ser.c revision 1.36
1 /* $NetBSD: ser.c,v 1.36 2007/11/19 18:51:39 ad Exp $ */ 2 3 /*- 4 * Copyright (c) 1997 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Leo Weppelman. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the NetBSD 21 * Foundation, Inc. and its contributors. 22 * 4. Neither the name of The NetBSD Foundation nor the names of its 23 * contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 */ 38 /*- 39 * Copyright (c) 1993, 1994, 1995, 1996, 1997 40 * Charles M. Hannum. All rights reserved. 41 * 42 * Interrupt processing and hardware flow control partly based on code from 43 * Onno van der Linden and Gordon Ross. 44 * 45 * Redistribution and use in source and binary forms, with or without 46 * modification, are permitted provided that the following conditions 47 * are met: 48 * 1. Redistributions of source code must retain the above copyright 49 * notice, this list of conditions and the following disclaimer. 50 * 2. Redistributions in binary form must reproduce the above copyright 51 * notice, this list of conditions and the following disclaimer in the 52 * documentation and/or other materials provided with the distribution. 53 * 3. All advertising materials mentioning features or use of this software 54 * must display the following acknowledgement: 55 * This product includes software developed by Charles M. Hannum. 56 * 4. The name of the author may not be used to endorse or promote products 57 * derived from this software without specific prior written permission. 58 * 59 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 60 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 61 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 62 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 63 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 64 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 65 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 66 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 67 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 68 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 69 */ 70 71 /* 72 * Copyright (c) 1991 The Regents of the University of California. 73 * All rights reserved. 74 * 75 * Redistribution and use in source and binary forms, with or without 76 * modification, are permitted provided that the following conditions 77 * are met: 78 * 1. Redistributions of source code must retain the above copyright 79 * notice, this list of conditions and the following disclaimer. 80 * 2. Redistributions in binary form must reproduce the above copyright 81 * notice, this list of conditions and the following disclaimer in the 82 * documentation and/or other materials provided with the distribution. 83 * 3. Neither the name of the University nor the names of its contributors 84 * may be used to endorse or promote products derived from this software 85 * without specific prior written permission. 86 * 87 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 88 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 89 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 90 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 91 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 92 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 93 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 94 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 95 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 96 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 97 * SUCH DAMAGE. 98 * 99 * @(#)com.c 7.5 (Berkeley) 5/16/91 100 */ 101 102 #include <sys/cdefs.h> 103 __KERNEL_RCSID(0, "$NetBSD: ser.c,v 1.36 2007/11/19 18:51:39 ad Exp $"); 104 105 #include "opt_ddb.h" 106 #include "opt_mbtype.h" 107 #include "opt_serconsole.h" 108 109 #include <sys/param.h> 110 #include <sys/systm.h> 111 #include <sys/ioctl.h> 112 #include <sys/select.h> 113 #include <sys/tty.h> 114 #include <sys/proc.h> 115 #include <sys/user.h> 116 #include <sys/conf.h> 117 #include <sys/file.h> 118 #include <sys/uio.h> 119 #include <sys/kernel.h> 120 #include <sys/syslog.h> 121 #include <sys/types.h> 122 #include <sys/device.h> 123 #include <sys/kauth.h> 124 125 #include <m68k/asm_single.h> 126 127 #include <machine/iomap.h> 128 #include <machine/mfp.h> 129 #include <atari/atari/intr.h> 130 #include <atari/dev/serreg.h> 131 132 #if !defined(_MILANHW_) 133 #include <atari/dev/ym2149reg.h> 134 #else 135 /* MILAN has no ym2149 */ 136 #define ym2149_dtr(set) { \ 137 if (set) \ 138 single_inst_bset_b(MFP->mf_gpip, 0x08); \ 139 else single_inst_bclr_b(MFP->mf_gpip, 0x08); \ 140 } 141 142 #define ym2149_rts(set) { \ 143 if (set) \ 144 single_inst_bset_b(MFP->mf_gpip, 