MILAN-PCIIDE revision 1.18
1 # 2 # $NetBSD: MILAN-PCIIDE,v 1.18 2002/10/14 18:39:28 elric Exp $ 3 # 4 # This file was automatically created. Changes will be 5 # lost when running makeconf in this directory. 6 # 7 # Created from: 8 # NetBSD: MILAN.in,v 1.10 2002/06/15 21:44:07 leo Exp $ 9 # NetBSD: GENERIC.in,v 1.27 2002/10/14 18:24:33 elric Exp $ 10 11 #This configuration file is for a generic Milan 12 13 #Generic atari 14 15 include "arch/atari/conf/std.milan" 16 17 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 18 19 #Add support for about 16 users. This variable is used to size 20 #various kernel structures. 21 22 maxusers 16 23 24 options HZ=64 # Set the clock-rate (48/64/96) 25 26 #X11R6 related options 27 28 options UCONSOLE # Allow xconsole to work 29 30 #Standard system options 31 options INSECURE # disable kernel security levels 32 #options NTP # NTP phase/frequency locked loop 33 34 #(Co)processors this kernel should support 35 36 options M68040 # support for 040 37 options M68060 # support for 060 38 options FPSP # 68040 Floatingpoint support 39 options M060SP # MC68060 software support (Required for 060) 40 41 #Networking options 42 43 options INET # IP + ICMP + TCP + UDP 44 45 options INET6 # IPV6 46 #options IPSEC # IP security 47 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 48 #options IPSEC_DEBUG # debug for IP security 49 #options GATEWAY # packet forwarding 50 #options MROUTING # IP multicast routing 51 options NS # XNS 52 #options NSIP # XNS tunneling over IP 53 options ISO,TPIP # OSI 54 #options EON # OSI tunneling over IP 55 options CCITT,LLC,HDLC # X.25 56 57 options NETATALK # AppleTalk networking protocols 58 59 options PPP_BSDCOMP # BSD-Compress compression support for PPP 60 options PPP_DEFLATE # Deflate compression support for PPP 61 options PPP_FILTER # Active filter support for PPP (requires bpf) 62 63 options PFIL_HOOKS # pfil(9) packet filter hooks 64 options IPFILTER_LOG # ipmon(8) log support 65 #options IPFILTER_DEFAULT_BLOCK # block packages by default 66 67 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 68 69 #File systems 70 file-system FFS # Berkeley fast file system 71 file-system MFS # Memory based filesystem 72 file-system KERNFS # Kernel parameter filesystem 73 file-system MSDOSFS # MSDOS filesystem 74 file-system CD9660 # ISO 9660 filesystem with Rock Ridge 75 76 file-system NFS # Network File System client side code 77 file-system PROCFS # Process filesystem 78 file-system FDESC # /dev/fd 79 file-system NULLFS # Loopback filesystem 80 file-system OVERLAY # overlay filesystem 81 file-system UNION # union file system 82 file-system UMAPFS # null file system (with uid & gid remapping) 83 file-system PORTAL # portal file system 84 file-system EXT2FS # second extended file system (linux) 85 file-system LFS # log-structured file system 86 87 #File system options 88 options QUOTA # Disk quotas for local disks 89 #options FFS_EI # FFS Endian Independant support 90 options SOFTDEP # FFS soft updates support. 91 options NFSSERVER # Network File System server side code 92 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 93 #immutable) behave as system flags. 94 95 #Misc. debugging options 96 97 options PANICWAIT # Require keystroke to dump/reboot 98 options DDB # Kernel debugger 99 100 options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 101 #options DEBUG # expensive debugging checks/support 102 103 #Compatibility options for various existing systems 104 105 options COMPAT_43 # 4.3 BSD compatible system calls (required) 106 options COMPAT_10 # Compatibility to NetBSD1.0 107 options COMPAT_11 # Compatibility to NetBSD1.1 108 options COMPAT_12 # Compatibility to NetBSD1.2 109 options COMPAT_13 # Compatibility to NetBSD1.3 110 options COMPAT_14 # Compatibility to NetBSD1.4 111 112 #options COMPAT_09 # has no meaning on the atari 113 #options COMPAT_SUNOS # Support to run Sun-3 executables 114 #options COMPAT_SVR4 # Support to run SVR4 executables 115 #options COMPAT_LINUX # Support to run Linux/m68k executables 116 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 117 118 options COMPAT_AOUT_M68K # Compatibility to a.out executables 119 options EXEC_AOUT # a.out format executables 120 121 #Support for System V IPC facilities. 