MILAN-PCIIDE revision 1.10
11.1Sleo#
21.9Sleo# $NetBSD: MILAN-PCIIDE,v 1.10 2002/04/12 22:37:22 leo Exp $
31.1Sleo#
41.1Sleo# This file was automatically created. Changes will be
51.1Sleo# lost when running makeconf in this directory.
61.1Sleo#
71.6Slukem# Created from:
81.6Slukem#		NetBSD: MILAN.in,v 1.8 2001/11/20 11:29:41 lukem Exp $
91.10Sleo#		NetBSD: GENERIC.in,v 1.17 2002/04/12 22:34:13 leo Exp $
101.1Sleo
111.1Sleo#This configuration file is for a generic Milan
121.1Sleo
131.1Sleo#Generic atari
141.1Sleo
151.1Sleoinclude "arch/atari/conf/std.milan"
161.1Sleo
171.1Sleo#Add support for about 16 users. This variable is used to size
181.1Sleo#various kernel structures.
191.1Sleo
201.1Sleomaxusers	16
211.1Sleo
221.1Sleooptions 	HZ=64		# Set the clock-rate (48/64/96)
231.1Sleo
241.1Sleo#X11R6 related options
251.1Sleo
261.1Sleooptions 	UCONSOLE	# Allow xconsole to work
271.1Sleo
281.1Sleo#Standard system options
291.1Sleooptions 	INSECURE	# disable kernel security levels
301.1Sleo#options 	NTP		# NTP phase/frequency locked loop
311.1Sleo
321.1Sleo#(Co)processors this kernel should support
331.1Sleo
341.1Sleooptions 	M68040		# support for 040
351.1Sleooptions 	M68060		# support for 060
361.1Sleooptions 	FPSP		# 68040 Floatingpoint support
371.1Sleooptions 	M060SP		# MC68060 software support (Required for 060)
381.1Sleo
391.1Sleo#Networking options
401.1Sleo
411.6Slukemoptions 	INET		# IP + ICMP + TCP + UDP
421.1Sleo
431.1Sleooptions 	INET6		# IPV6
441.1Sleo#options 	IPSEC		# IP security
451.1Sleo#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
461.1Sleo#options 	IPSEC_DEBUG	# debug for IP security
471.6Slukem#options 	GATEWAY		# packet forwarding
481.6Slukem#options 	MROUTING	# IP multicast routing
491.6Slukemoptions 	NS		# XNS
501.6Slukem#options 	NSIP		# XNS tunneling over IP
511.6Slukemoptions 	ISO,TPIP	# OSI
521.6Slukem#options 	EON		# OSI tunneling over IP
531.6Slukemoptions 	CCITT,LLC,HDLC	# X.25
541.6Slukemoptions 	NETATALK	# AppleTalk networking protocols
551.6Slukem
561.6Slukemoptions 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
571.6Slukemoptions 	PPP_DEFLATE	# Deflate compression support for PPP
581.6Slukemoptions 	PPP_FILTER	# Active filter support for PPP (requires bpf)
591.1Sleo
601.6Slukemoptions 	PFIL_HOOKS	# pfil(9) packet filter hooks
611.6Slukemoptions 	IPFILTER_LOG	# ipmon(8) log support
621.1Sleo#options 	IPFILTER_DEFAULT_BLOCK	# block packages by default
631.1Sleo
641.3Sabs#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
651.3Sabs
661.1Sleo#File systems
671.1Sleofile-system 	FFS		# Berkeley fast file system
681.1Sleofile-system 	MFS		# Memory based filesystem
691.1Sleofile-system 	KERNFS		# Kernel parameter filesystem
701.1Sleofile-system 	MSDOSFS		# MSDOS filesystem
711.1Sleofile-system 	CD9660		# ISO 9660 filesystem with Rock Ridge
721.1Sleo
731.1Sleofile-system 	NFS		# Network File System client side code
741.1Sleofile-system 	PROCFS		# Process filesystem
751.1Sleofile-system 	FDESC		# /dev/fd
761.1Sleofile-system 	NULLFS		# Loopback filesystem
771.1Sleofile-system 	OVERLAY		# overlay filesystem
781.1Sleofile-system 	UNION		# union file system
791.1Sleofile-system 	UMAPFS		# null file system (with uid & gid remapping)
801.1Sleofile-system 	PORTAL		# portal file system
811.1Sleofile-system 	EXT2FS		# second extended file system (linux)
821.1Sleofile-system 	LFS		# log-structured file system
831.1Sleo
841.1Sleo#File system options
851.1Sleooptions 	QUOTA		# Disk quotas for local disks
861.1Sleo#options 	FFS_EI		# FFS Endian Independant support
871.6Slukemoptions 	SOFTDEP		# FFS soft updates support.
