xref: /src/sys/arch/atari/dev/fd.c

/*	$NetBSD: fd.c,v 1.7 1995/05/14 15:47:17 leo Exp $	*/

/*
 * Copyright (c) 1995 Leo Weppelman.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Leo Weppelman.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * This file contains a driver for the Floppy Disk Controller (FDC)
 * on the Atari TT. It uses the WD 1772 chip, modified for steprates.
 *
 * The ST floppy disk controller shares the access to the DMA circuitry
 * with other devices. For this reason the floppy disk controller makes
 * use of some special DMA accessing code.
 *
 * Interrupts from the FDC are in fact DMA interrupts which get their
 * first level handling in 'dma.c' . If the floppy driver is currently
 * using DMA the interrupt is signalled to 'fdcint'.
 *
 * TODO:
 *   - Test it with 2 drives (I don't have them)
 *   - Test it with an HD-drive (Don't have that either)
 *   - Finish ioctl's
 */

#include	<sys/param.h>
#include	<sys/systm.h>
#include	<sys/kernel.h>
#include	<sys/malloc.h>
#include	<sys/buf.h>
#include	<sys/device.h>
#include	<sys/ioctl.h>
#include	<sys/fcntl.h>
#include	<sys/conf.h>
#include	<sys/disklabel.h>
#include	<sys/disk.h>
#include	<sys/dkbad.h>
#include	<atari/atari/device.h>
#include	<machine/disklabel.h>
#include	<machine/iomap.h>
#include	<machine/mfp.h>
#include	<machine/dma.h>
#include	<machine/video.h>
#include	<atari/dev/fdreg.h>

/*
 * Be verbose for debugging
 */
/*#define FLP_DEBUG	1 */

#define	FDC_MAX_DMA_AD	0x1000000	/* No DMA possible beyond	*/

/* Parameters for the disk drive. */
#define SECTOR_SIZE	512	/* physical sector size in bytes	*/
#define NR_DRIVES	2	/* maximum number of drives		*/
#define NR_TYPES	3	/* number of diskette/drive combinations*/
#define MAX_ERRORS	10	/* how often to try rd/wt before quitting*/
#define STEP_DELAY	6000	/* 6ms (6000us) delay after stepping	*/


#define	INV_TRK		32000	/* Should fit in unsigned short		*/
#define	INV_PART	NR_TYPES

/*
 * Driver states
 */
#define	FLP_IDLE	0x00	/* floppy is idle			*/
#define	FLP_MON		0x01	/* idle with motor on			*/
#define	FLP_STAT	0x02	/* determine floppy status		*/
#define	FLP_XFER	0x04	/* read/write data from floppy		*/

/*
 * Timer delay's
 */
#define	FLP_MONDELAY	(3 * hz)	/* motor-on delay		*/
#define	FLP_XFERDELAY	(2 * hz)	/* timeout on transfer		*/


#define	b_block		b_resid		/* FIXME: this is not the place	*/

/*
 * Global data for all physical floppy devices
 */
static short	selected = 0;		/* drive/head currently selected*/
static short	motoron  = 0;		/* motor is spinning		*/
static short	nopens   = 0;		/* Number of opens executed	*/

static short	fd_state = FLP_IDLE;	/* Current driver state		*/
static int	lock_stat= 0;		/* dma locking status		*/
static short	fd_cmd   = 0;		/* command being executed	*/
static char	*fd_error= NULL;	/* error from fd_xfer_ok()	*/

/*
 * Private per device data
 */
struct fd_softc {
	struct dkdevice dkdev;
	struct buf	bufq;		/* queue of buf's		*/
	int		unit;		/* unit for atari controlling hw*/
	int		nheads;		/* number of heads in use	*/
	int		nsectors;	/* number of sectors/track	*/
	int		nblocks;	/* number of blocks on disk	*/
	int		curtrk;		/* track head positioned on	*/
	short		flags;		/* misc flags			*/
	short		part;		/* Current open partition	*/
	int		sector;		/* logical sector for I/O	*/
	caddr_t		io_data;	/* KVA for data transfer	*/
	int		io_bytes;	/* bytes left for I/O		*/
	int		io_dir;		/* B_READ/B_WRITE		*/
	int		errcnt;		/* current error count		*/
	u_char		*bounceb;	/* Bounce buffer		*/

};

