Home | History | Annotate | Line # | Download | only in dev
lpt.c revision 1.29.2.1 
      1 /*	$NetBSD: lpt.c,v 1.29.2.1 2008/06/17 09:13:55 yamt Exp $ */
      2 
      3 /*
      4  * Copyright (c) 1996 Leo Weppelman
      5  * Copyright (c) 1993, 1994 Charles M. Hannum.
      6  * Copyright (c) 1990 William F. Jolitz, TeleMuse
      7  * All rights reserved.
      8  *
      9  * Redistribution and use in source and binary forms, with or without
     10  * modification, are permitted provided that the following conditions
     11  * are met:
     12  * 1. Redistributions of source code must retain the above copyright
     13  *    notice, this list of conditions and the following disclaimer.
     14  * 2. Redistributions in binary form must reproduce the above copyright
     15  *    notice, this list of conditions and the following disclaimer in the
     16  *    documentation and/or other materials provided with the distribution.
     17  * 3. All advertising materials mentioning features or use of this software
     18  *    must display the following acknowledgement:
     19  *	This software is a component of "386BSD" developed by
     20  *	William F. Jolitz, TeleMuse.
     21  * 4. Neither the name of the developer nor the name "386BSD"
     22  *    may be used to endorse or promote products derived from this software
     23  *    without specific prior written permission.
     24  *
     25  * THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND
     26  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     27  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     28  * ARE DISCLAIMED.  IN NO EVENT SHALL THE DEVELOPER BE LIABLE
     29  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     30  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     31  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     32  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     33  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     34  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     35  * SUCH DAMAGE.
     36  */
     37 
     38 /*
     39  * Device Driver originally written for AT parallel printer port. Now
     40  * drives the printer port on the YM2149.
     41  *
     42  * THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ
     43  * AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS
     44  * SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT.
     45  * THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT
     46  * NOT MAKE USE OF THIS WORK.
     47  *
     48  * FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED
     49  * BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN
     50  * REFERENCES SUCH AS THE  "PORTING UNIX TO THE 386" SERIES
     51  * (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING
     52  * JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND
     53  * LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE
     54  * ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS
     55  * OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992.
     56  */
     57 
     58 #include <sys/cdefs.h>
     59 __KERNEL_RCSID(0, "$NetBSD: lpt.c,v 1.29.2.1 2008/06/17 09:13:55 yamt Exp $");
     60 
     61 #include <sys/param.h>
     62 #include <sys/systm.h>
     63 #include <sys/callout.h>
     64 #include <sys/proc.h>
     65 #include <sys/user.h>
     66 #include <sys/buf.h>
     67 #include <sys/kernel.h>
     68 #include <sys/ioctl.h>
     69 #include <sys/uio.h>
     70 #include <sys/device.h>
     71 #include <sys/conf.h>
     72 #include <sys/syslog.h>
     73 
     74 #include <machine/cpu.h>
     75 #include <machine/iomap.h>
     76 #include <machine/mfp.h>
     77 
     78 #include <atari/dev/ym2149reg.h>
     79 #include <atari/atari/intr.h>
     80 
     81 #define	TIMEOUT		hz*16	/* wait up to 16 seconds for a ready */
     82 #define	STEP		hz/4
     83 
     84 #define	LPTPRI		(PZERO+8)
     85 #define	LPT_BSIZE	1024
     86 
     87 #if !defined(DEBUG) || !defined(notdef)
     88 #define lprintf		if (0) aprint_error_dev
     89 #else
     90 #define lprintf		if (lptdebug) aprint_error_dev
     91 int lptdebug = 1;
     92 #endif
     93 
     94 struct lpt_softc {
     95 	device_t	sc_dev;
     96 	struct callout	sc_wakeup_ch;
     97 	size_t		sc_count;
     98 	struct buf	*sc_inbuf;