0x01); \ 145 else single_inst_bclr_b(MFP->mf_gpip, 0x01); \ 146 } 147 #endif /* _MILANHW_ */ 148 149 /* #define SER_DEBUG */ 150 151 #define SERUNIT(x) (minor(x) & 0x7ffff) 152 #define SERDIALOUT(x) (minor(x) & 0x80000) 153 154 /* XXX */ 155 #define CONSBAUD 9600 156 #define CONSCFLAG TTYDEF_CFLAG 157 /* end XXX */ 158 159 #define splserial() spl6() 160 161 /* Buffer size for character buffer */ 162 #define RXBUFSIZE 2048 /* More than enough.. */ 163 #define RXBUFMASK (RXBUFSIZE-1) /* Only iff previous is a power of 2 */ 164 #define RXHIWAT (RXBUFSIZE >> 2) 165 166 struct ser_softc { 167 struct device sc_dev; 168 struct tty *sc_tty; 169 170 struct callout sc_diag_ch; 171 172 int sc_overflows; 173 int sc_floods; 174 int sc_errors; 175 176 u_char sc_hwflags; 177 u_char sc_swflags; 178 179 int sc_ospeed; /* delay + timer-d data */ 180 u_char sc_imra; 181 u_char sc_imrb; 182 u_char sc_ucr; /* Uart control */ 183 u_char sc_msr; /* Modem status */ 184 u_char sc_tsr; /* Tranceiver status */ 185 u_char sc_rsr; /* Receiver status */ 186 u_char sc_mcr; /* (Pseudo) Modem ctrl. */ 187 188 u_char sc_msr_delta; 189 u_char sc_msr_mask; 190 u_char sc_mcr_active; 191 u_char sc_mcr_dtr, sc_mcr_rts, sc_msr_cts, sc_msr_dcd; 192 193 int sc_r_hiwat; 194 volatile u_int sc_rbget; 195 volatile u_int sc_rbput; 196 volatile u_int sc_rbavail; 197 u_char sc_rbuf[RXBUFSIZE]; 198 u_char sc_lbuf[RXBUFSIZE]; 199 200 volatile u_char sc_rx_blocked; 201 volatile u_char sc_rx_ready; 202 volatile u_char sc_tx_busy; 203 volatile u_char sc_tx_done; 204 volatile u_char sc_tx_stopped; 205 volatile u_char sc_st_check; 206 207 u_char *sc_tba; 208 int sc_tbc; 209 int sc_heldtbc; 210 211 volatile u_char sc_heldchange; 212 }; 213 214 /* 215 * For sc_hwflags: 216 */ 217 #define SER_HW_CONSOLE 0x01 218 219 void ser_break __P((struct ser_softc *, int)); 220 void ser_hwiflow __P((struct ser_softc *, int)); 221 void ser_iflush __P((struct ser_softc *)); 222 void ser_loadchannelregs __P((struct ser_softc *)); 223 void ser_modem __P((struct ser_softc *, int)); 224 void serdiag __P((void *)); 225 int serhwiflow __P((struct tty *, int)); 226 void serinit __P((int)); 227 void serinitcons __P((int)); 228 int sermintr __P((void *)); 229 int sertrintr __P((void *)); 230 int serparam __P((struct tty *, struct termios *)); 231 void serstart __P((struct tty *)); 232 233 struct consdev; 234 void sercnprobe __P((struct consdev *)); 235 void sercninit __P((struct consdev *)); 236 int sercngetc __P((dev_t)); 237 void sercnputc __P((dev_t, int)); 238 void sercnpollc __P((dev_t, int)); 239 240 static void sermsrint __P((struct ser_softc *, struct tty*)); 241 static void serrxint __P((struct ser_softc *, struct tty*)); 242 static void ser_shutdown __P((struct ser_softc *)); 243 static int serspeed __P((long)); 244 static void sersoft __P((void *)); 245 static void sertxint __P((struct ser_softc *, struct tty*)); 246 247 static volatile int ser_softintr_scheduled = 0; 248 249 /* 250 * Autoconfig stuff 251 */ 252 static void serattach __P((struct device *, struct device *, void *)); 253 static int sermatch __P((struct device *, struct cfdata *, void *)); 254 255 CFATTACH_DECL(ser, sizeof(struct ser_softc), 256 sermatch, serattach, NULL, NULL); 257 258 extern struct cfdriver ser_cd; 259 260 dev_type_open(seropen); 261 dev_type_close(serclose); 262 dev_type_read(serread); 263 dev_type_write(serwrite); 264 dev_type_ioctl(serioctl); 265 dev_type_stop(serstop); 266 dev_type_tty(sertty); 267 dev_type_poll(serpoll); 268 269 const struct cdevsw ser_cdevsw = { 270 seropen, serclose, serread, serwrite, serioctl, 271 serstop, sertty, serpoll, nommap, ttykqfilter, D_TTY 272 }; 273 274 /*ARGSUSED*/ 275 static int 276 sermatch(pdp, cfp, auxp) 277 struct device *pdp; 278 struct cfdata *cfp; 279 void *auxp; 280 { 281 static int ser_matched = 0; 282 283 /* Match at most one ser unit */ 284 if (strcmp((char *)auxp, "ser") || ser_matched) 285 return 0; 286 287 ser_matched = 1; 288 return 1; 289 } 290 291 /*ARGSUSED*/ 292 static void 293 serattach(pdp, dp, auxp) 294 struct device *pdp, *dp; 295 void *auxp; 296 { 297 struct ser_softc *sc = (void *)dp; 298 299 if (intr_establish(1, USER_VEC, 0, (hw_ifun_t)sermintr, sc) == NULL) 300 printf("serattach: Can't establish interrupt (1)\n"); 301 if (intr_establish(2, USER_VEC, 0, (hw_ifun_t)sermintr, sc) == NULL) 302 printf("serattach: Can't establish interrupt (2)\n"); 303 if (intr_establish(14, USER_VEC, 0, (hw_ifun_t)sermintr, sc) == NULL) 304 printf("serattach: Can't establish interrupt (14)\n"); 305 if (intr_establish(9, USER_VEC, 0, (hw_ifun_t)sertrintr, sc) == NULL) 306 printf("serattach: Can't establish interrupt (9)\n"); 307 if (intr_establish(10, USER_VEC, 0, (hw_ifun_t)sertrintr, sc) == NULL) 308 printf("serattach: Can't establish interrupt (10)\n"); 309 if (intr_establish(11, USER_VEC, 0, (hw_ifun_t)sertrintr, sc) == NULL) 310 printf("serattach: Can't establish interrupt (11)\n"); 311 if (intr_establish(12, USER_VEC, 0, (hw_ifun_t)sertrintr, sc) == NULL) 312 printf("serattach: Can't establish interrupt (12)\n"); 313 314 ym2149_rts(1); 315 ym2149_dtr(1); 316 317 /* 318 * Enable but mask interrupts... 