125 126 options KTRACE # Add kernel tracing system call 127 options DIAGNOSTIC # Add additional error checking code 128 129 #These options enable verbose messages for several subsystems. 130 #Warning, these may compile large string tables into the kernel! 131 132 options SCSIVERBOSE # human readable SCSI error messages 133 134 options PCIVERBOSE # verbose PCI device autoconfig messages 135 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 136 137 #Atari specific options 138 139 #options KFONT_8x8 # Use 8x8 font instead of 8x16 140 options ST_POOL_SIZE=22 # smallest that allows TT-HIGH 141 142 options MEMORY_DISK_HOOKS # Boot RAM-disk 143 options DISKLABEL_NBDA # NetBSD disklabels (required) 144 options DISKLABEL_AHDI # NetBSD/AHDI disklabels 145 146 options SERCONSOLE # modem1 console support 147 options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM 148 options STATCLOCK # Separate {stat,prof}clock 149 150 #Try linked commands on all targets 151 options TRY_SCSI_LINKED_COMMANDS=0x7f 152 153 #Build one kernel that can boot from any disk. 154 155 config netbsd root on ? type ? 156 157 pseudo-device sl # Slip 158 pseudo-device ppp # ppp 159 pseudo-device pty # pseudo-terminals 160 pseudo-device loop # Loopback network 161 pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) 162 pseudo-device md 2 # Boot memory disk 163 164 pseudo-device bpfilter 2 # berkeley packet filters 165 pseudo-device tun 2 # network tunnel 166 #pseudo-device gre 2 # generic L3 over IP tunnel 167 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 168 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 169 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 170 pseudo-device vlan # IEEE 802.1q encapsulation 171 pseudo-device ccd 4 # concatenating disk driver 172 #pseudo-device raid 4 # RAIDframe disk driver 173 #options RAID_AUTOCONFIG # auto-configuration of RAID components 174 pseudo-device ipfilter # IP filtering device 175 pseudo-device rnd # /dev/random and in-kernel generator 176 177 #Hardware options for GENERIC are in the various machine type specific files 178 179 #For the moment, the MILAN will be the only one to use wscons, so define 180 #the wscons options here too for the moment. 181 #wscons options 182 183 #builtin terminal emulations 184 #options WSEMUL_SUN # sun terminal emulation 185 options WSEMUL_VT100 # VT100 / VT220 emulation 186 #different kernel output - see dev/wscons/wsdisplayvar.h 187 #XXX: Since the Milan VGA works in monochrome for the moment, _only_ 188 #use black and white here! 189 options WS_KERNEL_FG=WSCOL_WHITE 190 options WS_KERNEL_BG=WSCOL_BLACK 191 192 #compatibility to other console drivers 193 #options WSDISPLAY_COMPAT_USL # VT handling 194 #options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 195 196 #see dev/pckbc/wskbdmap_mfii.c for implemented layouts 197 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 198 #allocate a number of virtual screens at autoconfiguration time 199 options WSDISPLAY_DEFAULTSCREENS=4 200 #use a large software cursor that doesn't blink 201 options PCDISPLAY_SOFTCURSOR 202 #modify the screen type of the console; defaults to "80x25" 203 #options VGA_CONSOLE_SCREENTYPE="\"80x25\"" 204 205 #The following sections describe various hardware options. 206 207 isabus0 at mainbus0 # ISA-bus 208 isa0 at isabus0 209 pcibus0 at mainbus0 # PCI-bus 210 pci0 at pcibus0 211 ser0 at mainbus0 212 fdcisa0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy contr. 213 fdisa0 at fdcisa0 drive 0 214 215 #Ok, the stuff below requires some explanation... 216 #Initially, when Atari started with IDE on the Falcon, they decided to 217 #swap the bytelanes on the IDE controller. So all data on the disk was 218 #byteswapped and all CDROM drivers had to byteswap the data to make 219 #this nice idea work... To remain compatible with the 'current' drivers, 220 #this sceme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan 221 #however, the change was reverted. But... now the hardware is connected to 222 #a little endian (ISA) bus, in PIO mode this is essentially the same as 223 #swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode 224 #provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data 225 #on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER 226 #developers have thought up a solution, you can make a byteswapped disk 227 #during the partioning with HDDRIVER and TOS supports booting from it! 228 #Ok, now you have to choose: 229 #- If _none_ of your disks are marked byteswapped by HDDRIVER, choose 230 #the 1 version. 231 #- If _all_ of your disks are byteswapped, use the MILAN_PCIIDE version 232 #The is no way to mix things! 233 234 #wdc on ISA with flags = WDC_OPTIONS_ATA_NOSTREAM! 235 wdc0 at isa? port 0x1f0 irq 14 flags 0x04 # 1st IDE controller 236 wdc1 at isa? port 0x170 irq 15 flags 0x04 # 2nd IDE controller 237 wd* at wdc? channel ? drive ? 238 atapibus* at wdc? channel ? # ATAPI bus support 239 240 #The Milan uses wscons 241 #XXX without the __HAVE_NWSCONS option, the keyboard won't work... 242 243 options __HAVE_NWSCONS 244 vga0 at pci? dev ? function ? # a PCI VGA card 245 wsdisplay* at vga? console ? # as a wscons console 246 pckbc0 at isa? # PC keyboard controller 247 pckbd* at pckbc? # PC keyboard 248 wskbd* at pckbd? console ? # wscons keyboard 249 250 #ATAPI devices 251 cd* at atapibus? drive ? # ATAPI CD-ROM drives 252
Indexes created Thu Oct 02 14:10:14 GMT 2025