/*
 * Flags in fd_softc:
 */
#define FLPF_NOTRESP	0x001		/* Unit not responding		*/
#define FLPF_ISOPEN	0x002		/* Unit is open			*/
#define FLPF_ISHD	0x004		/* Use High Density		*/
#define FLPF_HAVELAB	0x008		/* We have a valid label	*/
#define FLPF_BOUNCE	0x010		/* Now using the bounce buffer	*/
#define FLPF_WRTPROT	0x020		/* Unit is write-protected	*/
#define FLPF_EMPTY	0x040		/* Unit is empty		*/
#define FLPF_INOPEN	0x080		/* Currently being opened	*/
#define FLPF_GETSTAT	0x100		/* Getting unit status		*/

struct fd_types {
	int		nheads;		/* Heads in use			*/
	int		nsectors;	/* sectors per track		*/
	int		nblocks;	/* number of blocks		*/
} fdtypes[NR_TYPES] = {
		{ 1,  9,  720 },	/* 360  Kb	*/
		{ 2,  9, 1440 },	/* 720  Kb	*/
		{ 1, 18, 2880 },	/* 1.44 Mb	*/
};

typedef void	(*FPV)();

/*
 * Private drive functions....
 */
static void	fdstart __P((struct fd_softc *));
static void	fddone __P((struct fd_softc *));
static void	fdstatus __P((struct fd_softc *));
static void	fd_xfer __P((struct fd_softc *));
static void	fdcint __P((struct fd_softc *));
static int	fd_xfer_ok __P((struct fd_softc *));
static void	fdmotoroff __P((struct fd_softc *));
static int	fdminphys __P((struct buf *));
static void	fdtestdrv __P((struct fd_softc *));
static int	fdgetdisklabel __P((struct fd_softc *, dev_t));

extern __inline__ u_char read_fdreg(u_short regno)
{
	DMA->dma_mode = regno;
	return(DMA->dma_data);
}

extern __inline__ void write_fdreg(u_short regno, u_short val)
{
	DMA->dma_mode = regno;
	DMA->dma_data = val;
}

extern __inline__ u_char read_dmastat(void)
{
	DMA->dma_mode = FDC_CS | DMA_SCREG;
	return(DMA->dma_stat);
}

/*
 * Autoconfig stuff....
 */
static int	fdcmatch __P((struct device *, struct cfdata *, void *));
static int	fdcprint __P((void *, char *));
static void	fdcattach __P((struct device *, struct device *, void *));

struct cfdriver fdccd = {
	NULL, "fdc", (cfmatch_t)fdcmatch, fdcattach, DV_DULL,
	sizeof(struct device), NULL, 0 };

static int
fdcmatch(pdp, cfp, auxp)
struct device	*pdp;
struct cfdata	*cfp;
void		*auxp;
{
	if(strcmp("fdc", auxp) || cfp->cf_unit != 0)
		return(0);
	return(1);
}

static void
fdcattach(pdp, dp, auxp)
struct device	*pdp, *dp;
void		*auxp;
{
	struct fd_softc	fdsoftc;
	int		i, nfound = 0;

	printf("\n");
	for(i = 0; i < NR_DRIVES; i++) {

		/*
		 * Test if unit is present
		 */
		fdsoftc.unit  = i;
		fdsoftc.flags = 0;
		st_dmagrab(fdcint, fdtestdrv, &fdsoftc, &lock_stat, 0);
		st_dmafree(&fdsoftc, &lock_stat);

		if(!(fdsoftc.flags & FLPF_NOTRESP)) {
			nfound++;
			config_found(dp, (void*)i, fdcprint);
		}
	}

	if(nfound) {

		/*
		 * enable disk related interrupts
		 */
		MFP->mf_ierb  |= IB_DINT;
		MFP->mf_iprb  &= ~IB_DINT;
		MFP->mf_imrb  |= IB_DINT;
	}
}

static int
fdcprint(auxp, pnp)
void	*auxp;
char	*pnp;
{
	return(UNCONF);
}

static int	fdmatch __P((struct device *, struct cfdata *, void *));
static void	fdattach __P((struct device *, struct device *, void *));
	   void fdstrategy __P((struct buf *));
struct dkdriver fddkdriver = { fdstrategy };

struct cfdriver fdcd = {
	NULL, "fd", (cfmatch_t)fdmatch, fdattach, DV_DISK,
	sizeof(struct fd_softc), NULL, 0 };

static int
fdmatch(pdp, cfp, auxp)
struct device	*pdp;
struct cfdata	*cfp;
void		*auxp;
{
	int	unit = (int)auxp;
	return(1);
}

static void
fdattach(pdp, dp, auxp)
struct device	*pdp, *dp;
void		*auxp;
{
	struct fd_softc	*sc;

	sc = (struct fd_softc *)dp;