     99 	u_char		*sc_cp;
    100 	int		sc_spinmax;
    101 	u_char		sc_state;
    102 #define	LPT_OPEN	0x01	/* device is open */
    103 #define	LPT_OBUSY	0x02	/* printer is busy doing output */
    104 #define	LPT_INIT	0x04	/* waiting to initialize for open */
    105 	u_char		sc_flags;
    106 #define	LPT_AUTOLF	0x20	/* automatic LF on CR XXX: LWP - not yet... */
    107 #define	LPT_NOINTR	0x40	/* do not use interrupt */
    108 };
    109 
    110 #define	LPTUNIT(s)	(minor(s) & 0x1f)
    111 #define	LPTFLAGS(s)	(minor(s) & 0xe0)
    112 #define	NOT_READY()	(MFP->mf_gpip & IO_PBSY)
    113 
    114 /* {b,c}devsw[] function prototypes */
    115 dev_type_open(lpopen);
    116 dev_type_close(lpclose);
    117 dev_type_write(lpwrite);
    118 dev_type_ioctl(lpioctl);
    119 
    120 static void lptwakeup (void *arg);
    121 static int pushbytes (struct lpt_softc *);
    122 static void lptpseudointr (struct lpt_softc *);
    123 int lptintr (struct lpt_softc *);
    124 int lpthwintr (struct lpt_softc *, int);
    125 
    126 
    127 /*
    128  * Autoconfig stuff
    129  */
    130 static void lpattach (device_t, device_t, void *);
    131 static int  lpmatch (device_t, cfdata_t , void *);
    132 
    133 CFATTACH_DECL_NEW(lp, sizeof(struct lpt_softc),
    134     lpmatch, lpattach, NULL, NULL);
    135 
    136 extern struct cfdriver lp_cd;
    137 
    138 const struct cdevsw lp_cdevsw = {
    139 	lpopen, lpclose, noread, lpwrite, lpioctl,
    140 	nostop, notty, nopoll, nommap, nokqfilter,
    141 };
    142 
    143 /*ARGSUSED*/
    144 static	int
    145 lpmatch(device_t pdp, cfdata_t cfp, void *auxp)
    146 {
    147 	static int	lpt_matched = 0;
    148 
    149 	/* Match at most 1 lpt unit */
    150 	if (strcmp((char *)auxp, "lpt") || lpt_matched)
    151 		return 0;
    152 	lpt_matched = 1;
    153 	return (1);
    154 }
    155 
    156 /*ARGSUSED*/
    157 static void
    158 lpattach(device_t pdp, device_t dp, void *auxp)
    159 {
    160 	struct lpt_softc *sc = device_private(dp);
    161 
    162 	sc->sc_dev = dp;
    163 	sc->sc_state = 0;
    164 
    165 	aprint_normal("\n");
    166 
    167 	if (intr_establish(0, USER_VEC, 0, (hw_ifun_t)lpthwintr, sc) == NULL)
    168 		aprint_error_dev(dp, "Can't establish interrupt\n");
    169 	ym2149_strobe(1);
    170 
    171 	callout_init(&sc->sc_wakeup_ch, 0);
    172 }
    173 
    174 /*
    175  * Reset the printer, then wait until it's selected and not busy.
    176  */
    177 int
    178 lpopen(dev_t dev, int flag, int mode, struct lwp *l)
    179 {
    180 	u_char			flags = LPTFLAGS(dev);
    181 	struct lpt_softc	*sc;
    182 	int 			error;
    183 	int			spin;
    184 	int			sps;
    185 
    186 	sc = device_lookup_private(&lp_cd, LPTUNIT(dev));
    187 	if (!sc)
    188 		return ENXIO;
    189 
    190 #ifdef DIAGNOSTIC
    191 	if (sc->sc_state)
    192 		aprint_verbose_dev(sc->sc_dev, "stat=0x%x not zero\n",
    193 		    sc->sc_state);
    194 #endif
    195 
    196 	if (sc->sc_state)
    197 		return EBUSY;
    198 
    199 	sc->sc_state = LPT_INIT;
    200 	sc->sc_flags = flags;
    201 	lprintf(sc->sc_dev, "open: flags=0x%x\n", flags);
    202 
    203 	/* wait till ready (printer running diagnostics) */
    204 	for (spin = 0; NOT_READY(); spin += STEP) {
    205 		if (spin >= TIMEOUT) {
    206 			sc->sc_state = 0;
    207 			return EBUSY;
    208 		}
    209 
    210 		/* wait 1/4 second, give up if we get a signal */
    211 		if ((error = tsleep((void *)sc, LPTPRI | PCATCH, "lptopen",
    212 		     STEP)) != EWOULDBLOCK) {
    213 			sc->sc_state = 0;
    214 			return error;
    215 		}
    216 	}
    217 
    218 	sc->sc_inbuf = geteblk(LPT_BSIZE);
    219 	sc->sc_count = 0;
    220 	sc->sc_state = LPT_OPEN;
    221 
    222 	if ((sc->sc_flags & LPT_NOINTR) == 0) {
    223 		lptwakeup(sc);
    224 
    225 		sps = splhigh();
    226 		MFP->mf_imrb |= IB_PBSY;
    227 		MFP->mf_ierb |= IB_PBSY;
    228 		splx(sps);
    229 	}
    230 
    231 	lprintf(sc->sc_dev, "opened\n");
    232 	return 0;
    233 }
    234 
    235 void
    236 lptwakeup(void *arg)
    237 {
    238 	struct lpt_softc *sc = arg;
    239 
    240 	lptpseudointr(sc);
    241 
    242 	callout_reset(&sc->sc_wakeup_ch, STEP, lptwakeup, sc);
    243 }
    244 
    245 /*
    246  * Close the device, and free the local line buffer.
