SMDK2800 revision 1.16 1 # $NetBSD: SMDK2800,v 1.16 2004/09/04 23:29:47 manu Exp $
2 #
3 # SMDK2800 -- Samsung's S3C2800 evaluation board.
4 #
5
6 include "arch/evbarm/conf/std.smdk2800"
7
8 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
9
10 # Enable the hooks used for initializing the root memory-disk.
11 #options MEMORY_DISK_HOOKS
12 #options MEMORY_DISK_DYNAMIC
13 #options MEMORY_DISK_IS_ROOT # force root on memory disk
14 #options MEMORY_DISK_SERVER=0 # no userspace memory disk support
15 #options MEMORY_DISK_ROOT_SIZE=4096 # size of memory disk, in blocks
16 #options MEMORY_DISK_ROOT_SIZE=2880 # 1.44M, same as a floppy
17
18 # estimated number of users
19
20 maxusers 32
21
22 # Standard system options
23
24 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
25 options NTP # NTP phase/frequency locked loop
26
27 # CPU options
28
29 options CPU_ARM9 # Support the ARM9TDMI core
30 makeoptions CPUFLAGS="-march=armv4"
31
32 options S3C2XX0_XTAL_CLK=6000000 # 6MHz external Xtal
33
34 # Architecture options
35
36 # File systems
37
38 file-system FFS # UFS
39 #file-system LFS # log-structured file system
40 file-system MFS # memory file system
41 file-system NFS # Network file system
42 #file-system ADOSFS # AmigaDOS-compatible file system
43 #file-system EXT2FS # second extended file system (linux)
44 #file-system CD9660 # ISO 9660 + Rock Ridge file system
45 #file-system MSDOSFS # MS-DOS file system
46 #file-system FDESC # /dev/fd
47 file-system KERNFS # /kern
48 #file-system NULLFS # loopback file system
49 #file-system PORTAL # portal filesystem (still experimental)
50 file-system PROCFS # /proc
51 #file-system UMAPFS # NULLFS + uid and gid remapping
52 #file-system UNION # union file system
53
54 # File system options
55 #options QUOTA # UFS quotas
56 #options FFS_EI # FFS Endian Independant support
57 #options NFSSERVER
58 options SOFTDEP
59
60 # Networking options
61
62 #options GATEWAY # packet forwarding
63 options INET # IP + ICMP + TCP + UDP
64 options INET6 # IPV6
65 #options IPSEC # IP security
66 #options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
67 #options IPSEC_DEBUG # debug for IP security
68 #options MROUTING # IP multicast routing
69 #options PIM # Protocol Independent Multicast
70 #options NS # XNS
71 #options NSIP # XNS tunneling over IP
72 #options ISO,TPIP # OSI
73 #options EON # OSI tunneling over IP
74 #options CCITT,LLC,HDLC # X.25
75 #options NETATALK # AppleTalk networking
76 #options PFIL_HOOKS # pfil(9) packet filter hooks
77 #options PPP_BSDCOMP # BSD-Compress compression support for PPP
78 #options PPP_DEFLATE # Deflate compression support for PPP
79 #options PPP_FILTER # Active filter support for PPP (requires bpf)
80 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
81
82 options NFS_BOOT_BOOTP
83 options NFS_BOOT_DHCP
84 options NFS_BOOT_BOOTPARAM
85
86 # Compatibility options
87
88 #options COMPAT_43 # 4.3BSD compatibility.
89 options COMPAT_16 # NetBSD 1.6 compatibility.
90 #options COMPAT_15 # NetBSD 1.5 compatibility.
91 #options COMPAT_14 # NetBSD 1.4 compatibility.
92 #options COMPAT_13 # NetBSD 1.3 compatibility.
93 #options COMPAT_12 # NetBSD 1.2 compatibility.
94 #options COMPAT_11 # NetBSD 1.1 compatibility.
95 #options COMPAT_10 # NetBSD 1.0 compatibility.
96 #options COMPAT_09 # NetBSD 0.9 compatibility.