319 * XXX: Look at edge-sensitivity for DCD/CTS interrupts. 320 */ 321 MFP->mf_ierb |= IB_SCTS|IB_SDCD; 322 MFP->mf_iera |= IA_RRDY|IA_RERR|IA_TRDY|IA_TERR; 323 MFP->mf_imrb &= ~(IB_SCTS|IB_SDCD); 324 MFP->mf_imra &= ~(IA_RRDY|IA_RERR|IA_TRDY|IA_TERR); 325 326 callout_init(&sc->sc_diag_ch, 0); 327 328 #if SERCONSOLE > 0 329 /* 330 * Activate serial console when DCD present... 331 */ 332 if (!(MFP->mf_gpip & MCR_DCD)) 333 SET(sc->sc_hwflags, SER_HW_CONSOLE); 334 #endif /* SERCONSOLE > 0 */ 335 336 printf("\n"); 337 if (ISSET(sc->sc_hwflags, SER_HW_CONSOLE)) { 338 serinit(CONSBAUD); 339 printf("%s: console\n", sc->sc_dev.dv_xname); 340 } 341 } 342 343 #ifdef SER_DEBUG 344 void serstatus __P((struct ser_softc *, char *)); 345 void 346 serstatus(sc, str) 347 struct ser_softc *sc; 348 char *str; 349 { 350 struct tty *tp = sc->sc_tty; 351 352 printf("%s: %s %sclocal %sdcd %sts_carr_on %sdtr %stx_stopped\n", 353 sc->sc_dev.dv_xname, str, 354 ISSET(tp->t_cflag, CLOCAL) ? "+" : "-", 355 ISSET(sc->sc_msr, MCR_DCD) ? "+" : "-", 356 ISSET(tp->t_state, TS_CARR_ON) ? "+" : "-", 357 ISSET(sc->sc_mcr, MCR_DTR) ? "+" : "-", 358 sc->sc_tx_stopped ? "+" : "-"); 359 360 printf("%s: %s %scrtscts %scts %sts_ttstop %srts %srx_blocked\n", 361 sc->sc_dev.dv_xname, str, 362 ISSET(tp->t_cflag, CRTSCTS) ? "+" : "-", 363 ISSET(sc->sc_msr, MCR_CTS) ? "+" : "-", 364 ISSET(tp->t_state, TS_TTSTOP) ? "+" : "-", 365 ISSET(sc->sc_mcr, MCR_RTS) ? "+" : "-", 366 sc->sc_rx_blocked ? "+" : "-"); 367 } 368 #endif /* SER_DEBUG */ 369 370 int 371 seropen(dev, flag, mode, l) 372 dev_t dev; 373 int flag, mode; 374 struct lwp *l; 375 { 376 int unit = SERUNIT(dev); 377 struct ser_softc *sc; 378 struct tty *tp; 379 int s, s2; 380 int error = 0; 381 382 if (unit >= ser_cd.cd_ndevs) 383 return (ENXIO); 384 sc = ser_cd.cd_devs[unit]; 385 if (!sc) 386 return (ENXIO); 387 388 if (!sc->sc_tty) { 389 tp = sc->sc_tty = ttymalloc(); 390 tty_attach(tp); 391 } else 392 tp = sc->sc_tty; 393 394 if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp)) 395 return (EBUSY); 396 397 s = spltty(); 398 399 /* 400 * Do the following if this is a first open. 401 */ 402 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 403 struct termios t; 404 405 /* Turn on interrupts. */ 406 sc->sc_imra = IA_RRDY|IA_RERR|IA_TRDY|IA_TERR; 407 sc->sc_imrb = IB_SCTS|IB_SDCD; 408 single_inst_bset_b(MFP->mf_imra, sc->sc_imra); 409 single_inst_bset_b(MFP->mf_imrb, sc->sc_imrb); 410 411 /* Fetch the current modem control status, needed later. */ 412 sc->sc_msr = ~MFP->mf_gpip & (IO_SDCD|IO_SCTS|IO_SRI); 413 414 /* Add some entry points needed by the tty layer. */ 415 tp->t_oproc = serstart; 416 tp->t_param = serparam; 417 tp->t_hwiflow = serhwiflow; 418 tp->t_dev = dev; 419 420 /* 421 * Initialize the termios status to the defaults. Add in the 422 * sticky bits from TIOCSFLAGS. 423 */ 424 t.c_ispeed = 0; 425 if (ISSET(sc->sc_hwflags, SER_HW_CONSOLE)) { 426 t.c_ospeed = CONSBAUD; 427 t.c_cflag = CONSCFLAG; 428 } 429 else { 430 t.c_ospeed = TTYDEF_SPEED; 431 t.c_cflag = TTYDEF_CFLAG; 432 } 433 if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL)) 434 SET(t.c_cflag, CLOCAL); 435 if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS)) 436 SET(t.c_cflag, CRTSCTS); 437 if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF)) 438 SET(t.c_cflag, MDMBUF); 439 tp->t_iflag = TTYDEF_IFLAG; 440 tp->t_oflag = TTYDEF_OFLAG; 441 tp->t_lflag = TTYDEF_LFLAG; 442 ttychars(tp); 443 (void) serparam(tp, &t); 444 ttsetwater(tp); 445 446 s2 = splserial(); 447 448 /* 449 * Turn on DTR. We must always do this, even if carrier is not 450 * present, because otherwise we'd have to use TIOCSDTR 451 * immediately after setting CLOCAL. We will drop DTR only on 452 * the next high-low transition of DCD, or by explicit request. 453 */ 454 ser_modem(sc, 1); 455 456 /* Clear the input ring, and unblock. */ 457 sc->sc_rbput = sc->sc_rbget = 0; 458 sc->sc_rbavail = RXBUFSIZE; 459 ser_iflush(sc); 460 sc->sc_rx_blocked = 0; 461 ser_hwiflow(sc, 0); 462 463 #ifdef SER_DEBUG 464 serstatus(sc, "seropen "); 465 #endif 466 467 splx(s2); 468 } 469 470 splx(s); 471 472 error = ttyopen(tp, SERDIALOUT(dev), ISSET(flag, O_NONBLOCK)); 473 if (error) 474 goto bad; 475 476 error = (*tp->t_linesw->l_open)(dev, tp); 477 if (error) 478 goto bad; 479 480 return (0); 481 482 bad: 483 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 484 /* 485 * We failed to open the device, and nobody else had it opened. 