	printf("\n");

	sc->dkdev.dk_driver = &fddkdriver;
}

fdioctl(dev, cmd, addr, flag, p)
dev_t		dev;
u_long		cmd;
int		flag;
caddr_t		addr;
struct proc	*p;
{
	struct fd_softc *sc;
	void		*data;

	sc = getsoftc(fdcd, DISKUNIT(dev));

	if((sc->flags & FLPF_HAVELAB) == 0)
		return(EBADF);

	switch(cmd) {
		case DIOCSBAD:
			return(EINVAL);
		case DIOCGDINFO:
			*(struct disklabel *)addr = sc->dkdev.dk_label;
			return(0);
		case DIOCGPART:
			((struct partinfo *)addr)->disklab =
				&sc->dkdev.dk_label;
			((struct partinfo *)addr)->part =
				&sc->dkdev.dk_label.d_partitions[DISKPART(dev)];
			return(0);
#ifdef notyet /* XXX LWP */
		case DIOCSRETRIES:
		case DIOCSSTEP:
		case DIOCSDINFO:
		case DIOCWDINFO:
		case DIOCWLABEL:
#endif /* notyet */
		default:
			return(ENOTTY);
	}
}

/*
 * Open the device. If this is the first open on both the floppy devices,
 * intialize the controller.
 * Note that partition info on the floppy device is used to distinguise
 * between 780Kb and 360Kb floppy's.
 *	partition 0: 360Kb
 *	partition 1: 780Kb
 */
Fdopen(dev, flags, devtype, proc)
dev_t		dev;
int		flags, devtype;
struct proc	*proc;
{
	struct fd_softc	*sc;
	int		sps;

#ifdef FLP_DEBUG
	printf("Fdopen dev=0x%x\n", dev);
#endif

	if(DISKPART(dev) >= NR_TYPES)
		return(ENXIO);

	if((sc = getsoftc(fdcd, DISKUNIT(dev))) == NULL)
		return(ENXIO);

	/*
	 * If no floppy currently open, reset the controller and select
	 * floppy type.
	 */
	if(!nopens) {

#ifdef FLP_DEBUG
		printf("Fdopen device not yet open\n");
#endif
		nopens++;
		write_fdreg(FDC_CS, IRUPT);
	}

	/*
	 * Sleep while other process is opening the device
	 */
	sps = splbio();
	while(sc->flags & FLPF_INOPEN)
		tsleep((caddr_t)sc, PRIBIO, "Fdopen", 0);
	splx(sps);

	if(!(sc->flags & FLPF_ISOPEN)) {
		/*
		 * Initialise some driver values.
		 */
		int	part = DISKPART(dev);
		void	*addr;

		sc->bufq.b_actf = NULL;
		sc->unit        = DISKUNIT(dev);
		sc->part        = part;
		sc->nheads	= fdtypes[part].nheads;
		sc->nsectors	= fdtypes[part].nsectors;
		sc->nblocks     = fdtypes[part].nblocks;
		sc->curtrk	= INV_TRK;
		sc->sector	= 0;
		sc->errcnt	= 0;
		sc->bounceb	= (u_char*)alloc_stmem(SECTOR_SIZE, &addr);
		if(sc->bounceb == NULL)
			return(ENOMEM); /* XXX */
		if(sc->nsectors > 9) /* XXX */
			sc->flags |= FLPF_ISHD;

		/*
		 * Go get write protect + loaded status
		 */
		sc->flags |= FLPF_INOPEN|FLPF_GETSTAT;
		sps = splbio();
		st_dmagrab(fdcint, fdstatus, sc, &lock_stat, 0);
		while(sc->flags & FLPF_GETSTAT)
			tsleep((caddr_t)sc, PRIBIO, "Fdopen", 0);
		splx(sps);
		wakeup((caddr_t)sc);

		if((sc->flags & FLPF_WRTPROT) && (flags & FWRITE)) {
			sc->flags = 0;
			return(EPERM);
		}
		if(sc->flags & FLPF_EMPTY) {
			sc->flags = 0;
			return(ENXIO);
		}
		sc->flags &= ~(FLPF_INOPEN|FLPF_GETSTAT);
		sc->flags |= FLPF_ISOPEN;
	}
	else {
		/*
		 * Multiply opens are granted when accessing the same type of
		 * floppy (eq. the same partition).
		 */
		if(sc->part != DISKPART(dev))
			return(ENXIO);	/* XXX temporarely out of business */
	}
	fdgetdisklabel(sc, dev);
#ifdef FLP_DEBUG
	printf("Fdopen open succeeded on type %d\n", sc->part);
#endif
}

fdclose(dev, flags, devtype, proc)
dev_t		dev;
int		flags, devtype;
struct proc	*proc;
{
	struct fd_softc	*sc;

	sc = getsoftc(fdcd, DISKUNIT(dev));
	free_stmem(sc->bounceb);
	sc->flags = 0;
	nopens--;