881.1Sleooptions 	NFSSERVER	# Network File System server side code
891.1Sleo#options 	EXT2FS_SYSTEM_FLAGS	# makes ext2fs file flags (append and
901.9Sleo				# immutable) behave as system flags.
911.1Sleo
921.1Sleo#Misc. debugging options
931.1Sleo
941.1Sleooptions 	PANICWAIT	# Require keystroke to dump/reboot
951.1Sleooptions 	DDB		# Kernel debugger
961.1Sleo
971.1Sleooptions 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
981.1Sleo#options 	DEBUG		# expensive debugging checks/support
991.1Sleo
1001.2Swiz#Compatibility options for various existing systems
1011.1Sleo
1021.1Sleooptions 	COMPAT_43	# 4.3 BSD compatible system calls (required)
1031.1Sleooptions 	COMPAT_10	# Compatibility to NetBSD1.0
1041.1Sleooptions 	COMPAT_11	# Compatibility to NetBSD1.1
1051.1Sleooptions 	COMPAT_12	# Compatibility to NetBSD1.2
1061.1Sleooptions 	COMPAT_13	# Compatibility to NetBSD1.3
1071.1Sleooptions 	COMPAT_14	# Compatibility to NetBSD1.4
1081.1Sleo
1091.1Sleo#options 	COMPAT_09	# has no meaning on the atari
1101.1Sleo#options 	COMPAT_SUNOS	# Support to run Sun-3 executables
1111.1Sleo#options 	COMPAT_SVR4	# Support to run SVR4 executables
1121.1Sleo#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
1131.3Sabs#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
1141.1Sleo
1151.6Slukemoptions 	COMPAT_AOUT_M68K # Compatibility to a.out executables
1161.6Slukemoptions 	EXEC_AOUT	# a.out format executables
1171.6Slukem
1181.1Sleo#Support for System V IPC facilities.
1191.1Sleo
1201.1Sleooptions 	SYSVSHM			# System V shared memory
1211.1Sleooptions 	SYSVMSG			# System V messages
1221.1Sleooptions 	SYSVSEM			# System V semaphores
1231.4Sleo#options 	SEMMNI=10		# number of semaphore identifiers
1241.4Sleo#options 	SEMUME=10		# max number of undo entries per proc.
1251.4Sleo#options 	SEMMNU=30		# number of undo structures in system
1261.1Sleo
1271.1Sleo#Support for various kernel options
1281.1Sleo
1291.1Sleooptions 	KTRACE			# Add kernel tracing system call
1301.1Sleooptions 	DIAGNOSTIC		# Add additional error checking code
1311.10Sleo#options 	USERCONF		# userconf(4) support
1321.9Sleo#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
1331.1Sleo
1341.1Sleo#These options enable verbose messages for several subsystems.
1351.1Sleo#Warning, these may compile large string tables into the kernel!
1361.1Sleo
1371.1Sleooptions 	SCSIVERBOSE		# human readable SCSI error messages
1381.1Sleo
1391.9Sleooptions 	MIIVERBOSE		# verbose PHY autoconfig messages
1401.1Sleooptions 	PCIVERBOSE		# verbose PCI device autoconfig messages
1411.1Sleo#options 	PCI_CONFIG_DUMP		# verbosely dump PCI config space
1421.1Sleo
1431.1Sleo#Atari specific options
1441.1Sleo
1451.1Sleo#options 	KFONT_8x8		# Use 8x8 font instead of 8x16
1461.1Sleooptions 	ST_POOL_SIZE=22		# smallest that allows TT-HIGH
1471.1Sleo
1481.1Sleooptions 	MEMORY_DISK_HOOKS	# Boot RAM-disk
1491.1Sleooptions 	DISKLABEL_NBDA		# NetBSD disklabels (required)
1501.1Sleooptions 	DISKLABEL_AHDI		# NetBSD/AHDI disklabels
1511.1Sleo
1521.1Sleooptions 	SERCONSOLE		# modem1 console support
1531.1Sleooptions 	RELOC_KERNEL		# TT/Falcon: relocate kernel to TT-RAM
1541.9Sleo#options 	MSGBUFSIZE=32768        # size of kernel msg. buffer
1551.9Sleo#options 	STATCLOCK	        # Separate {stat,prof}clock
1561.1Sleo
1571.1Sleo#Try linked commands on all targets
1581.1Sleooptions 	TRY_SCSI_LINKED_COMMANDS=0x7f
1591.1Sleo
1601.1Sleo#Build one kernel that can boot from any disk.