486 * Clean up the state as appropriate. 487 */ 488 ser_shutdown(sc); 489 } 490 491 return (error); 492 } 493 494 int 495 serclose(dev, flag, mode, l) 496 dev_t dev; 497 int flag, mode; 498 struct lwp *l; 499 { 500 int unit = SERUNIT(dev); 501 struct ser_softc *sc = ser_cd.cd_devs[unit]; 502 struct tty *tp = sc->sc_tty; 503 504 /* XXX This is for cons.c. */ 505 if (!ISSET(tp->t_state, TS_ISOPEN)) 506 return (0); 507 508 (*tp->t_linesw->l_close)(tp, flag); 509 ttyclose(tp); 510 511 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 512 /* 513 * Although we got a last close, the device may still be in 514 * use; e.g. if this was the dialout node, and there are still 515 * processes waiting for carrier on the non-dialout node. 516 */ 517 ser_shutdown(sc); 518 } 519 520 return (0); 521 } 522 523 int 524 serread(dev, uio, flag) 525 dev_t dev; 526 struct uio *uio; 527 int flag; 528 { 529 struct ser_softc *sc = ser_cd.cd_devs[SERUNIT(dev)]; 530 struct tty *tp = sc->sc_tty; 531 532 return ((*tp->t_linesw->l_read)(tp, uio, flag)); 533 } 534 535 int 536 serwrite(dev, uio, flag) 537 dev_t dev; 538 struct uio *uio; 539 int flag; 540 { 541 struct ser_softc *sc = ser_cd.cd_devs[SERUNIT(dev)]; 542 struct tty *tp = sc->sc_tty; 543 544 return ((*tp->t_linesw->l_write)(tp, uio, flag)); 545 } 546 547 int 548 serpoll(dev, events, l) 549 dev_t dev; 550 int events; 551 struct lwp *l; 552 { 553 struct ser_softc *sc = ser_cd.cd_devs[SERUNIT(dev)]; 554 struct tty *tp = sc->sc_tty; 555 556 return ((*tp->t_linesw->l_poll)(tp, events, l)); 557 } 558 559 struct tty * 560 sertty(dev) 561 dev_t dev; 562 { 563 struct ser_softc *sc = ser_cd.cd_devs[SERUNIT(dev)]; 564 struct tty *tp = sc->sc_tty; 565 566 return (tp); 567 } 568 569 int 570 serioctl(dev, cmd, data, flag, l) 571 dev_t dev; 572 u_long cmd; 573 void *data; 574 int flag; 575 struct lwp *l; 576 { 577 int unit = SERUNIT(dev); 578 struct ser_softc *sc = ser_cd.cd_devs[unit]; 579 struct tty *tp = sc->sc_tty; 580 int error; 581 582 error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l); 583 if (error != EPASSTHROUGH) 584 return (error); 585 586 error = ttioctl(tp, cmd, data, flag, l); 587 if (error != EPASSTHROUGH) 588 return (error); 589 590 switch (cmd) { 591 case TIOCSBRK: 592 ser_break(sc, 1); 593 break; 594 595 case TIOCCBRK: 596 ser_break(sc, 0); 597 break; 598 599 case TIOCSDTR: 600 ser_modem(sc, 1); 601 break; 602 603 case TIOCCDTR: 604 ser_modem(sc, 0); 605 break; 606 607 case TIOCGFLAGS: 608 *(int *)data = sc->sc_swflags; 609 break; 610 611 case TIOCSFLAGS: 612 error = kauth_authorize_device_tty(l->l_cred, 613 KAUTH_DEVICE_TTY_PRIVSET, tp); 614 if (error) 615 return (error); 616 sc->sc_swflags = *(int *)data; 617 break; 618 619 case TIOCMSET: 620 case TIOCMBIS: 621 case TIOCMBIC: 622 case TIOCMGET: 623 default: 624 return (EPASSTHROUGH); 625 } 626 627 #ifdef SER_DEBUG 628 serstatus(sc, "serioctl "); 629 #endif 630 631 return (0); 632 } 633 634 void 635 ser_break(sc, onoff) 636 struct ser_softc *sc; 637 int onoff; 638 { 639 int s; 640 641 s = splserial(); 642 if (onoff) 643 SET(sc->sc_tsr, TSR_SBREAK); 644 else 645 CLR(sc->sc_tsr, TSR_SBREAK); 646 647 if (!sc->sc_heldchange) { 648 if (sc->sc_tx_busy) { 649 sc->sc_heldtbc = sc->sc_tbc; 650 sc->sc_tbc = 0; 651 sc->sc_heldchange = 1; 652 } else 653 ser_loadchannelregs(sc); 654 } 655 splx(s); 656 } 657 658 void 659 ser_modem(sc, onoff) 660 struct ser_softc *sc; 661 int onoff; 662 { 663 int s; 664 665 s = splserial(); 666 if (onoff) 667 SET(sc->sc_mcr, sc->sc_mcr_dtr); 668 else 669 CLR(sc->sc_mcr, sc->sc_mcr_dtr); 670 671 if (!sc->sc_heldchange) { 672 if (sc->sc_tx_busy) { 673 sc->sc_heldtbc = sc->sc_tbc; 674 sc->sc_tbc = 0; 675 sc->sc_heldchange = 1; 676 } else 677 ser_loadchannelregs(sc); 678 } 679 splx(s); 680 } 681 682 int 683 serparam(tp, t) 684 struct tty *tp; 685 struct termios *t; 686 { 687 struct ser_softc *sc = ser_cd.cd_devs[SERUNIT(tp->t_dev)]; 688 int ospeed = serspeed(t->c_ospeed); 689 u_char ucr; 690 int s; 691 692 /* check requested parameters */ 693 if (ospeed < 0) 694 return (EINVAL); 695 if (t->c_ispeed && t->c_ispeed != t->c_ospeed) 696 return (EINVAL); 697 698 sc->sc_rsr = RSR_ENAB; 699 sc->sc_tsr = TSR_ENAB; 700 701 ucr = UCR_CLKDIV; 702 703 switch (ISSET(t->c_cflag, CSIZE)) { 704 case CS5: 705 SET(ucr, UCR_5BITS); 706 break; 707 case CS6: 708 SET(ucr, UCR_6BITS); 709 break; 710 case CS7: 711 SET(ucr, UCR_7BITS); 712 break; 713 case CS8: 714 SET(ucr, UCR_8BITS); 715 break; 716 } 717 if (ISSET(t->c_cflag, PARENB)) { 718 SET(ucr, UCR_PENAB); 719 if (!ISSET(t->c_cflag, PARODD)) 720 SET(ucr, UCR_PEVEN); 721 } 722 if (ISSET(t->c_cflag, CSTOPB)) 723 SET(ucr, UCR_STOPB2); 724 else 725 SET(ucr, UCR_STOPB1); 726 727 s = splserial(); 728 729 sc->sc_ucr = ucr; 730 731 /* 732 * For the console, always force CLOCAL and !HUPCL, so that the port 733 * is always active. 