SMDK2800 revision 1.2 1 # $NetBSD: SMDK2800,v 1.2 2003/05/16 08:11:36 bsh Exp $
2 #
3 # SMDK2800 -- Samsung's S3C2800 evaluation board.
4 #
5
6 include "arch/evbarm/conf/std.smdk2800"
7
8 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
9
10 # Enable the hooks used for initializing the root memory-disk.
11 #options MEMORY_DISK_HOOKS
12 #options MEMORY_DISK_DYNAMIC
13 #options MEMORY_DISK_IS_ROOT # force root on memory disk
14 #options MEMORY_DISK_SERVER=0 # no userspace memory disk support
15 #options MEMORY_DISK_ROOT_SIZE=4096 # size of memory disk, in blocks
16 #options MEMORY_DISK_ROOT_SIZE=2880 # 1.44M, same as a floppy
17
18 # estimated number of users
19
20 maxusers 32
21
22 # Standard system options
23
24 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
25 options NTP # NTP phase/frequency locked loop
26
27 # CPU options
28
29 options CPU_ARM9 # Support the ARM9TDMI core
30 makeoptions COPTS="-O2 -march=armv4"
31
32 options S3C2XX0_XTAL_CLK=6000000 # 6MHz external Xtal
33
34 # Architecture options
35
36 # File systems
37
38 file-system FFS # UFS
39 #file-system LFS # log-structured file system
40 file-system MFS # memory file system
41 file-system NFS # Network file system
42 #file-system ADOSFS # AmigaDOS-compatible file system
43 #file-system EXT2FS # second extended file system (linux)
44 #file-system CD9660 # ISO 9660 + Rock Ridge file system
45 #file-system MSDOSFS # MS-DOS file system
46 #file-system FDESC # /dev/fd
47 file-system KERNFS # /kern
48 #file-system NULLFS # loopback file system
49 #file-system PORTAL # portal filesystem (still experimental)
50 file-system PROCFS # /proc
51 #file-system UMAPFS # NULLFS + uid and gid remapping
52 #file-system UNION # union file system
53
54 # File system options
55 #options QUOTA # UFS quotas
56 #options FFS_EI # FFS Endian Independant support
57 #options NFSSERVER
58 options SOFTDEP
59
60 # Networking options
61
62 #options GATEWAY # packet forwarding
63 options INET # IP + ICMP + TCP + UDP
64 options INET6 # IPV6
65 #options IPSEC # IP security
66 #options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
67 #options IPSEC_DEBUG # debug for IP security
68 #options MROUTING # IP multicast routing
69 #options NS # XNS
70 #options NSIP # XNS tunneling over IP
71 #options ISO,TPIP # OSI
72 #options EON # OSI tunneling over IP
73 #options CCITT,LLC,HDLC # X.25
74 #options NETATALK # AppleTalk networking
75 #options PFIL_HOOKS # pfil(9) packet filter hooks
76 #options PPP_BSDCOMP # BSD-Compress compression support for PPP
77 #options PPP_DEFLATE # Deflate compression support for PPP
78 #options PPP_FILTER # Active filter support for PPP (requires bpf)
79 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
80
81 options NFS_BOOT_BOOTP
82 options NFS_BOOT_DHCP
83 options NFS_BOOT_BOOTPARAM
84
85 # Compatibility options
86
87 #options COMPAT_43 # 4.3BSD compatibility.
88 #options COMPAT_15 # NetBSD 1.5 compatibility.
89 #options COMPAT_14 # NetBSD 1.4 compatibility.
90 #options COMPAT_13 # NetBSD 1.3 compatibility.
91 #options COMPAT_12 # NetBSD 1.2 compatibility.
92 #options COMPAT_11 # NetBSD 1.1 compatibility.
93 #options COMPAT_10 # NetBSD 1.0 compatibility.
94 #options COMPAT_09 # NetBSD 0.9 compatibility.
