xref: /src/sys/arch/evbarm/conf/NETWALKER

#	$NetBSD: NETWALKER,v 1.41 2020/09/29 19:58:50 jmcneill Exp $
#
#	NETWALKER -- http://www.sharp.co.jp/netwalker/
#

include	"arch/evbarm/conf/std.netwalker"
include	"arch/evbarm/conf/GENERIC.common"

# CPU options
options 	CPU_CORTEX	# Support the ARM-v7a core
options 	IMX51

# Device options

# Console options.    also need IMXUARTCONSOLE
options 	CONSDEVNAME="\"imxuart\"",CONADDR=0x73fbc000
options 	CONSPEED=115200	# Console speed

# Development and Debugging options
#options 	DEBUG
#options 	KGDB
makeoptions	DEBUG="-g"	# compile full symbol table
makeoptions	COPY_SYMTAB=1

# Valid options for BOOT_ARGS:
#  single		Boot to single user only
#  kdb			Give control to kernel debugger
#  ask			Ask for file name to reboot from
#  memorydisk=<n>	Set memorydisk size to <n> KB
#  quiet		Show aprint_naive output
#  verbose		Show aprint_normal and aprint_verbose output
#  console=(fb|serial)	Select console device
options 	BOOT_ARGS="\"verbose console=fb\""
#options 	BOOT_ARGS="\"verbose\""

# Kernel root file system and dump configuration.
config		netbsd		root on ? type ?
config		netbsd-ld0	root on ld0 type ffs

# The main bus device
mainbus0	at root

# The boot cpu
cpu0		at mainbus?

# Devices
# On-chip
# On-chip bus
axi0		at mainbus?

# Interrupt Cotroller
tzic0		at axi? addr 0xe0000000 size 0x4000 irqbase 0

# Serial
imxuart0	at axi? addr 0x73fbc000 irq 31		# UART1
#imxuart1	at axi? addr 0x73fc0000 irq 32
#imxuart2	at axi? addr 0x7000c000 irq 33
#options	IMXUARTCONSOLE

# Clock Control
imxccm0		at axi? addr 0x73fd4000
options		IMX51_CKIL_FREQ=32768
#options	IMXCCMDEBUG

# Enhanced Periodic Interrupt Timer
imxclock0	at axi? addr 0x73fac000 size 0x4000 irq 40
imxclock1	at axi? addr 0x73fb0000 size 0x4000 irq 41

# IOMUX
imxiomux0	at axi? addr 0x73fa8000

# WatchDog
imxwdog0	at axi? addr 0x73f98000 irq 58 flags 0

# GPIO
imxgpio0	at axi? addr 0x73f84000 irqbase 128 irq 50
imxgpio1	at axi? addr 0x73f88000 irqbase 160 irq 52
imxgpio2	at axi? addr 0x73f8c000 irqbase 192 irq 54
imxgpio3	at axi? addr 0x73f90000 irqbase 224 irq 56
gpio*		at imxgpio?

# I2C
imxi2c0		at axi? addr 0x83fc8000 irq 62
imxi2c1		at axi? addr 0x83fc4000 irq 63

# IIC
iic*		at imxi2c?

# SPI bus
imxspi0		at axi? addr 0x70010000 irq 36 flags 1
#imxspi1	at axi? addr 0x83fac000 irq 37 flags 1
#imxspi2	at axi? addr 0x83fc0000 irq 38 flags 0
spi0		at imxspi0 # eCSPI1
#spi1		at imxspi1 # eCSPI2
#spi2		at imxspi2 # CSPI1
options		IMXSPINSLAVES=3
#options	IMXSPI_DEBUG=10

# Optical Joystick
oj6sh0		at spi0 slave 2
#options	OJ6SH_DEBUG=4
options		OJ6SH_UP_X_LEFT_Y
wsmouse*	at oj6sh? mux 0

mousebtn0	at gpio1 offset 22 mask 0x03 # intr 182, 183
#options	MOUSEBTN_POLLING
wsmouse*	at mousebtn? mux 0

pwrbtn0		at gpio1 offset 21 mask 0x01 # intr 181
lidsw0		at gpio3 offset 12 mask 0x01 # intr 236
imxpwm0		at axi? addr 0x73FB4000 irq 61

# SPI NOR-Flash
spiflash0	at spiflashbus?
m25p0		at spi0 slave 1

# SD/MMC
sdhc0    	at axi? addr 0x70004000 irq 1	     # eSDHC1
#sdhc1   	at axi? addr 0x70008000 irq 2	     # eSDHC2
sdmmc*		at sdhc?
ld*		at sdmmc?			# MMC/SD card
#options 	SDHC_DEBUG
#options 	SDMMC_DEBUG

# USB
imxusbc0  at axi?  addr 0x73f80000
ehci0	  at imxusbc0	unit 0	irq 18 # OTG
ehci1	  at imxusbc0	unit 1	irq 14 # Host1
#ehci2	  at imxusbc0	unit 2	irq 16 # Host2
#ehci3	  at imxusbc0	unit 3	irq 17 # Host3

usb*		at ehci?

# USB device drivers
include "dev/usb/usbdevices.config"

midi*		at midibus?

rgephy*		at mii? phy ?
rlphy*		at mii? phy ?
ukphy*		at mii? phy ?

# IPUv3 LCD Controller
ipu0		at axi?
#options	IPUV3_DEBUG=1
#options	LCD_DEBUG

# Framebuffer console
genfb*		at ipu?
wsdisplay*	at genfb?
#options 	GENFB_SHADOWFB

# various options for wscons - we try to look as much like a standard
# sun console as possible
options 	VCONS_DRAW_INTR
options 	WSEMUL_VT100		# sun terminal emulation
options 	WS_DEFAULT_FG=WSCOL_WHITE
options 	WS_DEFAULT_BG=WSCOL_BLACK
options 	WS_KERNEL_FG=WSCOL_GREEN
options 	WS_KERNEL_BG=WSCOL_BLACK
options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some more ioctls
options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling
options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
options 	WSDISPLAY_DEFAULTSCREENS=4

# Pseudo-Devices

# wscons pseudo-devices
pseudo-device	wsmux			# mouse & keyboard multiplexor
pseudo-device	wsfont

# local configuration
cinclude "arch/evbarm/conf/NETWALKER.local"