734 */ 735 if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR) || 736 ISSET(sc->sc_hwflags, SER_HW_CONSOLE)) { 737 SET(t->c_cflag, CLOCAL); 738 CLR(t->c_cflag, HUPCL); 739 } 740 741 /* 742 * If we're not in a mode that assumes a connection is present, then 743 * ignore carrier changes. 744 */ 745 if (ISSET(t->c_cflag, CLOCAL | MDMBUF)) 746 sc->sc_msr_dcd = 0; 747 else 748 sc->sc_msr_dcd = MCR_DCD; 749 /* 750 * Set the flow control pins depending on the current flow control 751 * mode. 752 */ 753 if (ISSET(t->c_cflag, CRTSCTS)) { 754 sc->sc_mcr_dtr = MCR_DTR; 755 sc->sc_mcr_rts = MCR_RTS; 756 sc->sc_msr_cts = MCR_CTS; 757 sc->sc_r_hiwat = RXHIWAT; 758 } else if (ISSET(t->c_cflag, MDMBUF)) { 759 /* 760 * For DTR/DCD flow control, make sure we don't toggle DTR for 761 * carrier detection. 762 */ 763 sc->sc_mcr_dtr = 0; 764 sc->sc_mcr_rts = MCR_DTR; 765 sc->sc_msr_cts = MCR_DCD; 766 sc->sc_r_hiwat = RXHIWAT; 767 } else { 768 /* 769 * If no flow control, then always set RTS. This will make 770 * the other side happy if it mistakenly thinks we're doing 771 * RTS/CTS flow control. 772 */ 773 sc->sc_mcr_dtr = MCR_DTR | MCR_RTS; 774 sc->sc_mcr_rts = 0; 775 sc->sc_msr_cts = 0; 776 sc->sc_r_hiwat = 0; 777 if (ISSET(sc->sc_mcr, MCR_DTR)) 778 SET(sc->sc_mcr, MCR_RTS); 779 else 780 CLR(sc->sc_mcr, MCR_RTS); 781 } 782 sc->sc_msr_mask = sc->sc_msr_cts | sc->sc_msr_dcd; 783 784 #if 0 785 if (ospeed == 0) 786 CLR(sc->sc_mcr, sc->sc_mcr_dtr); 787 else 788 SET(sc->sc_mcr, sc->sc_mcr_dtr); 789 #endif 790 791 sc->sc_ospeed = ospeed; 792 793 /* and copy to tty */ 794 tp->t_ispeed = 0; 795 tp->t_ospeed = t->c_ospeed; 796 tp->t_cflag = t->c_cflag; 797 798 if (!sc->sc_heldchange) { 799 if (sc->sc_tx_busy) { 800 sc->sc_heldtbc = sc->sc_tbc; 801 sc->sc_tbc = 0; 802 sc->sc_heldchange = 1; 803 } else 804 ser_loadchannelregs(sc); 805 } 806 807 splx(s); 808 809 /* 810 * Update the tty layer's idea of the carrier bit, in case we changed 811 * CLOCAL or MDMBUF. We don't hang up here; we only do that if we 812 * lose carrier while carrier detection is on. 813 */ 814 (void) (*tp->t_linesw->l_modem)(tp, ISSET(sc->sc_msr, MCR_DCD)); 815 816 #ifdef SER_DEBUG 817 serstatus(sc, "serparam "); 818 #endif 819 820 /* XXXXX FIX ME */ 821 /* Block or unblock as needed. */ 822 if (!ISSET(t->c_cflag, CHWFLOW)) { 823 if (sc->sc_rx_blocked) { 824 sc->sc_rx_blocked = 0; 825 ser_hwiflow(sc, 0); 826 } 827 if (sc->sc_tx_stopped) { 828 sc->sc_tx_stopped = 0; 829 serstart(tp); 830 } 831 } else { 832 #if 0 833 sermsrint(sc, tp); 834 #endif 835 } 836 837 return (0); 838 } 839 840 void 841 ser_iflush(sc) 842 struct ser_softc *sc; 843 { 844 u_char tmp; 845 846 /* flush any pending I/O */ 847 while (ISSET(MFP->mf_rsr, RSR_CIP|RSR_BFULL)) 848 tmp = MFP->mf_udr; 849 } 850 851 void 852 ser_loadchannelregs(sc) 853 struct ser_softc *sc; 854 { 855 /* XXXXX necessary? */ 856 ser_iflush(sc); 857 858 /* 859 * No interrupts please... 860 */ 861 if((MFP->mf_imra & (IA_RRDY|IA_RERR|IA_TRDY|IA_TERR)) != sc->sc_imra) { 862 printf("loadchannelregs: mf_imra: %x sc_imra: %x\n", (u_int)MFP->mf_imra, 863 (u_int)sc->sc_imra); 864 } 865 if((MFP->mf_imrb & (IB_SCTS|IB_SDCD)) != sc->sc_imrb) { 866 printf("loadchannelregs: mf_imrb: %x sc_imrb: %x\n", (u_int)MFP->mf_imrb, 867 (u_int)sc->sc_imrb); 868 } 869 single_inst_bclr_b(MFP->mf_imra, IA_RRDY|IA_RERR|IA_TRDY|IA_TERR); 870 single_inst_bclr_b(MFP->mf_imrb, IB_SCTS|IB_SDCD); 871 872 MFP->mf_ucr = sc->sc_ucr; 873 MFP->mf_rsr = sc->sc_rsr; 874 MFP->mf_tsr = sc->sc_tsr; 875 876 single_inst_bclr_b(MFP->mf_tcdcr, 0x07); 877 MFP->mf_tddr = sc->sc_ospeed; 878 single_inst_bset_b(MFP->mf_tcdcr, (sc->sc_ospeed >> 8) & 0x0f); 879 880 sc->sc_mcr_active = sc->sc_mcr; 881 882 if (machineid & ATARI_HADES) { 883 /* PCB fault, wires exchanged..... */ 884 ym2149_rts(!(sc->sc_mcr_active & MCR_DTR)); 885 ym2149_dtr(!(sc->sc_mcr_active & MCR_RTS)); 886 } 887 else { 888 ym2149_rts(!(sc->sc_mcr_active & MCR_RTS)); 889 ym2149_dtr(!(sc->sc_mcr_active & MCR_DTR)); 890 } 891 892 single_inst_bset_b(MFP->mf_imra, sc->sc_imra); 893 single_inst_bset_b(MFP->mf_imrb, sc->sc_imrb); 894 } 895 896 int 897 serhwiflow(tp, block) 898 struct tty *tp; 899 int block; 900 { 901 struct ser_softc *sc = ser_cd.cd_devs[SERUNIT(tp->t_dev)]; 902 int s; 903 904 if (sc->sc_mcr_rts == 0) 905 return (0); 906 907 s = splserial(); 908 if (block) { 909 /* 910 * The tty layer is asking us to block input. 