95 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
96
97 # Shared memory options
98
99 #options SYSVMSG # System V-like message queues
100 #options SYSVSEM # System V-like semaphores
101 #options SEMMNI=10 # number of semaphore identifiers
102 #options SEMMNS=60 # number of semaphores in system
103 #options SEMUME=10 # max number of undo entries per process
104 #options SEMMNU=30 # number of undo structures in system
105 #options SYSVSHM # System V-like memory sharing
106 #options SHMMAXPGS=1024 # 1024 pages is the default
107
108 # Miscellaneous kernel options
109 options KTRACE # system call tracing, a la ktrace(1)
110 #XXX: options IRQSTATS # manage IRQ statistics
111 #options LKM # loadable kernel modules
112 #options KMEMSTATS # kernel memory statistics
113 options SCSIVERBOSE # Verbose SCSI errors
114 options PCIVERBOSE # Verbose PCI descriptions
115 options MIIVERBOSE # Verbose MII autoconfuration messages
116 #options PCI_CONFIG_DUMP # verbosely dump PCI config space
117 options PCI_NETBSD_CONFIGURE # Do not rely on BIOS/whatever to
118 # configure PCI devices
119 #options PCI_CONFIGURE_VERBOSE # Show PCI config information
120 #options PCI_DEBUG
121 options DDB_KEYCODE=0x1d # Enter ddb on ^]
122 options USERCONF # userconf(4) support
123 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
124
125 # Development and Debugging options
126
127 #options ARM700BUGTRACK # track the ARM700 swi bug
128 #options PORTMASTER # Enable PortMaster only options
129 options DIAGNOSTIC # internal consistency checks
130 #options PMAP_DEBUG # Enable pmap_debug_level code
131 #options VERBOSE_INIT_ARM # verbose bootstraping messages
132 #options IPKDB # remote kernel debugging
133 #options KGDB
134 #options DEBUG_KGDB
135 #options DDB # in-kernel debugger
136 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
137 makeoptions DEBUG="-g" # compile full symbol table
138 config netbsd root on ? type ?
139
140 # The main bus device
141 mainbus0 at root
142
143 # The boot cpu
144 cpu0 at mainbus?
145
146 # Core logic on Samsung S3C2800
147 ssio0 at mainbus?
148
149 # integrated UART
150 sscom0 at ssio? index 0
151 sscom1 at ssio? index 1
152 options SSCOM0CONSOLE
153 #options SSCOM1CONSOLE
154 options KGDB_DEVNAME="\"sscom1\"" # sscom0 or sscom1
155 options KGDB_DEVRATE=57600
156
157 # PCI bus via internal PCI controller
158 sspci0 at ssio? # PCI bus
159 pci0 at sspci0
160
161 # PCI IDE Controllers and Devices
162 # PCI IDE controllers - see pciide(4) for supported hardware.
163 # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
164 # how to set up DMA modes for this chip. This may work, or may cause
165 # a machine hang with some controllers.
166 #pciide* at pci? dev ? function ? flags 0x0000
167
168 # IDE drives
169 # Flags are used only with controllers that support DMA operations
170 # and mode settings (e.g. some pciide controllers)
171 # The lowest order four bits (rightmost digit) of the flags define the PIO
172 # mode to use, the next set of four bits the DMA mode and the third set the
173 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
174 # to use, and the last bit must be 1 for this setting to be used.
175 # For DMA and UDMA, 0xf (1111) means 'disable'.
176 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
177 # (0xc=1100, 0xa=1010, 0xf=1111)
178 # 0x0000 means "use whatever the drive claims to support".
179 #wd* at pciide? channel ? drive ? flags 0x0000 # the drives themselves
180
181 # PCI SCSI Controllers and Buses
182 #ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI Controllers
183 #scsibus* at ahc?
184
185 # SCSI devices
186
187 #sd* at scsibus? target ? lun ? # SCSI disk drives
188 #st* at scsibus? target ? lun ? # SCSI tape drives
189 #cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
190 #ch* at scsibus? target ? lun ? # SCSI auto-changers drives
191 #uk* at scsibus? target ? lun ? # SCSI unknown drives
192 #ss* at scsibus? target ? lun ? # SCSI scanner
193
194 # PCI network interfaces
195 #fxp* at pci? dev ? function ? # I82557/I82558 ethernet cards
196 #ne* at pci? dev ? function ? # NE2000 compat ethernet
197 #tlp* at pci? dev ? function ? # DECchip 21x4x and clones
198 sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
199
200 # MII/PHY support
201 #inphy* at mii? phy ? # Intel 82555 PHYs
202 #lxtphy* at mii? phy ? # Level One LXT-970 PHYs
203 ukphy* at mii? phy ? # generic unknown PHYs
204
205 # Pseudo-Devices
206
207 # disk/mass storage pseudo-devices
208 pseudo-device md 1 # memory disk device (ramdisk)
209 #pseudo-device vnd 4 # disk-like interface to files
210
211 # network pseudo-devices
212 #pseudo-device bpfilter 4 # Berkeley packet filter
213 #pseudo-device bridge # simple inter-network bridging
214 pseudo-device loop # network loopback
215
216 # miscellaneous pseudo-devices
217 pseudo-device pty # pseudo-terminals
218 pseudo-device rnd # /dev/random and in-kernel generator
219 pseudo-device clockctl # user control of clock subsystem
220