SMDK2800 revision 1.8 1 1.8 thorpej # $NetBSD: SMDK2800,v 1.8 2003/12/13 23:13:41 thorpej Exp $
2 1.1 bsh #
3 1.1 bsh # SMDK2800 -- Samsung's S3C2800 evaluation board.
4 1.1 bsh #
5 1.1 bsh
6 1.1 bsh include "arch/evbarm/conf/std.smdk2800"
7 1.1 bsh
8 1.1 bsh #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
9 1.1 bsh
10 1.1 bsh # Enable the hooks used for initializing the root memory-disk.
11 1.2 bsh #options MEMORY_DISK_HOOKS
12 1.2 bsh #options MEMORY_DISK_DYNAMIC
13 1.2 bsh #options MEMORY_DISK_IS_ROOT # force root on memory disk
14 1.2 bsh #options MEMORY_DISK_SERVER=0 # no userspace memory disk support
15 1.1 bsh #options MEMORY_DISK_ROOT_SIZE=4096 # size of memory disk, in blocks
16 1.1 bsh #options MEMORY_DISK_ROOT_SIZE=2880 # 1.44M, same as a floppy
17 1.1 bsh
18 1.1 bsh # estimated number of users
19 1.1 bsh
20 1.1 bsh maxusers 32
21 1.1 bsh
22 1.1 bsh # Standard system options
23 1.1 bsh
24 1.1 bsh options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
25 1.1 bsh options NTP # NTP phase/frequency locked loop
26 1.1 bsh
27 1.1 bsh # CPU options
28 1.1 bsh
29 1.1 bsh options CPU_ARM9 # Support the ARM9TDMI core
30 1.1 bsh makeoptions COPTS="-O2 -march=armv4"
31 1.1 bsh
32 1.2 bsh options S3C2XX0_XTAL_CLK=6000000 # 6MHz external Xtal
33 1.2 bsh
34 1.1 bsh # Architecture options
35 1.1 bsh
36 1.1 bsh # File systems
37 1.1 bsh
38 1.1 bsh file-system FFS # UFS
39 1.1 bsh #file-system LFS # log-structured file system
40 1.1 bsh file-system MFS # memory file system
41 1.1 bsh file-system NFS # Network file system
42 1.1 bsh #file-system ADOSFS # AmigaDOS-compatible file system
43 1.1 bsh #file-system EXT2FS # second extended file system (linux)
44 1.1 bsh #file-system CD9660 # ISO 9660 + Rock Ridge file system
45 1.1 bsh #file-system MSDOSFS # MS-DOS file system
46 1.1 bsh #file-system FDESC # /dev/fd
47 1.1 bsh file-system KERNFS # /kern
48 1.1 bsh #file-system NULLFS # loopback file system
49 1.1 bsh #file-system PORTAL # portal filesystem (still experimental)
50 1.1 bsh file-system PROCFS # /proc
51 1.1 bsh #file-system UMAPFS # NULLFS + uid and gid remapping
52 1.1 bsh #file-system UNION # union file system
53 1.1 bsh
54 1.1 bsh # File system options
55 1.1 bsh #options QUOTA # UFS quotas
56 1.1 bsh #options FFS_EI # FFS Endian Independant support
57 1.1 bsh #options NFSSERVER
58 1.1 bsh options SOFTDEP
59 1.1 bsh
60 1.1 bsh # Networking options
61 1.1 bsh
62 1.1 bsh #options GATEWAY # packet forwarding
63 1.1 bsh options INET # IP + ICMP + TCP + UDP
64 1.1 bsh options INET6 # IPV6
65 1.1 bsh #options IPSEC # IP security
66 1.1 bsh #options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
67 1.1 bsh #options IPSEC_DEBUG # debug for IP security
68 1.1 bsh #options MROUTING # IP multicast routing
69 1.1 bsh #options NS # XNS
70 1.1 bsh #options NSIP # XNS tunneling over IP
71 1.1 bsh #options ISO,TPIP # OSI
72 1.1 bsh #options EON # OSI tunneling over IP
73 1.1 bsh #options CCITT,LLC,HDLC # X.25
74 1.1 bsh #options NETATALK # AppleTalk networking
75 1.1 bsh #options PFIL_HOOKS # pfil(9) packet filter hooks
76 1.1 bsh #options PPP_BSDCOMP # BSD-Compress compression support for PPP
77 1.1 bsh #options PPP_DEFLATE # Deflate compression support for PPP
78 1.1 bsh #options PPP_FILTER # Active filter support for PPP (requires bpf)
79 1.1 bsh #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
80 1.1 bsh
81 1.1 bsh options NFS_BOOT_BOOTP
82 1.1 bsh options NFS_BOOT_DHCP
83 1.1 bsh options NFS_BOOT_BOOTPARAM
84 1.1 bsh
85 1.1 bsh # Compatibility options
86 1.1 bsh
87 1.1 bsh #options COMPAT_43 # 4.3BSD compatibility.
