CP3100 revision 1.2.2.2
1 1.2.2.2 ad # $NetBSD: CP3100,v 1.2.2.2 2006/11/18 21:29:10 ad Exp $ 2 1.2.2.2 ad # 3 1.2.2.2 ad # CP3100 -- Certance CP3100 Kernel 4 1.2.2.2 ad # 5 1.2.2.2 ad 6 1.2.2.2 ad include "arch/evbarm/conf/std.cp3100" 7 1.2.2.2 ad 8 1.2.2.2 ad #options INCLUDE_CONFIG_FILE # embed config file in kernel binary 9 1.2.2.2 ad 10 1.2.2.2 ad # estimated number of users 11 1.2.2.2 ad 12 1.2.2.2 ad maxusers 32 13 1.2.2.2 ad 14 1.2.2.2 ad # Standard system options 15 1.2.2.2 ad 16 1.2.2.2 ad options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 17 1.2.2.2 ad options NTP # NTP phase/frequency locked loop 18 1.2.2.2 ad #options NMBCLUSTERS=1024 19 1.2.2.2 ad 20 1.2.2.2 ad # CPU options 21 1.2.2.2 ad 22 1.2.2.2 ad # For XScale systems 23 1.2.2.2 ad options CPU_XSCALE_80321 # Support the XScale core 24 1.2.2.2 ad makeoptions CPUFLAGS="-mcpu=xscale" 25 1.2.2.2 ad 26 1.2.2.2 ad # Architecture options 27 1.2.2.2 ad options XSCALE_CACHE_READ_WRITE_ALLOCATE 28 1.2.2.2 ad #options HZ=512 29 1.2.2.2 ad 30 1.2.2.2 ad # File systems 31 1.2.2.2 ad 32 1.2.2.2 ad file-system FFS # UFS 33 1.2.2.2 ad file-system LFS # log-structured file system 34 1.2.2.2 ad file-system MFS # memory file system 35 1.2.2.2 ad file-system NFS # Network file system 36 1.2.2.2 ad #file-system ADOSFS # AmigaDOS-compatible file system 37 1.2.2.2 ad #file-system EXT2FS # second extended file system (linux) 38 1.2.2.2 ad #file-system CD9660 # ISO 9660 + Rock Ridge file system 39 1.2.2.2 ad #file-system MSDOSFS # MS-DOS file system 40 1.2.2.2 ad file-system FDESC # /dev/fd 41 1.2.2.2 ad file-system KERNFS # /kern 42 1.2.2.2 ad file-system NULLFS # loopback file system 43 1.2.2.2 ad #file-system PORTAL # portal filesystem (still experimental) 44 1.2.2.2 ad file-system PROCFS # /proc 45 1.2.2.2 ad #file-system UMAPFS # NULLFS + uid and gid remapping 46 1.2.2.2 ad #file-system UNION # union file system 47 1.2.2.2 ad file-system PTYFS # /dev/pts/N support 48 1.2.2.2 ad 49 1.2.2.2 ad # File system options 50 1.2.2.2 ad #options QUOTA # UFS quotas 51 1.2.2.2 ad #options FFS_EI # FFS Endian Independant support 52 1.2.2.2 ad options NFSSERVER 53 1.2.2.2 ad options SOFTDEP 54 1.2.2.2 ad #options FFS_NO_SNAPSHOT # No FFS snapshot support 55 1.2.2.2 ad 56 1.2.2.2 ad # Networking options 57 1.2.2.2 ad 58 1.2.2.2 ad options GATEWAY # packet forwarding 59 1.2.2.2 ad options INET # IP + ICMP + TCP + UDP 60 1.2.2.2 ad options INET6 # IPV6 61 1.2.2.2 ad #options IPSEC # IP security 62 1.2.2.2 ad #options IPSEC_ESP # IP security (encryption part; define w/ IPSEC) 63 1.2.2.2 ad #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 64 1.2.2.2 ad #options IPSEC_DEBUG # debug for IP security 65 1.2.2.2 ad #options MROUTING # IP multicast routing 66 1.2.2.2 ad #options PIM # Protocol Independent Multicast 67 1.2.2.2 ad #options NS # XNS 68 1.2.2.2 ad #options NSIP # XNS tunneling over IP 69 1.2.2.2 ad #options ISO,TPIP # OSI 70 1.2.2.2 ad #options EON # OSI tunneling over IP 