xref: /src/sys/arch/evbarm/conf/VIPER

#	$NetBSD: VIPER,v 1.11.38.1 2008/02/18 21:04:26 mjf Exp $
#
#	Arcom Viper
#

include "arch/evbarm/conf/std.viper"

#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
#options 	MSGBUFSIZE=65536
#options 	KSTACK_CHECK_MAGIC

# estimated number of users
maxusers	32

# Standard system options

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
options 	NTP		# NTP phase/frequency locked loop

# CPU options

options 	CPU_XSCALE_PXA250 # XScale PXA255
makeoptions	CPUFLAGS="-mcpu=xscale"
#options 	CPU_XSCALE_CCLKCFG=xyz

# File systems

file-system	FFS		# UFS
#file-system	LFS		# log-structured file system
file-system	MFS		# memory file system
file-system	NFS		# Network file system
#file-system 	ADOSFS		# AmigaDOS-compatible file system
file-system 	EXT2FS		# second extended file system (linux)
#file-system	CD9660		# ISO 9660 + Rock Ridge file system
file-system	MSDOSFS		# MS-DOS file system
#file-system	FDESC		# /dev/fd
#file-system    FILECORE        # Acorn filecore file system
file-system	KERNFS		# /kern
file-system	NULLFS		# loopback file system
#file-system	PORTAL		# portal filesystem (still experimental)
file-system	PROCFS		# /proc
#file-system	UMAPFS		# NULLFS + uid and gid remapping
file-system	UNION		# union file system
file-system	PTYFS		# /dev/pts/N support

# File system options
#options 	QUOTA		# UFS quotas
#options 	FFS_EI		# FFS Endian Independant support
options 	NFSSERVER
options 	SOFTDEP

# Networking options

#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/ IPSEC)
#options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
#options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
#options 	NETATALK	# AppleTalk networking
#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
#options 	PPP_DEFLATE	# Deflate compression support for PPP
#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

options 	NFS_BOOT_DHCP
options 	NFS_BOOT_BOOTPARAM
options 	NFS_BOOT_RWSIZE=1024

# Compatibility options

#options 	COMPAT_LINUX
#options 	COMPAT_43	# 4.3BSD compatibility.
options 	COMPAT_30	# NetBSD 3.0 compatibility.
#options 	COMPAT_20	# NetBSD 2.0
#options 	COMPAT_16	# NetBSD 1.6 compatibility.
#options 	COMPAT_15	# NetBSD 1.5 compatibility.
#options 	COMPAT_14	# NetBSD 1.4 compatibility.
#options 	COMPAT_13	# NetBSD 1.3 compatibility.
#options 	COMPAT_12	# NetBSD 1.2 compatibility.
#options 	COMPAT_11	# NetBSD 1.1 compatibility.
#options 	COMPAT_10	# NetBSD 1.0 compatibility.
#options 	COMPAT_09	# NetBSD 0.9 compatibility.
#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.

# Shared memory options

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
options 	SEMMNI=10	# number of semaphore identifiers
options 	SEMMNS=60	# number of semaphores in system
options 	SEMUME=10	# max number of undo entries per process
options 	SEMMNU=30	# number of undo structures in system
options 	SYSVSHM		# System V-like memory sharing
options 	SHMMAXPGS=1024	# 1024 pages is the default

# Device options

#options 	MEMORY_DISK_HOOKS	# boottime setup of ramdisk
#options 	MEMORY_DISK_ROOT_SIZE=3400	# Size in blocks
#options 	MEMORY_DISK_IS_ROOT	# use memory disk as root

# Console options.  The default console is speed is 115200 bps.
#options 	CONSPEED=9600		# Console speed

# Miscellaneous kernel options
options 	KTRACE		# system call tracing, a la ktrace(1)
options 	IRQSTATS	# manage IRQ statistics
#options 	LKM		# loadable kernel modules
#options 	KMEMSTATS	# kernel memory statistics
#options 	SCSIVERBOSE	# Verbose SCSI errors
#options 	PCIVERBOSE	# Verbose PCI descriptions
#options 	MIIVERBOSE	# Verbose MII autoconfuration messages
#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
#options 	DDB_KEYCODE=0x40
#options 	USERCONF	# userconf(4) support
#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)

# Development and Debugging options

#options 	PERFCTRS	# performance counters
options 	DIAGNOSTIC	# internally consistency checks
#options 	DEBUG
#options 	PMAP_DEBUG	# Enable pmap_debug_level code
#options 	VERBOSE_INIT_ARM # verbose bootstraping messages
options 	DDB		# in-kernel debugger
options		DDB_ONPANIC=1
options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
#makeoptions	DEBUG="-g"	# compile full symbol table
options 	SYMTAB_SPACE=450000

##options 	PMAP_INCLUDE_PTE_SYNC
##options 	LOCKDEBUG

config		netbsd		root on ? type ?

# The main bus device
mainbus0	at root

# The boot CPU
cpu0		at mainbus?

# peripherals
pxaip0		at mainbus0

# interrupt controller & gpio pins
pxaintc0	at pxaip0
pxagpio0	at pxaip0

# serial ports
options 	COM_PXA2X0
options 	FFUARTCONSOLE
com0	at pxaip0 addr 0x40100000 intr 22  # FFUART
com1	at pxaip0 addr 0x40200000 intr 21  # BTUART
com2	at pxaip0 addr 0x40700000 intr 20

# these two are not hanging off of pxaip, not really tested either
#com3	at pxaip0 addr 0x14300000	# COM5
#com4	at pxaip0 addr 0x14300010	# COM4

# SMC91C111 ethernet
sm0	at pxaip0 addr 0x08000300 intr 0

# MII/PHY support
sqphy*	at mii? phy ?			# Seeq 80220/80221/80223 PHYs

# Pseudo-Devices

# disk/mass storage pseudo-devices
#pseudo-device	md		1	# memory disk device (ramdisk)
pseudo-device	vnd			# disk-like interface to files
#pseudo-device	fss		4	# file system snapshot device

# network pseudo-devices
pseudo-device	bpfilter		# Berkeley packet filter
pseudo-device	loop			# network loopback
pseudo-device	kttcp			# network loopback

# miscellaneous pseudo-devices
pseudo-device	pty			# pseudo-terminals
pseudo-device	rnd			# /dev/random and in-kernel generator
#options	RND_COM
pseudo-device	clockctl		# user control of clock subsystem
pseudo-device	ksyms			# /dev/ksyms

# data mover pseudo-devices
#pseudo-device	swdmover		# softare dmover(9) back-end
#pseudo-device	dmoverio		# /dev/dmover dmover(9) interface