#ifdef FLP_DEBUG
	printf("Closed floppy device -- nopens: %d\n", nopens);
#endif
	return(0);
}

void
fdstrategy(bp)
struct buf	*bp;
{
	struct fd_softc	*sc;
	int		sps, nblocks;

	sc   = getsoftc(fdcd, DISKUNIT(bp->b_dev));

#ifdef FLP_DEBUG
	printf("fdstrategy: 0x%x\n", bp);
#endif

	/*
	 * check for valid partition and bounds
	 */
	nblocks = (bp->b_bcount + SECTOR_SIZE - 1) / SECTOR_SIZE;
	if((bp->b_blkno < 0) || ((bp->b_blkno + nblocks) >= sc->nblocks)) {
		if((bp->b_blkno == sc->nblocks) && (bp->b_flags & B_READ)) {
			/*
			 * Read 1 block beyond, return EOF
			 */
			bp->b_resid = bp->b_bcount;
			goto done;
		}
		/*
		 * Try to limit the size of the transaction, adjust count
		 * if we succeed.
		 */
		nblocks = sc->nblocks - bp->b_blkno;
		if((nblocks <= 0) || (bp->b_blkno < 0)) {
			bp->b_error  = EINVAL;
			bp->b_flags |= B_ERROR;
			goto done;
		}
		bp->b_bcount = nblocks * SECTOR_SIZE;
	}
	if(bp->b_bcount == 0)
		goto done;

	/*
	 * Set order info for disksort
	 */
	bp->b_block = bp->b_blkno / (sc->nsectors * sc->nheads);

	/*
	 * queue the buf and kick the low level code
	 */
	sps = splbio();
	disksort(&sc->bufq, bp);
	if(!lock_stat) {
		if(fd_state & FLP_MON)
			untimeout((FPV)fdmotoroff, (void*)sc);
		fd_state = FLP_IDLE;
		st_dmagrab(fdcint, fdstart, sc, &lock_stat, 0);
	}
	splx(sps);

	return;
done:
	bp->b_resid = bp->b_bcount;
	biodone(bp);
}

/*
 * no dumps to floppy disks thank you.
 */
int
fddump(dev_t dev)
{
	return(ENXIO);
}

/*
 * no dumps to floppy disks thank you.
 */
int
fdsize(dev)
dev_t dev;
{
	return(-1);
}

int
fdread(dev, uio)
dev_t		dev;
struct uio	*uio;
{
	return(physio(cdevsw[major(dev)].d_strategy, (struct buf *)NULL,
	    dev, B_READ, fdminphys, uio));
}

int
fdwrite(dev, uio)
dev_t		dev;
struct uio	*uio;
{
	return(physio(cdevsw[major(dev)].d_strategy, (struct buf *)NULL,
	    dev, B_WRITE, fdminphys, uio));
}

/*
 * Called through DMA-dispatcher, get status.
 */
static void
fdstatus(sc)
struct fd_softc	*sc;
{
#ifdef FLP_DEBUG
	printf("fdstatus\n");
#endif
	sc->errcnt = 0;
	fd_state   = FLP_STAT;

	/*
	 * Make sure the floppy controller is the correct density mode
	 */
	if(sc->flags & FLPF_ISHD)
		DMA->dma_drvmode |= (FDC_HDSET|FDC_HDSIG);
	else DMA->dma_drvmode &= ~(FDC_HDSET|FDC_HDSIG);
	fd_xfer(sc);
}

/*
 * Called through the dma-dispatcher. So we know we are the only ones
 * messing with the floppy-controler.
 * Initialize some fields in the fdsoftc for the state-machine and get
 * it going.
 */
static void
fdstart(sc)
struct fd_softc	*sc;
{
	struct buf	*bp;

	bp           = sc->bufq.b_actf;
	sc->sector   = bp->b_blkno;	/* Start sector for I/O		*/
	sc->io_data  = bp->b_data;	/* KVA base for I/O		*/
	sc->io_bytes = bp->b_bcount;	/* Transfer size in bytes	*/
	sc->io_dir   = bp->b_flags & B_READ;/* Direction of transfer	*/
	sc->errcnt   = 0;		/* No errors yet		*/
	fd_state     = FLP_XFER;	/* Yes, we're going to transfer	*/