71 1.2.2.2 ad #options CCITT,LLC,HDLC # X.25 72 1.2.2.2 ad #options NETATALK # AppleTalk networking 73 1.2.2.2 ad #options PFIL_HOOKS # pfil(9) packet filter hooks 74 1.2.2.2 ad #options PPP_BSDCOMP # BSD-Compress compression support for PPP 75 1.2.2.2 ad #options PPP_DEFLATE # Deflate compression support for PPP 76 1.2.2.2 ad #options PPP_FILTER # Active filter support for PPP (requires bpf) 77 1.2.2.2 ad options IPFILTER_LOG # ipmon(8) log support 78 1.2.2.2 ad options IPFILTER_LOOKUP # ippool(8) support 79 1.2.2.2 ad #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 80 1.2.2.2 ad 81 1.2.2.2 ad options NFS_BOOT_BOOTP 82 1.2.2.2 ad options NFS_BOOT_DHCP 83 1.2.2.2 ad #options NFS_BOOT_BOOTPARAM 84 1.2.2.2 ad 85 1.2.2.2 ad # Compatibility options 86 1.2.2.2 ad 87 1.2.2.2 ad #options COMPAT_43 # 4.3BSD compatibility. 88 1.2.2.2 ad #options COMPAT_30 # NetBSD 3.0 compatibility. 89 1.2.2.2 ad #options COMPAT_20 # NetBSD 2.0 compatibility. 90 1.2.2.2 ad #options COMPAT_16 # NetBSD 1.6 compatibility. 91 1.2.2.2 ad #options COMPAT_15 # NetBSD 1.5 compatibility. 92 1.2.2.2 ad #options COMPAT_14 # NetBSD 1.4 compatibility. 93 1.2.2.2 ad #options COMPAT_13 # NetBSD 1.3 compatibility. 94 1.2.2.2 ad #options COMPAT_12 # NetBSD 1.2 compatibility. 95 1.2.2.2 ad #options COMPAT_11 # NetBSD 1.1 compatibility. 96 1.2.2.2 ad #options COMPAT_10 # NetBSD 1.0 compatibility. 97 1.2.2.2 ad #options COMPAT_09 # NetBSD 0.9 compatibility. 98 1.2.2.2 ad #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 99 1.2.2.2 ad options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 100 1.2.2.2 ad 101 1.2.2.2 ad # Shared memory options 102 1.2.2.2 ad 103 1.2.2.2 ad options SYSVMSG # System V-like message queues 104 1.2.2.2 ad options SYSVSEM # System V-like semaphores 105 1.2.2.2 ad #options SEMMNI=10 # number of semaphore identifiers 106 1.2.2.2 ad #options SEMMNS=60 # number of semaphores in system 107 1.2.2.2 ad #options SEMUME=10 # max number of undo entries per process 108 1.2.2.2 ad #options SEMMNU=30 # number of undo structures in system 109 1.2.2.2 ad options SYSVSHM # System V-like memory sharing 110 1.2.2.2 ad options SHMMAXPGS=2048 # 2048 pages is the default 111 1.2.2.2 ad options P1003_1B_SEMAPHORE # p1003.1b semaphore support 112 1.2.2.2 ad 113 1.2.2.2 ad # Device options 114 1.2.2.2 ad 115 1.2.2.2 ad #options MEMORY_DISK_HOOKS # boottime setup of ramdisk 116 1.2.2.2 ad #options MEMORY_DISK_ROOT_SIZE=3400 # Size in blocks 117 1.2.2.2 ad #options MEMORY_DISK_IS_ROOT # use memory disk as root 118 1.2.2.2 ad 119 1.2.2.2 ad # Console options. The default console is speed is 115200 baud. 120 1.2.2.2 ad options CONSPEED=115200 # Console speed 121 1.2.2.2 ad 122 1.2.2.2 ad # Miscellaneous kernel options 123 1.2.2.2 ad options KTRACE # system call tracing, a la ktrace(1) 124 1.2.2.2 ad options IRQSTATS # manage IRQ statistics 125 1.2.2.2 ad #options LKM # loadable kernel modules 126 1.2.2.2 ad #options KMEMSTATS # kernel memory statistics 