MILAN-PCIIDE revision 1.14
1 # 2 # $NetBSD: MILAN-PCIIDE,v 1.14 2002/06/15 21:45:37 leo Exp $ 3 # 4 # This file was automatically created. Changes will be 5 # lost when running makeconf in this directory. 6 # 7 # Created from: 8 # NetBSD: MILAN.in,v 1.10 2002/06/15 21:44:07 leo Exp $ 9 # NetBSD: GENERIC.in,v 1.20 2002/05/23 06:30:32 leo Exp $ 10 11 #This configuration file is for a generic Milan 12 13 #Generic atari 14 15 include "arch/atari/conf/std.milan" 16 17 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 18 19 #Add support for about 16 users. This variable is used to size 20 #various kernel structures. 21 22 maxusers 16 23 24 options HZ=64 # Set the clock-rate (48/64/96) 25 26 #X11R6 related options 27 28 options UCONSOLE # Allow xconsole to work 29 30 #Standard system options 31 options INSECURE # disable kernel security levels 32 #options NTP # NTP phase/frequency locked loop 33 34 #(Co)processors this kernel should support 35 36 options M68040 # support for 040 37 options M68060 # support for 060 38 options FPSP # 68040 Floatingpoint support 39 options M060SP # MC68060 software support (Required for 060) 40 41 #Networking options 42 43 options INET # IP + ICMP + TCP + UDP 44 45 options INET6 # IPV6 46 #options IPSEC # IP security 47 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 48 #options IPSEC_DEBUG # debug for IP security 49 #options GATEWAY # packet forwarding 50 #options MROUTING # IP multicast routing 51 options NS # XNS 52 #options NSIP # XNS tunneling over IP 53 options ISO,TPIP # OSI 54 #options EON # OSI tunneling over IP 55 options CCITT,LLC,HDLC # X.25 56 options NETATALK # AppleTalk networking protocols 57 58 options PPP_BSDCOMP # BSD-Compress compression support for PPP 59 options PPP_DEFLATE # Deflate compression support for PPP 60 options PPP_FILTER # Active filter support for PPP (requires bpf) 61 62 options PFIL_HOOKS # pfil(9) packet filter hooks 63 options IPFILTER_LOG # ipmon(8) log support 64 #options IPFILTER_DEFAULT_BLOCK # block packages by default 65 66 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 67 68 #File systems 69 file-system FFS # Berkeley fast file system 70 file-system MFS # Memory based filesystem 71 file-system KERNFS # Kernel parameter filesystem 72 file-system MSDOSFS # MSDOS filesystem 73 file-system CD9660 # ISO 9660 filesystem with Rock Ridge 74 75 file-system NFS # Network File System client side code 76 file-system PROCFS # Process filesystem 77 file-system FDESC # /dev/fd 78 file-system NULLFS # Loopback filesystem 79 file-system OVERLAY # overlay filesystem 80 file-system UNION # union file system 81 file-system UMAPFS # null file system (with uid & gid remapping) 82 file-system PORTAL # portal file system 83 file-system EXT2FS # second extended file system (linux) 84 file-system LFS # log-structured file system 85 86 #File system options 87 options QUOTA # Disk quotas for local disks 88 #options FFS_EI # FFS Endian Independant support 89 options SOFTDEP # FFS soft updates support. 90 options NFSSERVER # Network File System server side code 91 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 92 # immutable) behave as system flags. 93 94 #Misc. debugging options 95 96 options PANICWAIT # Require keystroke to dump/reboot 97 options DDB # Kernel debugger 98 99 options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 100 #options DEBUG # expensive debugging checks/support 101 102 #Compatibility options for various existing systems 103 104 options COMPAT_43 # 4.3 BSD compatible system calls (required) 105 options COMPAT_10 # Compatibility to NetBSD1.0 106 options COMPAT_11 # Compatibility to NetBSD1.1 107 options COMPAT_12 # Compatibility to NetBSD1.2 108 options COMPAT_13 # Compatibility to NetBSD1.3 109 options COMPAT_14 # Compatibility to NetBSD1.4 110 111 #options COMPAT_09 # has no meaning on the atari 112 #options COMPAT_SUNOS # Support to run Sun-3 executables 113 #options COMPAT_SVR4 # Support to run SVR4 executables 114 #options COMPAT_LINUX # Support to run Linux/m68k executables 115 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 116 117 options COMPAT_AOUT_M68K # Compatibility to a.out executables 118 options EXEC_AOUT # a.out format executables 119 120 #Support for System V IPC facilities. 