    247  */
    248 int
    249 lpclose(dev_t dev, int flag, int mode, struct lwp *l)
    250 {
    251 	struct lpt_softc *sc = device_lookup_private(&lp_cd, LPTUNIT(dev));
    252 	int		 sps;
    253 
    254 	if (sc->sc_count)
    255 		(void) pushbytes(sc);
    256 
    257 	if ((sc->sc_flags & LPT_NOINTR) == 0) {
    258 		callout_stop(&sc->sc_wakeup_ch);
    259 
    260 		sps = splhigh();
    261 		MFP->mf_ierb &= ~IB_PBSY;
    262 		MFP->mf_imrb &= ~IB_PBSY;
    263 		splx(sps);
    264 	}
    265 
    266 	sc->sc_state = 0;
    267 	brelse(sc->sc_inbuf, 0);
    268 
    269 	lprintf(sc->sc_dev, "closed\n");
    270 	return 0;
    271 }
    272 
    273 int
    274 pushbytes(struct lpt_softc *sc)
    275 {
    276 	int	error;
    277 
    278 	if (sc->sc_flags & LPT_NOINTR) {
    279 		int spin, tic;
    280 
    281 		while (sc->sc_count > 0) {
    282 			spin = 0;
    283 			while (NOT_READY()) {
    284 				if (++spin < sc->sc_spinmax)
    285 					continue;
    286 				tic = 0;
    287 				/* adapt busy-wait algorithm */
    288 				sc->sc_spinmax++;
    289 				while (NOT_READY()) {
    290 					/* exponential backoff */
    291 					tic = tic + tic + 1;
    292 					if (tic > TIMEOUT)
    293 						tic = TIMEOUT;
    294 					error = tsleep((void *)sc,
    295 					    LPTPRI | PCATCH, "lptpsh", tic);
    296 					if (error != EWOULDBLOCK)
    297 						return error;
    298 				}
    299 				break;
    300 			}
    301 
    302 			ym2149_write_ioport(YM_IOB, *sc->sc_cp++);
    303 			ym2149_strobe(0);
    304 			sc->sc_count--;
    305 			ym2149_strobe(1);
    306 
    307 			/* adapt busy-wait algorithm */
    308 			if (spin*2 + 16 < sc->sc_spinmax)
    309 				sc->sc_spinmax--;
    310 		}
    311 	} else {
    312 		while (sc->sc_count > 0) {
    313 			/* if the printer is ready for a char, give it one */
    314 			if ((sc->sc_state & LPT_OBUSY) == 0) {
    315 				lprintf(sc->sc_dev, "write %d\n",
    316 				    sc->sc_count);
    317 				(void) lptpseudointr(sc);
    318 			}
    319 			if ((error = tsleep((void *)sc, LPTPRI | PCATCH,
    320 			     "lptwrite2", 0)) != 0)
    321 				return error;
    322 		}
    323 	}
    324 	return 0;
    325 }
    326 
    327 /*
    328  * Copy a line from user space to a local buffer, then call putc to get the
    329  * chars moved to the output queue.
    330  */
    331 int
    332 lpwrite(dev_t dev, struct uio *uio, int flags)
    333 {
    334 	struct lpt_softc *sc = device_lookup_private(&lp_cd,LPTUNIT(dev));
    335 	size_t n;
    336 	int error = 0;
    337 
    338 	while ((n = min(LPT_BSIZE, uio->uio_resid)) > 0) {
    339 		uiomove(sc->sc_cp = sc->sc_inbuf->b_data, n, uio);
    340 		sc->sc_count = n;
    341 		error = pushbytes(sc);
    342 		if (error) {
    343 			/*
    344 			 * Return accurate residual if interrupted or timed
    345 			 * out.
    346 			 */
    347 			uio->uio_resid += sc->sc_count;
    348 			sc->sc_count = 0;
    349 			return error;
    350 		}
    351 	}
    352 	return 0;
    353 }
    354 
    355 /*
    356  * Handle printer interrupts which occur when the printer is ready to accept
    357  * another char.
    358  */
    359 int
    360 lptintr(struct lpt_softc *sc)
    361 {
    362 	/* is printer online and ready for output */
    363 	if (NOT_READY())
    364 		return 0;
    365 
    366 	if (sc->sc_count) {
    367 
    368 		/* send char */
    369 		ym2149_write_ioport(YM_IOB, *sc->sc_cp++);
    370 		ym2149_strobe(0);
    371 		sc->sc_count--;
    372 		ym2149_strobe(1);
    373 		sc->sc_state |= LPT_OBUSY;
    374 	} else
    375 		sc->sc_state &= ~LPT_OBUSY;
    376 
    377 	if (sc->sc_count == 0) {
    378 		/* none, wake up the top half to get more */
    379 		wakeup((void *)sc);
    380 	}
    381 
    382 	return 1;
    383 }
    384 
    385 static void
    386 lptpseudointr(struct lpt_softc *sc)
    387 {
    388 	int	s;
    389 
    390 	s = spltty();
    391 	lptintr(sc);
    392 	splx(s);
    393 }
    394 
    395 int
    396 lpthwintr(struct lpt_softc *sc, int sr)
    397 {
    398 	if (!BASEPRI(sr))
    399 		add_sicallback((si_farg)lptpseudointr, sc, 0);
    400 	else lptpseudointr(sc);
    401 	return 1;
    402 }
    403 
    404 int
    405 lpioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l)
    406 {
    407 	int error = 0;
    408 
    409 	switch (cmd) {
    410 	default:
    411 		error = ENODEV;
    412 	}
    413 
    414 	return error;
    415 }
    416