127 1.2.2.2 ad #options SCSIVERBOSE # Verbose SCSI errors 128 1.2.2.2 ad #options PCIVERBOSE # Verbose PCI descriptions 129 1.2.2.2 ad #options MIIVERBOSE # Verbose MII autoconfuration messages 130 1.2.2.2 ad #options PCI_CONFIG_DUMP # verbosely dump PCI config space 131 1.2.2.2 ad #options DDB_KEYCODE=0x40 132 1.2.2.2 ad options USERCONF # userconf(4) support 133 1.2.2.2 ad #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 134 1.2.2.2 ad #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 135 1.2.2.2 ad 136 1.2.2.2 ad # Development and Debugging options 137 1.2.2.2 ad 138 1.2.2.2 ad options PERFCTRS # performance counters 139 1.2.2.2 ad options DIAGNOSTIC # internally consistency checks 140 1.2.2.2 ad #options DEBUG 141 1.2.2.2 ad #options PMAP_DEBUG # Enable pmap_debug_level code 142 1.2.2.2 ad #options IPKDB # remote kernel debugging 143 1.2.2.2 ad #options VERBOSE_INIT_ARM # verbose bootstraping messages 144 1.2.2.2 ad options DDB # in-kernel debugger 145 1.2.2.2 ad options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 146 1.2.2.2 ad #makeoptions DEBUG="-g" # compile full symbol table 147 1.2.2.2 ad options SYMTAB_SPACE=310000 148 1.2.2.2 ad 149 1.2.2.2 ad config netbsd root on ? type ? 150 1.2.2.2 ad config netbsd-wm0 root on wm0 type nfs 151 1.2.2.2 ad config netbsd-wd0 root on wd0a type ffs 152 1.2.2.2 ad config netbsd-sd0 root on sd0a type ffs 153 1.2.2.2 ad 154 1.2.2.2 ad # The main bus device 155 1.2.2.2 ad mainbus0 at root 156 1.2.2.2 ad 157 1.2.2.2 ad # The boot CPU 158 1.2.2.2 ad cpu0 at mainbus? 159 1.2.2.2 ad 160 1.2.2.2 ad # On-board device support 161 1.2.2.2 ad obio* at mainbus? 162 1.2.2.2 ad 163 1.2.2.2 ad # Console UART. 164 1.2.2.2 ad # Note: "xint 4" is actually the HPI# pin 165 1.2.2.2 ad com0 at obio? addr 0xfe800000 xint 4 166 1.2.2.2 ad 167 1.2.2.2 ad # i80321 I/O Processor peripheral support 168 1.2.2.2 ad iopxs* at mainbus? 169 1.2.2.2 ad 170 1.2.2.2 ad iopaau* at iopxs? # Application Accelerator Unit 171 1.2.2.2 ad iopiic* at iopxs? # I2C Controller Unit(s) 172 1.2.2.2 ad iic0 at iopiic? 173 1.2.2.2 ad iic1 at iopiic? 174 1.2.2.2 ad iopwdog* at iopxs? # Watchdog timer 175 1.2.2.2 ad pci0 at iopxs? bus ? # PCI/PCI-X support 176 1.2.2.2 ad 177 1.2.2.2 ad # IIC Devices 178 1.2.2.2 ad m41trtc0 at iic1 addr 0x68 # M41T11 Realtime Clock 179 1.2.2.2 ad 180 1.2.2.2 ad # 181 1.2.2.2 ad # Storage devices 182 1.2.2.2 ad # 183 1.2.2.2 ad 184 1.2.2.2 ad # Serial ATA: i31244 185 1.2.2.2 ad artsata* at pci? dev ? function ? # Intel i31244 SATA controller 186 1.2.2.2 ad atabus* at ata? 187 1.2.2.2 ad 188 1.2.2.2 ad # ATA Disks 189 1.2.2.2 ad wd* at atabus? drive ? flags 0x0000 190 1.2.2.2 ad 191 1.2.2.2 ad # SCSI: Symbios Logic 53c1010 192 1.2.2.2 ad # 193 1.2.2.2 ad # Wire down the Target/Host instances. Disable the target contoller for 194 1.2.2.2 ad # now as we don't currently support SCSI target mode. 195 1.2.2.2 ad siop0 at pci0 dev 2 function 1 # Host controller 196 1.2.2.2 ad #siop1 at pci0 