122 123 options SYSVSHM # System V shared memory 124 options SYSVMSG # System V messages 125 options SYSVSEM # System V semaphores 126 #options SEMMNI=10 # number of semaphore identifiers 127 #options SEMUME=10 # max number of undo entries per proc. 128 #options SEMMNU=30 # number of undo structures in system 129 130 #Support for various kernel options 131 132 options KTRACE # Add kernel tracing system call 133 options SYSTRACE # system call vetting via systrace(1) 134 options DIAGNOSTIC # Add additional error checking code 135 options USERCONF # userconf(4) support 136 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 137 138 #These options enable verbose messages for several subsystems. 139 #Warning, these may compile large string tables into the kernel! 140 141 options SCSIVERBOSE # human readable SCSI error messages 142 143 options MIIVERBOSE # verbose PHY autoconfig messages 144 options PCIVERBOSE # verbose PCI device autoconfig messages 145 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 146 147 #Atari specific options 148 149 #options KFONT_8x8 # Use 8x8 font instead of 8x16 150 options ST_POOL_SIZE=22 # smallest that allows TT-HIGH 151 152 options MEMORY_DISK_HOOKS # Boot RAM-disk 153 options DISKLABEL_NBDA # NetBSD disklabels (required) 154 options DISKLABEL_AHDI # NetBSD/AHDI disklabels 155 156 options SERCONSOLE # modem1 console support 157 options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM 158 options MSGBUFSIZE=32768 # size of kernel msg. buffer 159 #options STATCLOCK # Separate {stat,prof}clock 160 161 #Try linked commands on all targets 162 options TRY_SCSI_LINKED_COMMANDS=0x7f 163 164 #Build one kernel that can boot from any disk. 165 166 config netbsd root on ? type ? 167 168 pseudo-device sl # Slip 169 pseudo-device ppp # ppp 170 171 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 172 173 pseudo-device pty # pseudo-terminals 174 pseudo-device loop # Loopback network 175 pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) 176 pseudo-device md 2 # Boot memory disk 177 178 pseudo-device bpfilter 2 # berkeley packet filters 179 pseudo-device tun 2 # network tunnel 180 #pseudo-device gre 2 # generic L3 over IP tunnel 181 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 182 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 183 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 184 185 pseudo-device vlan # IEEE 802.1q encapsulation 186 pseudo-device bridge # simple inter-network bridging 187 188 pseudo-device ccd 4 # concatenating disk driver 189 #pseudo-device cgd 4 # cryptographic disk driver 190 pseudo-device raid 8 # RAIDframe disk driver 191 options RAID_AUTOCONFIG # auto-configuration of RAID components 192 #Options to enable various other RAIDframe RAID types. 193 #options RF_INCLUDE_EVENODD=1 194 #options RF_INCLUDE_RAID5_RS=1 195 #options RF_INCLUDE_PARITYLOGGING=1 196 #options RF_INCLUDE_CHAINDECLUSTER=1 197 #options RF_INCLUDE_INTERDECLUSTER=1 198 #options RF_INCLUDE_PARITY_DECLUSTERING=1 199 #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 200 pseudo-device ipfilter # IP filtering device 201 pseudo-device rnd # /dev/random and in-kernel generator 202 pseudo-device clockctl # user control of clock subsystem 203 204 #MII/PHY support 205 exphy* at mii? phy ? # 3Com internal PHYs 206 inphy* at mii? phy ? # Intel 82555 PHYs 207 iophy* at mii? phy ? # Intel 82553 PHYs 208 ukphy* at mii? phy ? # generic unknown PHYs 209 210 #PCI network interfaces 211 #If unsure, check the port-atari page for tested cards. 