88 1.5 chris options COMPAT_16 # NetBSD 1.6 compatibility.
89 1.1 bsh #options COMPAT_15 # NetBSD 1.5 compatibility.
90 1.1 bsh #options COMPAT_14 # NetBSD 1.4 compatibility.
91 1.1 bsh #options COMPAT_13 # NetBSD 1.3 compatibility.
92 1.1 bsh #options COMPAT_12 # NetBSD 1.2 compatibility.
93 1.1 bsh #options COMPAT_11 # NetBSD 1.1 compatibility.
94 1.1 bsh #options COMPAT_10 # NetBSD 1.0 compatibility.
95 1.1 bsh #options COMPAT_09 # NetBSD 0.9 compatibility.
96 1.1 bsh #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
97 1.1 bsh
98 1.1 bsh # Shared memory options
99 1.1 bsh
100 1.1 bsh #options SYSVMSG # System V-like message queues
101 1.1 bsh #options SYSVSEM # System V-like semaphores
102 1.1 bsh #options SEMMNI=10 # number of semaphore identifiers
103 1.1 bsh #options SEMMNS=60 # number of semaphores in system
104 1.1 bsh #options SEMUME=10 # max number of undo entries per process
105 1.1 bsh #options SEMMNU=30 # number of undo structures in system
106 1.1 bsh #options SYSVSHM # System V-like memory sharing
107 1.1 bsh #options SHMMAXPGS=1024 # 1024 pages is the default
108 1.1 bsh
109 1.1 bsh # Miscellaneous kernel options
110 1.1 bsh options KTRACE # system call tracing, a la ktrace(1)
111 1.1 bsh #XXX: options IRQSTATS # manage IRQ statistics
112 1.1 bsh #options LKM # loadable kernel modules
113 1.1 bsh #options KMEMSTATS # kernel memory statistics
114 1.1 bsh options SCSIVERBOSE # Verbose SCSI errors
115 1.1 bsh options PCIVERBOSE # Verbose PCI descriptions
116 1.1 bsh options MIIVERBOSE # Verbose MII autoconfuration messages
117 1.2 bsh #options PCI_CONFIG_DUMP # verbosely dump PCI config space
118 1.1 bsh options PCI_NETBSD_CONFIGURE # Do not rely on BIOS/whatever to
119 1.1 bsh # configure PCI devices
120 1.1 bsh #options PCI_CONFIGURE_VERBOSE # Show PCI config information
121 1.1 bsh #options PCI_DEBUG
122 1.1 bsh options DDB_KEYCODE=0x1d # Enter ddb on ^]
123 1.1 bsh options USERCONF # userconf(4) support
124 1.1 bsh #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
125 1.1 bsh
126 1.1 bsh # Development and Debugging options
127 1.1 bsh
128 1.1 bsh #options ARM700BUGTRACK # track the ARM700 swi bug
129 1.1 bsh #options PORTMASTER # Enable PortMaster only options
130 1.1 bsh options DIAGNOSTIC # internal consistency checks
131 1.1 bsh #options PMAP_DEBUG # Enable pmap_debug_level code
132 1.1 bsh #options VERBOSE_INIT_ARM # verbose bootstraping messages
133 1.1 bsh #options IPKDB # remote kernel debugging
134 1.1 bsh #options KGDB
135 1.1 bsh #options DEBUG_KGDB
136 1.1 bsh #options DDB # in-kernel debugger
137 1.1 bsh #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
138 1.4 rearnsha #makeoptions DEBUG="-g" # compile full symbol table
139 1.1 bsh config netbsd root on ? type ?
