serreg.h revision 1.1 1 /* $NetBSD: serreg.h,v 1.1 1997/05/25 12:41:58 leo Exp $ */
2
3 /*-
4 * Copyright (c) 1997 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Leo Weppelman.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. All advertising materials mentioning features or use of this software
19 * must display the following acknowledgement:
20 * This product includes software developed by the NetBSD
21 * Foundation, Inc. and its contributors.
22 * 4. Neither the name of The NetBSD Foundation nor the names of its
23 * contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36 * POSSIBILITY OF SUCH DAMAGE.
37 */
38
39 #define SER_FREQ 153600 /* XXX: Assumes UCR_CLKDIV set! */
40 #define SER_TOLERANCE 30 /* Baud rate tolerance, in 0.1% units */
41
42 /* Usart Control Register */
43 #define UCR_PEVEN 0x02 /* Even parity */
44 #define UCR_PENAB 0x04 /* Parity enable */
45 #define UCR_SYNCH 0x00 /* Synchroneous mode */
46 #define UCR_STOPB1 0x08 /* 1 stopbit */
47 #define UCR_STOPB15 0x10 /* 1.5 stopbit */
48 #define UCR_STOPB2 0x18 /* 2 stopbits */
49 #define UCR_8BITS 0x00 /* 8 databits */
50 #define UCR_7BITS 0x20 /* 7 databits */
51 #define UCR_6BITS 0x40 /* 6 databits */
52 #define UCR_5BITS 0x60 /* 5 databits */
53 #define UCR_CLKDIV 0x80 /* Divide clock by 16 */
54
55 /* Receiver Status Register */
56 #define RSR_ENAB 0x01 /* Receiver enabled */
57 #define RSR_SS 0x02 /* Synchroneous strip */
58 #define RSR_CIP 0x04 /* Character in progress (async) */
59 #define RSR_BREAK 0x08 /* Break (async) */
60 #define RSR_MATCH 0x04 /* Character match (sync) */
61 #define RSR_FS 0x08 /* Found/Search (sync) */
62 #define RSR_FERR 0x10 /* Framing error */
63 #define RSR_PERR 0x20 /* Parity error */
64 #define RSR_OERR 0x40 /* Overrun error */
65 #define RSR_BFULL 0x80 /* Buffer Full */
66
67 /* Transmitter Status Register */
68 #define TSR_ENAB 0x01 /* Transmitter Enable */
69 #define TSR_SBREAK 0x08 /* Transmit Break */
70 #define TSR_END 0x10 /* End of character */
71 #define TSR_UE 0x40 /* Uart empty */
72 #define TSR_BE 0x80 /* Buffer empty */
73
74 /*
75 * These bits are a mixture of MFP.mf_gpip and PSG.ioa values.
76 * Luckily, they were all distinct.
77 */
78 #define MCR_RTS 0x08
79 #define MCR_CTS 0x04
80 #define MCR_DCD 0x02
81 #define MCR_DTR 0x10
82 #define MCR_RI 0x40
83