911 * If we already did it, just return TRUE. 912 */ 913 if (sc->sc_rx_blocked) 914 goto out; 915 sc->sc_rx_blocked = 1; 916 } else { 917 /* 918 * The tty layer is asking us to resume input. 919 * The input ring is always empty by now. 920 */ 921 sc->sc_rx_blocked = 0; 922 } 923 ser_hwiflow(sc, block); 924 out: 925 splx(s); 926 return (1); 927 } 928 929 /* 930 * (un)block input via hw flowcontrol 931 */ 932 void 933 ser_hwiflow(sc, block) 934 struct ser_softc *sc; 935 int block; 936 { 937 if (sc->sc_mcr_rts == 0) 938 return; 939 940 if (block) { 941 CLR(sc->sc_mcr, sc->sc_mcr_rts); 942 CLR(sc->sc_mcr_active, sc->sc_mcr_rts); 943 } else { 944 SET(sc->sc_mcr, sc->sc_mcr_rts); 945 SET(sc->sc_mcr_active, sc->sc_mcr_rts); 946 } 947 if (machineid & ATARI_HADES) { 948 /* PCB fault, wires exchanged..... */ 949 ym2149_dtr(sc->sc_mcr_active & MCR_RTS); 950 } 951 else { 952 ym2149_rts(sc->sc_mcr_active & MCR_RTS); 953 } 954 } 955 956 void 957 serstart(tp) 958 struct tty *tp; 959 { 960 struct ser_softc *sc = ser_cd.cd_devs[SERUNIT(tp->t_dev)]; 961 int s; 962 963 s = spltty(); 964 if (ISSET(tp->t_state, TS_BUSY)) 965 goto out; 966 if (ISSET(tp->t_state, TS_TIMEOUT | TS_TTSTOP)) 967 goto stopped; 968 969 if (sc->sc_tx_stopped) 970 goto stopped; 971 if (!ttypull(tp)) 972 goto stopped; 973 974 /* Grab the first contiguous region of buffer space. */ 975 { 976 u_char *tba; 977 int tbc; 978 979 tba = tp->t_outq.c_cf; 980 tbc = ndqb(&tp->t_outq, 0); 981 982 (void)splserial(); 983 984 sc->sc_tba = tba; 985 sc->sc_tbc = tbc; 986 } 987 988 SET(tp->t_state, TS_BUSY); 989 sc->sc_tx_busy = 1; 990 991 /* Enable transmit completion interrupts if necessary. */ 992 if (!ISSET(sc->sc_imra, IA_TRDY)) { 993 SET(sc->sc_imra, IA_TRDY|IA_TERR); 994 single_inst_bset_b(MFP->mf_imra, IA_TRDY|IA_TERR); 995 } 996 997 /* Output the first char */ 998 MFP->mf_udr = *sc->sc_tba; 999 sc->sc_tbc--; 1000 sc->sc_tba++; 1001 1002 splx(s); 1003 return; 1004 1005 stopped: 1006 /* Disable transmit completion interrupts if necessary. */ 1007 if (ISSET(sc->sc_imra, IA_TRDY)) { 1008 CLR(sc->sc_imra, IA_TRDY|IA_TERR); 1009 single_inst_bclr_b(MFP->mf_imra, IA_TRDY|IA_TERR); 1010 } 1011 out: 1012 splx(s); 1013 return; 1014 } 1015 1016 /* 1017 * Stop output on a line. 1018 */ 1019 void 1020 serstop(tp, flag) 1021 struct tty *tp; 1022 int flag; 1023 { 1024 struct ser_softc *sc = ser_cd.cd_devs[SERUNIT(tp->t_dev)]; 1025 int s; 1026 1027 s = splserial(); 1028 if (ISSET(tp->t_state, TS_BUSY)) { 1029 /* Stop transmitting at the next chunk. */ 1030 sc->sc_tbc = 0; 1031 sc->sc_heldtbc = 0; 1032 if (!ISSET(tp->t_state, TS_TTSTOP)) 1033 SET(tp->t_state, TS_FLUSH); 1034 } 1035 splx(s); 1036 } 1037 1038 void 1039 serdiag(arg) 1040 void *arg; 1041 { 1042 struct ser_softc *sc = arg; 1043 int overflows, floods; 1044 int s; 1045 1046 s = splserial(); 1047 overflows = sc->sc_overflows; 1048 sc->sc_overflows = 0; 1049 floods = sc->sc_floods; 1050 sc->sc_floods = 0; 1051 sc->sc_errors = 0; 1052 splx(s); 1053 1054 log(LOG_WARNING, 1055 "%s: %d silo overflow%s, %d ibuf flood%s\n", 1056 sc->sc_dev.dv_xname, 1057 overflows, overflows == 1 ? "" : "s", 1058 floods, floods == 1 ? "" : "s"); 1059 } 1060 1061 static 1062 void ser_shutdown(sc) 1063 struct ser_softc *sc; 1064 { 1065 int s; 1066 struct tty *tp = sc->sc_tty; 1067 1068 1069 s = splserial(); 1070 1071 /* If we were asserting flow control, then deassert it. */ 1072 sc->sc_rx_blocked = 1; 1073 ser_hwiflow(sc, 1); 1074 1075 /* Clear any break condition set with TIOCSBRK. */ 1076 ser_break(sc, 0); 1077 1078 /* 1079 * Hang up if necessary. Wait a bit, so the other side has time to 1080 * notice even if we immediately open the port again. 1081 */ 1082 if (ISSET(tp->t_cflag, HUPCL)) { 1083 ser_modem(sc, 0); 1084 (void) tsleep(sc, TTIPRI, ttclos, hz); 1085 } 1086 1087 /* Turn off interrupts. */ 1088 CLR(sc->sc_imra, IA_RRDY|IA_RERR|IA_TRDY|IA_TERR); 1089 CLR(sc->sc_imrb, IB_SCTS|IB_SDCD); 1090 single_inst_bclr_b(MFP->mf_imrb, IB_SCTS|IB_SDCD); 1091 single_inst_bclr_b(MFP->mf_imra, IA_RRDY|IA_RERR|IA_TRDY|IA_TERR); 1092 splx(s); 1093 } 1094 1095 static void 1096 serrxint(sc, tp) 1097 struct ser_softc *sc; 1098 struct tty *tp; 1099 { 1100 u_int get, cc, scc; 1101 int code; 1102 u_char rsr; 1103 int s; 1104 static int lsrmap[8] = { 1105 0, TTY_PE, 1106 TTY_FE, TTY_PE|TTY_FE, 1107 TTY_FE, TTY_PE|TTY_FE, 1108 TTY_FE, TTY_PE|TTY_FE 1109 }; 1110 1111 get = sc->sc_rbget; 1112 scc = cc = RXBUFSIZE - sc->sc_rbavail; 1113 1114 if (cc == RXBUFSIZE) { 1115 sc->sc_floods++; 1116 if (sc->sc_errors++ == 0) 1117 callout_reset(&sc->sc_diag_ch, 