Home | History | Annotate | Line # | Download | only in conf
SMDK2800 revision 1.52.2.1
      1 #	$NetBSD: SMDK2800,v 1.52.2.1 2013/08/28 23:59:14 rmind Exp $
      2 #
      3 #	SMDK2800 -- Samsung's S3C2800 evaluation board.
      4 #
      5 
      6 include	"arch/evbarm/conf/std.smdk2800"
      7 
      8 #options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
      9 
     10 # Enable the hooks used for initializing the root memory-disk.
     11 #options 	MEMORY_DISK_HOOKS
     12 #options 	MEMORY_DISK_DYNAMIC
     13 #options 	MEMORY_DISK_IS_ROOT	# force root on memory disk
     14 #options 	MEMORY_DISK_SERVER=0	# no userspace memory disk support
     15 #options 	MEMORY_DISK_ROOT_SIZE=4096	# size of memory disk, in blocks
     16 #options 	MEMORY_DISK_ROOT_SIZE=2880	# 1.44M, same as a floppy
     17 
     18 # estimated number of users
     19 
     20 maxusers	32
     21 
     22 # Standard system options
     23 
     24 options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
     25 options 	NTP		# NTP phase/frequency locked loop
     26 
     27 # CPU options
     28 
     29 options 	CPU_ARM9	# Support the ARM9TDMI core
     30 makeoptions	CPUFLAGS="-march=armv4"
     31 
     32 options 	S3C2XX0_XTAL_CLK=6000000	# 6MHz external Xtal
     33 
     34 # Architecture options
     35 
     36 # File systems
     37 
     38 file-system	FFS		# UFS
     39 #file-system	LFS		# log-structured file system
     40 file-system	MFS		# memory file system
     41 file-system	NFS		# Network file system
     42 #file-system 	ADOSFS		# AmigaDOS-compatible file system
     43 #file-system 	EXT2FS		# second extended file system (linux)
     44 #file-system	CD9660		# ISO 9660 + Rock Ridge file system
     45 #file-system	MSDOSFS		# MS-DOS file system
     46 #file-system	FDESC		# /dev/fd
     47 file-system	KERNFS		# /kern
     48 #file-system	NULLFS		# loopback file system
     49 file-system	PROCFS		# /proc
     50 #file-system	PUFFS		# Userspace file systems (e.g. ntfs-3g & sshfs)
     51 #file-system	UMAPFS		# NULLFS + uid and gid remapping
     52 #file-system	UNION		# union file system
     53 file-system	PTYFS		# /dev/pts/N support
     54 
     55 # File system options
     56 #options 	QUOTA		# legacy UFS quotas
     57 #options 	QUOTA2		# new, in-filesystem UFS quotas
     58 #options 	FFS_EI		# FFS Endian Independent support
     59 #options 	NFSSERVER
     60 options 	WAPBL		# File system journaling support
     61 #options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
     62 
     63 # Networking options
     64 
     65 #options 	GATEWAY		# packet forwarding
     66 options 	INET		# IP + ICMP + TCP + UDP
     67 options 	INET6		# IPV6
     68 #options 	IPSEC		# IP security
     69 #options 	IPSEC_DEBUG	# debug for IP security
     70 #options 	MROUTING	# IP multicast routing
     71 #options 	PIM		# Protocol Independent Multicast
     72 #options 	NETATALK	# AppleTalk networking
     73 #options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
     74 #options 	PPP_DEFLATE	# Deflate compression support for PPP
     75 #options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
     76 #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
     77 
     78 options 	NFS_BOOT_BOOTP
     79 options 	NFS_BOOT_DHCP
     80 options 	NFS_BOOT_BOOTPARAM
     81 
     82 # Compatibility options
     83 
     84 #options 	COMPAT_43	# 4.3BSD compatibility.
     85 options 	COMPAT_60	# NetBSD 6.0 compatibility.
     86 options 	COMPAT_50	# NetBSD 5.0 compatibility.
     87 options 	COMPAT_40	# NetBSD 4.0 compatibility.
     88 options 	COMPAT_30	# NetBSD 3.0 compatibility.
     89 options 	COMPAT_20	# NetBSD 2.0 compatibility.