212 ep* at pci? dev ? function ? # 3Com 3c59x 213 fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B 214 215 #This is the only tested audio card at the moment. 216 217 eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive 218 audio* at eso? 219 220 #Hardware options for GENERIC are in the various machine type specific files 221 222 #For the moment, the MILAN will be the only one to use wscons, so define 223 #the wscons options here too for the moment. 224 #wscons options 225 226 #builtin terminal emulations 227 #options WSEMUL_SUN # sun terminal emulation 228 options WSEMUL_VT100 # VT100 / VT220 emulation 229 #different kernel output - see dev/wscons/wsdisplayvar.h 230 #XXX: Since the Milan VGA works in monochrome for the moment, _only_ 231 #use black and white here! 232 options WS_KERNEL_FG=WSCOL_WHITE 233 options WS_KERNEL_BG=WSCOL_BLACK 234 235 #compatibility to other console drivers 236 #options WSDISPLAY_COMPAT_USL # VT handling 237 #options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 238 239 #see dev/pckbc/wskbdmap_mfii.c for implemented layouts 240 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 241 #allocate a number of virtual screens at autoconfiguration time 242 options WSDISPLAY_DEFAULTSCREENS=4 243 #use a large software cursor that doesn't blink 244 options PCDISPLAY_SOFTCURSOR 245 #modify the screen type of the console; defaults to "80x25" 246 #options VGA_CONSOLE_SCREENTYPE="\"80x25\"" 247 248 #The following sections describe various hardware options. 249 250 isabus0 at mainbus0 # ISA-bus 251 isa0 at isabus0 252 pcibus0 at mainbus0 # PCI-bus 253 pci0 at pcibus0 254 nvr0 at mainbus0 # nvram driver 255 ser0 at mainbus0 256 fdcisa0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy contr. 257 fdisa0 at fdcisa0 drive 0 258 259 #Ok, the stuff below requires some explanation... 260 #Initially, when Atari started with IDE on the Falcon, they decided to 261 #swap the bytelanes on the IDE controller. So all data on the disk was 262 #byteswapped and all CDROM drivers had to byteswap the data to make 263 #this nice idea work... To remain compatible with the 'current' drivers, 264 #this scheme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan 265 #however, the change was reverted. But... now the hardware is connected to 266 #a little endian (ISA) bus, in PIO mode this is essentially the same as 267 #swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode 268 #provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data 269 # on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER 270 #developers have thought up a solution, you can make a byteswapped disk 271 #during the partioning with HDDRIVER and TOS supports booting from it! 272 #Ok, now you have to choose: 273 #- If _none_ of your disks are marked byteswapped by HDDRIVER, choose 274 #the MILAN-ISAIDE version. 275 #- If _all_ of your disks are byteswapped, use the MILAN-PCIIDE version 276 #The is no way to mix things! 277 278 pciide* at pci? dev ? function ? flags 0x0000 # 2 PCIIDE channels 279 wd* at pciide? channel ? drive ? flags 0x0000 280 atapibus* at pciide? channel ? # ATAPI bus support 281 282 #The Milan uses wscons 283 #XXX without the __HAVE_NWSCONS option, the keyboard won't work... 284 # 285 options __HAVE_NWSCONS 286 vga0 at pci? dev ? function ? # a PCI VGA card 287 wsdisplay* at vga? console ? # as a wscons console 288 pckbc0 at isa? # PC keyboard controller 289 pckbd* at pckbc? # PC keyboard 290 wskbd* at pckbd? console ? # wscons keyboard 291 292 #ATAPI devices 293 cd* at atapibus? drive ? # ATAPI CD-ROM drives 294
Indexes created Sat Oct 11 19:10:01 GMT 2025