140 1.1 bsh
141 1.1 bsh # The main bus device
142 1.1 bsh mainbus0 at root
143 1.1 bsh
144 1.1 bsh # The boot cpu
145 1.1 bsh cpu0 at mainbus?
146 1.1 bsh
147 1.1 bsh # Core logic on Samsung S3C2800
148 1.1 bsh ssio0 at mainbus?
149 1.1 bsh
150 1.1 bsh # integrated UART
151 1.1 bsh sscom0 at ssio? index 0
152 1.1 bsh sscom1 at ssio? index 1
153 1.1 bsh options SSCOM0CONSOLE
154 1.1 bsh #options SSCOM1CONSOLE
155 1.1 bsh options KGDB_DEVNAME="\"sscom1\"" # sscom0 or sscom1
156 1.1 bsh options KGDB_DEVRATE=57600
157 1.1 bsh
158 1.1 bsh # PCI bus via internal PCI controller
159 1.1 bsh sspci0 at ssio? # PCI bus
160 1.1 bsh pci0 at sspci0
161 1.1 bsh
162 1.1 bsh # PCI IDE Controllers and Devices
163 1.1 bsh # PCI IDE controllers - see pciide(4) for supported hardware.
164 1.1 bsh # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
165 1.1 bsh # how to set up DMA modes for this chip. This may work, or may cause
166 1.1 bsh # a machine hang with some controllers.
167 1.7 bouyer #pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
168 1.7 bouyer #acardide* at pci? dev ? function ? # Acard IDE controllers
169 1.7 bouyer #aceride* at pci? dev ? function ? # Acer Lab IDE controllers
170 1.7 bouyer #cmdide* at pci? dev ? function ? # CMD tech IDE controllers
171 1.7 bouyer #cypide* at pci? dev ? function ? # Cypress IDE controllers
172 1.7 bouyer #hptide* at pci? dev ? function ? # Triones/HighPoint IDE controllers
173 1.7 bouyer #optiide* at pci? dev ? function ? # Opti IDE controllers
174 1.7 bouyer #piixide* at pci? dev ? function ? # Intel IDE controllers
175 1.7 bouyer #pdcide* at pci? dev ? function ? # Promise IDE controllers
176 1.8 thorpej #satalink* at pci? dev ? function ? # SiI SATALink controllers
177 1.7 bouyer #siside* at pci? dev ? function ? # SiS IDE controllers
178 1.7 bouyer #slide* at pci? dev ? function ? # Symphony Labs IDE controllers
179 1.7 bouyer #viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers
180 1.7 bouyer
181 1.7 bouyer # ATA bus support
182 1.7 bouyer #atabus* at pciide? channel ?
183 1.7 bouyer #atabus* at acardide? channel ?
184 1.7 bouyer #atabus* at aceride? channel ?
185 1.7 bouyer #atabus* at cmdide? channel ?
186 1.7 bouyer #atabus* at cypide? channel ?
187 1.7 bouyer #atabus* at hptide? channel ?
188 1.7 bouyer #atabus* at optiide? channel ?
189 1.7 bouyer #atabus* at piixide? channel ?
