RPI revision 1.26 1 #
2 # $NetBSD: RPI,v 1.26 2013/03/02 02:42:12 christos Exp $
3 #
4 # RPi -- Raspberry Pi
5 #
6
7 include "arch/evbarm/conf/std.rpi"
8
9 # estimated number of users
10
11 maxusers 32
12
13 # Standard system options
14
15 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
16 #options NTP # NTP phase/frequency locked loop
17
18 # CPU options
19
20 options CPU_ARM1176
21 options BCM2835
22 options PMAPCOUNTERS
23 options FPU_VFP
24
25 # Architecture options
26
27 # File systems
28
29 file-system FFS # UFS
30 #file-system LFS # log-structured file system
31 file-system MFS # memory file system
32 file-system NFS # Network file system
33 #file-system ADOSFS # AmigaDOS-compatible file system
34 file-system EXT2FS # second extended file system (linux)
35 #file-system CD9660 # ISO 9660 + Rock Ridge file system
36 file-system MSDOSFS # MS-DOS file system
37 #file-system FDESC # /dev/fd
38 file-system KERNFS # /kern
39 file-system NULLFS # loopback file system
40 file-system PROCFS # /proc
41 #file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs)
42 #file-system UMAPFS # NULLFS + uid and gid remapping
43 #file-system UNION # union file system
44 file-system TMPFS # memory file system
45 file-system PTYFS # /dev/pts/N support
46
47 # File system options
48 options QUOTA # legacy UFS quotas
49 options QUOTA2 # new, in-filesystem UFS quotas
50 #options FFS_EI # FFS Endian Independent support
51 #options NFSSERVER
52 options WAPBL # File system journaling support
53 #options FFS_NO_SNAPSHOT # No FFS snapshot support
54
55 # Networking options
56
57 #options GATEWAY # packet forwarding
58 options INET # IP + ICMP + TCP + UDP
59 options INET6 # IPV6
60 #options IPSEC # IP security
61 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
62 #options IPSEC_DEBUG # debug for IP security
63 #options MROUTING # IP multicast routing
64 #options PIM # Protocol Independent Multicast
65 #options NS # XNS
66 #options NSIP # XNS tunneling over IP
67 #options CCITT,LLC,HDLC # X.25
68 #options NETATALK # AppleTalk networking
69 #options PFIL_HOOKS # pfil(9) packet filter hooks
70 #options PPP_BSDCOMP # BSD-Compress compression support for PPP
71 #options PPP_DEFLATE # Deflate compression support for PPP
72 #options PPP_FILTER # Active filter support for PPP (requires bpf)
73 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
74
75 #options NFS_BOOT_BOOTP
76 #options NFS_BOOT_DHCP
77 #options NFS_BOOT_BOOTSTATIC
78 #options NFS_BOOTSTATIC_MYIP="\"192.168.1.4\""
79 #options NFS_BOOTSTATIC_GWIP="\"192.168.1.1\""
80 #options NFS_BOOTSTATIC_MASK="\"255.255.255.0\""
81 #options NFS_BOOTSTATIC_SERVADDR="\"192.168.1.1\""
82 #options NFS_BOOTSTATIC_SERVER="\"192.168.1.1:/nfs/sdp2430\""
83
84 options NFS_BOOT_RWSIZE=1024
85
86 # Compatibility options
87
88 #options COMPAT_43 # 4.3BSD compatibility.
89 options COMPAT_60 # NetBSD 6.0 compatibility.
90 #options COMPAT_50 # NetBSD 5.0 compatibility.
91 #options COMPAT_40 # NetBSD 4.0 compatibility.
92 #options COMPAT_30 # NetBSD 3.0 compatibility.
93 #options COMPAT_20 # NetBSD 2.0 compatibility.
94 #options COMPAT_16 # NetBSD 1.6 compatibility.
95 #options COMPAT_15 # NetBSD 1.5 compatibility.
96 #options COMPAT_14 # NetBSD 1.4 compatibility.
97 #options COMPAT_13 # NetBSD 1.3 compatibility.
98 #options COMPAT_12 # NetBSD 1.2 compatibility.
99 #options COMPAT_11 # NetBSD 1.1 compatibility.
100 #options COMPAT_10 # NetBSD 1.0 compatibility.
101 #options COMPAT_09 # NetBSD 0.9 compatibility.
102 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
103 #options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
104
105 # Shared memory options
106
107 options SYSVMSG # System V-like message queues
108 options SYSVSEM # System V-like semaphores
109 #options SEMMNI=10 # number of semaphore identifiers
110 #options SEMMNS=60 # number of semaphores in system
111 #options SEMUME=10 # max number of undo entries per process
112 #options SEMMNU=30 # number of undo structures in system
113 options SYSVSHM # System V-like memory sharing
114
115 # Device options
116
117 #options MEMORY_DISK_HOOKS # boottime setup of ramdisk
118 #options MEMORY_DISK_ROOT_SIZE=8192 # Size in blocks
119 #options MEMORY_DISK_DYNAMIC
120 #options MINIROOTSIZE=1000 # Size in blocks
121 #options MEMORY_DISK_IS_ROOT # use memory disk as root
122
123 # Miscellaneous kernel options
124 options KTRACE # system call tracing, a la ktrace(1)
125 #options KMEMSTATS # kernel memory statistics
126 #options SCSIVERBOSE # Verbose SCSI errors
127 #options MIIVERBOSE # Verbose MII autoconfuration messages
128 #options DDB_KEYCODE=0x40
129 #options USERCONF # userconf(4) support
130 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
131
132 # Development and Debugging options
133 #options PERFCTRS # performance counters
134 options DIAGNOSTIC # internally consistency checks
135 options DEBUG
136 #options LOCKDEBUG
137 #options IPKDB # remote kernel debugging
138 #options VERBOSE_INIT_ARM # verbose bootstraping messages
139 options DDB # in-kernel debugger
140 options DDB_ONPANIC=1
141 options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
142 #options KGDB
143 makeoptions DEBUG="-g" # compile full symbol table
144 options SYMTAB_SPACE=800000
145 options PLCONSOLE
146 #options PLCONSOLE,PLCOMCNUNIT=0,PLCONSPEED=115200,PLCONMODE=0xB00
147
148 ## USB Debugging options
149 options USB_DEBUG
150 #options EHCI_DEBUG
151 #options OHCI_DEBUG
152 #options UHUB_DEBUG
153
154
155 # Valid options for BOOT_ARGS:
156 # single Boot to single user only
157 # kdb Give control to kernel debugger
158 # ask Ask for file name to reboot from
159 # pmapdebug=<n> If PMAP_DEBUG, set pmap_debug_level to <n>
160 # memorydisk=<n> Set memorydisk size to <n> KB
161 # quiet Show aprint_naive output
162 # verbose Show aprint_normal and aprint_verbose output
163 #options BOOT_ARGS="\"\""
164
165 config netbsd root on ? type ?