97 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
98
99 # Shared memory options
100
101 #options SYSVMSG # System V-like message queues
102 #options SYSVSEM # System V-like semaphores
103 #options SEMMNI=10 # number of semaphore identifiers
104 #options SEMMNS=60 # number of semaphores in system
105 #options SEMUME=10 # max number of undo entries per process
106 #options SEMMNU=30 # number of undo structures in system
107 #options SYSVSHM # System V-like memory sharing
108 #options SHMMAXPGS=1024 # 1024 pages is the default
109
110 # Miscellaneous kernel options
111 options KTRACE # system call tracing, a la ktrace(1)
112 #XXX: options IRQSTATS # manage IRQ statistics
113 #options LKM # loadable kernel modules
114 #options KMEMSTATS # kernel memory statistics
115 options SCSIVERBOSE # Verbose SCSI errors
116 options PCIVERBOSE # Verbose PCI descriptions
117 options MIIVERBOSE # Verbose MII autoconfuration messages
118 #options PCI_CONFIG_DUMP # verbosely dump PCI config space
119 options PCI_NETBSD_CONFIGURE # Do not rely on BIOS/whatever to
120 # configure PCI devices
121 #options PCI_CONFIGURE_VERBOSE # Show PCI config information
122 #options PCI_DEBUG
123 options DDB_KEYCODE=0x1d # Enter ddb on ^]
124 options USERCONF # userconf(4) support
125 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
126 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
127
128 # Development and Debugging options
129
130 #options ARM700BUGTRACK # track the ARM700 swi bug
131 #options PORTMASTER # Enable PortMaster only options
132 options DIAGNOSTIC # internal consistency checks
133 #options PMAP_DEBUG # Enable pmap_debug_level code
134 #options VERBOSE_INIT_ARM # verbose bootstraping messages
135 #options IPKDB # remote kernel debugging
136 #options KGDB
137 #options DEBUG_KGDB
138 #options DDB # in-kernel debugger
139 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
140 #makeoptions DEBUG="-g" # compile full symbol table
141 config netbsd root on ? type ?
142
143 # The main bus device
144 mainbus0 at root
145
146 # The boot CPU
147 cpu0 at mainbus?
148
149 # Core logic on Samsung S3C2800
150 ssio0 at mainbus?
151
152 # integrated UART
153 sscom0 at ssio? index 0
154 sscom1 at ssio? index 1
155 options SSCOM0CONSOLE
156 #options SSCOM1CONSOLE
157 options KGDB_DEVNAME="\"sscom1\"" # sscom0 or sscom1
158 options KGDB_DEVRATE=57600
159
160 # PCI bus via internal PCI controller
161 sspci0 at ssio? # PCI bus
162 pci0 at sspci0
163
164 # PCI IDE Controllers and Devices
165 # PCI IDE controllers - see pciide(4) for supported hardware.
166 # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
167 # how to set up DMA modes for this chip. This may work, or may cause
168 # a machine hang with some controllers.
169 #pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
170 #artsata* at pci? dev ? function ? # Intel i31244 SATA controller
171 #cmdide* at pci? dev ? function ? # CMD tech IDE controllers
172 #hptide* at pci? dev ? function ? # Triones/HighPoint IDE controllers
173 #pdcide* at pci? dev ? function ? # Promise IDE controllers
174 #satalink* at pci? dev ? function ? # SiI SATALink controllers
175
176 # ATA bus support
177 #atabus* at ata? channel ?
178
179 # IDE drives
180 # Flags are used only with controllers that support DMA operations
181 # and mode settings (e.g. some pciide controllers)
182 # The lowest order four bits (rightmost digit) of the flags define the PIO
183 # mode to use, the next set of four bits the DMA mode and the third set the
184 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
185 # to use, and the last bit must be 1 for this setting to be used.
186 # For DMA and UDMA, 0xf (1111) means 'disable'.
187 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
188 # (0xc=1100, 0xa=1010, 0xf=1111)
189 # 0x0000 means "use whatever the drive claims to support".
190 #wd* at atabus? drive ? flags 0x0000 # the drives themselves
191
192 # PCI SCSI Controllers and Buses
193 #ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI Controllers
194 #scsibus* at ahc?
195
196 # SCSI devices
197
198 #sd* at scsibus? target ? lun ? # SCSI disk drives
199 #st* at scsibus? target ? lun ? # SCSI tape drives
200 #cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
201 #ch* at scsibus? target ? lun ? # SCSI auto-changers drives
202 #uk* at scsibus? target ? lun ? # SCSI unknown drives
203 #ss* at scsibus? target ? lun ? # SCSI scanner
204
205 # PCI network interfaces
206 #fxp* at pci? dev ? function ? # I82557/I82558 ethernet cards
207 #ne* at pci? dev ? function ? # NE2000 compat ethernet
208 #tlp* at pci? dev ? function ? # DECchip 21x4x and clones
209 sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
210
211 # MII/PHY support
212 #inphy* at mii? phy ? # Intel 82555 PHYs
213 #lxtphy* at mii? phy ? # Level One LXT-970 PHYs
214 ukphy* at mii? phy ? # generic unknown PHYs
215
216 # Pseudo-Devices
217
218 # disk/mass storage pseudo-devices
219 pseudo-device md 1 # memory disk device (ramdisk)
220 #pseudo-device vnd 4 # disk-like interface to files
221
222 # network pseudo-devices
223 #pseudo-device bpfilter 4 # Berkeley packet filter
224 #pseudo-device bridge # simple inter-network bridging
225 pseudo-device loop # network loopback
226
227 # miscellaneous pseudo-devices
228 pseudo-device pty # pseudo-terminals
229 pseudo-device rnd # /dev/random and in-kernel generator
230 pseudo-device clockctl # user control of clock subsystem
231 #pseudo-device ksyms # /dev/ksyms
232