MILAN.in revision 1.10
1 # 2 # $NetBSD: MILAN.in,v 1.10 2002/06/15 21:44:07 leo Exp $ 3 # 4 # Milan 5 # 6 # This configuration file is for a generic Milan 7 # 8 9 #include "GENERIC.in" 10 11 # 12 # For the moment, the MILAN will be the only one to use wscons, so define 13 # the wscons options here too for the moment. 14 # wscons options 15 # 16 # builtin terminal emulations 17 #options WSEMUL_SUN # sun terminal emulation 18 options WSEMUL_VT100 # VT100 / VT220 emulation 19 # different kernel output - see dev/wscons/wsdisplayvar.h 20 # XXX: Since the Milan VGA works in monochrome for the moment, _only_ 21 # use black and white here! 22 options WS_KERNEL_FG=WSCOL_WHITE 23 options WS_KERNEL_BG=WSCOL_BLACK 24 25 # compatibility to other console drivers 26 #options WSDISPLAY_COMPAT_USL # VT handling 27 #options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 28 29 # see dev/pckbc/wskbdmap_mfii.c for implemented layouts 30 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 31 # allocate a number of virtual screens at autoconfiguration time 32 options WSDISPLAY_DEFAULTSCREENS=4 33 # use a large software cursor that doesn't blink 34 options PCDISPLAY_SOFTCURSOR 35 # modify the screen type of the console; defaults to "80x25" 36 #options VGA_CONSOLE_SCREENTYPE="\"80x25\"" 37 38 # 39 # The following sections describe various hardware options. 40 # 41 42 isabus0 at mainbus0 # ISA-bus 43 isa0 at isabus0 44 pcibus0 at mainbus0 # PCI-bus 45 pci0 at pcibus0 46 nvr0 at mainbus0 # nvram driver 47 ser0 at mainbus0 48 fdcisa0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy contr. 49 fdisa0 at fdcisa0 drive 0 50 51 # 52 # Ok, the stuff below requires some explanation... 53 # Initially, when Atari started with IDE on the Falcon, they decided to 54 # swap the bytelanes on the IDE controller. So all data on the disk was 55 # byteswapped and all CDROM drivers had to byteswap the data to make 56 # this nice idea work... To remain compatible with the 'current' drivers, 57 # this scheme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan 58 # however, the change was reverted. But... now the hardware is connected to 59 # a little endian (ISA) bus, in PIO mode this is essentially the same as 60 # swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode 61 # provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data 62 # on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER 63 # developers have thought up a solution, you can make a byteswapped disk 64 # during the partioning with HDDRIVER and TOS supports booting from it! 65 # Ok, now you have to choose: 66 # - If _none_ of your disks are marked byteswapped by HDDRIVER, choose 67 # the MILAN-ISAIDE version. 68 # - If _all_ of your disks are byteswapped, use the MILAN-PCIIDE version 69 # The is no way to mix things! 70 # 71 72 #if defined(MILAN_ISAIDE) 73 # wdc on ISA with flags = WDC_OPTIONS_ATA_NOSTREAM! 74 wdc0 at isa? port 0x1f0 irq 14 flags 0x04 # 1st IDE controller 75 wdc1 at isa? port 0x170 irq 15 flags 0x04 # 2nd IDE controller 76 wd* at wdc? channel ? drive ? 77 atapibus* at wdc? channel ? # ATAPI bus support 78 #endif 79 80 #if defined(MILAN_PCIIDE) 81 pciide* at pci? dev ? function ? flags 0x0000 # 2 PCIIDE channels 82 wd* at pciide? channel ? drive ? flags 0x0000 83 atapibus* at pciide? channel ? # ATAPI bus support 84 #endif 85 86 # 87 # The Milan uses wscons 88 # XXX without the __HAVE_NWSCONS option, the keyboard won't work... 89 # 90 options __HAVE_NWSCONS 91 vga0 at pci? dev ? function ? # a PCI VGA card 92 wsdisplay* at vga? console ? # as a wscons console 93 pckbc0 at isa? # PC keyboard controller 94 pckbd* at pckbc? # PC keyboard 95 wskbd* at pckbd? console ? # wscons keyboard 96 97 # ATAPI devices 98 cd* at atapibus? drive ? # ATAPI CD-ROM drives 99
Indexes created Fri Oct 03 02:09:57 GMT 2025