166
167 # The main bus device
168 mainbus0 at root
169
170 # The cpu
171 cpu0 at mainbus?
172
173 # OBIO
174 obio0 at mainbus?
175
176 # Interrupt Controller
177 bcmicu0 at obio?
178
179 # VC Mailbox
180 bcmmbox0 at obio?
181 vcmbox0 at bcmmbox0
182
183 # PL011 uart
184 plcom0 at obio?
185
186 # Framebuffer console
187 genfb0 at obio?
188 wsdisplay* at genfb?
189
190 # System timer
191 bcmtmr0 at obio?
192
193 # Power management, Reset controller and Watchdog registers
194 bcmpm0 at obio?
195
196 # Random number generator
197 bcmrng0 at obio?
198
199 # Arasan SD/MMC Interface
200 sdhc* at obio?
201 sdmmc* at sdhc?
202
203 ld* at sdmmc?
204
205 # On-board USB
206 dotg* at obio?
207 usb* at dotg?
208
209 # USB device drivers, just as soon as we have something to attach them to
210 include "dev/usb/usbdevices.config"
211
212 ukphy* at mii? phy ?
213
214 # Broadcom Serial Control (I2C)
215 bsciic* at obio?
216 iic* at i2cbus?
217
218 # SPI controller
219 bcmspi* at obio?
220 spi* at spibus?
221
222 # various options for wscons - we try to look as much like a standard
223 # sun console as possible
224 options WSEMUL_VT100 # sun terminal emulation
225 options WS_DEFAULT_FG=WSCOL_WHITE
226 options WS_DEFAULT_BG=WSCOL_BLACK
227 options WS_KERNEL_FG=WSCOL_GREEN
228 options WS_KERNEL_BG=WSCOL_BLACK
229 options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
230 options WSDISPLAY_COMPAT_SYSCONS # emulate some more ioctls
231 options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
232 options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
233 options WSDISPLAY_DEFAULTSCREENS=4
234
235 #options FONT_QVSS8x15
236 #options FONT_GALLANT12x22 # the console font
237
238 # Pseudo-Devices
239
240 # disk/mass storage pseudo-devices
241 #pseudo-device fss # file system snapshot device
242
243 pseudo-device md # memory disk device (ramdisk)
244 pseudo-device vnd # disk-like interface to files
245 #pseudo-device putter # for puffs and pud
246
247 # network pseudo-devices
248 pseudo-device bpfilter # Berkeley packet filter
249 #pseudo-device carp # Common Address Redundancy Protocol
250 #pseudo-device ipfilter # IP filter (firewall) and NAT
251 pseudo-device loop # network loopback
252 #pseudo-device kttcp # network loopback
253 #pseudo-device ppp # Point-to-Point Protocol
254 #pseudo-device pppoe # PPP over Ethernet (RFC 2516)
255 #options PPPOE_SERVER # Enable PPPoE server via link0
256 #pseudo-device sl # Serial Line IP
257 #pseudo-device strip # Starmode Radio IP (Metricom)
258 #pseudo-device irframetty # IrDA frame line discipline
259 #pseudo-device tap # virtual Ethernet
260 #pseudo-device tun # network tunneling over tty
261 #pseudo-device gre # generic L3 over IP tunnel
262 #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC 1933)
263 #pseudo-device faith # IPv[46] TCP relay translation i/f
264 #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
265 #pseudo-device vlan # IEEE 802.1q encapsulation
266 #pseudo-device bridge # simple inter-network bridging
267 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
268 #pseudo-device agr # IEEE 802.3ad link aggregation
269 #pseudo-device pf # PF packet filter
270 #pseudo-device pflog # PF log if
271
272 # miscellaneous pseudo-devices
273 pseudo-device pty # pseudo-terminals
274 #options RND_COM
275 #pseudo-device clockctl # user control of clock subsystem
276 pseudo-device ksyms # /dev/ksyms
277 pseudo-device lockstat # lock profiling
278
279 # wscons pseudo-devices
280 pseudo-device wsmux # mouse & keyboard multiplexor
281 pseudo-device wsfont
282
283 # data mover pseudo-devices
284 #pseudo-device swdmover # software dmover(9) back-end
285 #pseudo-device dmoverio # /dev/dmover dmover(9) interface
286
287 # local configuration
288 cinclude "arch/evbarm/conf/RPI.local"
289