121 122 options SYSVSHM # System V shared memory 123 options SYSVMSG # System V messages 124 options SYSVSEM # System V semaphores 125 #options SEMMNI=10 # number of semaphore identifiers 126 #options SEMUME=10 # max number of undo entries per proc. 127 #options SEMMNU=30 # number of undo structures in system 128 129 #Support for various kernel options 130 131 options KTRACE # Add kernel tracing system call 132 options DIAGNOSTIC # Add additional error checking code 133 #options USERCONF # userconf(4) support 134 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 135 136 #These options enable verbose messages for several subsystems. 137 #Warning, these may compile large string tables into the kernel! 138 139 options SCSIVERBOSE # human readable SCSI error messages 140 141 options MIIVERBOSE # verbose PHY autoconfig messages 142 options PCIVERBOSE # verbose PCI device autoconfig messages 143 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 144 145 #Atari specific options 146 147 #options KFONT_8x8 # Use 8x8 font instead of 8x16 148 options ST_POOL_SIZE=22 # smallest that allows TT-HIGH 149 150 options MEMORY_DISK_HOOKS # Boot RAM-disk 151 options DISKLABEL_NBDA # NetBSD disklabels (required) 152 options DISKLABEL_AHDI # NetBSD/AHDI disklabels 153 154 options SERCONSOLE # modem1 console support 155 options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM 156 #options MSGBUFSIZE=32768 # size of kernel msg. buffer 157 #options STATCLOCK # Separate {stat,prof}clock 158 159 #Try linked commands on all targets 160 options TRY_SCSI_LINKED_COMMANDS=0x7f 161 162 #Build one kernel that can boot from any disk. 163 164 config netbsd root on ? type ? 165 166 pseudo-device sl # Slip 167 pseudo-device ppp # ppp 168 169 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 170 171 pseudo-device pty # pseudo-terminals 172 pseudo-device loop # Loopback network 173 pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) 174 pseudo-device md 2 # Boot memory disk 175 176 pseudo-device bpfilter 2 # berkeley packet filters 177 pseudo-device tun 2 # network tunnel 178 #pseudo-device gre 2 # generic L3 over IP tunnel 179 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 180 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 181 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 182 pseudo-device vlan # IEEE 802.1q encapsulation 183 pseudo-device bridge # simple inter-network bridging 184 pseudo-device ccd 4 # concatenating disk driver 185 pseudo-device raid 8 # RAIDframe disk driver 186 options RAID_AUTOCONFIG # auto-configuration of RAID components 187 #Options to enable various other RAIDframe RAID types. 188 #options RF_INCLUDE_EVENODD=1 189 #options RF_INCLUDE_RAID5_RS=1 190 #options RF_INCLUDE_PARITYLOGGING=1 191 #options RF_INCLUDE_CHAINDECLUSTER=1 192 #options RF_INCLUDE_INTERDECLUSTER=1 193 #options RF_INCLUDE_PARITY_DECLUSTERING=1 194 #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 195 pseudo-device ipfilter # IP filtering device 196 pseudo-device rnd # /dev/random and in-kernel generator 197 198 #MII/PHY support 199 exphy* at mii? phy ? # 3Com internal PHYs 200 inphy* at mii? phy ? # Intel 82555 PHYs 201 iophy* at mii? phy ? # Intel 82553 PHYs 202 ukphy* at mii? phy ? # generic unknown PHYs 203 204 #PCI network interfaces 205 #If unsure, check the port-atari page for tested cards. 