	/*
	 * Make sure the floppy controller is the correct density mode
	 */
	if(sc->flags & FLPF_ISHD)
		DMA->dma_drvmode |= (FDC_HDSET|FDC_HDSIG);
	else DMA->dma_drvmode &= ~(FDC_HDSET|FDC_HDSIG);
	fd_xfer(sc);
}

/*
 * The current transaction is finished (for good or bad). Let go of
 * the the dma-resources. Call biodone() to finish the transaction.
 * Find a new transaction to work on.
 */
static void
fddone(sc)
register struct fd_softc	*sc;
{
	struct buf	*bp, *dp;
	struct fd_softc	*sc1;
	int		i, sps;

	/*
	 * Lower clock frequency of FDC (better for some old ones).
	 */
	DMA->dma_drvmode &= ~(FDC_HDSET|FDC_HDSIG);

	/*
	 * Give others a chance to use the dma.
	 */
	st_dmafree(sc, &lock_stat);


	if(fd_state != FLP_STAT) {
		/*
		 * Finish current transaction.
		 */
		sps = splbio();
		dp = &sc->bufq;
		bp = dp->b_actf;
		if(bp == NULL)
			panic("fddone");
		dp->b_actf = bp->b_actf;
		splx(sps);

#ifdef FLP_DEBUG
		printf("fddone: unit: %d, buf: %x, resid: %d\n",sc->unit,bp,
								sc->io_bytes);
#endif
		bp->b_resid = sc->io_bytes;
		biodone(bp);
	}
	fd_state = FLP_MON;

	if(lock_stat)
		return;		/* XXX Is this possible?	*/

	/*
	 * Find a new transaction on round-robin basis.
	 */
	for(i = sc->unit + 1; ;i++) {
		if(i >= fdcd.cd_ndevs)
			i = 0;
		if((sc1 = fdcd.cd_devs[i]) == NULL)
			continue;
		if(sc1->bufq.b_actf)
			break;
		if(i == sc->unit) {
			timeout((FPV)fdmotoroff, (void*)sc, FLP_MONDELAY);
#ifdef FLP_DEBUG
			printf("fddone: Nothing to do\n");
#endif
			return;	/* No work */
		}
	}
	fd_state = FLP_IDLE;
#ifdef FLP_DEBUG
	printf("fddone: Staring job on unit %d\n", sc1->unit);
#endif
	st_dmagrab(fdcint, fdstart, sc1, &lock_stat, 0);
}

/****************************************************************************
 * The following functions assume to be running as a result of a            *
 * disk-interrupt (e.q. spl = splbio).				            *
 * They form the finit-state machine, the actual driver.                    *
 *                                                                          *
 *	fdstart()/ --> fd_xfer() -> activate hardware                       *
 *  fdopen()          ^                                                     *
 *                    |                                                     *
 *                    +-- not ready -<------------+                         *
 *                                                |                         *
 *  fdmotoroff()/ --> fdcint() -> fd_xfer_ok() ---+                         *
 *  h/w interrupt                 |                                         *
 *                               \|/                                        *
 *                            finished ---> fdone()                         *
 *                                                                          *
 ****************************************************************************/
static void
fd_xfer(sc)
struct fd_softc	*sc;
{
	register int	head = 0;
	register int	track, sector, hbit;
		 int	i;
		 u_long	phys_addr;

	switch(fd_state) {
	    case FLP_XFER:
		/*
		 * Calculate head/track values
		 */
		track  = sc->sector / sc->nsectors;
		head   = track % sc->nheads;
		track  = track / sc->nheads;
#ifdef FLP_DEBUG
		printf("fd_xfer: sector:%d,head:%d,track:%d\n", sc->sector,head,
								track);
#endif
		break;

	    case FLP_STAT:
		/*
		 * FLP_STAT only wants to recalibrate
		 */
		sc->curtrk = INV_TRK;
		break;
	    default:
		panic("fd_xfer: wrong state (0x%x)", fd_state);
	}

	/*
	 * Determine if the controller should check spin-up.
	 */
	hbit = motoron ? HBIT : 0;
	motoron = 1;

