VIPER revision 1.31
1#	$NetBSD: VIPER,v 1.31 2013/06/05 23:08:01 christos Exp $
2#
3#	Arcom Viper
4#
5
6include "arch/evbarm/conf/std.viper"
7
8#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
9#options 	MSGBUFSIZE=65536
10#options 	KSTACK_CHECK_MAGIC
11
12# estimated number of users
13maxusers	32
14
15# Standard system options
16
17options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
18options 	NTP		# NTP phase/frequency locked loop
19
20# CPU options
21
22options 	CPU_XSCALE_PXA250 # XScale PXA255
23makeoptions	CPUFLAGS="-mcpu=xscale"
24#options 	CPU_XSCALE_CCLKCFG=xyz
25
26# File systems
27
28file-system	FFS		# UFS
29#file-system	LFS		# log-structured file system
30file-system	MFS		# memory file system
31file-system	NFS		# Network file system
32#file-system 	ADOSFS		# AmigaDOS-compatible file system
33file-system 	EXT2FS		# second extended file system (linux)
34#file-system	CD9660		# ISO 9660 + Rock Ridge file system
35file-system	MSDOSFS		# MS-DOS file system
36#file-system	FDESC		# /dev/fd
37#file-system    FILECORE        # Acorn filecore file system
38file-system	KERNFS		# /kern
39file-system	NULLFS		# loopback file system
40file-system	PROCFS		# /proc
41#file-system	PUFFS		# Userspace file systems (e.g. ntfs-3g & sshfs)
42#file-system	UMAPFS		# NULLFS + uid and gid remapping
43file-system	UNION		# union file system
44file-system	PTYFS		# /dev/pts/N support
45
46# File system options
47#options 	QUOTA		# legacy UFS quotas
48#options 	QUOTA2		# new, in-filesystem UFS quotas
49#options 	FFS_EI		# FFS Endian Independent support
50options 	NFSSERVER
51
52# Networking options
53
54#options 	GATEWAY		# packet forwarding
55options 	INET		# IP + ICMP + TCP + UDP
56options 	INET6		# IPV6
57#options 	IPSEC		# IP security
58#options 	IPSEC_DEBUG	# debug for IP security
59#options 	MROUTING	# IP multicast routing
60#options 	NETATALK	# AppleTalk networking
61#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
62#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
63#options 	PPP_DEFLATE	# Deflate compression support for PPP
64#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
65#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
66
67options 	NFS_BOOT_DHCP
68options 	NFS_BOOT_BOOTPARAM
69options 	NFS_BOOT_RWSIZE=1024
70
71# Compatibility options
72
73#options 	COMPAT_LINUX
74#options 	COMPAT_43	# 4.3BSD compatibility.
75options 	COMPAT_60	# NetBSD 6.0 compatibility.
76options 	COMPAT_50	# NetBSD 5.0 compatibility.
77options 	COMPAT_40	# NetBSD 4.0 compatibility.
78options 	COMPAT_30	# NetBSD 3.0 compatibility.
79#options 	COMPAT_20	# NetBSD 2.0 compatibility.
80#options 	COMPAT_16	# NetBSD 1.6 compatibility.
81#options 	COMPAT_15	# NetBSD 1.5 compatibility.
82#options 	COMPAT_14	# NetBSD 1.4 compatibility.
83#options 	COMPAT_13	# NetBSD 1.3 compatibility.
84#options 	COMPAT_12	# NetBSD 1.2 compatibility.
85#options 	COMPAT_11	# NetBSD 1.1 compatibility.
86#options 	COMPAT_10	# NetBSD 1.0 compatibility.
87#options 	COMPAT_09	# NetBSD 0.9 compatibility.
88#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
89
90# Shared memory options
91
92options 	SYSVMSG		# System V-like message queues
93options 	SYSVSEM		# System V-like semaphores
94options 	SYSVSHM		# System V-like memory sharing
95
96# Device options
97
98#options 	MEMORY_DISK_HOOKS	# boottime setup of ramdisk
99#options 	MEMORY_DISK_ROOT_SIZE=3400	# Size in blocks
100#options 	MEMORY_DISK_IS_ROOT	# use memory disk as root
101
102# Console options.  The default console is speed is 115200 bps.
103#options 	CONSPEED=9600		# Console speed
104
105# Miscellaneous kernel options
106options 	KTRACE		# system call tracing, a la ktrace(1)
107options 	IRQSTATS	# manage IRQ statistics
108#options 	KMEMSTATS	# kernel memory statistics
109#options 	SCSIVERBOSE	# Verbose SCSI errors
110#options 	PCIVERBOSE	# Verbose PCI descriptions
111#options 	MIIVERBOSE	# Verbose MII autoconfuration messages
112#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
113#options 	DDB_KEYCODE=0x40
114#options 	USERCONF	# userconf(4) support
115#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
116
117# Development and Debugging options
118
119#options 	PERFCTRS	# performance counters
120options 	DIAGNOSTIC	# internally consistency checks
121#options 	DEBUG
122#options 	PMAP_DEBUG	# Enable pmap_debug_level code
123#options 	VERBOSE_INIT_ARM # verbose bootstraping messages
124options 	DDB		# in-kernel debugger
125options		DDB_ONPANIC=1
126options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
127#makeoptions	DEBUG="-g"	# compile full symbol table
128options 	SYMTAB_SPACE=500000
129
130##options 	PMAP_INCLUDE_PTE_SYNC
131##options 	LOCKDEBUG
132
133config		netbsd		root on ? type ?
134
135# The main bus device
136mainbus0	at root
137
138# The boot CPU
139cpu0		at mainbus?
140
141# peripherals
142pxaip0		at mainbus0
143
144# interrupt controller & gpio pins
145pxaintc0	at pxaip0
146pxagpio0	at pxaip0
147
148# serial ports
149options 	COM_PXA2X0
150options 	FFUARTCONSOLE
151com0	at pxaip0 addr 0x40100000 intr 22  # FFUART
152com1	at pxaip0 addr 0x40200000 intr 21  # BTUART
153com2	at pxaip0 addr 0x40700000 intr 20
154
155# these two are not hanging off of pxaip, not really tested either
156#com3	at pxaip0 addr 0x14300000	# COM5
157#com4	at pxaip0 addr 0x14300010	# COM4
158
159# SMC91C111 ethernet
160sm0	at pxaip0 addr 0x08000300 intr 0
161
162# MII/PHY support
163sqphy*	at mii? phy ?			# Seeq 80220/80221/80223 PHYs
164
165# Pseudo-Devices
166
167# disk/mass storage pseudo-devices
168#pseudo-device	md			# memory disk device (ramdisk)
169pseudo-device	vnd			# disk-like interface to files
170#pseudo-device	fss			# file system snapshot device
171#pseudo-device	putter			# for puffs and pud
172
173# network pseudo-devices
174pseudo-device	bpfilter		# Berkeley packet filter
175pseudo-device	loop			# network loopback
176pseudo-device	kttcp			# network loopback
177
178# miscellaneous pseudo-devices
179pseudo-device	pty			# pseudo-terminals
180#options	RND_COM
181pseudo-device	clockctl		# user control of clock subsystem
182pseudo-device	ksyms			# /dev/ksyms
183
184# data mover pseudo-devices
185#pseudo-device	swdmover		# software dmover(9) back-end
186#pseudo-device	dmoverio		# /dev/dmover dmover(9) interface
187