VIPER revision 1.35 1 # $NetBSD: VIPER,v 1.35 2014/08/16 17:56:31 apb Exp $
2 #
3 # Arcom Viper
4 #
5
6 include "arch/evbarm/conf/std.viper"
7
8 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
9 #options MSGBUFSIZE=65536
10 #options KSTACK_CHECK_MAGIC
11
12 # estimated number of users
13 maxusers 32
14
15 # Standard system options
16
17 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
18 options NTP # NTP phase/frequency locked loop
19
20 # CPU options
21
22 options CPU_XSCALE_PXA250 # XScale PXA255
23 makeoptions CPUFLAGS="-mcpu=xscale"
24 #options CPU_XSCALE_CCLKCFG=xyz
25
26 # File systems
27
28 file-system FFS # UFS
29 #file-system LFS # log-structured file system
30 file-system MFS # memory file system
31 file-system NFS # Network file system
32 #file-system ADOSFS # AmigaDOS-compatible file system
33 file-system EXT2FS # second extended file system (linux)
34 #file-system CD9660 # ISO 9660 + Rock Ridge file system
35 file-system MSDOSFS # MS-DOS file system
36 #file-system FDESC # /dev/fd
37 #file-system FILECORE # Acorn filecore file system
38 file-system KERNFS # /kern
39 file-system NULLFS # loopback file system
40 file-system PROCFS # /proc
41 #file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs)
42 #file-system UMAPFS # NULLFS + uid and gid remapping
43 file-system UNION # union file system
44 file-system PTYFS # /dev/pts/N support
45
46 # File system options
47 #options QUOTA # legacy UFS quotas
48 #options QUOTA2 # new, in-filesystem UFS quotas
49 #options FFS_EI # FFS Endian Independent support
50 options NFSSERVER
51
52 # Networking options
53
54 #options GATEWAY # packet forwarding
55 options INET # IP + ICMP + TCP + UDP
56 options INET6 # IPV6
57 #options IPSEC # IP security
58 #options IPSEC_DEBUG # debug for IP security
59 #options MROUTING # IP multicast routing
60 #options NETATALK # AppleTalk networking
61 #options PPP_BSDCOMP # BSD-Compress compression support for PPP
62 #options PPP_DEFLATE # Deflate compression support for PPP
63 #options PPP_FILTER # Active filter support for PPP (requires bpf)
64 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
65
66 options NFS_BOOT_DHCP
67 options NFS_BOOT_BOOTPARAM
68 options NFS_BOOT_RWSIZE=1024
69
70 # Compatibility options
71
72 options COMPAT_NETBSD32 # allow running arm (e.g. non-earm) binaries
73 #options COMPAT_LINUX
74 #options COMPAT_43 # 4.3BSD compatibility.
75 options COMPAT_70 # NetBSD 7.0 compatibility.
76 options COMPAT_60 # NetBSD 6.0 compatibility.
77 options COMPAT_50 # NetBSD 5.0 compatibility.
78 options COMPAT_40 # NetBSD 4.0 compatibility.
79 options COMPAT_30 # NetBSD 3.0 compatibility.
80 #options COMPAT_20 # NetBSD 2.0 compatibility.
81 #options COMPAT_16 # NetBSD 1.6 compatibility.
82 #options COMPAT_15 # NetBSD 1.5 compatibility.
83 #options COMPAT_14 # NetBSD 1.4 compatibility.
84 #options COMPAT_13 # NetBSD 1.3 compatibility.
85 #options COMPAT_12 # NetBSD 1.2 compatibility.
86 #options COMPAT_11 # NetBSD 1.1 compatibility.
87 #options COMPAT_10 # NetBSD 1.0 compatibility.
88 #options COMPAT_09 # NetBSD 0.9 compatibility.
89 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
90
91 # Shared memory options
92
93 options SYSVMSG # System V-like message queues
94 options SYSVSEM # System V-like semaphores
95 options SYSVSHM # System V-like memory sharing
96
97 # Device options
98
99 #options MEMORY_DISK_HOOKS # boottime setup of ramdisk
100 #options MEMORY_DISK_ROOT_SIZE=3400 # Size in blocks
101 #options MEMORY_DISK_IS_ROOT # use memory disk as root
102
103 # Console options. The default console is speed is 115200 bps.
104 #options CONSPEED=9600 # Console speed
105
106 # Miscellaneous kernel options
107 options KTRACE # system call tracing, a la ktrace(1)
108 options IRQSTATS # manage IRQ statistics
109 #options KMEMSTATS # kernel memory statistics
110 #options SCSIVERBOSE # Verbose SCSI errors
111 #options PCIVERBOSE # Verbose PCI descriptions
112 #options MIIVERBOSE # Verbose MII autoconfuration messages
113 #options PCI_CONFIG_DUMP # verbosely dump PCI config space
114 #options DDB_KEYCODE=0x40
115 #options USERCONF # userconf(4) support
116 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
117
118 # Development and Debugging options
119
120 #options PERFCTRS # performance counters
121 options DIAGNOSTIC # internal consistency checks
122 #options DEBUG
123 #options PMAP_DEBUG # Enable pmap_debug_level code
124 #options VERBOSE_INIT_ARM # verbose bootstraping messages
125 options DDB # in-kernel debugger
126 options DDB_ONPANIC=1
127 options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
128 #makeoptions DEBUG="-g" # compile full symbol table
129 options SYMTAB_SPACE=500000
130
131 ##options PMAP_INCLUDE_PTE_SYNC
132 ##options LOCKDEBUG
133
134 config netbsd root on ? type ?
135
136 # The main bus device
137 mainbus0 at root
138
139 # The boot CPU
140 cpu0 at mainbus?
141
142 # peripherals
143 pxaip0 at mainbus0
144
145 # interrupt controller & gpio pins
146 pxaintc0 at pxaip0
147 pxagpio0 at pxaip0
148
149 # serial ports
150 options COM_PXA2X0
151 options FFUARTCONSOLE
152 com0 at pxaip0 addr 0x40100000 intr 22 # FFUART
153 com1 at pxaip0 addr 0x40200000 intr 21 # BTUART
154 com2 at pxaip0 addr 0x40700000 intr 20
155
156 # these two are not hanging off of pxaip, not really tested either
157 #com3 at pxaip0 addr 0x14300000 # COM5
158 #com4 at pxaip0 addr 0x14300010 # COM4
159
160 # SMC91C111 ethernet
161 sm0 at pxaip0 addr 0x08000300 intr 0
162
163 # MII/PHY support
164 sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
165
166 # Pseudo-Devices
167
168 # disk/mass storage pseudo-devices
169 #pseudo-device md # memory disk device (ramdisk)
170 pseudo-device vnd # disk-like interface to files
171 #pseudo-device fss # file system snapshot device
172 #pseudo-device putter # for puffs and pud
173
174 # network pseudo-devices
175 pseudo-device bpfilter # Berkeley packet filter
176 pseudo-device loop # network loopback
177 pseudo-device kttcp # network loopback
178
179 # miscellaneous pseudo-devices
180 pseudo-device pty # pseudo-terminals
181 #options RND_COM
182 pseudo-device clockctl # user control of clock subsystem
183 pseudo-device ksyms # /dev/ksyms
184
185 # data mover pseudo-devices
186 #pseudo-device swdmover # software dmover(9) back-end
187 #pseudo-device dmoverio # /dev/dmover dmover(9) interface
188