60 * hz, serdiag, sc); 1118 } 1119 1120 while (cc--) { 1121 rsr = sc->sc_lbuf[get]; 1122 if (ISSET(rsr, RSR_BREAK)) { 1123 #ifdef DDB 1124 if (ISSET(sc->sc_hwflags, SER_HW_CONSOLE)) 1125 Debugger(); 1126 #endif 1127 } 1128 else if (ISSET(rsr, RSR_OERR)) { 1129 sc->sc_overflows++; 1130 if (sc->sc_errors++ == 0) 1131 callout_reset(&sc->sc_diag_ch, 60 * hz, 1132 serdiag, sc); 1133 } 1134 code = sc->sc_rbuf[get] | 1135 lsrmap[(rsr & (RSR_BREAK|RSR_FERR|RSR_PERR)) >> 3]; 1136 (*tp->t_linesw->l_rint)(code, tp); 1137 get = (get + 1) & RXBUFMASK; 1138 } 1139 1140 sc->sc_rbget = get; 1141 s = splserial(); 1142 sc->sc_rbavail += scc; 1143 /* 1144 * Buffers should be ok again, release possible block, but only if the 1145 * tty layer isn't blocking too. 1146 */ 1147 if (sc->sc_rx_blocked && !ISSET(tp->t_state, TS_TBLOCK)) { 1148 sc->sc_rx_blocked = 0; 1149 ser_hwiflow(sc, 0); 1150 } 1151 splx(s); 1152 } 1153 1154 static void 1155 sertxint(sc, tp) 1156 struct ser_softc *sc; 1157 struct tty *tp; 1158 { 1159 1160 CLR(tp->t_state, TS_BUSY); 1161 if (ISSET(tp->t_state, TS_FLUSH)) 1162 CLR(tp->t_state, TS_FLUSH); 1163 else 1164 ndflush(&tp->t_outq, (int)(sc->sc_tba - tp->t_outq.c_cf)); 1165 (*tp->t_linesw->l_start)(tp); 1166 } 1167 1168 static void 1169 sermsrint(sc, tp) 1170 struct ser_softc *sc; 1171 struct tty *tp; 1172 { 1173 u_char msr, delta; 1174 int s; 1175 1176 s = splserial(); 1177 msr = sc->sc_msr; 1178 delta = sc->sc_msr_delta; 1179 sc->sc_msr_delta = 0; 1180 splx(s); 1181 1182 if (ISSET(delta, sc->sc_msr_dcd)) { 1183 /* 1184 * Inform the tty layer that carrier detect changed. 1185 */ 1186 (void) (*tp->t_linesw->l_modem)(tp, ISSET(msr, MCR_DCD)); 1187 } 1188 1189 if (ISSET(delta, sc->sc_msr_cts)) { 1190 /* Block or unblock output according to flow control. */ 1191 if (ISSET(msr, sc->sc_msr_cts)) { 1192 sc->sc_tx_stopped = 0; 1193 (*tp->t_linesw->l_start)(tp); 1194 } else { 1195 sc->sc_tx_stopped = 1; 1196 serstop(tp, 0); 1197 } 1198 } 1199 1200 #ifdef SER_DEBUG 1201 serstatus(sc, "sermsrint"); 1202 #endif 1203 } 1204 1205 void 1206 sersoft(arg) 1207 void *arg; 1208 { 1209 struct ser_softc *sc = arg; 1210 struct tty *tp; 1211 1212 ser_softintr_scheduled = 0; 1213 1214 tp = sc->sc_tty; 1215 if (tp == NULL) 1216 return; 1217 1218 if (!ISSET(tp->t_state, TS_ISOPEN) && (tp->t_wopen == 0)) 1219 return; 1220 1221 if (sc->sc_rx_ready) { 1222 sc->sc_rx_ready = 0; 1223 serrxint(sc, tp); 1224 } 1225 1226 if (sc->sc_st_check) { 1227 sc->sc_st_check = 0; 1228 sermsrint(sc, tp); 1229 } 1230 1231 if (sc->sc_tx_done) { 1232 sc->sc_tx_done = 0; 1233 sertxint(sc, tp); 1234 } 1235 } 1236 1237 int 1238 sermintr(arg) 1239 void *arg; 1240 { 1241 struct ser_softc *sc = arg; 1242 u_char msr, delta; 1243 1244 msr = ~MFP->mf_gpip; 1245 delta = msr ^ sc->sc_msr; 1246 sc->sc_msr = sc->sc_msr & ~(MCR_CTS|MCR_DCD|MCR_RI); 1247 sc->sc_msr |= msr & (MCR_CTS|MCR_DCD|MCR_RI); 1248 1249 if (ISSET(delta, sc->sc_msr_mask)) { 1250 sc->sc_msr_delta |= delta; 1251 1252 /* 1253 * Stop output immediately if we lose the output 1254 * flow control signal or carrier detect. 1255 */ 1256 if (ISSET(~msr, sc->sc_msr_mask)) { 1257 sc->sc_tbc = 0; 1258 sc->sc_heldtbc = 0; 1259 #ifdef SER_DEBUG 1260 serstatus(sc, "sermintr "); 1261 #endif 1262 } 1263 1264 sc->sc_st_check = 1; 1265 } 1266 if (!ser_softintr_scheduled) 1267 add_sicallback((si_farg)sersoft, sc, 0); 1268 return 1; 1269 } 1270 1271 int 1272 sertrintr(arg) 1273 void *arg; 1274 { 1275 struct ser_softc *sc = arg; 1276 u_int put, cc; 1277 u_char rsr, tsr; 1278 1279 put = sc->sc_rbput; 1280 cc = sc->sc_rbavail; 1281 1282 rsr = MFP->mf_rsr; 1283 if (ISSET(rsr, RSR_BFULL|RSR_BREAK)) { 1284 for (; ISSET(rsr, RSR_BFULL|RSR_BREAK) && cc > 0; cc--) { 1285 sc->sc_rbuf[put] = MFP->mf_udr; 1286 sc->sc_lbuf[put] = rsr; 1287 put = (put + 1) & RXBUFMASK; 1288 if ((rsr & RSR_BREAK) && (MFP->mf_rsr & RSR_BREAK)) 1289 rsr = 0; 1290 else rsr = MFP->mf_rsr; 1291 } 1292 /* 1293 * Current string of incoming characters ended because 1294 * no more data was available. Schedule a receive event 1295 * if any data was received. Drop any characters that 1296 * we couldn't handle. 1297 */ 1298 sc->sc_rbput = put; 1299 sc->sc_rbavail = cc; 1300 sc->sc_rx_ready = 1; 1301 /* 1302 * See if we are in danger of overflowing a buffer. If 1303 * so, use hardware flow control to ease the pressure. 1304 */ 1305 if (sc->sc_rx_blocked == 0 && 1306 cc < sc->sc_r_hiwat) { 1307 sc->sc_rx_blocked = 1; 1308 ser_hwiflow(sc, 1); 1309 } 1310 /* 1311 * If we're out of space, throw away any further input. 