	/*
	 * Select the right unit and head.
	 */
	i = (sc->unit ? PA_FLOP1 : PA_FLOP0) | head;
	if(i != selected) {
		selected = i;
		SOUND->sd_selr = YM_IOA;
		SOUND->sd_wdat = (SOUND->sd_rdat & 0xF8) | (i ^ 0x07);
	}

	if(sc->curtrk == INV_TRK) {
		/*
		 * Recalibrate, since we lost track of head positioning.
		 * The floppy disk controller has no way of determining its
		 * absolute arm position (track).  Instead, it steps the
		 * arm a track at a time and keeps track of where it
		 * thinks it is (in software).  However, after a SEEK, the
		 * hardware reads information from the diskette telling
		 * where the arm actually is.  If the arm is in the wrong place,
		 * a recalibration is done, which forces the arm to track 0.
		 * This way the controller can get back into sync with reality.
		 */
		write_fdreg(FDC_CS, RESTORE|VBIT|hbit);
		fd_cmd = RESTORE;
		timeout((FPV)fdmotoroff, (void*)sc, FLP_XFERDELAY);

#ifdef FLP_DEBUG
		printf("fd_xfer:Recalibrating drive %d\n", sc->unit);
#endif
		return;
	}

	write_fdreg(FDC_TR, sc->curtrk);

	/*
	 * Issue a SEEK command on the indicated drive unless the arm is
	 * already positioned on the correct track.
	 */
	if(track != sc->curtrk) {
		sc->curtrk = track;	/* be optimistic */
		write_fdreg(FDC_DR, track);
		write_fdreg(FDC_CS, SEEK|RATE6|VBIT|hbit);
		timeout((FPV)fdmotoroff, (void*)sc, FLP_XFERDELAY);
		fd_cmd = SEEK;
#ifdef FLP_DEBUG
		printf("fd_xfer:Seek to track %d on drive %d\n",track,sc->unit);
#endif
		return;
	}

	/*
	 * The drive is now on the proper track. Read or write 1 block.
	 */
	sector = sc->sector % sc->nsectors;
	sector++;	/* start numbering at 1 */

	write_fdreg(FDC_SR, sector);

	phys_addr = (u_long)kvtop(sc->io_data);
	if(phys_addr >= FDC_MAX_DMA_AD) {
		/*
		 * We _must_ bounce this address
		 */
		phys_addr = (u_long)kvtop(sc->bounceb);
		if(sc->io_dir == B_WRITE)
			bcopy(sc->io_data, sc->bounceb, SECTOR_SIZE);
		sc->flags |= FLPF_BOUNCE;
	}
	st_dmaaddr_set((caddr_t)phys_addr);	/* DMA address setup */

#ifdef FLP_DEBUG
	printf("fd_xfer:Start io (io_addr:%x)\n", kvtop(sc->io_data));
#endif

	if(sc->io_dir == B_READ) {
		/* Issue the command */
		st_dmacomm(DMA_FDC | DMA_SCREG, 1);
		write_fdreg(FDC_CS, F_READ|hbit);
		fd_cmd = F_READ;
	}
	else {
		/* Issue the command */
		st_dmacomm(DMA_WRBIT | DMA_FDC | DMA_SCREG, 1);
		write_fdreg(DMA_WRBIT | FDC_CS, F_WRITE|hbit|EBIT|PBIT);
		fd_cmd = F_WRITE;
	}
	timeout((FPV)fdmotoroff, (void*)sc, FLP_XFERDELAY);
}

/* return values of fd_xfer_ok(): */
#define X_OK			0
#define X_AGAIN			1
#define X_ERROR			2
#define X_FAIL			3

/*
 * Hardware interrupt function.
 */
static void
fdcint(sc)
struct fd_softc	*sc;
{
	struct	buf	*bp;

#ifdef FLP_DEBUG
	printf("fdcint: unit = %d\n", sc->unit);
#endif

	/*
	 * Cancel timeout (we made it, didn't we)
	 */
	untimeout((FPV)fdmotoroff, (void*)sc);

	switch(fd_xfer_ok(sc)) {
		case X_ERROR :
			if(++(sc->errcnt) < MAX_ERRORS) {
				/*
				 * Command failed but still retries left.
				 */
				break;
			}
			/* FALL THROUGH */
		case X_FAIL  :
			/*
			 * Non recoverable error. Fall back to motor-on
			 * idle-state.
			 */
			if(fd_state == FLP_STAT) {
				sc->flags |= FLPF_EMPTY;
				sc->flags &= ~FLPF_GETSTAT;
				wakeup((caddr_t)sc);
				fddone(sc);
				return;
			}

			bp = sc->bufq.b_actf;

			bp->b_error  = EIO;
			bp->b_flags |= B_ERROR;
			fd_state = FLP_MON;
			if(fd_error != NULL) {
				printf("Floppy error: %s\n", fd_error);
				fd_error = NULL;
			}