dev 2 function 0 # Target controller 197 1.2.2.2 ad scsibus* at scsi? 198 1.2.2.2 ad 199 1.2.2.2 ad # SCSI Devices 200 1.2.2.2 ad sd* at scsibus? target ? lun ? # SCSI disk drives 201 1.2.2.2 ad st* at scsibus? target ? lun ? # SCSI tape drives 202 1.2.2.2 ad cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 203 1.2.2.2 ad ch* at scsibus? target ? lun ? # SCSI autochangers 204 1.2.2.2 ad ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices 205 1.2.2.2 ad ss* at scsibus? target ? lun ? # SCSI Scanners 206 1.2.2.2 ad uk* at scsibus? target ? lun ? # SCSI unknown 207 1.2.2.2 ad 208 1.2.2.2 ad # 209 1.2.2.2 ad # Networking devices 210 1.2.2.2 ad # 211 1.2.2.2 ad 212 1.2.2.2 ad # PCI network devices 213 1.2.2.2 ad wm* at pci? dev ? function ? # Intel i82546EB Gig-E 214 1.2.2.2 ad 215 1.2.2.2 ad # MII/PHY support 216 1.2.2.2 ad makphy* at mii? phy ? # Marvell 88E1000 PHYs 217 1.2.2.2 ad 218 1.2.2.2 ad # Pseudo-Devices 219 1.2.2.2 ad 220 1.2.2.2 ad # disk/mass storage pseudo-devices 221 1.2.2.2 ad pseudo-device ccd 4 # concatenated/striped disk devices 222 1.2.2.2 ad #pseudo-device cgd 4 # cryptographic disk devices 223 1.2.2.2 ad pseudo-device raid 8 # RAIDframe disk driver 224 1.2.2.2 ad options RAID_AUTOCONFIG # auto-configuration of RAID components 225 1.2.2.2 ad # Options to enable various other RAIDframe RAID types. 226 1.2.2.2 ad #options RF_INCLUDE_EVENODD=1 227 1.2.2.2 ad #options RF_INCLUDE_RAID5_RS=1 228 1.2.2.2 ad #options RF_INCLUDE_PARITYLOGGING=1 229 1.2.2.2 ad #options RF_INCLUDE_CHAINDECLUSTER=1 230 1.2.2.2 ad #options RF_INCLUDE_INTERDECLUSTER=1 231 1.2.2.2 ad #options RF_INCLUDE_PARITY_DECLUSTERING=1 232 1.2.2.2 ad #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 233 1.2.2.2 ad #pseudo-device fss 4 # file system snapshot device 234 1.2.2.2 ad 235 1.2.2.2 ad #pseudo-device md 1 # memory disk device (ramdisk) 236 1.2.2.2 ad pseudo-device vnd # disk-like interface to files 237 1.2.2.2 ad options VND_COMPRESSION # compressed vnd(4) 238 1.2.2.2 ad 239 1.2.2.2 ad # network pseudo-devices 240 1.2.2.2 ad pseudo-device bpfilter # Berkeley packet filter 241 1.2.2.2 ad pseudo-device ipfilter # IP filter (firewall) and NAT 242 1.2.2.2 ad pseudo-device loop # network loopback 243 1.2.2.2 ad #pseudo-device tun # network tunneling over tty 244 1.2.2.2 ad #pseudo-device vlan # IEEE 802.1q encapsulation 245 1.2.2.2 ad #pseudo-device bridge # simple inter-network bridging 246 1.2.2.2 ad 247 1.2.2.2 ad # miscellaneous pseudo-devices 248 1.2.2.2 ad pseudo-device pty # pseudo-terminals 249 1.2.2.2 ad pseudo-device rnd # /dev/random and in-kernel generator 250 1.2.2.2 ad pseudo-device clockctl # user control of clock subsystem 251 1.2.2.2 ad pseudo-device ksyms # /dev/ksyms 252 1.2.2.2 ad 253 1.2.2.2 ad # data mover pseudo-devices 254 1.2.2.2 ad #pseudo-device swdmover # softare dmover(9) back-end 255 1.2.2.2 ad #pseudo-device dmoverio # /dev/dmover dmover(9) interface 256
Indexes created Fri Oct 31 11:10:07 GMT 2025