MILAN.in revision 1.30 1 #
2 # $NetBSD: MILAN.in,v 1.30 2022/08/15 04:40:20 tsutsui Exp $
3 #
4 # Milan
5 #
6 # This configuration file is for a generic Milan
7 #
8
9 #include "GENERIC.in"
10
11 #
12 # For the moment, the MILAN will be the only one to use wscons, so define
13 # the wscons options here too for the moment.
14 # wscons options
15 #
16 # builtin terminal emulations
17 #options WSEMUL_SUN # sun terminal emulation
18 options WSEMUL_VT100 # VT100 / VT220 emulation
19 # different kernel output - see dev/wscons/wsdisplayvar.h
20 # XXX: Since the Milan VGA works in monochrome for the moment, _only_
21 # use black and white here!
22 options WS_KERNEL_FG=WSCOL_WHITE
23 options WS_KERNEL_BG=WSCOL_BLACK
24
25 # compatibility to other console drivers
26 options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
27 #options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
28
29 # see dev/pckbport/wskbdmap_mfii.c for implemented layouts
30 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
31 # allocate a number of virtual screens at autoconfiguration time
32 options WSDISPLAY_DEFAULTSCREENS=4
33 # use a large software cursor that doesn't blink
34 options PCDISPLAY_SOFTCURSOR
35 # modify the screen type of the console; defaults to "80x25"
36 #options VGA_CONSOLE_SCREENTYPE="\"80x25\""
37 # use explicit WSDISPLAY_FONTENC_IBM font that MI vga(4) assumes
38 options FONT_VT220L8x16
39
40 #
41 # The following sections describe various hardware options.
42 #
43
44 isab0 at mainbus0 # ISA-bus
45 isa0 at isab0
46 pcib0 at mainbus0 # PCI-bus
47 pci0 at pcib0
48 nvr0 at mainbus0 # nvram driver
49 ser0 at mainbus0
50 fdcisa0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy contr.
51 fdisa0 at fdcisa0 drive 0
52
53 #
54 # Ok, the stuff below requires some explanation...
55 # Initially, when Atari started with IDE on the Falcon, they decided to
56 # swap the bytelanes on the IDE controller. So all data on the disk was
57 # byteswapped and all CDROM drivers had to byteswap the data to make
58 # this nice idea work... To remain compatible with the 'current' drivers,
59 # this scheme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan
60 # however, the change was reverted. But... now the hardware is connected to
61 # a little endian (ISA) bus, in PIO mode this is essentially the same as
62 # swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode
63 # provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data
64 # on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER
65 # developers have thought up a solution, you can make a byteswapped disk
66 # during the partitioning with HDDRIVER and TOS supports booting from it!
67 # Ok, now you have to choose:
68 # - If _none_ of your disks are marked byteswapped by HDDRIVER, choose
69 # the MILAN-ISAIDE version.
70 # - If _all_ of your disks are byteswapped, use the MILAN-PCIIDE version
71 # The is no way to mix things!
72 #
73
74 #if defined(MILAN_ISAIDE)
75 # wdc on ISA with flags = WDC_OPTIONS_ATA_NOSTREAM!
76 wdc0 at isa? port 0x1f0 irq 14 flags 0x04 # 1st IDE controller
77 wdc1 at isa? port 0x170 irq 15 flags 0x04 # 2nd IDE controller
78 #endif /* MILAN_ISAIDE */
79
80 #if defined(MILAN_PCIIDE)
81 pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
82 #acardide* at pci? dev ? function ? # Acard IDE controllers
83 #aceride* at pci? dev ? function ? # Acer Lab IDE controllers
84 #artsata* at pci? dev ? function ? # Intel i31244 SATA controller
85 #cmdide* at pci? dev ? function ? # CMD tech IDE controllers
86 #cypide* at pci? dev ? function ? # Cypress IDE controllers
87 #hptide* at pci? dev ? function ? # Triones/HighPoint IDE controllers
88 #optiide* at pci? dev ? function ? # Opti IDE controllers
89 #pdcide* at pci? dev ? function ? # Promise IDE controllers
90 #pdcsata* at pci? dev ? function ? # Promise SATA150 controllers
91 piixide* at pci? dev ? function ? # Intel IDE controllers
92 #satalink* at pci? dev ? function ? # SiI SATALink controllers
93 #siside* at pci? dev ? function ? # SiS IDE controllers
94 #slide* at pci? dev ? function ? # Symphony Labs IDE controllers
95 #viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers
96 #endif /* MILAN_PCIIDE */
97
98 atabus* at ata? channel ?
99
100 #
101 # The Milan uses wscons
102 #
103 vga0 at pci? dev ? function ? # a PCI VGA card
104 wsdisplay* at vga? console ? # as a wscons console
105 pckbc0 at isa? # PC keyboard controller
106 pckbd* at pckbc? # PC keyboard
107 pms* at pckbc? # PS/2 mouse
108 wskbd* at pckbd? console ? # wscons keyboard
109 wsmouse* at pms? # wscons mouse
110 pseudo-device wsmux # mouse & keyboard multiplexor
111
112 # ATA devices
113 wd* at atabus? drive ?
114 atapibus* at atabus? # ATAPI bus support
115 # ATAPI devices
116 cd* at atapibus? drive ? # ATAPI CD-ROM drives
117