1611.1Sleo
1621.1Sleoconfig		netbsd root on ? type ?
1631.1Sleo
1641.1Sleopseudo-device	sl			# Slip
1651.1Sleopseudo-device	ppp			# ppp
1661.7Sjdolecekpseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
1671.1Sleopseudo-device	pty			# pseudo-terminals
1681.1Sleopseudo-device	loop			# Loopback network
1691.1Sleopseudo-device	vnd		3	# 3 pseudo disks (see vnconfig)
1701.1Sleopseudo-device	md		2	# Boot memory disk
1711.1Sleo
1721.1Sleopseudo-device	bpfilter	2	# berkeley packet filters
1731.1Sleopseudo-device	tun		2	# network tunnel
1741.1Sleo#pseudo-device	gre		2	# generic L3 over IP tunnel
1751.1Sleopseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
1761.1Sleo#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
1771.1Sleo#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
1781.1Sleopseudo-device	vlan			# IEEE 802.1q encapsulation
1791.7Sjdolecekpseudo-device	bridge			# simple inter-network bridging
1801.1Sleopseudo-device	ccd		4	# concatenating disk driver
1811.7Sjdolecekpseudo-device	raid		8	# RAIDframe disk driver
1821.7Sjdolecekoptions 	RAID_AUTOCONFIG		# auto-configuration of RAID components
1831.7Sjdolecek#Options to enable various other RAIDframe RAID types.
1841.7Sjdolecek#options	RF_INCLUDE_EVENODD=1
1851.7Sjdolecek#options	RF_INCLUDE_RAID5_RS=1
1861.7Sjdolecek#options	RF_INCLUDE_PARITYLOGGING=1
1871.7Sjdolecek#options	RF_INCLUDE_CHAINDECLUSTER=1
1881.7Sjdolecek#options	RF_INCLUDE_INTERDECLUSTER=1
1891.7Sjdolecek#options 	RF_INCLUDE_PARITY_DECLUSTERING=1
1901.7Sjdolecek#options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
1911.1Sleopseudo-device	ipfilter		# IP filtering device
1921.1Sleopseudo-device	rnd			# /dev/random and in-kernel generator
1931.1Sleo
1941.9Sleo#MII/PHY support
1951.9Sleoexphy*	at mii? phy ?			# 3Com internal PHYs
1961.9Sleoinphy*	at mii? phy ?			# Intel 82555 PHYs
1971.9Sleoiophy*	at mii? phy ?			# Intel 82553 PHYs
1981.9Sleoukphy*	at mii? phy ?			# generic unknown PHYs
1991.9Sleo
2001.9Sleo#PCI network interfaces
2011.9Sleo#If unsure, check the port-atari page for tested cards.
2021.9Sleoep*	at pci? dev ? function ?	# 3Com 3c59x
2031.9Sleoex*	at pci? dev ? function ?	# 3Com 90x[BC]
2041.9Sleofxp*	at pci? dev ? function ?	# Intel EtherExpress PRO 10+/100B
2051.9Sleo
2061.9Sleo#This is the only tested audio card at the moment.
2071.9Sleo
2081.9Sleoeso*	at pci? dev ? function ?	# ESS Solo-1 PCI AudioDrive
2091.9Sleoaudio*	at eso?
2101.9Sleo
2111.1Sleo#Hardware options for GENERIC are in the various machine type specific files
2121.1Sleo
2131.1Sleo#For the moment, the MILAN will be the only one to use wscons, so define
2141.1Sleo#the wscons options here too for the moment.