     90 options 	COMPAT_16	# NetBSD 1.6 compatibility.
     91 #options 	COMPAT_15	# NetBSD 1.5 compatibility.
     92 #options 	COMPAT_14	# NetBSD 1.4 compatibility.
     93 #options 	COMPAT_13	# NetBSD 1.3 compatibility.
     94 #options 	COMPAT_12	# NetBSD 1.2 compatibility.
     95 #options 	COMPAT_11	# NetBSD 1.1 compatibility.
     96 #options 	COMPAT_10	# NetBSD 1.0 compatibility.
     97 #options 	COMPAT_09	# NetBSD 0.9 compatibility.
     98 #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
     99 options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
    100 
    101 # Shared memory options
    102 
    103 #options 	SYSVMSG		# System V-like message queues
    104 #options 	SYSVSEM		# System V-like semaphores
    105 #options 	SYSVSHM		# System V-like memory sharing
    106 
    107 # Miscellaneous kernel options
    108 options 	KTRACE		# system call tracing, a la ktrace(1)
    109 #XXX: options 	IRQSTATS	# manage IRQ statistics
    110 #options 	KMEMSTATS	# kernel memory statistics
    111 options 	SCSIVERBOSE	# Verbose SCSI errors
    112 options 	PCIVERBOSE	# Verbose PCI descriptions
    113 options 	MIIVERBOSE	# Verbose MII autoconfuration messages
    114 #options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
    115 options 	PCI_NETBSD_CONFIGURE	# Do not rely on BIOS/whatever to
    116 					# configure PCI devices
    117 #options 	PCI_CONFIGURE_VERBOSE	# Show PCI config information
    118 #options 	PCI_DEBUG
    119 options 	DDB_KEYCODE=0x1d	# Enter ddb on ^]
    120 options 	USERCONF	# userconf(4) support
    121 #options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
    122 #options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
    123 
    124 # Development and Debugging options
    125 
    126 #options 	ARM700BUGTRACK	# track the ARM700 swi bug
    127 #options 	PORTMASTER	# Enable PortMaster only options
    128 options 	DIAGNOSTIC	# internal consistency checks
    129 #options 	PMAP_DEBUG	# Enable pmap_debug_level code
    130 #options 	VERBOSE_INIT_ARM # verbose bootstraping messages
    131 #options 	KGDB
    132 #options  	DEBUG_KGDB
    133 #options 	DDB		# in-kernel debugger
    134 #options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
    135 #makeoptions	DEBUG="-g"	# compile full symbol table
    136 config		netbsd	root on ? type ?
    137 
    138 # The main bus device
    139 mainbus0	at root
    140 
    141 # The boot CPU
    142 cpu0		at mainbus?
    143 
    144 # Core logic on Samsung S3C2800
    145 ssio0	at mainbus?
    146 
    147 # integrated UART
    148 sscom0	at ssio? index 0
    149 sscom1	at ssio? index 1
    150 options 	SSCOM0CONSOLE
    151 #options 	SSCOM1CONSOLE
    152 options KGDB_DEVNAME="\"sscom1\""   # sscom0 or sscom1
    153 options KGDB_DEVRATE=57600
    154 
    155 # PCI bus via internal PCI controller
    156 sspci0		at ssio?			# PCI bus
    157 pci0	at sspci0
    158 
    159 # PCI IDE Controllers and Devices
    160 # PCI IDE controllers - see pciide(4) for supported hardware.
    161 # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
    162 # how to set up DMA modes for this chip. This may work, or may cause
    163 # a machine hang with some controllers.
    164 #pciide* 	at pci? dev ? function ? flags 0x0000	# GENERIC pciide driver
    165 #artsata*	at pci? dev ? function ?	# Intel i31244 SATA controller
    166 #cmdide* 	at pci? dev ? function ?	# CMD tech IDE controllers
    167 #hptide* 	at pci? dev ? function ?	# Triones/HighPoint IDE controllers
    168 #pdcide* 	at pci? dev ? function ?	# Promise IDE controllers
    169 #pdcsata* 	at pci? dev ? function ?	# Promise SATA150 controllers
    170 #satalink*	at pci? dev ? function ?	# SiI SATALink controllers
    171 
    172 # ATA bus support
    173 #atabus* 	at ata? channel ?