206 ep* at pci? dev ? function ? # 3Com 3c59x 207 fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B 208 209 #This is the only tested audio card at the moment. 210 211 eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive 212 audio* at eso? 213 214 #Hardware options for GENERIC are in the various machine type specific files 215 216 #For the moment, the MILAN will be the only one to use wscons, so define 217 #the wscons options here too for the moment. 218 #wscons options 219 220 #builtin terminal emulations 221 #options WSEMUL_SUN # sun terminal emulation 222 options WSEMUL_VT100 # VT100 / VT220 emulation 223 #different kernel output - see dev/wscons/wsdisplayvar.h 224 #XXX: Since the Milan VGA works in monochrome for the moment, _only_ 225 #use black and white here! 226 options WS_KERNEL_FG=WSCOL_WHITE 227 options WS_KERNEL_BG=WSCOL_BLACK 228 229 #compatibility to other console drivers 230 #options WSDISPLAY_COMPAT_USL # VT handling 231 #options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 232 233 #see dev/pckbc/wskbdmap_mfii.c for implemented layouts 234 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 235 #allocate a number of virtual screens at autoconfiguration time 236 options WSDISPLAY_DEFAULTSCREENS=4 237 #use a large software cursor that doesn't blink 238 options PCDISPLAY_SOFTCURSOR 239 #modify the screen type of the console; defaults to "80x25" 240 #options VGA_CONSOLE_SCREENTYPE="\"80x25\"" 241 242 #The following sections describe various hardware options. 243 244 isabus0 at mainbus0 # ISA-bus 245 isa0 at isabus0 246 pcibus0 at mainbus0 # PCI-bus 247 pci0 at pcibus0 248 nvr0 at mainbus0 # nvram driver 249 ser0 at mainbus0 250 fdcisa0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy contr. 251 fdisa0 at fdcisa0 drive 0 252 253 #Ok, the stuff below requires some explanation... 254 #Initially, when Atari started with IDE on the Falcon, they decided to 255 #swap the bytelanes on the IDE controller. So all data on the disk was 256 #byteswapped and all CDROM drivers had to byteswap the data to make 257 #this nice idea work... To remain compatible with the 'current' drivers, 258 #this scheme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan 259 #however, the change was reverted. But... now the hardware is connected to 260 #a little endian (ISA) bus, in PIO mode this is essentially the same as 261 #swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode 262 #provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data 263 #on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER 264 #developers have thought up a solution, you can make a byteswapped disk 265 #during the partioning with HDDRIVER and TOS supports booting from it! 266 #Ok, now you have to choose: 267 #- If _none_ of your disks are marked byteswapped by HDDRIVER, choose 268 #the MILAN-ISAIDE version. 269 #- If _all_ of your disks are byteswapped, use the MILAN-PCIIDE version 270 #The is no way to mix things! 271 272 pciide* at pci? dev ? function ? flags 0x0000 # 2 PCIIDE channels 273 wd* at pciide? channel ? drive ? flags 0x0000 274 atapibus* at pciide? channel ? # ATAPI bus support 275 276 #The Milan uses wscons 277 #XXX without the __HAVE_NWSCONS option, the keyboard won't work... 278 279 options __HAVE_NWSCONS 280 vga0 at pci? dev ? function ? # a PCI VGA card 281 wsdisplay* at vga? console ? # as a wscons console 282 pckbc0 at isa? # PC keyboard controller 283 pckbd* at pckbc? # PC keyboard 284 wskbd* at pckbd? console ? # wscons keyboard 285 286 #ATAPI devices 287 cd* at atapibus? drive ? # ATAPI CD-ROM drives 288
Indexes created Fri Oct 03 23:09:56 GMT 2025