2151.1Sleo#wscons options
2161.1Sleo
2171.1Sleo#builtin terminal emulations
2181.1Sleo#options 	WSEMUL_SUN	# sun terminal emulation
2191.1Sleooptions 	WSEMUL_VT100	# VT100 / VT220 emulation
2201.1Sleo#different kernel output - see dev/wscons/wsdisplayvar.h
2211.6Slukem#XXX:	Since the Milan VGA works in monochrome for the moment, _only_
2221.1Sleo#use black and white here!
2231.1Sleooptions 	WS_KERNEL_FG=WSCOL_WHITE
2241.1Sleooptions 	WS_KERNEL_BG=WSCOL_BLACK
2251.1Sleo
2261.1Sleo#compatibility to other console drivers
2271.1Sleo#options 	WSDISPLAY_COMPAT_USL	# VT handling
2281.1Sleo#options 	WSDISPLAY_COMPAT_RAWKBD	# can get raw scancodes
2291.1Sleo
2301.1Sleo#see dev/pckbc/wskbdmap_mfii.c for implemented layouts
2311.1Sleo#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
2321.1Sleo#allocate a number of virtual screens at autoconfiguration time
2331.1Sleooptions 	WSDISPLAY_DEFAULTSCREENS=4
2341.1Sleo#use a large software cursor that doesn't blink
2351.1Sleooptions 	PCDISPLAY_SOFTCURSOR
2361.1Sleo#modify the screen type of the console; defaults to "80x25"
2371.1Sleo#options 	VGA_CONSOLE_SCREENTYPE="\"80x25\""
2381.1Sleo
2391.1Sleo#The following sections describe various hardware options.
2401.1Sleo
2411.1Sleoisabus0 	at mainbus0			# ISA-bus
2421.1Sleoisa0 		at isabus0
2431.1Sleopcibus0 	at mainbus0			# PCI-bus
2441.1Sleopci0 		at pcibus0
2451.1Sleoser0 		at mainbus0
2461.6Slukemfdcisa0 	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy contr.
2471.1Sleofdisa0 		at fdcisa0 drive 0
2481.1Sleo
2491.1Sleo#Ok, the stuff below requires some explanation...
2501.1Sleo#Initially, when Atari started with IDE on the Falcon, they decided to
2511.1Sleo#swap the bytelanes on the IDE controller. So all data on the disk was
2521.1Sleo#byteswapped and all CDROM drivers had to byteswap the data to make
2531.1Sleo#this nice idea work... To remain compatible with the 'current' drivers,
2541.5Swiz#this scheme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan
2551.1Sleo#however, the change was reverted. But... now the hardware is connected to
2561.1Sleo#a little endian (ISA) bus, in PIO mode this is essentially the same as
2571.1Sleo#swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode
2581.1Sleo#provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data
2591.9Sleo#on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER
2601.1Sleo#developers have thought up a solution, you can make a byteswapped disk
2611.1Sleo#during the partioning with HDDRIVER and TOS supports booting from it!
2621.1Sleo#Ok, now you have to choose:
2631.1Sleo#- If _none_ of your disks are marked byteswapped by HDDRIVER, choose
2641.1Sleo#the MILAN_ISAIDE version.
2651.9Sleo#- If _all_ of your disks are byteswapped, use the  1 version
2661.1Sleo#The is no way to mix things!
2671.1Sleo
2681.1Sleopciide* 	at pci? dev ? function ? flags 0x0000	# 2 PCIIDE channels
2691.1Sleowd* 		at pciide? channel ? drive ? flags 0x0000
2701.1Sleoatapibus* 	at pciide? channel ?			# ATAPI bus support
2711.1Sleo
2721.1Sleo#The Milan uses wscons
2731.1Sleo#XXX without the __HAVE_NWSCONS option, the keyboard won't work...
2741.9Sleo
2751.1Sleooptions 	__HAVE_NWSCONS
2761.1Sleovga0 		at pci? dev ? function ?	# a PCI VGA card
2771.1Sleowsdisplay* 	at vga? console ?		# as a wscons console
2781.1Sleopckbc0 		at isa? 			# PC keyboard controller
2791.1Sleopckbd* 		at pckbc?			# PC keyboard
2801.1Sleowskbd* 		at pckbd? console ?		# wscons keyboard
2811.1Sleo
2821.1Sleo#ATAPI devices
2831.1Sleocd* 		at atapibus? drive ?		# ATAPI CD-ROM drives
284