1312 */ 1313 if (!cc) { 1314 while (ISSET(rsr, RSR_BFULL|RSR_BREAK)) { 1315 rsr = MFP->mf_udr; 1316 rsr = MFP->mf_rsr; 1317 } 1318 } 1319 } 1320 1321 /* 1322 * Done handling any receive interrupts. See if data can be 1323 * transmitted as well. Schedule tx done event if no data left 1324 * and tty was marked busy. 1325 */ 1326 tsr = MFP->mf_tsr; 1327 if (ISSET(tsr, TSR_BE)) { 1328 /* 1329 * If we've delayed a parameter change, do it now, and restart 1330 * output. 1331 */ 1332 if (sc->sc_heldchange) { 1333 ser_loadchannelregs(sc); 1334 sc->sc_heldchange = 0; 1335 sc->sc_tbc = sc->sc_heldtbc; 1336 sc->sc_heldtbc = 0; 1337 } 1338 /* Output the next character, if any. */ 1339 if (sc->sc_tbc > 0) { 1340 MFP->mf_udr = *sc->sc_tba; 1341 sc->sc_tbc--; 1342 sc->sc_tba++; 1343 } else if (sc->sc_tx_busy) { 1344 sc->sc_tx_busy = 0; 1345 sc->sc_tx_done = 1; 1346 } 1347 } 1348 1349 if (!ser_softintr_scheduled) 1350 add_sicallback((si_farg)sersoft, sc, 0); 1351 return 1; 1352 } 1353 1354 static int 1355 serspeed(speed) 1356 long speed; 1357 { 1358 #define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */ 1359 1360 int div, x, err; 1361 1362 if (speed <= 0) 1363 return (-1); 1364 1365 for (div = 4; div <= 64; div *= 4) { 1366 x = divrnd((SER_FREQ / div), speed); 1367 1368 /* 1369 * The value must fit in the timer-d dataregister. If 1370 * not, try another delay-mode. 1371 */ 1372 if ((x/2) > 255) 1373 continue; 1374 1375 /* 1376 * Baudrate to high for the interface or cannot be made 1377 * within tolerance. 1378 */ 1379 if (x <= 0) 1380 return (-1); 1381 1382 err = divrnd((SER_FREQ / div) * 1000, speed * x) - 1000; 1383 if (err < 0) 1384 err = -err; 1385 if (err > SER_TOLERANCE) 1386 continue; 1387 1388 /* 1389 * Translate 'div' to delay-code 1390 */ 1391 if (div == 4) 1392 div = 1; 1393 else if (div == 16) 1394 div = 3; 1395 else if (div == 64) 1396 div = 5; 1397 1398 return ((x/2) | (div << 8)); 1399 } 1400 return (-1); 1401 1402 #undef divrnd 1403 } 1404 1405 /* 1406 * Following are all routines needed for SER to act as console 1407 */ 1408 #include <dev/cons.h> 1409 1410 void 1411 sercnprobe(cp) 1412 struct consdev *cp; 1413 { 1414 /* 1415 * Activate serial console when DCD present... 1416 */ 1417 if (MFP->mf_gpip & MCR_DCD) { 1418 cp->cn_pri = CN_DEAD; 1419 return; 1420 } 1421 1422 /* initialize required fields */ 1423 /* XXX: LWP What unit? */ 1424 cp->cn_dev = makedev(cdevsw_lookup_major(&ser_cdevsw), 0); 1425 #if SERCONSOLE > 0 1426 cp->cn_pri = CN_REMOTE; /* Force a serial port console */ 1427 #else 1428 cp->cn_pri = CN_NORMAL; 1429 #endif /* SERCONSOLE > 0 */ 1430 } 1431 1432 void 1433 sercninit(cp) 1434 struct consdev *cp; 1435 { 1436 serinitcons(CONSBAUD); 1437 } 1438 1439 /* 1440 * Initialize UART to known state. 1441 */ 1442 void 1443 serinit(baud) 1444 int baud; 1445 { 1446 int ospeed = serspeed(baud); 1447 1448 MFP->mf_ucr = UCR_CLKDIV|UCR_8BITS|UCR_STOPB1; 1449 MFP->mf_rsr = RSR_ENAB; 1450 MFP->mf_tsr = TSR_ENAB; 1451 1452 single_inst_bclr_b(MFP->mf_tcdcr, 0x07); 1453 MFP->mf_tddr = ospeed; 1454 single_inst_bset_b(MFP->mf_tcdcr, (ospeed >> 8) & 0x0f); 1455 } 1456 1457 /* 1458 * Set UART for console use. Do normal init, then enable interrupts. 1459 */ 1460 void 1461 serinitcons(baud) 1462 int baud; 1463 { 1464 serinit(baud); 1465 1466 /* Set rts/dtr */ 1467 ym2149_rts(0); 1468 ym2149_dtr(0); 1469 1470 single_inst_bset_b(MFP->mf_imra, (IA_RRDY|IA_RERR|IA_TRDY|IA_TERR)); 1471 } 1472 1473 int 1474 sercngetc(dev) 1475 dev_t dev; 1476 { 1477 u_char stat, c; 1478 int s; 1479 1480 s = splserial(); 1481 while (!ISSET(stat = MFP->mf_rsr, RSR_BFULL)) { 1482 if (!ISSET(stat, RSR_ENAB)) /* XXX */ 1483 MFP->mf_rsr |= RSR_ENAB; 1484 if (stat & (RSR_FERR|RSR_PERR|RSR_OERR)) 1485 c = MFP->mf_udr; 1486 } 1487 c = MFP->mf_udr; 1488 splx(s); 1489 return c; 1490 } 1491 1492 u_int s_imra; 1493 u_int s_stat1, s_stat2, s_stat3; 1494 void 1495 sercnputc(dev, c) 1496 dev_t dev; 1497 int c; 1498 { 1499 int timo; 1500 u_char stat, imra; 1501 1502 /* Mask serial interrupts */ 1503 imra = MFP->mf_imra & (IA_RRDY|IA_RERR|IA_TRDY|IA_TERR); 1504 single_inst_bclr_b(MFP->mf_imra, imra); 1505 s_imra = imra; 1506 1507 /* wait for any pending transmission to finish */ 1508 timo = 50000; 1509 s_stat1 = MFP->mf_tsr; 1510 while (!ISSET(stat = MFP->mf_tsr, TSR_BE) && --timo) 1511 ; 1512 MFP->mf_udr = c; 1513 /* wait for this transmission to complete */ 1514 timo = 1500000; 1515 s_stat2 = MFP->mf_tsr; 1516 while (!ISSET(stat = MFP->mf_tsr, TSR_BE) && --timo) 1517 ; 1518 1519 s_stat3 = MFP->mf_tsr; 1520 /* Clear pending serial interrupts and re-enable */ 1521 MFP->mf_ipra = (u_int8_t)~imra; 1522 single_inst_bset_b(MFP->mf_imra, imra); 1523 } 1524 1525 void 1526 sercnpollc(dev, on) 1527 dev_t dev; 1528 int on; 1529 { 1530 1531 } 1532
Indexes created Thu Oct 02 14:10:14 GMT 2025