			break;
		case X_AGAIN:
			/*
			 * Start next part of state machine.
			 */
			break;
		case X_OK:
			/*
			 * Command ok and finished. Reset error-counter.
			 * If there are no more bytes to transfer fall back
			 * to motor-on idle state.
			 */
			sc->errcnt = 0;

			if(fd_state == FLP_STAT) {
				sc->flags &= ~FLPF_GETSTAT;
				wakeup((caddr_t)sc);
				fddone(sc);
				return;
			}

			if((sc->flags & FLPF_BOUNCE) && (sc->io_dir == B_READ))
				bcopy(sc->bounceb, sc->io_data, SECTOR_SIZE);
			sc->flags &= ~FLPF_BOUNCE;

			sc->sector++;
			sc->io_data  += SECTOR_SIZE;
			sc->io_bytes -= SECTOR_SIZE;
			if(sc->io_bytes <= 0)
				fd_state = FLP_MON;
	}
	if(fd_state == FLP_MON)
		fddone(sc);
	else fd_xfer(sc);
}

/*
 * Determine status of last command. Should only be called through
 * 'fdcint()'.
 * Returns:
 *	X_ERROR : Error on command; might succeed next time.
 *	X_FAIL  : Error on command; will never succeed.
 *	X_AGAIN : Part of a command succeeded, call 'fd_xfer()' to complete.
 *	X_OK	: Command succeeded and is complete.
 *
 * This function only affects sc->curtrk.
 */
static int
fd_xfer_ok(sc)
register struct fd_softc	*sc;
{
	register int	status;

#ifdef FLP_DEBUG
	printf("fd_xfer_ok: cmd: 0x%x, state: 0x%x\n", fd_cmd, fd_state);
#endif
	switch(fd_cmd) {
		case IRUPT:
			/*
			 * Timeout. Force a recalibrate before we try again.
			 */
			fd_error = "Timeout";
			sc->curtrk = INV_TRK;
			return(X_ERROR);
		case F_READ:
			/*
			 * Test for DMA error
			 */
			status = read_dmastat();
			if(!(status & DMAOK)) {
				fd_error = "Dma error";
				return(X_ERROR);
			}
			/*
			 * Get controller status and check for errors.
			 */
			status = read_fdreg(FDC_CS);
			if(status & (RNF | CRCERR | LD_T00)) {
				fd_error = "Read error";
				if(status & RNF)
					sc->curtrk = INV_TRK;
				return(X_ERROR);
			}
			break;
		case F_WRITE:
			/*
			 * Test for DMA error
			 */
			status = read_dmastat();
			if(!(status & DMAOK)) {
				fd_error = "Dma error";
				return(X_ERROR);
			}
			/*
			 * Get controller status and check for errors.
			 */
			status = read_fdreg(FDC_CS);
			if(status & WRI_PRO) {
				fd_error = "Write protected";
				return(X_FAIL);
			}
			if(status & (RNF | CRCERR | LD_T00)) {
				fd_error = "Write error";
				sc->curtrk = INV_TRK;
				return(X_ERROR);
			}
			break;
		case SEEK:
			status = read_fdreg(FDC_CS);
			if(status & (RNF | CRCERR)) {
				fd_error = "Seek error";
				sc->curtrk = INV_TRK;
				return(X_ERROR);
			}
			return(X_AGAIN);
		case RESTORE:
			/*
			 * Determine if the recalibration succeeded.
			 */
			status = read_fdreg(FDC_CS);
			if(status & RNF) {
				fd_error = "Recalibrate error";
				/* reset controller */
				write_fdreg(FDC_CS, IRUPT);
				sc->curtrk = INV_TRK;
				return(X_ERROR);
			}
			sc->curtrk = 0;
			if(fd_state == FLP_STAT) {
				if(status & WRI_PRO)
					sc->flags |= FLPF_WRTPROT;
				break;
			}
			return(X_AGAIN);
		default:
			fd_error = "Driver error: fd_xfer_ok : Unknown state";
			return(X_FAIL);
	}
	return(X_OK);
}

/*
 * All timeouts will call this function.
 */
static void
fdmotoroff(sc)
struct fd_softc	*sc;
{
	int	sps, wrbit;

	/*
	 * Get at harware interrupt level
	 */
	sps = splbio();

#if FLP_DEBUG
	printf("fdmotoroff, state = 0x%x\n", fd_state);
#endif

	switch(fd_state) {
		case FLP_STAT :
		case FLP_XFER :
			/*
			 * Timeout during a transfer; cancel transaction
			 * set command to 'IRUPT'.
			 * A drive-interrupt is simulated to trigger the state
			 * machine.
			 */
			/*
			 * Cancel current transaction
			 */
			wrbit = (fd_cmd == F_WRITE) ? DMA_WRBIT : 0;
			fd_cmd = IRUPT;
			write_fdreg(FDC_CS, wrbit|IRUPT);

