Home | History | Annotate | Line # | Download | only in conf
MILAN.in revision 1.25.8.1
      1       1.1       leo #
      2  1.25.8.1      yamt #	$NetBSD: MILAN.in,v 1.25.8.1 2012/10/30 17:19:12 yamt Exp $
      3       1.1       leo #
      4       1.1       leo # Milan
      5       1.1       leo #
      6       1.1       leo # This configuration file is for a generic Milan
      7       1.1       leo #
      8       1.1       leo 
      9       1.1       leo #include "GENERIC.in"
     10       1.1       leo 
     11       1.1       leo #
     12       1.2       leo # For the moment, the MILAN will be the only one to use wscons, so define
     13       1.2       leo # the wscons options here too for the moment.
     14       1.2       leo # wscons options
     15       1.2       leo #
     16       1.2       leo # builtin terminal emulations
     17       1.2       leo #options 	WSEMUL_SUN	# sun terminal emulation
     18       1.2       leo options 	WSEMUL_VT100	# VT100 / VT220 emulation
     19       1.2       leo # different kernel output - see dev/wscons/wsdisplayvar.h
     20       1.8     lukem # XXX:	Since the Milan VGA works in monochrome for the moment, _only_
     21       1.8     lukem #	use black and white here!
     22       1.2       leo options 	WS_KERNEL_FG=WSCOL_WHITE
     23       1.2       leo options 	WS_KERNEL_BG=WSCOL_BLACK
     24       1.2       leo 
     25       1.2       leo # compatibility to other console drivers
     26  1.25.8.1      yamt #options 	WSDISPLAY_COMPAT_USL	# wsconscfg VT handling
     27       1.2       leo #options 	WSDISPLAY_COMPAT_RAWKBD	# can get raw scancodes
     28       1.2       leo 
     29      1.20  drochner # see dev/pckbport/wskbdmap_mfii.c for implemented layouts
     30       1.2       leo #options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
     31       1.2       leo # allocate a number of virtual screens at autoconfiguration time
     32       1.2       leo options 	WSDISPLAY_DEFAULTSCREENS=4
     33       1.2       leo # use a large software cursor that doesn't blink
     34       1.2       leo options 	PCDISPLAY_SOFTCURSOR
     35       1.2       leo # modify the screen type of the console; defaults to "80x25"
     36       1.2       leo #options 	VGA_CONSOLE_SCREENTYPE="\"80x25\""
     37       1.2       leo 
     38       1.2       leo #
     39       1.1       leo # The following sections describe various hardware options.
     40       1.1       leo #
     41       1.1       leo 
     42      1.11       leo isab0 		at mainbus0			# ISA-bus
     43      1.11       leo isa0 		at isab0
     44      1.11       leo pcib0 		at mainbus0			# PCI-bus
     45      1.11       leo pci0 		at pcib0
     46       1.9       leo nvr0 		at mainbus0			# nvram driver
     47       1.5       leo ser0 		at mainbus0
     48       1.8     lukem fdcisa0 	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy contr.
     49       1.5       leo fdisa0 		at fdcisa0 drive 0
     50       1.5       leo 
     51       1.6       leo #
     52       1.6       leo # Ok, the stuff below requires some explanation...
     53       1.6       leo # Initially, when Atari started with IDE on the Falcon, they decided to
     54       1.6       leo # swap the bytelanes on the IDE controller. So all data on the disk was
     55       1.6       leo # byteswapped and all CDROM drivers had to byteswap the data to make
     56       1.6       leo # this nice idea work... To remain compatible with the 'current' drivers,
     57       1.7       wiz # this scheme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan
     58       1.6       leo # however, the change was reverted. But... now the hardware is connected to
     59       1.6       leo # a little endian (ISA) bus, in PIO mode this is essentially the same as
     60       1.6       leo # swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode
     61       1.6       leo # provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data
     62       1.6       leo # on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER
     63       1.6       leo # developers have thought up a solution, you can make a byteswapped disk
     64      1.23   mbalmer # during the partitioning with HDDRIVER and TOS supports booting from it!
     65       1.6       leo # Ok, now you have to choose:
     66       1.6       leo #   - If _none_ of your disks are marked byteswapped by HDDRIVER, choose
     67      1.10       leo #     the MILAN-ISAIDE version.
     68      1.10       leo #   - If _all_ of your disks are byteswapped, use the  MILAN-PCIIDE version
     69       1.6       leo # The is no way to mix things!
     70       1.6       leo #
     71       1.6       leo 
     72       1.6       leo #if defined(MILAN_ISAIDE)
     73       1.6       leo # wdc on ISA with flags = WDC_OPTIONS_ATA_NOSTREAM!
     74       1.6       leo wdc0 		at isa? port 0x1f0 irq 14 flags 0x04	# 1st IDE controller
     75       1.6       leo wdc1 		at isa? port 0x170 irq 15 flags 0x04	# 2nd IDE controller
     76      1.22       abs #endif /* MILAN_ISAIDE */
     77       1.5       leo 
     78       1.6       leo #if defined(MILAN_PCIIDE)
     79      1.13    bouyer pciide* 	at pci? dev ? function ? flags 0x0000	# GENERIC pciide driver
     80      1.13    bouyer acardide*	at pci? dev ? function ?	# Acard IDE controllers
     81      1.13    bouyer aceride* 	at pci? dev ? function ?	# Acer Lab IDE controllers
     82      1.16   thorpej artsata*	at pci? dev ? function ?	# Intel i31244 SATA controller
     83      1.13    bouyer cmdide* 	at pci? dev ? function ?	# CMD tech IDE controllers
     84      1.13    bouyer cypide* 	at pci? dev ? function ?	# Cypress IDE controllers
     85      1.13    bouyer hptide* 	at pci? dev ? function ?	# Triones/HighPoint IDE controllers
     86      1.13    bouyer optiide* 	at pci? dev ? function ?	# Opti IDE controllers
     87      1.13    bouyer pdcide* 	at pci? dev ? function ?	# Promise IDE controllers
     88      1.17    bouyer pdcsata* 	at pci? dev ? function ?	# Promise SATA150 controllers
     89      1.14   thorpej satalink*	at pci? dev ? function ?	# SiI SATALink controllers
     90      1.13    bouyer siside* 	at pci? dev ? function ?	# SiS IDE controllers
     91      1.13    bouyer slide*  	at pci? dev ? function ?	# Symphony Labs IDE controllers
     92      1.13    bouyer viaide* 	at pci? dev ? function ?	# VIA/AMD/Nvidia IDE controllers
     93      1.22       abs #endif /* MILAN_ISAIDE */
     94      1.15   thorpej 
     95      1.15   thorpej atabus*		at ata? channel ?
     96       1.2       leo 
     97       1.2       leo #
     98       1.2       leo # The Milan uses wscons
     99       1.2       leo #
    100       1.5       leo vga0 		at pci? dev ? function ?	# a PCI VGA card
    101       1.5       leo wsdisplay* 	at vga? console ?		# as a wscons console
    102       1.5       leo pckbc0 		at isa? 			# PC keyboard controller
    103       1.3       leo pckbd* 		at pckbc?			# PC keyboard
    104       1.5       leo wskbd* 		at pckbd? console ?		# wscons keyboard
    105       1.1       leo 
    106      1.12    bouyer # ATA devices
    107      1.12    bouyer wd*		at atabus? drive ?
    108      1.12    bouyer atapibus* 	at atabus?				# ATAPI bus support
    109       1.1       leo # ATAPI devices
    110       1.5       leo cd* 		at atapibus? drive ?		# ATAPI CD-ROM drives
    111