xref: /src/sys/arch/evbarm/conf/KOBO

#	$NetBSD: KOBO,v 1.8 2017/03/20 14:06:43 skrll Exp $
#
#	KOBO -- http://kobo.com
#

include	"arch/evbarm/conf/std.kobo"
include	"arch/evbarm/conf/GENERIC.common"

# CPU options
options 	CPU_CORTEXA8	# Support the ARM-v7a core
options		IMX51
options 	IMX50
options 	IMX508

# Architecture options

options 	MEMSTART=0x70000000
options 	MEMSIZE=256
options 	IMX51_IPGCLK_FREQ=50000000   # XXX This value is not correct.

# Device options

# Console options.    also need IMXUARTCONSOLE
options 	CONSDEVNAME="\"imxuart\"",CONADDR=0x53fc0000
options 	CONSPEED=115200	# Console speed

#options 	DIAGNOSTIC	# internal consistency checks
#options 	DEBUG
#options 	KGDB
makeoptions	DEBUG="-g"	# compile full symbol table
makeoptions	COPY_SYMTAB=1

# Valid options for BOOT_ARGS:
#  single		Boot to single user only
#  kndb			Give control to kernel debugger
#  ask			Ask for file name to reboot from
#  pmapdebug=<n>	If PMAP_DEBUG, set pmap_debug_level to <n>
#  memorydisk=<n>	Set memorydisk size to <n> KB
#  quiet		Show aprint_naive output
#  verbose		Show aprint_normal and aprint_verbose output
options		BOOT_ARGS="\"verbose\""

# Kernel root file system and dump configuration.
config		netbsd		root on ? type ?
config		netbsd-ld0	root on ld0 type ffs

# The main bus device
mainbus0	at root

# The boot cpu
cpu*		at mainbus?

# Devices
# On-chip
# On-chip bus
axi0		at mainbus?

# Interrupt Cotroller
tzic0		at axi? addr 0x0fffc000 size 0x4000 irqbase 0

# Serial
#imxuart0	at axi? addr 0x53fbc000 irq 31		# UART1
imxuart1	at axi? addr 0x53fc0000 irq 32
#imxuart2	at axi? addr 0x5000c000 irq 33
options		IMXUARTCONSOLE

# Clock Control
imxccm0		at axi? addr 0x53fd4000
options		IMX51_CKIL_FREQ=32768

# Enhanced Periodic Interrupt Timer
imxclock0	at axi? addr 0x53fac000 size 0x4000 irq 40

# IOMUX
imxiomux0	at axi? addr 0x53fa8000

# WatchDog
imxwdog0	at axi? addr 0x53f98000 irq 58 flags 0

# GPIO
imxgpio0	at axi? addr 0x53f84000 irqbase 128 irq 50
imxgpio1	at axi? addr 0x53f88000 irqbase 160 irq 52
imxgpio2	at axi? addr 0x53f8c000 irqbase 192 irq 54
imxgpio3	at axi? addr 0x53f90000 irqbase 224 irq 56
imxgpio4	at axi? addr 0x53fdc000 irqbase 256 irq 103
imxgpio5	at axi? addr 0x53fe0000 irqbase 288 irq 105

# EPDC E-Ink Controller
#epdc0		at axi? addr 0x41010000 size 0x2000 irq 27
#wsdisplay0	at wsemuldisplaydev? console ?
#wsdisplay*	at wsemuldisplaydev?
#options		EPDC_DEBUG=10
#options		EINK_DEBUG
#options		IMXEPDCCONSOLE

# I2C
imxi2c0		at axi? addr 0x63fc8000 irq 62
imxi2c1		at axi? addr 0x63fc4000 irq 63
#imxi2c2	at axi? addr 0x53fec000 irq 64

# IIC
iic*		at imxi2c?

lmtemp*		at iic1 addr 0x48		# LM75 temperature sensor

# SD/MMC
sdhc0		at axi? addr 0x50004000 irq 1	# eSDHC1
sdhc1		at axi? addr 0x50008000 irq 2	# eSDHC2
sdhc2		at axi? addr 0x50020000 irq 3	# eSDHC3
#sdhc3		at axi? addr 0x50024000 irq 4	# eSDHC4
sdmmc*		at sdhc?
ld*		at sdmmc?		# MMC/SD card
#options 	SDHC_DEBUG
#options 	SDMMC_DEBUG

# USB
imxusbc0	at axi? addr 0x53f80000
ehci0		at imxusbc0	unit 0	irq 18 # OTG
#ehci1		at imxusbc0	unit 1	irq 14 # Host1

usb*		at ehci?

# USB device drivers, just as soon as we have something to attach them to
include "dev/usb/usbdevices.config"

midi*		at midibus?

ukphy*		at mii? phy ?

# local configuration
cinclude "arch/evbarm/conf/KOBO.local"