			/*
			 * Simulate floppy interrupt.
			 */
			fdcint(sc);
			return;
		case FLP_MON  :
			/*
			 * Turn motor off.
			 */
			if(selected) {
				SOUND->sd_selr = YM_IOA;
				SOUND->sd_wdat = SOUND->sd_rdat | 0x07;
				motoron = selected = 0;
			}
			fd_state = FLP_IDLE;
			break;
	}
	splx(sps);
}

/*
 * min byte count to whats left of the track in question
 */
static int
fdminphys(bp)
struct buf	*bp;
{
	struct fd_softc	*sc;
	int		sec, toff, tsz;

	if((sc = getsoftc(fdcd, DISKUNIT(bp->b_dev))) == NULL)
		return(ENXIO);

	sec  = bp->b_blkno % (sc->nsectors * sc->nheads);
	toff = sec * SECTOR_SIZE;
	tsz  = sc->nsectors * sc->nheads * SECTOR_SIZE;

#ifdef FLP_DEBUG
	printf("fdminphys: before %d", bp->b_bcount);
#endif

	bp->b_bcount = min(bp->b_bcount, tsz - toff);

#ifdef FLP_DEBUG
	printf(" after %d\n", bp->b_bcount);
#endif

	return(bp->b_bcount);
}

/*
 * Used to find out wich drives are actually connected. We do this by issueing
 * is 'RESTORE' command and check if the 'track-0' bit is set. This also works
 * if the drive is present but no floppy is inserted.
 */
static void
fdtestdrv(fdsoftc)
struct fd_softc	*fdsoftc;
{
	int		i, status;

	/*
	 * Select the right unit and head.
	 */
	i = fdsoftc->unit ? PA_FLOP1 : PA_FLOP0;
	if(i != selected) {
		selected = i;
		SOUND->sd_selr = YM_IOA;
		SOUND->sd_wdat = (SOUND->sd_rdat & 0xF8) | (i ^ 0x07);
	}

	write_fdreg(FDC_CS, RESTORE|VBIT|HBIT);

	/*
	 * Wait for about 2 seconds.
	 */
	delay(2000000);

	status = read_fdreg(FDC_CS);
	if(status & (RNF|BUSY))
		write_fdreg(FDC_CS, IRUPT);	/* reset controller */

	if(!(status & LD_T00))
		fdsoftc->flags |= FLPF_NOTRESP;
}

/*
 * Build disk label. For now we only create a label from what we know
 * from 'sc'.
 */
static int
fdgetdisklabel(sc, dev)
struct fd_softc *sc;
dev_t			dev;
{
	struct disklabel	*lp, *dlp;
	int			part;

	/*
	 * If we already got one, get out.
	 */
	if(sc->flags & FLPF_HAVELAB)
		return(0);

#ifdef FLP_DEBUG
	printf("fdgetdisklabel()\n");
#endif

	part = DISKPART(dev);
	lp   = &sc->dkdev.dk_label;
	bzero(lp, sizeof(struct disklabel));

	lp->d_secsize     = SECTOR_SIZE;
	lp->d_ntracks     = sc->nheads;
	lp->d_nsectors    = sc->nsectors;
	lp->d_secpercyl   = lp->d_ntracks * lp->d_nsectors;
	lp->d_ncylinders  = sc->nblocks / lp->d_secpercyl;
	lp->d_secperunit  = sc->nblocks;

	lp->d_type        = DTYPE_FLOPPY;
	lp->d_rpm         = 300; 	/* good guess I suppose.	*/
	lp->d_interleave  = 1;		/* FIXME: is this OK?		*/
	lp->d_bbsize      = 0;
	lp->d_sbsize      = 0;
	lp->d_npartitions = part + 1;
	lp->d_trkseek     = STEP_DELAY;
	lp->d_magic       = DISKMAGIC;
	lp->d_magic2      = DISKMAGIC;
	lp->d_checksum    = dkcksum(lp);
	lp->d_partitions[part].p_size   = lp->d_secperunit;
	lp->d_partitions[part].p_fstype = FS_UNUSED;
	lp->d_partitions[part].p_fsize  = 1024;
	lp->d_partitions[part].p_frag   = 8;
	sc->flags        |= FLPF_HAVELAB;

	return(0);
}