190 1.7 bouyer #atabus* at pdcide? channel ?
191 1.8 thorpej #atabus* at satalink? channel ?
192 1.7 bouyer #atabus* at siside? channel ?
193 1.7 bouyer #atabus* at slide? channel ?
194 1.7 bouyer #atabus* at viaide? channel ?
195 1.1 bsh
196 1.6 bouyer # ATA bus support
197 1.6 bouyer #atabus* at pciide? channel ?
198 1.6 bouyer
199 1.1 bsh # IDE drives
200 1.1 bsh # Flags are used only with controllers that support DMA operations
201 1.1 bsh # and mode settings (e.g. some pciide controllers)
202 1.1 bsh # The lowest order four bits (rightmost digit) of the flags define the PIO
203 1.1 bsh # mode to use, the next set of four bits the DMA mode and the third set the
204 1.1 bsh # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
205 1.1 bsh # to use, and the last bit must be 1 for this setting to be used.
206 1.1 bsh # For DMA and UDMA, 0xf (1111) means 'disable'.
207 1.1 bsh # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
208 1.1 bsh # (0xc=1100, 0xa=1010, 0xf=1111)
209 1.1 bsh # 0x0000 means "use whatever the drive claims to support".
210 1.6 bouyer #wd* at atabus? drive ? flags 0x0000 # the drives themselves
211 1.1 bsh
212 1.1 bsh # PCI SCSI Controllers and Buses
213 1.1 bsh #ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI Controllers
214 1.1 bsh #scsibus* at ahc?
215 1.1 bsh
216 1.1 bsh # SCSI devices
217 1.1 bsh
218 1.1 bsh #sd* at scsibus? target ? lun ? # SCSI disk drives
219 1.1 bsh #st* at scsibus? target ? lun ? # SCSI tape drives
220 1.1 bsh #cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
221 1.1 bsh #ch* at scsibus? target ? lun ? # SCSI auto-changers drives
222 1.1 bsh #uk* at scsibus? target ? lun ? # SCSI unknown drives
223 1.1 bsh #ss* at scsibus? target ? lun ? # SCSI scanner
224 1.1 bsh
225 1.1 bsh # PCI network interfaces
226 1.1 bsh #fxp* at pci? dev ? function ? # I82557/I82558 ethernet cards
227 1.1 bsh #ne* at pci? dev ? function ? # NE2000 compat ethernet
228 1.1 bsh #tlp* at pci? dev ? function ? # DECchip 21x4x and clones
229 1.1 bsh sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
230 1.1 bsh
231 1.1 bsh # MII/PHY support
232 1.1 bsh #inphy* at mii? phy ? # Intel 82555 PHYs
233 1.1 bsh #lxtphy* at mii? phy ? # Level One LXT-970 PHYs
234 1.1 bsh ukphy* at mii? phy ? # generic unknown PHYs
235 1.1 bsh
236 1.1 bsh # Pseudo-Devices
237 1.1 bsh
238 1.1 bsh # disk/mass storage pseudo-devices
239 1.1 bsh pseudo-device md 1 # memory disk device (ramdisk)
240 1.1 bsh #pseudo-device vnd 4 # disk-like interface to files
241 1.1 bsh
242 1.1 bsh # network pseudo-devices
243 1.1 bsh #pseudo-device bpfilter 4 # Berkeley packet filter
244 1.1 bsh #pseudo-device bridge # simple inter-network bridging
245 1.1 bsh pseudo-device loop # network loopback
246 1.1 bsh
247 1.1 bsh # miscellaneous pseudo-devices
248 1.1 bsh pseudo-device pty # pseudo-terminals
249 1.1 bsh pseudo-device rnd # /dev/random and in-kernel generator
250 1.1 bsh pseudo-device clockctl # user control of clock subsystem
251 1.3 thorpej #pseudo-device ksyms # /dev/ksyms
252