    174 
    175 # IDE drives
    176 # Flags are used only with controllers that support DMA operations
    177 # and mode settings (e.g. some pciide controllers)
    178 # The lowest order four bits (rightmost digit) of the flags define the PIO
    179 # mode to use, the next set of four bits the DMA mode and the third set the
    180 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
    181 # to use, and the last bit must be 1 for this setting to be used.
    182 # For DMA and UDMA, 0xf (1111) means 'disable'.
    183 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
    184 # (0xc=1100, 0xa=1010, 0xf=1111)
    185 # 0x0000 means "use whatever the drive claims to support".
    186 #wd*		at atabus? drive ? flags 0x0000	# the drives themselves
    187 
    188 # PCI SCSI Controllers and Buses
    189 #ahc*		at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI Controllers
    190 #scsibus*	at ahc?
    191 
    192 # SCSI devices
    193 
    194 #sd*		at scsibus? target ? lun ?	# SCSI disk drives
    195 #st*		at scsibus? target ? lun ?	# SCSI tape drives
    196 #cd*		at scsibus? target ? lun ?	# SCSI CD-ROM drives
    197 #ch*		at scsibus? target ? lun ?	# SCSI auto-changers drives
    198 #uk*		at scsibus? target ? lun ?	# SCSI unknown drives
    199 #ss*		at scsibus? target ? lun ?	# SCSI scanner
    200 
    201 # PCI network interfaces
    202 #fxp*		at pci? dev ? function ?	# I82557/I82558 ethernet cards
    203 #ne*		at pci? dev ? function ?	# NE2000 compat ethernet
    204 #tlp*		at pci? dev ? function ?	# DECchip 21x4x and clones
    205 sip*	at pci? dev ? function ?	# SiS 900/DP83815 Ethernet
    206 
    207 # MII/PHY support
    208 #inphy*		at mii? phy ?			# Intel 82555 PHYs
    209 #lxtphy*		at mii? phy ?			# Level One LXT-970 PHYs
    210 ukphy*		at mii? phy ?			# generic unknown PHYs
    211 
    212 # Pseudo-Devices
    213 
    214 # disk/mass storage pseudo-devices
    215 #pseudo-device	md			# memory disk device (ramdisk)
    216 #pseudo-device	vnd			# disk-like interface to files
    217 #pseudo-device	fss			# file system snapshot device
    218 #pseudo-device	putter			# for puffs and pud
    219 
    220 # network pseudo-devices
    221 pseudo-device	bpfilter		# Berkeley packet filter
    222 pseudo-device	ipfilter		# IP filter (firewall) and NAT
    223 pseudo-device	loop			# network loopback
    224 #pseudo-device	kttcp			# network loopback
    225 #pseudo-device	ppp			# Point-to-Point Protocol
    226 #pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    227 #pseudo-device	sl			# Serial Line IP
    228 #pseudo-device	strip			# Starmode Radio IP (Metricom)
    229 #pseudo-device	irframetty		# IrDA frame line discipline
    230 #pseudo-device	tap			# virtual Ethernet
    231 #pseudo-device	tun			# network tunneling over tty
    232 #pseudo-device	gre			# generic L3 over IP tunnel
    233 #pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
    234 #pseudo-device	faith			# IPv[46] tcp relay translation i/f
    235 #pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
    236 #pseudo-device	vlan			# IEEE 802.1q encapsulation
    237 #pseudo-device	bridge			# simple inter-network bridging
    238 #options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
    239 #pseudo-device	pf			# PF packet filter
    240 #pseudo-device	pflog			# PF log if
    241 
    242 # miscellaneous pseudo-devices
    243 pseudo-device	pty			# pseudo-terminals
    244 pseudo-device	clockctl		# user control of clock subsystem
    245 
    246 # wscons pseudo-devices
    247 #pseudo-device	wsmux			# mouse & keyboard multiplexor
    248 #pseudo-device	wsfont
    249 pseudo-device	ksyms			# /dev/ksyms
    250